From d178ffa5c8472b2c16bed54650a2aa2fd9a26175 Mon Sep 17 00:00:00 2001 From: Sleeper85 Date: Mon, 16 Feb 2026 15:15:21 +0100 Subject: [PATCH] YamBMS 1.7.0 examples (2026.02.16) --- YamBMS_LP_DEMO.yaml | 414 ++++++++++++++++++ YamBMS_LP_PVbrain2.yaml | 11 +- YamBMS_Local_Packages_example.yaml | 12 +- YamBMS_RP_BMS_BASEN_RS485.yaml | 20 +- YamBMS_RP_BMS_DEYE_CAN.yaml | 20 +- YamBMS_RP_BMS_EG4_RS485.yaml | 20 +- YamBMS_RP_BMS_Ecoworthy_RS485.yaml | 18 +- YamBMS_RP_BMS_JBD.yaml | 18 +- YamBMS_RP_BMS_JK-B_RS485_Modbus.yaml | 30 +- YamBMS_RP_BMS_JK-PB_RS485_Modbus.yaml | 30 +- YamBMS_RP_BMS_JK_BLE.yaml | 18 +- YamBMS_RP_BMS_JK_UART_4G-GPS.yaml | 18 +- YamBMS_RP_BMS_PACE_RS485_Modbus.yaml | 18 +- YamBMS_RP_BMS_SEPLOS_V1_V2_RS485_Modbus.yaml | 20 +- ...RP_BMS_SEPLOS_V3_RS485_Modbus_sniffer.yaml | 32 +- YamBMS_RP_Balancer.yaml | 20 +- YamBMS_RP_DEMO.yaml | 20 +- YamBMS_RP_Ethernet_board.yaml | 13 +- YamBMS_RP_PVbrain2.yaml | 13 +- YamBMS_RP_RPi_Pico_Shunts_modbus_server.yaml | 12 +- YamBMS_Remote_Packages_example.yaml | 14 +- ...MS_Remote_Packages_example_dev_branch.yaml | 14 +- .../LP_BMS_example_BASEN_RS485.yaml | 6 +- .../LP_BMS_example_DEMO_Shunt_and_BMS.yaml | 10 +- .../single-node/LP_BMS_example_DEYE_CAN.yaml | 6 +- .../LP_BMS_example_EG4_LLV2_RS485_Modbus.yaml | 8 +- .../LP_BMS_example_Ecoworthy_RS485.yaml | 4 +- .../LP_BMS_example_JBD_UART_BLE.yaml | 6 +- ...P_BMS_example_JK-B_RS485_Modbus_mode2.yaml | 18 +- ..._BMS_example_JK-PB_RS485_Modbus_mode1.yaml | 16 +- ..._BMS_example_JK-PB_RS485_Modbus_mode2.yaml | 18 +- .../single-node/LP_BMS_example_JK_BLE.yaml | 6 +- .../LP_BMS_example_JK_UART_4G-GPS.yaml | 6 +- .../LP_BMS_example_PACE_RS485.yaml | 8 +- .../LP_BMS_example_SEPLOS_V1_V2_RS485.yaml | 8 +- ...P_BMS_example_SEPLOS_V3_RS485_sniffer.yaml | 25 +- examples/single-node/LP_Balancer_example.yaml | 8 +- examples/single-node/LP_Shunt_example.yaml | 8 +- .../RP_BMS_example_BASEN_RS485.yaml | 6 +- .../RP_BMS_example_DEMO_Shunt_and_BMS.yaml | 8 +- .../single-node/RP_BMS_example_DEYE_CAN.yaml | 6 +- .../RP_BMS_example_EG4_LLV2_RS485_Modbus.yaml | 8 +- .../RP_BMS_example_Ecoworthy_RS485.yaml | 4 +- .../RP_BMS_example_JBD_UART_BLE.yaml | 6 +- ...P_BMS_example_JK-B_RS485_Modbus_mode2.yaml | 18 +- ..._BMS_example_JK-PB_RS485_Modbus_mode2.yaml | 18 +- .../single-node/RP_BMS_example_JK_BLE.yaml | 6 +- .../RP_BMS_example_JK_UART_4G-GPS.yaml | 6 +- .../RP_BMS_example_PACE_RS485.yaml | 8 +- .../RP_BMS_example_SEPLOS_V1_V2_RS485.yaml | 8 +- ...P_BMS_example_SEPLOS_V3_RS485_sniffer.yaml | 39 +- examples/single-node/RP_Balancer_example.yaml | 8 +- examples/single-node/RP_Shunt_example.yaml | 8 +- 53 files changed, 799 insertions(+), 324 deletions(-) create mode 100644 YamBMS_LP_DEMO.yaml diff --git a/YamBMS_LP_DEMO.yaml b/YamBMS_LP_DEMO.yaml new file mode 100644 index 0000000..ce54881 --- /dev/null +++ b/YamBMS_LP_DEMO.yaml @@ -0,0 +1,414 @@ +# Updated : 2026.02.16 +# Version : 1.7.0 +# GitHub : https://github.com/Sleeper85/esphome-yambms + +# YamBMS ( Yet another multi-BMS Merging Solution ) + +# This YAML is free software: you can redistribute it and/or +# modify it under the terms of the GNU General Public License +# as published by the Free Software Foundation, either version 3 +# of the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. +# See the GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see . + +######################## YamBMS Remote Packages Version ######################## + +# You can compile this YAML directly without the `packages` folder. +# The packages will be automatically downloaded from GitHub. +# Don't forget to configure your WiFi credentials in the secrets.yaml + +################################################################################ + +# If needed, configure a static IP here +# wifi: +# manual_ip: +# static_ip: 192.168.0.85 +# gateway: 192.168.0.1 +# subnet: 255.255.255.0 +# dns1: 8.8.8.8 +# dns2: 8.8.4.4 + +logger: + level: DEBUG # VERBOSE / DEBUG / INFO / WARN + # baud_rate: 115200 # Send logs to the `hardware_uart` USB output (this consumes a UART interface) + # hardware_uart: UART0 # UART0 / USB_SERIAL_JTAG + +ota: + - platform: esphome + +# Uncomment: +# API: to monitor entities via Home Assistant +# MQTT: to monitor entities via another system +# Neither: to monitor entities only via `web_server` or nothing + +api: + reboot_timeout: 0s + +# mqtt: +# broker: !secret mqtt_host +# username: !secret mqtt_username +# password: !secret mqtt_password +# id: mqtt_client + +# +--------------------------------------+ +# | Global Settings | +# +--------------------------------------+ +substitutions: + # Name + friendly_name : 'YamBMS Demo' # Prefix added in front of the `entity name`, also used to classify them. + hostname: 'yambms-demo' # Name of your ESP32 registered on the IP network (DNS name, must be unique). + name: '' # This name can be added as a second prefix, both for the `entity display name` and the `entity id`, you can leave it blank. + # +--------------------------------------+ + # | YamBMS Settings | + # +--------------------------------------+ + # Please read the cut-off charging logic README to understand how the YamBMS works + yambms_id: 'yambms1' + yambms_name: 'YamBMS 1' + yambms_update_interval: '1s' + # Input numbers can be displayed as a slider or an input box, options are 'slider' or 'box'. + yambms_input_number_mode: 'slider' + # Please check and fill in the options below correctly according to your battery chemistry and number of cells in series. + # These parameters are important and used for charging logic. + # Battery Chemistry + yambms_battery_chemistry: '1' # 1-LFP | 2-Li-ion | 3-LTO + # Number of cells in series + yambms_cell_count: '16' + # Bulk / Absorption Voltage : corresponds to the Bulk voltage that will be used to charge the battery. (LFP : 55.2V = 3.45V/Cell for 16S