diff --git a/README.md b/README.md index dab1475..ee9e89f 100644 --- a/README.md +++ b/README.md @@ -7,6 +7,10 @@ ![GitHub watchers](https://img.shields.io/github/watchers/Sleeper85/esphome-yambms) [!["Buy Me A Coffee"](https://img.shields.io/badge/buy%20me%20a%20coffee-donate-yellow.svg)](https://www.buymeacoffee.com/sleeper85) +> [!TIP] +> This page contains many links to other README. +> If you don't find answers to your questions, [you'll find all the README in this folder](documents/README). + > [!TIP] > Not sure which YAML to choose ? ... [YamBMS_Remote_Packages_example.yaml](YamBMS_Remote_Packages_example.yaml) > is a good basis for creating your custom YAML. @@ -130,7 +134,7 @@ rx_pin: 22 # to CAN board CRX (with 4.7K resistor except for SN65HVD230) ## Requirements -* [ESPHome 2025.11.0 or higher](https://github.com/esphome/esphome/releases) +* [ESPHome 2026.1.4 or higher](https://github.com/esphome/esphome/releases) * ESP32 MCU (buying a board with ≥8MB flash is advised if you intend to monitor multiple BMS) * CAN transceiver (only with TJA1050/TJA1051 => 4.7K resistor for 5V to 3V3 level shifing) * BMS JK, JBD, Seplos (other BMS brands already integrated with ESPhome can be added easily) diff --git a/packages/base/device_base_esphome.yaml b/packages/base/device_base_esphome.yaml index bdd393e..bfd15f3 100644 --- a/packages/base/device_base_esphome.yaml +++ b/packages/base/device_base_esphome.yaml @@ -1,4 +1,4 @@ -# Updated : 2026.01.30 +# Updated : 2026.02.09 # Version : 1.7.0 # GitHub : https://github.com/Sleeper85/esphome-yambms @@ -28,4 +28,4 @@ esphome: project: name: Sleeper85.YamBMS version: ${yambms_version} - min_version: 2026.1.3 + min_version: 2026.1.4