diff --git a/yambms_remote_packages_example.yaml b/yambms_remote_packages_example.yaml index afe0d33..b21e8c8 100644 --- a/yambms_remote_packages_example.yaml +++ b/yambms_remote_packages_example.yaml @@ -1,4 +1,4 @@ -# Updated : 2025.03.21 +# Updated : 2025.03.24 # Version : 1.5.4 # GitHub : https://github.com/Sleeper85/esphome-yambms @@ -26,22 +26,62 @@ ota: api: reboot_timeout: 0s +# Don't forget to configure your WiFi credentials in the secrets.yaml file +# +# If needed, configure a static IP here +# wifi: +# manual_ip: +# static_ip: 192.168.0.85 +# gateway: 192.168.0.1 +# subnet: 255.255.255.0 +# dns1: 8.8.8.8 +# dns2: 8.8.4.4 + # +--------------------------------------+ # | Global Settings | # +--------------------------------------+ substitutions: name: yambms # ESP32 name / hostname - # YamBMS settings + # +--------------------------------------+ + # | YamBMS Settings | + # +--------------------------------------+ + # Please read the cut-off charging logic README to understand how the YamBMS works yambms_id: 'yambms1' yambms_name: 'YamBMS 1' - # Shunt settings + yambms_update_interval: '1s' + # Input numbers can be displayed as a slider or an input box, options are 'slider' or 'box'. + yambms_input_number_mode: 'slider' + # Please check and fill in the options below correctly according to your battery chemistry and number of cells in series. + # These parameters are important and used for charging logic. + # Battery Chemistry + yambms_battery_chemistry: '1' # 1-LFP | 2-Li-ion | 3-LTO + # Number of cells in series + yambms_cell_count: '16' + # Bulk / Absorption Voltage : corresponds to the Bulk voltage that will be used to charge the battery. (LFP : 55.2V = 3.45V/Cell for 16S battery) + yambms_bulk_v: '55.2' + # Float Voltage : corresponds to the voltage at which the battery would be maintained at the end of charge. (LFP : 53.6V = 3.35V/Cell for 16S battery) + yambms_float_v: '53.6' + # Rebulk voltage, voltage from which a new Bulk charge can start. (LFP : 52.8V = 3.3V/Cell for 16S battery) + yambms_rebulk_v: '52.8' + # Maximum time in minutes that the cut-off step can last before charging is complete + # If your cells are properly balanced this step ends at the fastest after the `cut-off timer` + # This timer can be deactivated with a switch + yambms_eoc_timer: '30' + # Time in seconds during which the end of charge conditions must be respected (cut-off + cells not equalizing) + yambms_cutoff_timer: '60' + # Maximum charging cycles is used to calculate the battey SOH, LF280K v3 =8000.0, LF280K v2 =6000.0, LF280=3000.0 (decimal is required) + yambms_max_cycles: '6000.0' + # +--------------------------------------+ + # | Shunt Settings | + # +--------------------------------------+ shunt_update_interval: '3s' # frequency at which Shunt data is refreshed shunt_combine_interval: '1s' # frequency at which Shunt data is combined in YamBMS - # BMS settings - bms_battery_chemistry: '1' # 1-LFP | 2-Li-ion | 3-LTO + # +--------------------------------------+ + # | BMS Settings | + # +--------------------------------------+ bms_update_interval: '3s' # frequency at which BMS data is refreshed, going below '3s' can cause problems bms_combine_interval: '1s' # frequency at which BMS data is combined in YamBMS - bms_cutoff_timer: '60s' # time during which the end of charge conditions must be respected (cut-off + cells not equalizing) + bms_cutoff_timer: '50s' # time during which the end of charge conditions must be respected (cut-off + cells not equalizing) # +--------------------------------------+ # | Packages | @@ -94,31 +134,9 @@ packages: refresh: 0s files: - path: 'packages/yambms/yambms.yaml' - vars: - # Please read the cut-off charging logic README to understand how the YamBMS works - yambms_update_interval: '1s' - # Input numbers can be displayed as a slider or an input box, options are 'slider' or 'box'. - yambms_input_number_mode: 'slider' - # Please check and fill in the options below correctly according to your battery chemistry and number of cells in series. - # These parameters are important and used for charging logic. - # Battery Chemistry - yambms_battery_chemistry: '1' # 1-LFP | 2-Li-ion | 3-LTO - # Number of cells in series - yambms_cell_count: '16' - # Bulk / Absorption Voltage : corresponds to the Bulk voltage that will be used to charge the battery. (LFP : 55.2V = 3.45V/Cell for 16S battery) - yambms_bulk_v: '55.2' - # Float Voltage : corresponds to the voltage at which the battery would be maintained at the end of charge. (LFP : 53.6V = 3.35V/Cell for 16S battery) - yambms_float_v: '53.6' - # Rebulk voltage, voltage from which a new Bulk charge can start. (LFP : 52.8V = 3.3V/Cell for 16S battery) - yambms_rebulk_v: '52.8' - # Maximum time in minutes that the cut-off step can last before charging is complete - # If your cells are properly balanced this step ends at the fastest after the `cut-off timer` - # This timer can be deactivated with a switch - yambms_eoc_timer: '30' - # Time in seconds during which the end of charge conditions must be respected (cut-off + cells not equalizing) - yambms_cutoff_timer: '60' - # Maximum charging cycles is used to calculate the battey SOH, LF280K v3 =8000.0, LF280K v2 =6000.0, LF280=3000.0 (decimal is required) - yambms_max_cycles: '6000.0' + # - path: 'packages/yambms/yambms_custom.yaml' + + # yambms_custom: !include packages/yambms/yambms_custom.yaml canbus1: url: https://github.com/Sleeper85/esphome-yambms @@ -131,9 +149,9 @@ packages: canbus_name: 'CANBUS 1' canbus_node_id: 'canbus_node1' canbus_light_id: 'esp_light' - # The CANBUS link will be considered down if no response from the inverter (ID 0x305) for 5s - # The Deye inverter sends the ACK (can_id 0x305) only when it receives the can_id 0x356 - canbus_link_timer: '6s' + # The CANBUS link will be considered down if no response from the inverter (0x305 frame) for 5s + # The Deye inverter sends the ACK 0x305 only when it receives the 0x356 frame. + canbus_link_timer: '5s' # +--------------------------------------+ # | DEBUG ( logger level must be DEBUG ) |