battery) + yambms_bulk_v: '55.2' + # Float Voltage : corresponds to the voltage at which the battery would be maintained at the end of charge. (LFP : 53.6V = 3.35V/Cell for 16S battery) + yambms_float_v: '53.6' + # Rebulk voltage, voltage from which a new Bulk charge can start. (LFP : 52.8V = 3.3V/Cell for 16S battery) + yambms_rebulk_v: '52.8' + # Maximum time in minutes that the cut-off step can last before charging is complete + # If your cells are properly balanced this step ends at the fastest after the `cut-off timer` + # This timer can be deactivated with a switch + yambms_eoc_timer: '30' + # Time in seconds during which the end of charge conditions must be respected (cut-off + cells not equalizing) + yambms_cutoff_timer: '60' + # Max. charge current : corresponds to the maximum charge current which may be requested by YamBMS. + # The current requested will be proportional to the BMS count without ever exceeding this value. + yambms_max_requested_charge_current: '300' # in Ampere + # Max. discharge current : corresponds to the maximum discharge current which may be requested by YamBMS. + # The current requested will be proportional to the BMS count without ever exceeding this value. + yambms_max_requested_discharge_current: '300' # in Ampere + # +------------------------------------------------------------------------- + # | Temperature-based current limitation + # | Can be disabled via the switch "Temperature-based current limitation" + # | This factor is applied to the battery capacity (Ah), not the current + # | maximum charge/discharge current. For example : 280Ah x 0.5 = 140A + # +------------------------------------------------------------------------- + # Temperature °C -> Charge Rate (0.0C to 1.0C) + yambms_charging_rate_table: | + { + { -0.1, 0.00 }, + { 0.0, 0.05 }, + { 5.0, 0.12 }, + { 10.0, 0.30 }, + { 20.0, 0.50 }, + { 25.0, 0.50 }, + { 45.0, 0.50 }, + { 50.0, 0.50 }, + { 55.0, 0.50 }, + { 60.0, 0.00 } + } + # Temperature °C -> Discharge Rate (0.0C to 1.0C) + yambms_discharging_rate_table: | + { + {-30.0, 0.00 }, + {-20.0, 0.50 }, + {-10.0, 0.50 }, + { -5.0, 0.50 }, + { 0.0, 0.50 }, + { 5.0, 0.50 }, + { 45.0, 0.50 }, + { 50.0, 0.50 }, + { 55.0, 0.50 }, + { 60.0, 0.00 } + } + # +--------------------------------------+ + # | Shunt Settings | + # +--------------------------------------+ + shunt_update_interval: '3s' # frequency at which Shunt data is refreshed + # +--------------------------------------+ + # | BMS Settings | + # +--------------------------------------+ + bms_update_interval: '3s' # frequency at which BMS data is refreshed, going below '3s' can cause problems + # +--------------------------------------+ + # | Health & LED Assignment Logs | + # +--------------------------------------+ + enable_led_logging: 'false' # Set to true to see if an led is assigned to a component correctly, logged every 60 seconds + enable_health_logging: 'false' # Set to true to see if component health for all component instances, logged every 60 seconds + + + +# +--------------------------------------+ +# | Packages | +# +--------------------------------------+ + +# PLEASE READ : https://github.com/Sleeper85/esphome-yambms/blob/main/documents/README/YamBMS_LP_YAML.md + +packages: + + # +------------------------------------------------------------------------------+ + # | >>> UNCOMMENT YOUR BOARD + # | >>> ONLY ONE BOARD ! + # +------------------------------------------------------------------------------+ + + # This list is incomplete, other board.yaml are available in the board folder + + board: !include + file: 'packages/board/board_ESP32_Generic.yaml' + # file: 'packages/board/board_ESP32_Atom-Lite.yaml' + # file: 'packages/board/board_ESP32_DevKit-V1.yaml' + # file: 'packages/board/board_ESP32_EVB.yaml' + # file: 'packages/board/board_ESP32_iBMS_CAN_RS485_V3.3.yaml' + # file: 'packages/board/board_ESP32_LilyGo-T-CAN485.yaml' + # file: 'packages/board/board_ESP32-C3_DevKitM-1.yaml' + # file: 'packages/board/board_ESP32-C3_ETH01-EVO.yaml' + # file: 'packages/board/board_ESP32-C3_FlipC3.yaml' + # file: 'packages/board/board_ESP32-S3_Generic.yaml' + # file: 'packages/board/board_ESP32-S3_AtomS3-Lite.yaml' + # file: 'packages/board/board_ESP32-S3_AtomS3.yaml' + # file: 'packages/board/board_ESP32-S3_AtomS3R.yaml' + # file: 'packages/board/board_ESP32-S3_DevKitC-1_LED-38.yaml' + # file: 'packages/board/board_ESP32-S3_DevKitC-1_LED-48.yaml' + # file: 'packages/board/board_ESP32-S3_LilyGo-T-Connect.yaml' + # file: 'packages/board/board_ESP32-S3_LilyGo-T-Connect-Pro.yaml' + # file: 'packages/board/board_ESP32-S3_WS-ETH.yaml' + # file: 'packages/board/board_ESP32-S3_WS-RS485-CAN.yaml' + # file: 'packages/board/board_ESP32-S3_WS-Touch-LCD-4.3.yaml' + # file: 'packages/board/board_ESP32-S3_WS-Touch-LCD-7.yaml' + # file: 'packages/board/board_ESP32-S3_XIAO.yaml' + # file: 'packages/board/board_ESP32-S3_YBoard.yaml' + + # vars: + # server_status_led_id: 'virtual_status_light' # led used to show status. Default = esp_light, set specific led or set to 'virtual_status_light' to disable + # network_status_led_id: 'virtual_status_light' # led used to show status. Default = esp_light, set specific led or set to 'virtual_status_light' to disable + + # +------------------------------------------------------------------------------+ + # | >>> Board Display + # | >>> Uncomment the display that corresponds to your board + # +------------------------------------------------------------------------------+ + + # board_display: !include + # file: 'packages/board/board_options_display_128x128.yaml' # AtomS3 / AtomS3R display + # file: 'packages/board/board_options_display_480x222.yaml' # LilyGo T-Connect Pro display + # vars: + # display_auto_next_page_interval: '5s' + # display_rotation: '0' # 0/90/180/270 rotation angle in degrees + + + + # +------------------------------------------------------------------------------+ + # | >>> Board Options + # | >>> Uncomment your interfaces and options + # +------------------------------------------------------------------------------+ + + # UART 1 (uart_id: uart_esp_1) + uart_esp_1: !include packages/board/board_options_itf_uart_esp_1.yaml + # UART 2 (uart_id: uart_esp_2) + # uart_esp_2: !include packages/board/board_options_itf_uart_esp_2.yaml + # UART 3 (uart_id: uart_esp_3) + # uart_esp_3: !include packages/board/board_options_itf_uart_esp_3.yaml + + # UART flow control + # uart_flow_control: !include + # file: packages/board/board_options_itf_uart_flow_control.yaml + # vars: + # uart_id: 'uart_esp_1' + # uart_flow_control_pin: ${talk_pin} + + # CAN transceiver - ESP32_CAN (TJA105x, SN65HVD230, M5Stack CAN base/unit) + canbus_node_1: !include + file: packages/board/board_options_itf_canbus_esp32_can.yaml + vars: + # to bms = canbus_bms_1 + # to inverter = canbus_inverter_1 + canbus_node_id: 'canbus_inverter_1' + + # CAN transceiver - MCP2515 + # canbus_node_2: !include + # file: packages/board/board_options_itf_canbus_mcp2515.yaml + # vars: + # # to bms = canbus_bms_1 + # # to inverter = canbus_inverter_1 + # canbus_node_id: 'canbus_inverter_1' + + # PSRAM octal 80Mhz + # psram_octal_80Mhz: !include packages/board/board_options_PSRAM_octal_80Mhz.yaml + + # Web Server + # web_server: !include packages/yambms/yambms_web_server.yaml + + # WiFi AP @ 192.168.4.1 + # wifi_ap: !include packages/board/board_options_wifi_ap.yaml + + # Captive Portal @ 192.168.4.1 + # captive_portal: !include packages/board/board_options_captive_portal.yaml + + + + # +------------------------------------------------------------------------------+ + # | >>> BMS / Balancer / Shunt + # +------------------------------------------------------------------------------+ + + # You don't have to import a shunt but you must import at least one BMS. + # You can mix different BMS models, the only condition is that the `bms_id` are numbered in order starting from 1 ! + + # >>> Copy your BMS / Balancer / Shunt packages here + # >>> You can find examples at this address : + # >>> https://github.com/Sleeper85/esphome-yambms/tree/main/examples/single-node/ + + shunt1: !include + file: packages/shunt/shunt_combine_FAKE.yaml + vars: + shunt_id: '1' # must be a number + shunt_name: 'Shunt 1' + # Shunt sensors values + shunt_voltage: '52.81' # V + shunt_current: '17.5' # A + shunt_power: '924' # W + shunt_soc: '50' # % + shunt_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable + + bms1: !include + file: packages/bms/bms_combine_DEMO.yaml + vars: + bms_id: '1' # must be a number + bms_name: 'BMS 1' + # BMS sensors values + bms_battery_capacity: '280' # Ah + bms_current: '9.2' # A + bms_soc: '87' # % + bms_soh: '98' # % + bms_min_cell_voltage: '3.339' # V + bms_max_cell_voltage: '3.341' # V + bms_min_temperature: '9.1' # °C + bms_max_temperature: '9.3' # °C + bms_max_charge_current: '100' # A + bms_max_discharge_current: '100' # A + bms_cell_ovp: '3.650' # V Used by 'Auto CCL' functions + bms_cell_uvp: '2.800' # V Used by 'Auto DCL' functions and to calculate maximum discharge voltage + bms_balance_trigger_voltage: '0.010' # V Used by 'Auto CVL' functions + bms_charging_cycles: '178' # charging cycles number Used to calculate the SoH + bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable + + bms2: !include + file: packages/bms/bms_combine_DEMO.yaml + vars: + bms_id: '2' # must be a number + bms_name: 'BMS 2' + # BMS sensors values + bms_battery_capacity: '280' # Ah + bms_current: '11.3' # A + bms_soc: '85' # % + bms_soh: '89' # % + bms_min_cell_voltage: '3.337' # V + bms_max_cell_voltage: '3.339' # V + bms_min_temperature: '15.1' # °C + bms_max_temperature: '15.3' # °C + bms_max_charge_current: '100' # A + bms_max_discharge_current: '100' # A + bms_cell_ovp: '3.650' # V Used by 'Auto CCL' functions + bms_cell_uvp: '2.800' # V Used by 'Auto DCL' functions and to calculate maximum discharge voltage + bms_balance_trigger_voltage: '0.010' # V Used by 'Auto CVL' functions + bms_charging_cycles: '226' # charging cycles number Used to calculate the SoH + bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable + + bms3: !include + file: packages/bms/bms_combine_DEMO.yaml + vars: + bms_id: '3' # must be a number + bms_name: 'BMS 3' + # BMS sensors values + bms_battery_capacity: '280' # Ah + bms_current: '15.7' # A + bms_soc: '83' # % + bms_soh: '79' # % + bms_min_cell_voltage: '3.334' # V + bms_max_cell_voltage: '3.336' # V + bms_min_temperature: '20.1' # °C + bms_max_temperature: '20.3' # °C + bms_max_charge_current: '100' # A + bms_max_discharge_current: '100' # A + bms_cell_ovp: '3.650' # V Used by 'Auto CCL' functions + bms_cell_uvp: '2.800' # V Used by 'Auto DCL' functions and to calculate maximum discharge voltage + bms_balance_trigger_voltage: '0.010' # V Used by 'Auto CVL' functions + bms_charging_cycles: '194' # charging cycles number Used to calculate the SoH + bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable + + + + # +------------------------------------------------------------------------------+ + # | >>> YamBMS + # +------------------------------------------------------------------------------+ + + yambms: !include packages/yambms/yambms.yaml + + + + # +------------------------------------------------------------------------------+ + # | >>> CAN bus to Inverter + # +------------------------------------------------------------------------------+ + + canbus1: !include + file: packages/yambms/yambms_canbus.yaml # yambms_canbus_web_server.yaml + vars: + canbus_id: '1' # Must be a number + canbus_name: 'CANBUS 1' + canbus_node_id: 'canbus_inverter_1' # CAN bus node to which your inverter is connected + canbus_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable + # The CAN bus link will be paused for `30s` if the inverter does not respond with an ACK (can_id 0x305) + # before the end of the `canbus_link_timer` (5s by default). + canbus_link_timer: '5s' + canbus_extended_ack: 'false' # Set to 'true' for enable extended 29-bit IDs for the ACK can_id 0x305 (required for Schneider XW Pro) + + + + # +------------------------------------------------------------------------------+ + # | >>> RS485 bus to Inverter + # +------------------------------------------------------------------------------+ + + # rs485_pylon: !include + # file: packages/yambms/yambms_rs485_pylon.yaml # yambms_rs485_pylon_web_server.yaml + # vars: + # rs485_id: '1' # Must be a number + # rs485_name: 'RS485 1' + # rs485_uart_id: 'uart_esp_3' # UART interface to which your inverter is connected + # rs485_uart_baud_rate: '9600' + # rs485_update_timeout: '5s' + # rs485_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable + + + + # +------------------------------------------------------------------------------+ + # | >>> DEBUG ( logger level must be DEBUG ) + # +------------------------------------------------------------------------------+ + + device_debug: !include + file: packages/base/device_debug_ESP32.yaml + # file: packages/base/device_debug_ESP32_PSRAM.yaml + vars: + debug_name: 'Debug' + debug_update_interval: '5s' + # Size of your PSRAM in bits + # 8Mb='8388608' | 6Mb='6291456' | 4Mb='4194304' | 2Mb='2097152' | NoPSRAM='0' + debug_psram_size: '8388608' + + + + # +------------------------------------------------------------------------------+ + # | >>> Config and Custom Local Packages + # +------------------------------------------------------------------------------+ + + # Local Packages intended for creating custom codes + # or sharing settings between several main.yaml + + # yambms_config: !include yambms_config.yaml + # yambms_custom: !include yambms_custom.yaml diff --git a/YamBMS_LP_PVbrain2.yaml b/YamBMS_LP_PVbrain2.yaml index d033050..e27fe72 100644 --- a/YamBMS_LP_PVbrain2.yaml +++ b/YamBMS_LP_PVbrain2.yaml @@ -1,4 +1,4 @@ -# Updated : 2026.02.05 +# Updated : 2026.02.16 # Version : 1.7.0 # GitHub : https://github.com/Sleeper85/esphome-yambms @@ -259,10 +259,11 @@ packages: canbus_id: '1' # Must be a number canbus_name: 'CANBUS 1' canbus_node_id: 'canbus_inverter_1' # CAN bus node to which your inverter is connected - canbus_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable - # The CANBUS link will be considered down if no response from the inverter (ID 0x305) for 5s - # The Deye inverter sends the ACK (can_id 0x305) only when it receives the can_id 0x356 + canbus_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable + # The CAN bus link will be paused for `30s` if the inverter does not respond with an ACK (can_id 0x305) + # before the end of the `canbus_link_timer` (5s by default). canbus_link_timer: '5s' + canbus_extended_ack: 'false' # Set to 'true' for enable extended 29-bit IDs for the ACK can_id 0x305 (required for Schneider XW Pro) @@ -278,7 +279,7 @@ packages: # rs485_uart_id: 'uart_esp_3' # UART interface to which your inverter is connected # rs485_uart_baud_rate: '9600' # rs485_update_timeout: '5s' - # rs485_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable + # rs485_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable # +------------------------------------------------------------------------------+ diff --git a/YamBMS_Local_Packages_example.yaml b/YamBMS_Local_Packages_example.yaml index 6cdc1d0..fe8f81d 100644 --- a/YamBMS_Local_Packages_example.yaml +++ b/YamBMS_Local_Packages_example.yaml @@ -1,4 +1,4 @@ -# Updated : 2026.02.05 +# Updated : 2026.02.16 # Version : 1.7.0 # GitHub : https://github.com/Sleeper85/esphome-yambms @@ -172,6 +172,7 @@ packages: # file: 'packages/board/board_ESP32-C3_DevKitM-1.yaml' # file: 'packages/board/board_ESP32-C3_ETH01-EVO.yaml' # file: 'packages/board/board_ESP32-C3_FlipC3.yaml' + # file: 'packages/board/board_ESP32-S3_Generic.yaml' # file: 'packages/board/board_ESP32-S3_AtomS3-Lite.yaml' # file: 'packages/board/board_ESP32-S3_AtomS3.yaml' # file: 'packages/board/board_ESP32-S3_AtomS3R.yaml' @@ -284,10 +285,11 @@ packages: canbus_id: '1' # Must be a number canbus_name: 'CANBUS 1' canbus_node_id: 'canbus_inverter_1' # CAN bus node to which your inverter is connected - canbus_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable - # The CANBUS link will be considered down if no response from the inverter (ID 0x305) for 5s - # The Deye inverter sends the ACK (can_id 0x305) only when it receives the can_id 0x356 + canbus_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable + # The CAN bus link will be paused for `30s` if the inverter does not respond with an ACK (can_id 0x305) + # before the end of the `canbus_link_timer` (5s by default). canbus_link_timer: '5s' + canbus_extended_ack: 'false' # Set to 'true' for enable extended 29-bit IDs for the ACK can_id 0x305 (required for Schneider XW Pro) @@ -303,7 +305,7 @@ packages: # rs485_uart_id: 'uart_esp_3' # UART interface to which your inverter is connected # rs485_uart_baud_rate: '9600' # rs485_update_timeout: '5s' - # rs485_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable + # rs485_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable diff --git a/YamBMS_RP_BMS_BASEN_RS485.yaml b/YamBMS_RP_BMS_BASEN_RS485.yaml index 633cc60..91188fb 100644 --- a/YamBMS_RP_BMS_BASEN_RS485.yaml +++ b/YamBMS_RP_BMS_BASEN_RS485.yaml @@ -1,4 +1,4 @@ -# Updated : 2026.02.05 +# Updated : 2026.02.16 # Version : 1.7.0 # GitHub : https://github.com/Sleeper85/esphome-yambms @@ -174,6 +174,7 @@ packages: # - path: 'packages/board/board_ESP32-C3_DevKitM-1.yaml' # - path: 'packages/board/board_ESP32-C3_ETH01-EVO.yaml' # - path: 'packages/board/board_ESP32-C3_FlipC3.yaml' + # - path: 