diff --git a/YamBMS_LP_DEMO.yaml b/YamBMS_LP_DEMO.yaml index e19a88f..34c5d4a 100644 --- a/YamBMS_LP_DEMO.yaml +++ b/YamBMS_LP_DEMO.yaml @@ -1,4 +1,4 @@ -# Updated : 2026.11.08 +# Updated : 2026.11.19 # Version : 1.8.2 # GitHub : https://github.com/Sleeper85/esphome-yambms @@ -285,6 +285,11 @@ packages: bms_cell_ovp: '3.650' # V Used by 'Auto CCL' functions bms_cell_uvp: '2.800' # V Used by 'Auto DCL' functions and to calculate maximum discharge voltage bms_balance_trigger_voltage: '0.010' # V Used by 'Auto CVL' functions + # Fake Equalizing: this BMS does not report its balancing state. When enabled, YamBMS infers it + # from the cell spread and holds the Cut-Off timer while the pack balances, instead of ending the charge. + # Warning: a BMS without a balancer (or with balancing disabled) never closes its cell spread, so it can + # stay in Cut-Off a long time, until the EOC timer (30min default) ends the charge, or forever if disabled. + bms_fake_equalizing_enabled: 'true' # true/false, false by default bms_charging_cycles: '178' # charging cycles number Used to calculate the SoH bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable @@ -307,6 +312,11 @@ packages: bms_cell_ovp: '3.650' # V Used by 'Auto CCL' functions bms_cell_uvp: '2.800' # V Used by 'Auto DCL' functions and to calculate maximum discharge voltage bms_balance_trigger_voltage: '0.010' # V Used by 'Auto CVL' functions + # Fake Equalizing: this BMS does not report its balancing state. When enabled, YamBMS infers it + # from the cell spread and holds the Cut-Off timer while the pack balances, instead of ending the charge. + # Warning: a BMS without a balancer (or with balancing disabled) never closes its cell spread, so it can + # stay in Cut-Off a long time, until the EOC timer (30min default) ends the charge, or forever if disabled. + bms_fake_equalizing_enabled: 'true' # true/false, false by default bms_charging_cycles: '226' # charging cycles number Used to calculate the SoH bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable @@ -329,6 +339,11 @@ packages: bms_cell_ovp: '3.650' # V Used by 'Auto CCL' functions bms_cell_uvp: '2.800' # V Used by 'Auto DCL' functions and to calculate maximum discharge voltage bms_balance_trigger_voltage: '0.010' # V Used by 'Auto CVL' functions + # Fake Equalizing: this BMS does not report its balancing state. When enabled, YamBMS infers it + # from the cell spread and holds the Cut-Off timer while the pack balances, instead of ending the charge. + # Warning: a BMS without a balancer (or with balancing disabled) never closes its cell spread, so it can + # stay in Cut-Off a long time, until the EOC timer (30min default) ends the charge, or forever if disabled. + bms_fake_equalizing_enabled: 'true' # true/false, false by default bms_charging_cycles: '194' # charging cycles number Used to calculate the SoH bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable diff --git a/YamBMS_RP_BMS_EG4_RS485.yaml b/YamBMS_RP_BMS_EG4_RS485.yaml index 4f79608..5462f34 100644 --- a/YamBMS_RP_BMS_EG4_RS485.yaml +++ b/YamBMS_RP_BMS_EG4_RS485.yaml @@ -1,4 +1,4 @@ -# Updated : 2026.11.08 +# Updated : 2026.11.19 # Version : 1.8.2 # GitHub : https://github.com/Sleeper85/esphome-yambms @@ -270,6 +270,11 @@ packages: ## BMS address must start at 2 with EG4 LLV2, ID 1 is a special case and has different output. bms_address: 2 # BMS 1 modbus address bms_balance_trigger_voltage: '0.030' # V. Cell spread at which the BMS balances, set yours + # Fake Equalizing: this BMS does not report its balancing state. When enabled, YamBMS infers it + # from the cell spread and holds the Cut-Off timer while the pack balances, instead of ending the charge. + # Warning: a BMS without a balancer (or with balancing disabled) never closes its cell spread, so it can + # stay in Cut-Off a long time, until the EOC timer (30min default) ends the charge, or forever if disabled. + bms_fake_equalizing_enabled: 'false' # true/false, false by default bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable # BMS 2 - path: 'packages/bms/bms_combine_EG4_LLV2_RS485_bms_full.yaml' @@ -278,6 +283,11 @@ packages: bms_name: 'EG4-BMS 2' bms_address: 3 # BMS 2 modbus address bms_balance_trigger_voltage: '0.030' # V. Cell spread at which the BMS balances, set yours + # Fake Equalizing: this BMS does not report its balancing state. When enabled, YamBMS infers it + # from the cell spread and holds the Cut-Off timer while the pack balances, instead of ending the charge. + # Warning: a BMS without a balancer (or with balancing disabled) never closes its cell spread, so it can + # stay in Cut-Off a long time, until the EOC timer (30min default) ends the charge, or forever if disabled. + bms_fake_equalizing_enabled: 'false' # true/false, false by default bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable # BMS 3 - path: 'packages/bms/bms_combine_EG4_LLV2_RS485_bms_full.yaml' @@ -286,6 +296,11 @@ packages: bms_name: 'EG4-BMS 3' bms_address: 4 # BMS 3 modbus address bms_balance_trigger_voltage: '0.030' # V. Cell spread at which the BMS balances, set yours + # Fake Equalizing: this BMS does not report its balancing state. When enabled, YamBMS infers it + # from the cell spread and holds the Cut-Off timer while the pack balances, instead of ending the charge. + # Warning: a BMS without a balancer (or with balancing disabled) never closes its cell spread, so it can + # stay in Cut-Off a long time, until the EOC timer (30min default) ends the charge, or forever if disabled. + bms_fake_equalizing_enabled: 'false' # true/false, false by default bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable diff --git a/YamBMS_RP_BMS_SEPLOS_V1_V2_RS485_Modbus.yaml b/YamBMS_RP_BMS_SEPLOS_V1_V2_RS485_Modbus.yaml index 92ed7f7..7f172c3 100644 --- a/YamBMS_RP_BMS_SEPLOS_V1_V2_RS485_Modbus.yaml +++ b/YamBMS_RP_BMS_SEPLOS_V1_V2_RS485_Modbus.yaml @@ -1,4 +1,4 @@ -# Updated : 2026.11.08 +# Updated : 2026.11.19 # Version : 1.8.2 # GitHub : https://github.com/Sleeper85/esphome-yambms @@ -277,6 +277,11 @@ packages: bms_cell_ovp: '3.650' # V. Used by 'Auto CCL' functions bms_cell_uvp: '2.800' # V. Used by 'Auto DCL' functions and to calculate maximum discharge voltage bms_balance_trigger_voltage: '0.010' # V. Used by 'Auto CVL' functions + # Fake Equalizing: this BMS does not report its balancing state. When enabled, YamBMS infers it + # from the cell spread and holds the Cut-Off timer while the pack balances, instead of ending the charge. + # Warning: a BMS without a balancer (or with balancing disabled) never closes its cell spread, so it can + # stay in Cut-Off a long time, until the EOC timer (30min default) ends the charge, or forever if disabled. + bms_fake_equalizing_enabled: 'false' # true/false, false by default bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable # BMS 2 - path: 'packages/bms/bms_combine_SEPLOS_V1_V2_RS485_bms_full.yaml' @@ -293,6 +298,11 @@ packages: bms_cell_ovp: '3.650' # V. Used by 'Auto CCL' functions bms_cell_uvp: '2.800' # V. Used by 'Auto DCL' functions and to calculate maximum discharge voltage bms_balance_trigger_voltage: '0.010' # V. Used by 'Auto CVL' functions + # Fake Equalizing: this BMS does not report its balancing state. When enabled, YamBMS infers it + # from the cell spread and holds the Cut-Off timer while the pack balances, instead of ending the charge. + # Warning: a BMS without a balancer (or with balancing disabled) never closes its cell spread, so it can + # stay in Cut-Off a long time, until the EOC timer (30min default) ends the charge, or forever if disabled. + bms_fake_equalizing_enabled: 'false' # true/false, false by default bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable # BMS 3 - path: 'packages/bms/bms_combine_SEPLOS_V1_V2_RS485_bms_full.yaml' @@ -309,6 +319,11 @@ packages: bms_cell_ovp: '3.650' # V. Used by 'Auto CCL' functions bms_cell_uvp: '2.800' # V. Used by 'Auto DCL' functions and to calculate maximum discharge voltage bms_balance_trigger_voltage: '0.010' # V. Used by 'Auto CVL' functions + # Fake Equalizing: this BMS does not report its balancing state. When enabled, YamBMS infers it + # from the cell spread and holds the Cut-Off timer while the pack balances, instead of ending the charge. + # Warning: a BMS without a balancer (or with balancing disabled) never closes its cell spread, so it can + # stay in Cut-Off a long time, until the EOC timer (30min default) ends the charge, or forever if disabled. + bms_fake_equalizing_enabled: 'false' # true/false, false by default bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable diff --git a/YamBMS_RP_BMS_SEPLOS_V3_RS485_Modbus_sniffer.yaml b/YamBMS_RP_BMS_SEPLOS_V3_RS485_Modbus_sniffer.yaml index 828f23a..4809f86 100644 --- a/YamBMS_RP_BMS_SEPLOS_V3_RS485_Modbus_sniffer.yaml +++ b/YamBMS_RP_BMS_SEPLOS_V3_RS485_Modbus_sniffer.yaml @@ -1,4 +1,4 @@ -# Updated : 2026.11.08 +# Updated : 2026.11.19 # Version : 1.8.2 # GitHub : https://github.com/Sleeper85/esphome-yambms @@ -278,6 +278,11 @@ packages: bms_cell_ovp: '3.650' # V. Used by 'Auto CCL' functions bms_cell_uvp: '2.800' # V. Used by 'Auto DCL' functions and to calculate maximum discharge voltage bms_balance_trigger_voltage: '0.010' # V. Used by 'Auto CVL' functions + # Fake Equalizing: this BMS does not report its balancing state. When enabled, YamBMS infers it + # from the cell spread and holds the Cut-Off timer while the pack balances, instead of ending the charge. + # Warning: a BMS without a balancer (or with balancing disabled) never closes its cell spread, so it can + # stay in Cut-Off a long time, until the EOC timer (30min default) ends the charge, or forever if disabled. + bms_fake_equalizing_enabled: 'false' # true/false, false by default bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable # BMS 2 - path: 'packages/bms/bms_combine_SEPLOS_V3_RS485_bms_full.yaml' @@ -293,6 +298,11 @@ packages: bms_cell_ovp: '3.650' # V. Used by 'Auto CCL' functions bms_cell_uvp: '2.800' # V. Used by 'Auto DCL' functions and to calculate maximum discharge voltage bms_balance_trigger_voltage: '0.010' # V. Used by 'Auto CVL' functions + # Fake Equalizing: this BMS does not report its balancing state. When enabled, YamBMS infers it + # from the cell spread and holds the Cut-Off timer while the pack balances, instead of ending the charge. + # Warning: a BMS without a balancer (or with balancing disabled) never closes its cell spread, so it can + # stay in Cut-Off a long time, until the EOC timer (30min default) ends the charge, or forever if disabled. + bms_fake_equalizing_enabled: 'false' # true/false, false by default bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable # BMS 3 - path: 'packages/bms/bms_combine_SEPLOS_V3_RS485_bms_full.yaml' @@ -308,6 +318,11 @@ packages: bms_cell_ovp: '3.650' # V. Used by 'Auto CCL' functions bms_cell_uvp: '2.800' # V. Used by 'Auto DCL' functions and to calculate maximum discharge voltage bms_balance_trigger_voltage: '0.010' # V. Used by 'Auto CVL' functions + # Fake Equalizing: this BMS does not report its balancing state. When enabled, YamBMS infers it + # from the cell spread and holds the Cut-Off timer while the pack balances, instead of ending the charge. + # Warning: a BMS without a balancer (or with balancing disabled) never closes its cell spread, so it can + # stay in Cut-Off a long time, until the EOC timer (30min default) ends the charge, or forever if disabled. + bms_fake_equalizing_enabled: 'false' # true/false, false by default bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable diff --git a/YamBMS_RP_DEMO.yaml b/YamBMS_RP_DEMO.yaml index 6868734..a42f835 100644 --- a/YamBMS_RP_DEMO.yaml +++ b/YamBMS_RP_DEMO.yaml @@ -1,4 +1,4 @@ -# Updated : 2026.11.08 +# Updated : 2026.11.19 # Version : 1.8.2 # GitHub : https://github.com/Sleeper85/esphome-yambms @@ -278,6 +278,11 @@ packages: bms_cell_ovp: '3.650' # V Used by 'Auto CCL' functions bms_cell_uvp: '2.800' # V Used by 'Auto DCL' functions and to calculate maximum discharge voltage bms_balance_trigger_voltage: '0.010' # V Used by 'Auto CVL' functions + # Fake Equalizing: this BMS does not report its balancing state. When enabled, YamBMS infers it + # from the cell spread and holds the Cut-Off timer while the pack balances, instead of ending the charge. + # Warning: a BMS without a balancer (or with balancing disabled) never closes its cell spread, so it can + # stay in Cut-Off a long time, until the EOC timer (30min default) ends the charge, or forever if disabled. + bms_fake_equalizing_enabled: 'true' # true/false, false by default bms_charging_cycles: '178' # charging cycles number Used to calculate the SoH bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable @@ -300,6 +305,11 @@ packages: bms_cell_ovp: '3.650' # V Used by 'Auto CCL' functions bms_cell_uvp: '2.800' # V Used by 'Auto DCL' functions and to calculate maximum discharge voltage bms_balance_trigger_voltage: '0.010' # V Used by 'Auto CVL' functions + # Fake Equalizing: this BMS does not report its balancing state. When enabled, YamBMS infers it + # from the cell spread and holds the Cut-Off timer while the pack balances, instead of ending the charge. + # Warning: a BMS without a balancer (or with balancing disabled) never closes its cell spread, so it can + # stay in Cut-Off a long time, until the EOC timer (30min default) ends the charge, or forever if disabled. + bms_fake_equalizing_enabled: 'true' # true/false, false by default bms_charging_cycles: '226' # charging cycles number Used to calculate the SoH bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable @@ -322,6 +332,11 @@ packages: bms_cell_ovp: '3.650' # V Used by 'Auto CCL' functions bms_cell_uvp: '2.800' # V Used by 'Auto DCL' functions and to calculate maximum discharge voltage bms_balance_trigger_voltage: '0.010' # V Used by 'Auto CVL' functions + # Fake Equalizing: this BMS does not report its balancing state. When enabled, YamBMS infers it + # from the cell spread and holds the Cut-Off timer while the pack balances, instead of ending the charge. + # Warning: a BMS without a balancer (or with balancing disabled) never closes its cell spread, so it can + # stay in Cut-Off a long time, until the EOC timer (30min default) ends the charge, or forever if disabled. + bms_fake_equalizing_enabled: 'true' # true/false, false by default bms_charging_cycles: '194' # charging cycles number Used to calculate the SoH bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable diff --git a/examples/single-node/LP_BMS_example_DEMO_Shunt_and_BMS.yaml b/examples/single-node/LP_BMS_example_DEMO_Shunt_and_BMS.yaml index 1fa8049..291a9a0 100644 --- a/examples/single-node/LP_BMS_example_DEMO_Shunt_and_BMS.yaml +++ b/examples/single-node/LP_BMS_example_DEMO_Shunt_and_BMS.yaml @@ -57,6 +57,11 @@ packages: bms_cell_ovp: '3.650' # V Used by 'Auto CCL' functions bms_cell_uvp: '2.800' # V Used by 'Auto DCL' functions and to calculate maximum discharge voltage bms_balance_trigger_voltage: '0.010' # V Used by 'Auto CVL' functions + # Fake Equalizing: this BMS does not report its balancing state. When enabled, YamBMS infers it + # from the cell spread and holds the Cut-Off timer while the pack balances, instead of ending the charge. + # Warning: a BMS without a balancer (or with balancing disabled) never closes its cell spread, so it can + # stay in Cut-Off a long time, until the EOC timer (30min default) ends the charge, or forever if disabled. + bms_fake_equalizing_enabled: 'true' # true/false, false by default bms_charging_cycles: '178' # charging cycles number Used to calculate the SoH bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable @@ -79,6 +84,11 @@ packages: bms_cell_ovp: '3.650' # V Used by 'Auto CCL' functions bms_cell_uvp: '2.800' # V Used by 'Auto DCL' functions and to calculate maximum discharge voltage bms_balance_trigger_voltage: '0.010' # V Used by 'Auto CVL' functions + # Fake Equalizing: this BMS does not report its balancing state. When enabled, YamBMS infers it + # from the cell spread and holds the Cut-Off timer while the pack balances, instead of ending the charge. + # Warning: a BMS without a balancer (or with balancing disabled) never closes its cell spread, so it can + # stay in Cut-Off a long time, until the EOC timer (30min default) ends the charge, or forever if disabled. + bms_fake_equalizing_enabled: 'true' # true/false, false by default bms_charging_cycles: '226' # charging cycles number Used to calculate the SoH bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable @@ -101,5 +111,10 @@ packages: bms_cell_ovp: '3.650' # V Used by 'Auto CCL' functions bms_cell_uvp: '2.800' # V Used by 'Auto DCL' functions and to calculate maximum discharge voltage bms_balance_trigger_voltage: '0.010' # V Used by 'Auto CVL' functions + # Fake Equalizing: this BMS does not report its balancing state. When enabled, YamBMS infers it + # from the cell spread and holds the Cut-Off timer while the pack balances, instead of ending the charge. + # Warning: a BMS without a balancer (or with balancing disabled) never closes its cell spread, so it can + # stay in Cut-Off a long time, until the EOC timer (30min default) ends the charge, or forever if disabled. + bms_fake_equalizing_enabled: 'true' # true/false, false by default bms_charging_cycles: '194' # charging cycles number Used to calculate the SoH bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable diff --git a/examples/single-node/LP_BMS_example_EG4_LLV2_RS485_Modbus.yaml b/examples/single-node/LP_BMS_example_EG4_LLV2_RS485_Modbus.yaml index a67c596..f4145d1 100644 --- a/examples/single-node/LP_BMS_example_EG4_LLV2_RS485_Modbus.yaml +++ b/examples/single-node/LP_BMS_example_EG4_LLV2_RS485_Modbus.yaml @@ -40,6 +40,11 @@ packages: ## BMS address must start at 2 with EG4 LLV2, ID 1 is a special case and has different output. bms_address: 2 # BMS 1 modbus address bms_balance_trigger_voltage: '0.030' # V. Cell spread at which the BMS balances, set yours + # Fake Equalizing: this BMS does not report its balancing state. When enabled, YamBMS infers it + # from the cell spread and holds the Cut-Off timer while the pack balances, instead of ending the charge. + # Warning: a BMS without a balancer (or with balancing disabled) never closes its cell spread, so it can + # stay in Cut-Off a long time, until the EOC timer (30min default) ends the charge, or forever if