diff --git a/README.md b/README.md
index 7cdbb77..56be243 100644
--- a/README.md
+++ b/README.md
@@ -9,9 +9,15 @@
> [!TIP]
> Not sure which YAML to choose ? ... `YamBMS_Remote_Packages_example.yaml` is a good basis for creating your custom YAML.
-> Examples of BMS imports can be found in the [configuration_examples](configuration_examples/) folder.
+> Examples of BMS and Shunt imports can be found in the [configuration_examples](configuration_examples/) folder.
> You can mix different BMS models, the only condition is that they are numbered in order starting from `1`.
+> [!IMPORTANT]
+> The most important thing for proper functioning of YamBMS is that **the voltage of your BMS is well calibrated**.
+> YamBMS logic is based on the `min_cell_voltage` and `max_cell_voltage` voltages of your BMS.
+> If you use YamBMS, the internal charging logic of the `JK-PB BMS` will not be used.
+> Please read the [documentation](README.md#contents) and the [setup instructions](documents/README/Schematic_and_setup_instructions.md).
+
| ESPHome application to monitor BMS and communicate with inverters
supporting CAN bus protocol compatible with Pylontech, GoodWe, SMA,
Victron or Luxpower (EG4). |
|
| :--- | --- |
| **Note: Pylontech uses 15S/48V and many others uses 16S/51.2V !**
Other battery profiles that utilise the **`PYLON`** protocol with different cell counts
may also work, e.g. Alpha Ess Smile, BYD Battery-Box LV Flex Lite.
Select the correct battery profile in the inverter to match your battery pack !
The **`ESP32`** communicates with the BMS using the **`BLE / UART / RS485`**
protocol and then sends the CAN bus frames to the inverter via the
[CAN bus transceiver](documents/README/Supported_devices.md#supported-can-bus-transceiver). |
|
diff --git a/documents/README/BMS_JK-B.md b/documents/README/BMS_JK-B.md
index 7eafccf..2a8f766 100644
--- a/documents/README/BMS_JK-B.md
+++ b/documents/README/BMS_JK-B.md
@@ -6,6 +6,10 @@


+> [!IMPORTANT]
+> The most important thing for proper functioning of YamBMS is that **the voltage of your BMS is well calibrated**.
+> YamBMS logic is based on the `min_cell_voltage` and `max_cell_voltage` voltages of your BMS.
+
## JK-B BMS overview
### UART1 (GPS) port
diff --git a/documents/README/BMS_JK-PB.md b/documents/README/BMS_JK-PB.md
index e03e42e..3297e97 100644
--- a/documents/README/BMS_JK-PB.md
+++ b/documents/README/BMS_JK-PB.md
@@ -6,6 +6,11 @@


+> [!IMPORTANT]
+> The most important thing for proper functioning of YamBMS is that **the voltage of your BMS is well calibrated**.
+> YamBMS logic is based on the `min_cell_voltage` and `max_cell_voltage` voltages of your BMS.
+> If you use YamBMS, the internal charging logic of the `JK-PB BMS` will not be used.
+
## JK-PB BMS overview
||
diff --git a/documents/README/BMS_JK_RS485_DISPLAY.md b/documents/README/BMS_JK_RS485_DISPLAY.md
index aadf97b..19e744b 100644
--- a/documents/README/BMS_JK_RS485_DISPLAY.md
+++ b/documents/README/BMS_JK_RS485_DISPLAY.md
@@ -6,6 +6,10 @@


+> [!IMPORTANT]
+> The most important thing for proper functioning of YamBMS is that **the voltage of your BMS is well calibrated**.
+> YamBMS logic is based on the `min_cell_voltage` and `max_cell_voltage` voltages of your BMS.
+
## External component
[esphome-jk-bms](https://github.com/syssi/esphome-jk-bms) by [@syssi](https://github.com/syssi)