From b3445c5e3c16f86f869c68555ad70ed32d2b13e8 Mon Sep 17 00:00:00 2001 From: Sleeper85 Date: Fri, 16 May 2025 10:16:46 +0200 Subject: [PATCH] Important notes regarding BMS configuration. --- README.md | 8 +++++++- documents/README/BMS_JK-B.md | 4 ++++ documents/README/BMS_JK-PB.md | 5 +++++ documents/README/BMS_JK_RS485_DISPLAY.md | 4 ++++ 4 files changed, 20 insertions(+), 1 deletion(-) diff --git a/README.md b/README.md index 7cdbb77..56be243 100644 --- a/README.md +++ b/README.md @@ -9,9 +9,15 @@ > [!TIP] > Not sure which YAML to choose ? ... `YamBMS_Remote_Packages_example.yaml` is a good basis for creating your custom YAML. -> Examples of BMS imports can be found in the [configuration_examples](configuration_examples/) folder. +> Examples of BMS and Shunt imports can be found in the [configuration_examples](configuration_examples/) folder. > You can mix different BMS models, the only condition is that they are numbered in order starting from `1`. +> [!IMPORTANT] +> The most important thing for proper functioning of YamBMS is that **the voltage of your BMS is well calibrated**. +> YamBMS logic is based on the `min_cell_voltage` and `max_cell_voltage` voltages of your BMS. +> If you use YamBMS, the internal charging logic of the `JK-PB BMS` will not be used. +> Please read the [documentation](README.md#contents) and the [setup instructions](documents/README/Schematic_and_setup_instructions.md). + | ESPHome application to monitor BMS and communicate with inverters
supporting CAN bus protocol compatible with Pylontech, GoodWe, SMA,
Victron or Luxpower (EG4). | Buy Me A Coffee | | :--- | --- | | **Note: Pylontech uses 15S/48V and many others uses 16S/51.2V !**

Other battery profiles that utilise the **`PYLON`** protocol with different cell counts
may also work, e.g. Alpha Ess Smile, BYD Battery-Box LV Flex Lite.
Select the correct battery profile in the inverter to match your battery pack !
The **`ESP32`** communicates with the BMS using the **`BLE / UART / RS485`**
protocol and then sends the CAN bus frames to the inverter via the
[CAN bus transceiver](documents/README/Supported_devices.md#supported-can-bus-transceiver). | Buy Me A Coffee | diff --git a/documents/README/BMS_JK-B.md b/documents/README/BMS_JK-B.md index 7eafccf..2a8f766 100644 --- a/documents/README/BMS_JK-B.md +++ b/documents/README/BMS_JK-B.md @@ -6,6 +6,10 @@ ![GitHub forks](https://img.shields.io/github/forks/Sleeper85/esphome-yambms) ![GitHub watchers](https://img.shields.io/github/watchers/Sleeper85/esphome-yambms) +> [!IMPORTANT] +> The most important thing for proper functioning of YamBMS is that **the voltage of your BMS is well calibrated**. +> YamBMS logic is based on the `min_cell_voltage` and `max_cell_voltage` voltages of your BMS. + ## JK-B BMS overview ### UART1 (GPS) port diff --git a/documents/README/BMS_JK-PB.md b/documents/README/BMS_JK-PB.md index e03e42e..3297e97 100644 --- a/documents/README/BMS_JK-PB.md +++ b/documents/README/BMS_JK-PB.md @@ -6,6 +6,11 @@ ![GitHub forks](https://img.shields.io/github/forks/Sleeper85/esphome-yambms) ![GitHub watchers](https://img.shields.io/github/watchers/Sleeper85/esphome-yambms) +> [!IMPORTANT] +> The most important thing for proper functioning of YamBMS is that **the voltage of your BMS is well calibrated**. +> YamBMS logic is based on the `min_cell_voltage` and `max_cell_voltage` voltages of your BMS. +> If you use YamBMS, the internal charging logic of the `JK-PB BMS` will not be used. + ## JK-PB BMS overview |![Image](../../images/BMS_JK-PB_Inverter_BMS.png)| diff --git a/documents/README/BMS_JK_RS485_DISPLAY.md b/documents/README/BMS_JK_RS485_DISPLAY.md index aadf97b..19e744b 100644 --- a/documents/README/BMS_JK_RS485_DISPLAY.md +++ b/documents/README/BMS_JK_RS485_DISPLAY.md @@ -6,6 +6,10 @@ ![GitHub forks](https://img.shields.io/github/forks/Sleeper85/esphome-yambms) ![GitHub watchers](https://img.shields.io/github/watchers/Sleeper85/esphome-yambms) +> [!IMPORTANT] +> The most important thing for proper functioning of YamBMS is that **the voltage of your BMS is well calibrated**. +> YamBMS logic is based on the `min_cell_voltage` and `max_cell_voltage` voltages of your BMS. + ## External component [esphome-jk-bms](https://github.com/syssi/esphome-jk-bms) by [@syssi](https://github.com/syssi)