diff --git a/documents/README/changelog/Changelog_upgrade_to_YamBMS_1.8.1.md b/documents/README/changelog/Changelog_upgrade_to_YamBMS_1.8.1.md index a1bf6a9..8d33499 100644 --- a/documents/README/changelog/Changelog_upgrade_to_YamBMS_1.8.1.md +++ b/documents/README/changelog/Changelog_upgrade_to_YamBMS_1.8.1.md @@ -28,6 +28,11 @@ have made the changes below. CAN and RS485 links can run at the same time: keep both blocks, each link with its own `canbus_id` or `rs485_id`. The dashboard shows up to 3 CAN links and 3 RS485 links. If you only use RS485, comment out the CAN block. +- **Balancing inferred:** EG4 LL V2, Seplos V1/V2, Seplos V3 and JK RS485 DISPLAY do not report + balancing, and YamBMS now infers it from the cell spread. While a pack is seen as balancing, the + charge only ends when the spread closes or the EOC timer expires, and the SoC stays at 98% until + then. Set `bms_balance_trigger_voltage` to your BMS's actual setting and keep `EOC timer enabled` + ON. See [Fake Equalizing](Changelog_Fake_Equalizing.md). ## How to update from 1.7.0 or 1.8.0