'packages/board/board_ESP32-S3_Generic.yaml' # - path: 'packages/board/board_ESP32-S3_AtomS3-Lite.yaml' # - path: 'packages/board/board_ESP32-S3_AtomS3.yaml' # - path: 'packages/board/board_ESP32-S3_AtomS3R.yaml' @@ -271,21 +272,21 @@ packages: basen_uart_id: 'uart_esp_1' basen_uart_baud_rate: '9600' basen_controller_id: "basen_controller_1" - bms_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable + bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable # Basen module 1 - path: packages/bms/bms_combine_BASEN_RS485_full.yaml vars: bms_id: '1' # must be a number bms_name: 'BASEN-BMS 1' bms_address: '0x01' - bms_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable + bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable # Basen module 2 - path: packages/bms/bms_combine_BASEN_RS485_full.yaml vars: bms_id: '2' # must be a number bms_name: 'BASEN-BMS 2' bms_address: '0x02' - bms_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable + bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable @@ -303,13 +304,14 @@ packages: - path: 'packages/yambms/yambms_canbus.yaml' # yambms_canbus_web_server.yaml vars: - canbus_id: '1' # Must be a number + canbus_id: '1' # must be a number canbus_name: 'CANBUS 1' canbus_node_id: 'canbus_inverter_1' # CAN bus node to which your inverter is connected - canbus_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable - # The CANBUS link will be considered down if no response from the inverter (ID 0x305) for 5s - # The Deye inverter sends the ACK (can_id 0x305) only when it receives the can_id 0x356 + canbus_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable + # The CAN bus link will be paused for `30s` if the inverter does not respond with an ACK (can_id 0x305) + # before the end of the `canbus_link_timer` (5s by default). canbus_link_timer: '5s' + canbus_extended_ack: 'false' # Set to 'true' for enable extended 29-bit IDs (required for Schneider XW Pro) @@ -324,7 +326,7 @@ packages: # rs485_uart_id: 'uart_esp_3' # UART interface to which your inverter is connected # rs485_uart_baud_rate: '9600' # rs485_update_timeout: '5s' - # rs485_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable + # rs485_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable diff --git a/YamBMS_RP_BMS_DEYE_CAN.yaml b/YamBMS_RP_BMS_DEYE_CAN.yaml index 360e6bb..ac5bd95 100644 --- a/YamBMS_RP_BMS_DEYE_CAN.yaml +++ b/YamBMS_RP_BMS_DEYE_CAN.yaml @@ -1,4 +1,4 @@ -# Updated : 2026.02.05 +# Updated : 2026.02.16 # Version : 1.7.0 # GitHub : https://github.com/Sleeper85/esphome-yambms @@ -174,6 +174,7 @@ packages: # - path: 'packages/board/board_ESP32-C3_DevKitM-1.yaml' # - path: 'packages/board/board_ESP32-C3_ETH01-EVO.yaml' # - path: 'packages/board/board_ESP32-C3_FlipC3.yaml' + # - path: 'packages/board/board_ESP32-S3_Generic.yaml' # - path: 'packages/board/board_ESP32-S3_AtomS3-Lite.yaml' # - path: 'packages/board/board_ESP32-S3_AtomS3.yaml' # - path: 'packages/board/board_ESP32-S3_AtomS3R.yaml' @@ -283,7 +284,7 @@ packages: bms_name: 'DEYE-BMS 1' deye_id: '1' deye_module_id: '0' # Modules are numbered with 0-9 - bms_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable + bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable # Deye module 2 - path: 'packages/bms/bms_combine_DEYE_CAN_module_full.yaml' vars: @@ -294,7 +295,7 @@ packages: bms_id: '2' # must be a number bms_name: 'DEYE-BMS 2' deye_module_id: '1' # Modules are numbered with 0-9 - bms_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable + bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable @@ -312,13 +313,14 @@ packages: - path: 'packages/yambms/yambms_canbus.yaml' # yambms_canbus_web_server.yaml vars: - canbus_id: '1' # Must be a number + canbus_id: '1' # must be a number canbus_name: 'CANBUS 1' - canbus_node_id: 'canbus_inverter_1' - canbus_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable - # The CANBUS link will be considered down if no response from the inverter (ID 0x305) for 5s - # The Deye inverter sends the ACK (can_id 0x305) only when it receives the can_id 0x356 + canbus_node_id: 'canbus_inverter_1' # CAN bus node to which your inverter is connected + canbus_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable + # The CAN bus link will be paused for `30s` if the inverter does not respond with an ACK (can_id 0x305) + # before the end of the `canbus_link_timer` (5s by default). canbus_link_timer: '5s' + canbus_extended_ack: 'false' # Set to 'true' for enable extended 29-bit IDs (required for Schneider XW Pro) @@ -333,7 +335,7 @@ packages: # rs485_uart_id: 'uart_esp_3' # UART interface to which your inverter is connected # rs485_uart_baud_rate: '9600' # rs485_update_timeout: '5s' - # rs485_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable + # rs485_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable diff --git a/YamBMS_RP_BMS_EG4_RS485.yaml b/YamBMS_RP_BMS_EG4_RS485.yaml index 5b92082..db23129 100644 --- a/YamBMS_RP_BMS_EG4_RS485.yaml +++ b/YamBMS_RP_BMS_EG4_RS485.yaml @@ -1,4 +1,4 @@ -# Updated : 2026.02.05 +# Updated : 2026.02.16 # Version : 1.7.0 # GitHub : https://github.com/Sleeper85/esphome-yambms @@ -174,6 +174,7 @@ packages: # - path: 'packages/board/board_ESP32-C3_DevKitM-1.yaml' # - path: 'packages/board/board_ESP32-C3_ETH01-EVO.yaml' # - path: 'packages/board/board_ESP32-C3_FlipC3.yaml' + # - path: 'packages/board/board_ESP32-S3_Generic.yaml' # - path: 'packages/board/board_ESP32-S3_AtomS3-Lite.yaml' # - path: 'packages/board/board_ESP32-S3_AtomS3.yaml' # - path: 'packages/board/board_ESP32-S3_AtomS3R.yaml' @@ -277,21 +278,21 @@ packages: bms_name: 'EG4-BMS 1' ## BMS address must start at 2 with EG4 LLV2, ID 1 is a special case and has different output. bms_address: 2 # BMS 1 modbus address - bms_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable + bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable # BMS 2 - path: 'packages/bms/bms_combine_EG4_LLV2_RS485_bms_full.yaml' vars: bms_id: '2' # must be a number bms_name: 'EG4-BMS 2' bms_address: 3 # BMS 2 modbus address - bms_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable + bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable # BMS 3 - path: 'packages/bms/bms_combine_EG4_LLV2_RS485_bms_full.yaml' vars: bms_id: '3' # must be a number bms_name: 'EG4-BMS 3' bms_address: 4 # BMS 3 modbus address - bms_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable + bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable @@ -309,13 +310,14 @@ packages: - path: 'packages/yambms/yambms_canbus.yaml' # yambms_canbus_web_server.yaml vars: - canbus_id: '1' # Must be a number + canbus_id: '1' # must be a number canbus_name: 'CANBUS 1' canbus_node_id: 'canbus_inverter_1' # CAN bus node to which your inverter is connected - canbus_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable - # The CANBUS link will be considered down if no response from the inverter (ID 0x305) for 5s - # The Deye inverter sends the ACK (can_id 0x305) only when it receives the can_id 0x356 + canbus_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable + # The CAN bus link will be paused for `30s` if the inverter does not respond with an ACK (can_id 0x305) + # before the end of the `canbus_link_timer` (5s by default). canbus_link_timer: '5s' + canbus_extended_ack: 'false' # Set to 'true' for enable extended 29-bit IDs (required for Schneider XW Pro) @@ -330,7 +332,7 @@ packages: # rs485_uart_id: 'uart_esp_3' # UART interface to which your inverter is connected # rs485_uart_baud_rate: '9600' # rs485_update_timeout: '5s' - # rs485_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable + # rs485_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable diff --git a/YamBMS_RP_BMS_Ecoworthy_RS485.yaml b/YamBMS_RP_BMS_Ecoworthy_RS485.yaml index 0e03d71..855aeff 100644 --- a/YamBMS_RP_BMS_Ecoworthy_RS485.yaml +++ b/YamBMS_RP_BMS_Ecoworthy_RS485.yaml @@ -1,4 +1,4 @@ -# Updated : 2026.02.05 +# Updated : 2026.02.16 # Version : 1.7.0 # GitHub : https://github.com/Sleeper85/esphome-yambms @@ -174,6 +174,7 @@ packages: # - path: 'packages/board/board_ESP32-C3_DevKitM-1.yaml' # - path: 'packages/board/board_ESP32-C3_ETH01-EVO.yaml' # - path: 'packages/board/board_ESP32-C3_FlipC3.yaml' + # - path: 'packages/board/board_ESP32-S3_Generic.yaml' # - path: 'packages/board/board_ESP32-S3_AtomS3-Lite.yaml' # - path: 'packages/board/board_ESP32-S3_AtomS3.yaml' # - path: 'packages/board/board_ESP32-S3_AtomS3R.yaml' @@ -281,7 +282,7 @@ packages: bms_cell_ovp: '3.650' # V. Cell over-voltage protection bms_cell_uvp: '2.500' # V. Cell under-voltage protection bms_balance_trigger_voltage: '0.030' # V. Balance trigger voltage - bms_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable + bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable # BMS 2 - path: 'packages/bms/bms_combine_Ecoworthy_RS485.yaml' vars: @@ -293,7 +294,7 @@ packages: bms_cell_ovp: '3.650' # V. Cell over-voltage protection bms_cell_uvp: '2.500' # V. Cell under-voltage protection bms_balance_trigger_voltage: '0.030' # V. Balance trigger voltage - bms_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable + bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable # +------------------------------------------------------------------------------+ @@ -310,13 +311,14 @@ packages: - path: 'packages/yambms/yambms_canbus.yaml' # yambms_canbus_web_server.yaml vars: - canbus_id: '1' # Must be a number + canbus_id: '1' # must be a number canbus_name: 'CANBUS 1' canbus_node_id: 'canbus_inverter_1' # CAN bus node to which your inverter is connected - canbus_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable - # The CANBUS link will be considered down if no response from the inverter (ID 0x305) for 5s - # The Deye inverter sends the ACK (can_id 0x305) only when it receives the can_id 0x356 + canbus_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable + # The CAN bus link will be paused for `30s` if the inverter does not respond with an ACK (can_id 0x305) + # before the end of the `canbus_link_timer` (5s by default). canbus_link_timer: '5s' + canbus_extended_ack: 'false' # Set to 'true' for enable extended 29-bit IDs (required for Schneider XW Pro) @@ -331,7 +333,7 @@ packages: # rs485_uart_id: 'uart_esp_3' # UART interface to which your inverter is connected # rs485_uart_baud_rate: '9600' # rs485_update_timeout: '5s' - # rs485_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable + # rs485_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable # +------------------------------------------------------------------------------+ diff --git a/YamBMS_RP_BMS_JBD.yaml b/YamBMS_RP_BMS_JBD.yaml index 5fc8593..4614163 100644 --- a/YamBMS_RP_BMS_JBD.yaml +++ b/YamBMS_RP_BMS_JBD.yaml @@ -1,4 +1,4 @@ -# Updated : 2026.02.05 +# Updated : 2026.02.16 # Version : 1. # GitHub : https://github.com/Sleeper85/esphome-yambms @@ -174,6 +174,7 @@ packages: # - path: 'packages/board/board_ESP32-C3_DevKitM-1.yaml' # - path: 'packages/board/board_ESP32-C3_ETH01-EVO.yaml' # - path: 'packages/board/board_ESP32-C3_FlipC3.yaml' + # - path: 'packages/board/board_ESP32-S3_Generic.yaml' # - path: 'packages/board/board_ESP32-S3_AtomS3-Lite.yaml' # - path: 'packages/board/board_ESP32-S3_AtomS3.yaml' # - path: 'packages/board/board_ESP32-S3_AtomS3R.yaml' @@ -283,7 +284,7 @@ packages: # Maximum cell charging cycles is used to calculate the battey SoH. # MB31=8000.0, LF280K v3=8000.0, LF280K v2=6000.0, LF280=3000.0 (decimal is required) bms_cell_max_cycles: '6000.0' - bms_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable + bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable # BMS 2 - path: 'packages/bms/bms_combine_JBD_BLE_full.yaml' vars: @@ -301,7 +302,7 @@ packages: # Maximum cell charging cycles is used to calculate the battey SoH. # MB31=8000.0, LF280K v3=8000.0, LF280K v2=6000.0, LF280=3000.0 (decimal is required) bms_cell_max_cycles: '6000.0' - bms_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable + bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable @@ -319,13 +320,14 @@ packages: - path: 'packages/yambms/yambms_canbus.yaml' # yambms_canbus_web_server.yaml vars: - canbus_id: '1' # Must be a number + canbus_id: '1' # must be a number canbus_name: 'CANBUS 1' canbus_node_id: 'canbus_inverter_1' # CAN bus node to which your inverter is connected - canbus_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable - # The CANBUS link will be considered down if no response from the inverter (ID 0x305) for 5s - # The Deye inverter sends the ACK (can_id 0x305) only when it receives the can_id 0x356 + canbus_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable + # The CAN bus link will be paused for `30s` if the inverter does not respond with an ACK (can_id 0x305) + # before the end of the `canbus_link_timer` (5s by default). canbus_link_timer: '5s' + canbus_extended_ack: 'false' # Set to 'true' for enable extended 29-bit IDs (required for Schneider XW Pro) @@ -340,7 +342,7 @@ packages: # rs485_uart_id: 'uart_esp_3' # UART interface to which your inverter is connected # rs485_uart_baud_rate: '9600' # rs485_update_timeout: '5s' - # rs485_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable + # rs485_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable diff --git a/YamBMS_RP_BMS_JK-B_RS485_Modbus.yaml b/YamBMS_RP_BMS_JK-B_RS485_Modbus.yaml index be3b845..c3cd205 100644 --- a/YamBMS_RP_BMS_JK-B_RS485_Modbus.yaml +++ b/YamBMS_RP_BMS_JK-B_RS485_Modbus.yaml @@ -1,4 +1,4 @@ -# Updated : 2026.02.05 +# Updated : 2026.02.16 # Version : 1.7.0 # GitHub : https://github.com/Sleeper85/esphome-yambms @@ -174,6 +174,7 @@ packages: # - path: 'packages/board/board_ESP32-C3_DevKitM-1.yaml' # - path: 'packages/board/board_ESP32-C3_ETH01-EVO.yaml' # - path: 'packages/board/board_ESP32-C3_FlipC3.yaml' + # - path: 'packages/board/board_ESP32-S3_Generic.yaml' # - path: 'packages/board/board_ESP32-S3_AtomS3-Lite.yaml' # - path: 'packages/board/board_ESP32-S3_AtomS3.yaml' # - path: 'packages/board/board_ESP32-S3_AtomS3R.yaml' @@ -282,56 +283,56 @@ packages: bms_id: '1' # must be a number bms_name: 'JK-BMS 1' bms_address: '0x01' # BMS 1 ( JK app `Device Addr.` setting ) - bms_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable + bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable # BMS 2 - path: 'packages/bms/bms_combine_JK_RS485_Modbus_JK-B_standard.yaml' vars: bms_id: '2' # must be a number bms_name: 'JK-BMS 2' bms_address: '0x02' # BMS 2 ( JK app `Device Addr.` setting ) - bms_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable + bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable # BMS 3 - path: 'packages/bms/bms_combine_JK_RS485_Modbus_JK-B_standard.yaml' vars: bms_id: '3' # must be a number bms_name: 'JK-BMS 3' bms_address: '0x03' # BMS 3 ( JK app `Device Addr.` setting ) - bms_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable + bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable # BMS 4 - path: 'packages/bms/bms_combine_JK_RS485_Modbus_JK-B_standard.yaml' vars: bms_id: '4' # must be a number bms_name: 'JK-BMS 4' bms_address: '0x04' # BMS 4 ( JK app `Device Addr.` setting ) - bms_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable + bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable # BMS 5 - path: 'packages/bms/bms_combine_JK_RS485_Modbus_JK-B_standard.yaml' vars: bms_id: '5' # must be a number bms_name: 'JK-BMS 5' bms_address: '0x05' # BMS 5 ( JK app `Device Addr.` setting ) - bms_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable + bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable # BMS 6 - path: 'packages/bms/bms_combine_JK_RS485_Modbus_JK-B_standard.yaml' vars: bms_id: '6' # must be a number bms_name: 'JK-BMS 6' bms_address: '0x06' # BMS 6 ( JK app `Device Addr.` setting ) - bms_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable + bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable # BMS 7 - path: 'packages/bms/bms_combine_JK_RS485_Modbus_JK-B_standard.yaml' vars: bms_id: '7' # must be a number bms_name: 'JK-BMS 7' bms_address: '0x07' # BMS 7 ( JK app `Device Addr.` setting ) - bms_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable + bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable # BMS 8 - path: 'packages/bms/bms_combine_JK_RS485_Modbus_JK-B_standard.yaml' vars: bms_id: '8' # must be a number bms_name: 'JK-BMS 8' bms_address: '0x08' # BMS 8 ( JK app `Device Addr.` setting ) - bms_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable + bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable @@ -349,13 +350,14 @@ packages: - path: 'packages/yambms/yambms_canbus.yaml' # yambms_canbus_web_server.yaml vars: - canbus_id: '1' # Must be a number + canbus_id: '1' # must be a number canbus_name: 'CANBUS 1' canbus_node_id: 'canbus_inverter_1' # CAN bus node to which your inverter is connected - canbus_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable - # The CANBUS link will be considered down if no response from the inverter (ID 0x305) for 5s - # The Deye inverter sends the ACK (can_id 0x305) only when it receives the can_id 0x356 + canbus_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable + # The CAN bus link will be paused for `30s` if the inverter does not respond with an ACK (can_id 0x305) + # before the end of the `canbus_link_timer` (5s by default). canbus_link_timer: '5s' + canbus_extended_ack: 'false' # Set to 'true' for enable extended 29-bit IDs (required for Schneider XW Pro) @@ -370,7 +372,7 @@ packages: # rs485_uart_id: 