diff --git a/README.md b/README.md index 758e460..af3f0aa 100644 --- a/README.md +++ b/README.md @@ -173,7 +173,7 @@ rx_pin: 22 # to CAN board CRX (with 4.7K resistor except for SN65HVD230) ## Requirements -* [ESPHome 2026.6.0 or higher](https://github.com/esphome/esphome/releases) +* [ESPHome 2026.7.0 or higher](https://github.com/esphome/esphome/releases) * ESP32 MCU (buying a board with ≥8MB flash is advised if you intend to monitor multiple BMS) * CAN transceiver (only with TJA1050/TJA1051 => 4.7K resistor for 5V to 3V3 level shifing) * BMS JK, JBD, Seplos (other BMS brands already integrated with ESPhome can be added easily) @@ -184,7 +184,7 @@ rx_pin: 22 # to CAN board CRX (with 4.7K resistor except for SN65HVD230) ## Data collection > [!NOTE] -> For your information, in January 2026 there were `160` YamBMS users. +> For your information, in July 2026 there were `250` YamBMS users. If the ESP32 has an internet connection, the following data is sent to [this script](http://script.opentel.be/yambms.post.php) for statistics collection. Only [@Sleeper85](https://github.com/Sleeper85) have access to this information for the production of statistics, the support and the update service. diff --git a/packages/base/device_base_esphome.yaml b/packages/base/device_base_esphome.yaml index 4815938..82c3b91 100644 --- a/packages/base/device_base_esphome.yaml +++ b/packages/base/device_base_esphome.yaml @@ -1,4 +1,4 @@ -# Updated : 2026.07.08 +# Updated : 2026.07.31 # Version : 1.7.1 # GitHub : https://github.com/Sleeper85/esphome-yambms @@ -28,4 +28,4 @@ esphome: project: name: Sleeper85.YamBMS version: ${yambms_version} - min_version: 2026.6.0 + min_version: 2026.7.0