235 lines
9.4 KiB
Lua
235 lines
9.4 KiB
Lua
-- Prosody Example Configuration File
|
|
--
|
|
-- Information on configuring Prosody can be found on our
|
|
-- website at https://prosody.im/doc/configure
|
|
--
|
|
-- Tip: You can check that the syntax of this file is correct
|
|
-- when you have finished by running this command:
|
|
-- prosodyctl check config
|
|
-- If there are any errors, it will let you know what and where
|
|
-- they are, otherwise it will keep quiet.
|
|
--
|
|
-- The only thing left to do is rename this file to remove the .dist ending, and fill in the
|
|
-- blanks. Good luck, and happy Jabbering!
|
|
|
|
pidfile = "/var/run/prosody/prosody.pid"
|
|
-- interfaces = { "192.168.0.67", "fd01::67" }
|
|
|
|
---------- Server-wide settings ----------
|
|
-- Settings in this section apply to the whole server and are the default settings
|
|
-- for any virtual hosts
|
|
|
|
-- This is a (by default, empty) list of accounts that are admins
|
|
-- for the server. Note that you must create the accounts separately
|
|
-- (see https://prosody.im/doc/creating_accounts for info)
|
|
-- Example: admins = { "user1@example.com", "user2@example.net" }
|
|
admins = { "focus@auth.meet.ahlawat.com" }
|
|
|
|
-- Enable use of libevent for better performance under high load
|
|
-- For more information see: https://prosody.im/doc/libevent
|
|
--use_libevent = true
|
|
|
|
-- Prosody will always look in its source directory for modules, but
|
|
-- this option allows you to specify additional locations where Prosody
|
|
-- will look for modules first. For community modules, see https://modules.prosody.im/
|
|
--plugin_paths = {}
|
|
|
|
-- This is the list of modules Prosody will load on startup.
|
|
-- It looks for mod_modulename.lua in the plugins folder, so make sure that exists too.
|
|
-- Documentation for bundled modules can be found at: https://prosody.im/doc/modules
|
|
modules_enabled = {
|
|
|
|
-- Generally required
|
|
"roster"; -- Allow users to have a roster. Recommended ;)
|
|
"saslauth"; -- Authentication for clients and servers. Recommended if you want to log in.
|
|
"tls"; -- Add support for secure TLS on c2s/s2s connections
|
|
"dialback"; -- s2s dialback support
|
|
"disco"; -- Service discovery
|
|
|
|
-- Not essential, but recommended
|
|
"carbons"; -- Keep multiple clients in sync
|
|
"pep"; -- Enables users to publish their avatar, mood, activity, playing music and more
|
|
"private"; -- Private XML storage (for room bookmarks, etc.)
|
|
"blocklist"; -- Allow users to block communications with other users
|
|
"vcard4"; -- User profiles (stored in PEP)
|
|
"vcard_legacy"; -- Conversion between legacy vCard and PEP Avatar, vcard
|
|
|
|
-- Nice to have
|
|
"version"; -- Replies to server version requests
|
|
"uptime"; -- Report how long server has been running
|
|
"time"; -- Let others know the time here on this server
|
|
"ping"; -- Replies to XMPP pings with pongs
|
|
"register"; -- Allow users to register on this server using a client and change passwords
|
|
--"mam"; -- Store messages in an archive and allow users to access it
|
|
--"csi_simple"; -- Simple Mobile optimizations
|
|
|
|
-- Admin interfaces
|
|
"admin_adhoc"; -- Allows administration via an XMPP client that supports ad-hoc commands
|
|
--"admin_telnet"; -- Opens telnet console interface on localhost port 5582
|
|
|
|
-- HTTP modules
|
|
--"bosh"; -- Enable BOSH clients, aka "Jabber over HTTP"
|
|
--"websocket"; -- XMPP over WebSockets
|
|
--"http_files"; -- Serve static files from a directory over HTTP
|
|
|
|
-- Other specific functionality
|
|
--"limits"; -- Enable bandwidth limiting for XMPP connections
|
|
--"groups"; -- Shared roster support
|
|
--"server_contact_info"; -- Publish contact information for this service
|
|
--"announce"; -- Send announcement to all online users
|
|
--"welcome"; -- Welcome users who register accounts
|
|
--"watchregistrations"; -- Alert admins of registrations
|
|
--"motd"; -- Send a message to users when they log in
|
|
--"legacyauth"; -- Legacy authentication. Only used by some old clients and bots.
|
|
--"proxy65"; -- Enables a file transfer proxy service which clients behind NAT can use
|
|
}
|
|
|
|
-- These modules are auto-loaded, but should you want
|
|
-- to disable them then uncomment them here:
|
|
modules_disabled = {
|
|
-- "offline"; -- Store offline messages
|
|
-- "c2s"; -- Handle client connections
|
|
-- "s2s"; -- Handle server-to-server connections
|
|
-- "posix"; -- POSIX functionality, sends server to background, enables syslog, etc.
|
|
}
|
|
|
|
-- Disable account creation by default, for security
|
|
-- For more information see https://prosody.im/doc/creating_accounts
|
|
allow_registration = false
|
|
|
|
-- Force clients to use encrypted connections? This option will
|
|
-- prevent clients from authenticating unless they are using encryption.
|
|
|
|
c2s_require_encryption = true
|
|
|
|
-- Force servers to use encrypted connections? This option will
|
|
-- prevent servers from authenticating unless they are using encryption.
|
|
|
|
s2s_require_encryption = true
|
|
|
|
-- Force certificate authentication for server-to-server connections?
|
|
|
|
s2s_secure_auth = false
|
|
|
|
-- Some servers have invalid or self-signed certificates. You can list
|
|
-- remote domains here that will not be required to authenticate using
|
|
-- certificates. They will be authenticated using DNS instead, even
|
|
-- when s2s_secure_auth is enabled.
|
|
|
|
--s2s_insecure_domains = { "insecure.example" }
|
|
|
|
-- Even if you disable s2s_secure_auth, you can still require valid
|
|
-- certificates for some domains by specifying a list here.
|
|
|
|
--s2s_secure_domains = { "jabber.org" }
|
|
|
|
-- Select the authentication backend to use. The 'internal' providers
|
|
-- use Prosody's configured data storage to store the authentication data.
|
|
|
|
authentication = "internal_hashed"
|
|
|
|
-- Select the storage backend to use. By default Prosody uses flat files
|
|
-- in its configured data directory, but it also supports more backends
|
|
-- through modules. An "sql" backend is included by default, but requires
|
|
-- additional dependencies. See https://prosody.im/doc/storage for more info.
|
|
|
|
--storage = "sql" -- Default is "internal"
|
|
|
|
-- For the "sql" backend, you can uncomment *one* of the below to configure:
|
|
--sql = { driver = "SQLite3", database = "prosody.sqlite" } -- Default. 'database' is the filename.
|
|
--sql = { driver = "MySQL", database = "prosody", username = "prosody", password = "secret", host = "localhost" }
|
|
--sql = { driver = "PostgreSQL", database = "prosody", username = "prosody", password = "secret", host = "localhost" }
|
|
|
|
|
|
-- Archiving configuration
|
|
-- If mod_mam is enabled, Prosody will store a copy of every message. This
|
|
-- is used to synchronize conversations between multiple clients, even if
|
|
-- they are offline. This setting controls how long Prosody will keep
|
|
-- messages in the archive before removing them.
|
|
|
|
archive_expires_after = "1w" -- Remove archived messages after 1 week
|
|
|
|
-- You can also configure messages to be stored in-memory only. For more
|
|
-- archiving options, see https://prosody.im/doc/modules/mod_mam
|
|
|
|
-- Logging configuration
|
|
-- For advanced logging see https://prosody.im/doc/logging
|
|
log = {
|
|
info = "prosody.log"; -- Change 'info' to 'debug' for verbose logging
|
|
error = "prosody.err";
|
|
-- "*syslog"; -- Uncomment this for logging to syslog
|
|
-- "*console"; -- Log to the console, useful for debugging with daemonize=false
|
|
}
|
|
|
|
-- Uncomment to enable statistics
|
|
-- For more info see https://prosody.im/doc/statistics
|
|
-- statistics = "internal"
|
|
|
|
-- Certificates
|
|
-- Every virtual host and component needs a certificate so that clients and
|
|
-- servers can securely verify its identity. Prosody will automatically load
|
|
-- certificates/keys from the directory specified here.
|
|
-- For more information, including how to use 'prosodyctl' to auto-import certificates
|
|
-- (from e.g. Let's Encrypt) see https://prosody.im/doc/certificates
|
|
|
|
-- Location of directory to find certificates in (relative to main config file):
|
|
-- certificates = "certs"
|
|
certificates = "/mnt/certs"
|
|
|
|
-- HTTPS currently only supports a single certificate, specify it here:
|
|
--https_certificate = "/usr/local/etc/prosody/certs/localhost.crt"
|
|
https_certificate = "/mnt/certs/haproxy.pem"
|
|
|
|
----------- Virtual hosts -----------
|
|
-- You need to add a VirtualHost entry for each domain you wish Prosody to serve.
|
|
-- Settings under each VirtualHost entry apply *only* to that host.
|
|
|
|
-- VirtualHost "localhost"
|
|
|
|
VirtualHost "meet.ahlawat.com"
|
|
ssl = {
|
|
key = "/mnt/certs/privkeyr.pem";
|
|
certificate = "/mnt/certs/fullchain.pem";
|
|
}
|
|
authentication = "anonymous"
|
|
modules_enabled = {
|
|
"bosh";
|
|
"pubsub";
|
|
}
|
|
c2s_require_encryption = false
|
|
|
|
-- certificate = "/path/to/example.crt"
|
|
|
|
------ Components ------
|
|
-- You can specify components to add hosts that provide special services,
|
|
-- like multi-user conferences, and transports.
|
|
-- For more information on components, see https://prosody.im/doc/components
|
|
|
|
---Set up a MUC (multi-user chat) room server on conference.example.com:
|
|
--Component "conference.example.com" "muc"
|
|
|
|
Component "conference.meet.ahlawat.com" "muc"
|
|
Component "jitsi-videobridge.meet.ahlawat.com"
|
|
component_secret = "YOURSECRET1-qwertyuiop"
|
|
Component "focus.meet.ahlawat.com"
|
|
component_secret = "YOURSECRET2-qwertyuiop"
|
|
|
|
--- Store MUC messages in an archive and allow users to access it
|
|
--modules_enabled = { "muc_mam" }
|
|
|
|
---Set up an external component (default component port is 5347)
|
|
--
|
|
-- External components allow adding various services, such as gateways/
|
|
-- transports to other networks like ICQ, MSN and Yahoo. For more info
|
|
-- see: https://prosody.im/doc/components#adding_an_external_component
|
|
--
|
|
--Component "gateway.example.com"
|
|
-- component_secret = "password"
|
|
|
|
VirtualHost "auth.meet.ahlawat.com"
|
|
ssl = {
|
|
key = "/var/db/prosody/auth.meet.ahlawat.com.key";
|
|
certificate = "/var/db/prosody/auth.meet.ahlawat.com.crt";
|
|
}
|
|
authentication = "internal_hashed"
|