diff --git a/.github/FUNDING.yml b/.github/FUNDING.yml
index 49525a3..a89685a 100644
--- a/.github/FUNDING.yml
+++ b/.github/FUNDING.yml
@@ -1 +1,2 @@
buy_me_a_coffee: sleeper85
+custom: ["https://paypal.me/Sleeper85"]
diff --git a/README.md b/README.md
index 98ffa8a..347cd4c 100644
--- a/README.md
+++ b/README.md
@@ -5,7 +5,7 @@



-[](https://www.buymeacoffee.com/sleeper85)
+[](#support)
> [!TIP]
> This page contains many links to other README.
@@ -25,13 +25,19 @@
> [!IMPORTANT]
> The most important thing for proper functioning of YamBMS is that **the voltage of your BMS is well calibrated**.
-> YamBMS logic is based on the `min_cell_voltage` and `max_cell_voltage` voltages of your `BMS`.
-> If you use `YamBMS`, the internal charging logic of the `JK-PB BMS` will not be used.
-> Please read the [documentation](README.md#contents) and the [setup instructions](documents/README/Hardware_and_schematic_instructions.md).
+> YamBMS logic is based on the cell voltages of your `BMS`.
-| ESPHome application to `combine` information coming from
your `BMS / Balancer / Shunt` and adds a smart layer before
transmitting instructions to your inverter on `RS485 or CAN bus`
using the protocols `PYLON`, `SMA`, `Victron` or `LuxPower` (EG4). |
|
-| --- | --- |
-| **Note: Pylontech uses 15S/48V and many others uses 16S/51.2V !**
Other battery profiles that utilise the **`PYLON`** protocol with different cell counts
may also work, e.g. Alpha Ess Smile, BYD Battery-Box LV Flex Lite.
Select the correct battery profile in the inverter to match your battery pack !
**DISCLAIMER:** Working with battery systems involves electrical hazards.
Please read the complete documentation before installation and use
this project at your own risk. |
|
+> [!CAUTION]
+> **DISCLAIMER:** Working with battery systems involves electrical hazards.
+> Please read the [documentation](README.md#contents) and the [setup instructions](documents/README/Hardware_and_schematic_instructions.md)
+> before installation and use this project at your own risk.
+
+ESPHome application to `combine` information coming from your `BMS / Balancer / Shunt` and adds a smart layer before transmitting instructions to your inverter on `RS485 or CAN bus` using the protocols `PYLON`, `SMA`, `Victron` or `LuxPower` (EG4).
+
+**Note: Pylontech uses 15S/48V and many others uses 16S/51.2V !**
+
+Other battery profiles that utilise the **`PYLON`** protocol with different cell counts may also work, e.g. Alpha Ess Smile, BYD Battery-Box LV Flex Lite.
+Select the correct battery profile in the inverter to match your battery pack !
**Sends over CAN / RS485 bus to your inverter :**
- Battery Voltage
@@ -190,3 +196,15 @@ rx_pin: 22 # to CAN board CRX (with 4.7K resistor except for SN65HVD230)
* Thanks to [@Fahmula](https://github.com/Fahmula) for developing the `PYLON RS485` component.
* Thanks to [@uksa007](https://www.patreon.com/Uksa007Codedevelopment) for the development of the first CANBUS code.
* Thanks to all the [contributors](https://github.com/Sleeper85/esphome-yambms/graphs/contributors).
+
+## Support
+
+YamBMS is free and open source, and will stay that way — no paid features,
+no supporter-only functions, no locked code.
+
+Hosting, the domain and the tools I use to develop it come to about $300 a year,
+out of my own pocket. If YamBMS saved you time or money, a coffee helps cover
+the bill. It doesn't buy anything — the project stays exactly the same either way.
+
+[](https://www.buymeacoffee.com/sleeper85)
+[](https://paypal.me/Sleeper85)