disabled. + bms_fake_equalizing_enabled: 'false' # true/false, false by default bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable bms2: !include @@ -49,6 +54,11 @@ packages: bms_name: 'EG4-BMS 2' bms_address: 3 # BMS 2 modbus address bms_balance_trigger_voltage: '0.030' # V. Cell spread at which the BMS balances, set yours + # Fake Equalizing: this BMS does not report its balancing state. When enabled, YamBMS infers it + # from the cell spread and holds the Cut-Off timer while the pack balances, instead of ending the charge. + # Warning: a BMS without a balancer (or with balancing disabled) never closes its cell spread, so it can + # stay in Cut-Off a long time, until the EOC timer (30min default) ends the charge, or forever if disabled. + bms_fake_equalizing_enabled: 'false' # true/false, false by default bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable bms3: !include @@ -58,4 +68,9 @@ packages: bms_name: 'EG4-BMS 3' bms_address: 4 # BMS 3 modbus address bms_balance_trigger_voltage: '0.030' # V. Cell spread at which the BMS balances, set yours + # Fake Equalizing: this BMS does not report its balancing state. When enabled, YamBMS infers it + # from the cell spread and holds the Cut-Off timer while the pack balances, instead of ending the charge. + # Warning: a BMS without a balancer (or with balancing disabled) never closes its cell spread, so it can + # stay in Cut-Off a long time, until the EOC timer (30min default) ends the charge, or forever if disabled. + bms_fake_equalizing_enabled: 'false' # true/false, false by default bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable diff --git a/examples/single-node/LP_BMS_example_SEPLOS_V1_V2_RS485.yaml b/examples/single-node/LP_BMS_example_SEPLOS_V1_V2_RS485.yaml index d68c5a7..b10d9a8 100644 --- a/examples/single-node/LP_BMS_example_SEPLOS_V1_V2_RS485.yaml +++ b/examples/single-node/LP_BMS_example_SEPLOS_V1_V2_RS485.yaml @@ -47,6 +47,11 @@ packages: bms_cell_ovp: '3.650' # V. Used by 'Auto CCL' functions bms_cell_uvp: '2.800' # V. Used by 'Auto DCL' functions and to calculate maximum discharge voltage bms_balance_trigger_voltage: '0.010' # V. Used by 'Auto CVL' functions + # Fake Equalizing: this BMS does not report its balancing state. When enabled, YamBMS infers it + # from the cell spread and holds the Cut-Off timer while the pack balances, instead of ending the charge. + # Warning: a BMS without a balancer (or with balancing disabled) never closes its cell spread, so it can + # stay in Cut-Off a long time, until the EOC timer (30min default) ends the charge, or forever if disabled. + bms_fake_equalizing_enabled: 'false' # true/false, false by default bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable bms2: !include @@ -64,6 +69,11 @@ packages: bms_cell_ovp: '3.650' # V. Used by 'Auto CCL' functions bms_cell_uvp: '2.800' # V. Used by 'Auto DCL' functions and to calculate maximum discharge voltage bms_balance_trigger_voltage: '0.010' # V. Used by 'Auto CVL' functions + # Fake Equalizing: this BMS does not report its balancing state. When enabled, YamBMS infers it + # from the cell spread and holds the Cut-Off timer while the pack balances, instead of ending the charge. + # Warning: a BMS without a balancer (or with balancing disabled) never closes its cell spread, so it can + # stay in Cut-Off a long time, until the EOC timer (30min default) ends the charge, or forever if disabled. + bms_fake_equalizing_enabled: 'false' # true/false, false by default bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable bms3: !include @@ -81,4 +91,9 @@ packages: bms_cell_ovp: '3.650' # V. Used by 'Auto CCL' functions bms_cell_uvp: '2.800' # V. Used by 'Auto DCL' functions and to calculate maximum discharge voltage bms_balance_trigger_voltage: '0.010' # V. Used by 'Auto CVL' functions + # Fake Equalizing: this BMS does not report its balancing state. When enabled, YamBMS infers it + # from the cell spread and holds the Cut-Off timer while the pack balances, instead of ending the charge. + # Warning: a BMS without a balancer (or with balancing disabled) never closes its cell spread, so it can + # stay in Cut-Off a long time, until the EOC timer (30min default) ends the charge, or forever if disabled. + bms_fake_equalizing_enabled: 'false' # true/false, false by default bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable diff --git a/examples/single-node/LP_BMS_example_SEPLOS_V3_RS485_sniffer.yaml b/examples/single-node/LP_BMS_example_SEPLOS_V3_RS485_sniffer.yaml index bacd8cd..ec83aff 100644 --- a/examples/single-node/LP_BMS_example_SEPLOS_V3_RS485_sniffer.yaml +++ b/examples/single-node/LP_BMS_example_SEPLOS_V3_RS485_sniffer.yaml @@ -48,6 +48,11 @@ packages: bms_cell_ovp: '3.650' # V. Used by 'Auto CCL' functions bms_cell_uvp: '2.800' # V. Used by 'Auto DCL' functions and to calculate maximum discharge voltage bms_balance_trigger_voltage: '0.010' # V. Used by 'Auto CVL' functions + # Fake Equalizing: this BMS does not report its balancing state. When enabled, YamBMS infers it + # from the cell spread and holds the Cut-Off timer while the pack balances, instead of ending the charge. + # Warning: a BMS without a balancer (or with balancing disabled) never closes its cell spread, so it can + # stay in Cut-Off a long time, until the EOC timer (30min default) ends the charge, or forever if disabled. + bms_fake_equalizing_enabled: 'false' # true/false, false by default bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable bms2: !include @@ -64,6 +69,11 @@ packages: bms_cell_ovp: '3.650' # V. Used by 'Auto CCL' functions bms_cell_uvp: '2.800' # V. Used by 'Auto DCL' functions and to calculate maximum discharge voltage bms_balance_trigger_voltage: '0.010' # V. Used by 'Auto CVL' functions + # Fake Equalizing: this BMS does not report its balancing state. When enabled, YamBMS infers it + # from the cell spread and holds the Cut-Off timer while the pack balances, instead of ending the charge. + # Warning: a BMS without a balancer (or with balancing disabled) never closes its cell spread, so it can + # stay in Cut-Off a long time, until the EOC timer (30min default) ends the charge, or forever if disabled. + bms_fake_equalizing_enabled: 'false' # true/false, false by default bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable bms3: !include @@ -80,4 +90,9 @@ packages: bms_cell_ovp: '3.650' # V. Used by 'Auto CCL' functions bms_cell_uvp: '2.800' # V. Used by 'Auto DCL' functions and to calculate maximum discharge voltage bms_balance_trigger_voltage: '0.010' # V. Used by 'Auto CVL' functions + # Fake Equalizing: this BMS does not report its balancing state. When enabled, YamBMS infers it + # from the cell spread and holds the Cut-Off timer while the pack balances, instead of ending the charge. + # Warning: a BMS without a balancer (or with balancing disabled) never closes its cell spread, so it can + # stay in Cut-Off a long time, until the EOC timer (30min default) ends the charge, or forever if disabled. + bms_fake_equalizing_enabled: 'false' # true/false, false by default bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable diff --git a/examples/single-node/RP_BMS_example_DEMO_Shunt_and_BMS.yaml b/examples/single-node/RP_BMS_example_DEMO_Shunt_and_BMS.yaml index a9de052..224ea04 100644 --- a/examples/single-node/RP_BMS_example_DEMO_Shunt_and_BMS.yaml +++ b/examples/single-node/RP_BMS_example_DEMO_Shunt_and_BMS.yaml @@ -61,6 +61,11 @@ bms_cell_ovp: '3.650' # V Used by 'Auto CCL' functions bms_cell_uvp: '2.800' # V Used by 'Auto DCL' functions and to calculate maximum discharge voltage bms_balance_trigger_voltage: '0.010' # V Used by 'Auto CVL' functions + # Fake Equalizing: this BMS does not report its balancing state. When enabled, YamBMS infers it + # from the cell spread and holds the Cut-Off timer while the pack balances, instead of ending the charge. + # Warning: a BMS without a balancer (or with balancing disabled) never closes its cell spread, so it can + # stay in Cut-Off a long time, until the EOC timer (30min default) ends the charge, or forever if disabled. + bms_fake_equalizing_enabled: 'true' # true/false, false by default bms_charging_cycles: '178' # charging cycles number Used to calculate the SoH bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable @@ -83,6 +88,11 @@ bms_cell_ovp: '3.650' # V Used by 'Auto CCL' functions bms_cell_uvp: '2.800' # V Used by 'Auto DCL' functions and to calculate maximum discharge voltage bms_balance_trigger_voltage: '0.010' # V Used by 'Auto CVL' functions + # Fake Equalizing: this BMS does not report its balancing state. When enabled, YamBMS infers it + # from the cell spread and holds the Cut-Off timer while the pack balances, instead of ending the charge. + # Warning: a BMS without a balancer (or with balancing disabled) never closes its cell spread, so it can + # stay in Cut-Off a long time, until the EOC timer (30min default) ends the charge, or forever if disabled. + bms_fake_equalizing_enabled: 'true' # true/false, false by default bms_charging_cycles: '226' # charging cycles number Used to calculate the SoH bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable @@ -105,5 +115,10 @@ bms_cell_ovp: '3.650' # V