diff --git a/packages/board/board_ESP32-C3_FlipC3.yaml b/packages/board/board_ESP32-C3_FlipC3.yaml new file mode 100644 index 0000000..bd03421 --- /dev/null +++ b/packages/board/board_ESP32-C3_FlipC3.yaml @@ -0,0 +1,81 @@ +# Updated : 2025.11.22 +# Version : 1.1.1 +# GitHub : https://github.com/Sleeper85/esphome-yambms + +# YamBMS ( Yet another multi-BMS Merging Solution ) + +# This YAML is free software: you can redistribute it and/or +# modify it under the terms of the GNU General Public License +# as published by the Free Software Foundation, either version 3 +# of the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. +# See the GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see . + +# https://wiki.vdbx.io/product/flip_c3 + +substitutions: + board_chip: "ESP32-C3" + board_name: "FlipC3" + # Interfaces GPIOs + # uart_esp_1 # UART PORT + tx_pin_1: '21' + rx_pin_1: '20' + # uart_esp_2 # I2C PORT (Using Grove to STEMMA QT / Qwiic / JST SH Cable with 3.3 pulled out and tied to 5V) + tx_pin_2: '1' + rx_pin_2: '0' + # uart_esp_3 + tx_pin_3: '2' + rx_pin_3: '3' + # canbus_esp32_can + tx_pin_4: '7' + rx_pin_4: '6' + # canbus_mcp2515 + spi_mosi_pin: '2' + spi_miso_pin: '3' + spi_clk_pin: '4' + mcp2515_cs_pin: '5' + +packages: + device_base: !include ../base/device_base.yaml + device_base_wifi: !include ../base/device_base_wifi.yaml + board_rgb_led: !include board_options_rgb_led_status.yaml + +esp32: + board: esp32-c3-devkitm-1 + flash_size: 4MB # ajust according to your ESP32-C3 version + framework: + type: esp-idf + +esphome: + platformio_options: + board_build.flash_mode: dio # use Dual IO (dio) instead of Quad IO (qio) to prevent boot loop after flashing + +wifi: + id: my_network + ssid: !secret wifi_ssid + password: !secret wifi_password + domain: !secret domain + +logger: + baud_rate: 0 # frees the 3rd UART and avoids some bugs like "WK2168 with canbus" or "BLE client with RS485 modbus" + hardware_uart: USB_SERIAL_JTAG + +light: + # https://esphome.io/components/light/esp32_rmt_led_strip + # ESP Light used to see the inverter heartbeat + # Internal : only specifying an id without a name will implicitly set this to true. + - platform: esp32_rmt_led_strip + id: esp_light + rgb_order: GRB + pin: 8 + num_leds: 1 + # rmt_channel: 0 + chipset: ws2812 + entity_category: config + default_transition_length: 0ms