From 0b980a7f425b70075965775c8bbb73dd012447f6 Mon Sep 17 00:00:00 2001 From: Shivam Maurya <54358380+shvmm@users.noreply.github.com> Date: Tue, 14 Jan 2025 20:00:43 +0530 Subject: [PATCH] Create board_xiao-s3.yaml --- packages/board/board_xiao-s3.yaml | 103 ++++++++++++++++++++++++++++++ 1 file changed, 103 insertions(+) create mode 100644 packages/board/board_xiao-s3.yaml diff --git a/packages/board/board_xiao-s3.yaml b/packages/board/board_xiao-s3.yaml new file mode 100644 index 0000000..ee3ae50 --- /dev/null +++ b/packages/board/board_xiao-s3.yaml @@ -0,0 +1,103 @@ +# Updated : 2025.01.14 +# Version : 1.0 +# GitHub : https://github.com/Sleeper85/esphome-yambms + +# YamBMS ( Yet another multi-BMS Merging Solution ) + +# This YAML is free software: you can redistribute it and/or +# modify it under the terms of the GNU General Public License +# as published by the Free Software Foundation, either version 3 +# of the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. +# See the GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see . + +substitutions: + board_chip: "ESP32-S3" + board_name: "DevKitC-1" + +esp32: + board: esp32-s3-devkitc-1 + flash_size: 8MB # adjust according to your ESP32-S3 version + framework: + type: esp-idf + +esphome: + platformio_options: + board_build.flash_mode: dio # use Dual IO (dio) instead of Quad IO (qio) to prevent boot loop after flashing + board_upload.maximum_ram_size: 524288 # total size of the internal RAM in bits, it's the same for all ESP32-S3 ( 512KB ) + +# PSRAM activation and settings +psram: + mode: octal + speed: 80MHz + +# <<: !include board_psram_settings.yaml + +wifi: + id: my_network + ssid: !secret wifi_ssid + password: !secret wifi_password + domain: !secret domain + ap: + ssid: "YamBMS Fallback Hotspot" + password: "Y4mBM$85" + +captive_portal: + +logger: + baud_rate: 0 # frees the 3rd UART and avoids some bugs like "WK2168 with canbus" or "BLE client with RS485 modbus" + hardware_uart: USB_SERIAL_JTAG + +uart: + # UART 0 : USB UART port used for ESP32 flashing and logs, can be released if necessary (tx_pin: 43, rx_pin: 44) + # UART 1 + - id: uart_esp_1 + tx_pin: 2 + rx_pin: 1 + baud_rate: 115200 + rx_buffer_size: 512 + # UART 2 + - id: uart_esp_2 + tx_pin: 4 + rx_pin: 3 + baud_rate: 115200 + rx_buffer_size: 512 + # UART 3 + - id: uart_esp_3 + tx_pin: 9 + rx_pin: 10 + baud_rate: 115200 + rx_buffer_size: 512 + +canbus: + # CANBUS NODE 1 + - platform: esp32_can + id: canbus_node1 + tx_pin: 5 # to CAN board CTX + rx_pin: 6 # to CAN board CRX (with 4.7K resistor except for SN65HVD230) + can_id: 1 + bit_rate: 500kbps + +# +--------------------------------------+ +# | Inverter Heartbeat Light | +# +--------------------------------------+ + +light: + # ESP Light used to see the inverter heartbeat + # Internal : only specifying an id without a name will implicitly set this to true. + - platform: binary + output: esp_led + id: esp_light + +output: + # ESP LED + - platform: gpio + pin: GPIO21 + id: esp_led + inverted: true