Used by 'Auto CCL' functions bms_cell_uvp: '2.800' # V Used by 'Auto DCL' functions and to calculate maximum discharge voltage bms_balance_trigger_voltage: '0.010' # V Used by 'Auto CVL' functions + # Fake Equalizing: this BMS does not report its balancing state. When enabled, YamBMS infers it + # from the cell spread and holds the Cut-Off timer while the pack balances, instead of ending the charge. + # Warning: a BMS without a balancer (or with balancing disabled) never closes its cell spread, so it can + # stay in Cut-Off a long time, until the EOC timer (30min default) ends the charge, or forever if disabled. + bms_fake_equalizing_enabled: 'true' # true/false, false by default bms_charging_cycles: '194' # charging cycles number Used to calculate the SoH bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable diff --git a/examples/single-node/RP_BMS_example_EG4_LLV2_RS485_Modbus.yaml b/examples/single-node/RP_BMS_example_EG4_LLV2_RS485_Modbus.yaml index cb3fcbb..b8d0033 100644 --- a/examples/single-node/RP_BMS_example_EG4_LLV2_RS485_Modbus.yaml +++ b/examples/single-node/RP_BMS_example_EG4_LLV2_RS485_Modbus.yaml @@ -44,6 +44,11 @@ ## BMS address must start at 2 with EG4 LLV2, ID 1 is a special case and has different output. bms_address: 2 # BMS 1 modbus address bms_balance_trigger_voltage: '0.030' # V. Cell spread at which the BMS balances, set yours + # Fake Equalizing: this BMS does not report its balancing state. When enabled, YamBMS infers it + # from the cell spread and holds the Cut-Off timer while the pack balances, instead of ending the charge. + # Warning: a BMS without a balancer (or with balancing disabled) never closes its cell spread, so it can + # stay in Cut-Off a long time, until the EOC timer (30min default) ends the charge, or forever if disabled. + bms_fake_equalizing_enabled: 'false' # true/false, false by default bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable # BMS 2 - path: 'packages/bms/bms_combine_EG4_LLV2_RS485_bms_full.yaml' @@ -52,6 +57,11 @@ bms_name: 'EG4-BMS 2' bms_address: 3 # BMS 2 modbus address bms_balance_trigger_voltage: '0.030' # V. Cell spread at which the BMS balances, set yours + # Fake Equalizing: this BMS does not report its balancing state. When enabled, YamBMS infers it + # from the cell spread and holds the Cut-Off timer while the pack balances, instead of ending the charge. + # Warning: a BMS without a balancer (or with balancing disabled) never closes its cell spread, so it can + # stay in Cut-Off a long time, until the EOC timer (30min default) ends the charge, or forever if disabled. + bms_fake_equalizing_enabled: 'false' # true/false, false by default bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable # BMS 3 - path: 'packages/bms/bms_combine_EG4_LLV2_RS485_bms_full.yaml' @@ -60,4 +70,9 @@ bms_name: 'EG4-BMS 3' bms_address: 4 # BMS 3 modbus address bms_balance_trigger_voltage: '0.030' # V. Cell spread at which the BMS balances, set yours + # Fake Equalizing: this BMS does not report its balancing state. When enabled, YamBMS infers it + # from the cell spread and holds the Cut-Off timer while the pack balances, instead of ending the charge. + # Warning: a BMS without a balancer (or with balancing disabled) never closes its cell spread, so it can + # stay in Cut-Off a long time, until the EOC timer (30min default) ends the charge, or forever if disabled. + bms_fake_equalizing_enabled: 'false' # true/false, false by default bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable diff --git a/examples/single-node/RP_BMS_example_SEPLOS_V1_V2_RS485.yaml b/examples/single-node/RP_BMS_example_SEPLOS_V1_V2_RS485.yaml index 7641b32..9bf0a6e 100644 --- a/examples/single-node/RP_BMS_example_SEPLOS_V1_V2_RS485.yaml +++ b/examples/single-node/RP_BMS_example_SEPLOS_V1_V2_RS485.yaml @@ -51,6 +51,11 @@ bms_cell_ovp: '3.650' # V. Used by 'Auto CCL' functions bms_cell_uvp: '2.800' # V. Used by 'Auto DCL' functions and to calculate maximum discharge voltage bms_balance_trigger_voltage: '0.010' # V. Used by 'Auto CVL' functions + # Fake Equalizing: this BMS does not report its balancing state. When enabled, YamBMS infers it + # from the cell spread and holds the Cut-Off timer while the pack balances, instead of ending the charge. + # Warning: a BMS without a balancer (or with balancing disabled) never closes its cell spread, so it can + # stay in Cut-Off a long time, until the EOC timer (30min default) ends the charge, or forever if disabled. + bms_fake_equalizing_enabled: 'false' # true/false, false by default bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable # BMS 2 - path: 'packages/bms/bms_combine_SEPLOS_V1_V2_RS485_bms_full.yaml' @@ -67,6 +72,11 @@ bms_cell_ovp: '3.650' # V. Used by 'Auto CCL' functions bms_cell_uvp: '2.800' # V. Used by 'Auto DCL' functions and to calculate maximum discharge voltage bms_balance_trigger_voltage: '0.010' # V. Used by 'Auto CVL' functions + # Fake Equalizing: this BMS does not report its balancing state. When enabled, YamBMS infers it + # from the cell spread and holds the Cut-Off timer while the pack balances, instead of ending the charge. + # Warning: a BMS without a balancer (or with balancing disabled) never closes its cell spread, so it can + # stay in Cut-Off a long time, until the EOC timer (30min default) ends the charge, or forever if disabled. + bms_fake_equalizing_enabled: 'false' # true/false, false by default bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable # BMS 3 - path: 'packages/bms/bms_combine_SEPLOS_V1_V2_RS485_bms_full.yaml' @@ -83,4 +93,9 @@ bms_cell_ovp: '3.650' # V. Used by 'Auto CCL' functions bms_cell_uvp: '2.800' # V. Used by 'Auto DCL' functions and to calculate maximum discharge voltage bms_balance_trigger_voltage: '0.010' # V. Used by 'Auto CVL' functions + # Fake Equalizing: this BMS does not report its balancing state. When enabled, YamBMS infers it + # from the cell spread and holds the Cut-Off timer while the pack balances, instead of ending the charge. + # Warning: a BMS without a balancer (or with balancing disabled) never closes its cell spread, so it can + # stay in Cut-Off a long time, until the EOC timer (30min default) ends the charge, or forever if disabled. + bms_fake_equalizing_enabled: 'false' # true/false, false by default bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable diff --git a/examples/single-node/RP_BMS_example_SEPLOS_V3_RS485_sniffer.yaml b/examples/single-node/RP_BMS_example_SEPLOS_V3_RS485_sniffer.yaml index e943472..ccdb0f0 100644 --- a/examples/single-node/RP_BMS_example_SEPLOS_V3_RS485_sniffer.yaml +++ b/examples/single-node/RP_BMS_example_SEPLOS_V3_RS485_sniffer.yaml @@ -52,6 +52,11 @@ bms_cell_ovp: '3.650' # V. Used by 'Auto CCL' functions bms_cell_uvp: '2.800' # V. Used by 'Auto DCL' functions and to calculate maximum discharge voltage bms_balance_trigger_voltage: '0.010' # V. Used by 'Auto CVL' functions + # Fake Equalizing: this BMS does not report its balancing state. When enabled, YamBMS infers it + # from the cell spread and holds the Cut-Off timer while the pack balances, instead of ending the charge. + # Warning: a BMS without a balancer (or with balancing disabled) never closes its cell spread, so it can + # stay in Cut-Off a long time, until the EOC timer (30min default) ends the charge, or forever if disabled. + bms_fake_equalizing_enabled: 'false' # true/false, false by default bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable # BMS 2 - path: 'packages/bms/bms_combine_SEPLOS_V3_RS485_bms_full.yaml' @@ -67,6 +72,11 @@ bms_cell_ovp: '3.650' # V. Used by 'Auto CCL' functions bms_cell_uvp: '2.800' # V. Used by 'Auto DCL' functions and to calculate maximum discharge voltage bms_balance_trigger_voltage: '0.010' # V. Used by 'Auto CVL' functions + # Fake Equalizing: this BMS does not report its balancing state. When enabled, YamBMS infers it + # from the cell spread and holds the Cut-Off timer while the pack balances, instead of ending the charge. + # Warning: a BMS without a balancer (or with balancing disabled) never closes its cell spread, so it can + # stay in Cut-Off a long time, until the EOC timer (30min default) ends the charge, or forever if disabled. + bms_fake_equalizing_enabled: 'false' # true/false, false by default bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable # BMS 3 - path: 'packages/bms/bms_combine_SEPLOS_V3_RS485_bms_full.yaml' @@ -82,4 +92,9 @@ bms_cell_ovp: '3.650' # V. Used by 'Auto CCL' functions bms_cell_uvp: '2.800' # V. Used by 'Auto DCL' functions and to calculate maximum discharge voltage bms_balance_trigger_voltage: '0.010' # V. Used by 'Auto CVL' functions + # Fake Equalizing: this BMS does not report its balancing state. When enabled, YamBMS infers it + # from the cell spread and holds the Cut-Off timer while the pack balances, instead of ending the charge. + # Warning: a BMS without a balancer (or with balancing disabled) never closes its cell spread, so it can + # stay in Cut-Off a long time, until the EOC timer (30min default) ends the charge, or forever if disabled. + bms_fake_equalizing_enabled: 'false' # true/false, false by default bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable