From 0edda3cd66ba7352dc433484783e5e394bf0bf83 Mon Sep 17 00:00:00 2001 From: Sleeper85 Date: Sun, 16 Nov 2025 15:23:27 +0100 Subject: [PATCH] Fixed link to `Downgrading to 19.10` --- documents/README/BMS_JK-PB.md | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/documents/README/BMS_JK-PB.md b/documents/README/BMS_JK-PB.md index d30d235..08bfd03 100644 --- a/documents/README/BMS_JK-PB.md +++ b/documents/README/BMS_JK-PB.md @@ -11,7 +11,7 @@ > This behavior changes with **firmware > V19.10**. > Using **DIP switch addresses 1 to 15** does not reliably guarantee that the **UART2 (RS485-2)** port protocol will be automatically configured to **001 - JK BMS RS485 Modbus V1.0**, which allows **YamBMS** to access BMS information. > The alternative solution is to use the **UART1 (RS485-1)** port configured with the **001 - JK BMS RS485 Modbus V1.0** protocol from the JK application. -> Downgrading to **V19.10** does not guarantee to correct this problem, [please read this information before downgrading](BMS_JK-PB#downgrading-to-1910). +> Downgrading to **V19.10** does not guarantee to correct this problem, [please read this information before downgrading](BMS_JK-PB.md#downgrading-to-1910). > [!IMPORTANT] > The most important thing for proper functioning of YamBMS is that **the voltage of your BMS is well calibrated**.