'uart_esp_3' # UART interface to which your inverter is connected # rs485_uart_baud_rate: '9600' # rs485_update_timeout: '5s' - # rs485_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable + # rs485_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable diff --git a/YamBMS_RP_BMS_JK-PB_RS485_Modbus.yaml b/YamBMS_RP_BMS_JK-PB_RS485_Modbus.yaml index b5132c6..bf348ad 100644 --- a/YamBMS_RP_BMS_JK-PB_RS485_Modbus.yaml +++ b/YamBMS_RP_BMS_JK-PB_RS485_Modbus.yaml @@ -1,4 +1,4 @@ -# Updated : 2026.02.05 +# Updated : 2026.02.16 # Version : 1.7.0 # GitHub : https://github.com/Sleeper85/esphome-yambms @@ -174,6 +174,7 @@ packages: # - path: 'packages/board/board_ESP32-C3_DevKitM-1.yaml' # - path: 'packages/board/board_ESP32-C3_ETH01-EVO.yaml' # - path: 'packages/board/board_ESP32-C3_FlipC3.yaml' + # - path: 'packages/board/board_ESP32-S3_Generic.yaml' # - path: 'packages/board/board_ESP32-S3_AtomS3-Lite.yaml' # - path: 'packages/board/board_ESP32-S3_AtomS3.yaml' # - path: 'packages/board/board_ESP32-S3_AtomS3R.yaml' @@ -282,56 +283,56 @@ packages: bms_id: '1' # must be a number bms_name: 'JK-BMS 1' bms_address: '0x01' # BMS 1 DIP switch - bms_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable + bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable # BMS 2 - path: 'packages/bms/bms_combine_JK_RS485_Modbus_bms_standard.yaml' vars: bms_id: '2' # must be a number bms_name: 'JK-BMS 2' bms_address: '0x02' # BMS 2 DIP switch - bms_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable + bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable # BMS 3 - path: 'packages/bms/bms_combine_JK_RS485_Modbus_bms_standard.yaml' vars: bms_id: '3' # must be a number bms_name: 'JK-BMS 3' bms_address: '0x03' # BMS 3 DIP switch - bms_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable + bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable # BMS 4 - path: 'packages/bms/bms_combine_JK_RS485_Modbus_bms_standard.yaml' vars: bms_id: '4' # must be a number bms_name: 'JK-BMS 4' bms_address: '0x04' # BMS 4 DIP switch - bms_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable + bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable # BMS 5 - path: 'packages/bms/bms_combine_JK_RS485_Modbus_bms_standard.yaml' vars: bms_id: '5' # must be a number bms_name: 'JK-BMS 5' bms_address: '0x05' # BMS 5 DIP switch - bms_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable + bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable # BMS 6 - path: 'packages/bms/bms_combine_JK_RS485_Modbus_bms_standard.yaml' vars: bms_id: '6' # must be a number bms_name: 'JK-BMS 6' bms_address: '0x06' # BMS 6 DIP switch - bms_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable + bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable # BMS 7 - path: 'packages/bms/bms_combine_JK_RS485_Modbus_bms_standard.yaml' vars: bms_id: '7' # must be a number bms_name: 'JK-BMS 7' bms_address: '0x07' # BMS 7 DIP switch - bms_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable + bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable # BMS 8 - path: 'packages/bms/bms_combine_JK_RS485_Modbus_bms_standard.yaml' vars: bms_id: '8' # must be a number bms_name: 'JK-BMS 8' bms_address: '0x08' # BMS 8 DIP switch - bms_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable + bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable @@ -349,13 +350,14 @@ packages: - path: 'packages/yambms/yambms_canbus.yaml' # yambms_canbus_web_server.yaml vars: - canbus_id: '1' # Must be a number + canbus_id: '1' # must be a number canbus_name: 'CANBUS 1' canbus_node_id: 'canbus_inverter_1' # CAN bus node to which your inverter is connected - canbus_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable - # The CANBUS link will be considered down if no response from the inverter (ID 0x305) for 5s - # The Deye inverter sends the ACK (can_id 0x305) only when it receives the can_id 0x356 + canbus_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable + # The CAN bus link will be paused for `30s` if the inverter does not respond with an ACK (can_id 0x305) + # before the end of the `canbus_link_timer` (5s by default). canbus_link_timer: '5s' + canbus_extended_ack: 'false' # Set to 'true' for enable extended 29-bit IDs (required for Schneider XW Pro) @@ -370,7 +372,7 @@ packages: # rs485_uart_id: 'uart_esp_3' # UART interface to which your inverter is connected # rs485_uart_baud_rate: '9600' # rs485_update_timeout: '5s' - # rs485_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable + # rs485_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable diff --git a/YamBMS_RP_BMS_JK_BLE.yaml b/YamBMS_RP_BMS_JK_BLE.yaml index 8015aef..932efc9 100644 --- a/YamBMS_RP_BMS_JK_BLE.yaml +++ b/YamBMS_RP_BMS_JK_BLE.yaml @@ -1,4 +1,4 @@ -# Updated : 2026.02.05 +# Updated : 2026.02.16 # Version : 1.7.0 # GitHub : https://github.com/Sleeper85/esphome-yambms @@ -174,6 +174,7 @@ packages: # - path: 'packages/board/board_ESP32-C3_DevKitM-1.yaml' # - path: 'packages/board/board_ESP32-C3_ETH01-EVO.yaml' # - path: 'packages/board/board_ESP32-C3_FlipC3.yaml' + # - path: 'packages/board/board_ESP32-S3_Generic.yaml' # - path: 'packages/board/board_ESP32-S3_AtomS3-Lite.yaml' # - path: 'packages/board/board_ESP32-S3_AtomS3.yaml' # - path: 'packages/board/board_ESP32-S3_AtomS3R.yaml' @@ -275,7 +276,7 @@ packages: # Maximum cell charging cycles is used to calculate the battey SoH. # MB31=8000.0, LF280K v3=8000.0, LF280K v2=6000.0, LF280=3000.0 (decimal is required) bms_cell_max_cycles: '6000.0' - bms_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable + bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable # BMS 2 - path: 'packages/bms/bms_combine_JK_BLE_standard.yaml' vars: @@ -286,7 +287,7 @@ packages: # Maximum cell charging cycles is used to calculate the battey SoH. # MB31=8000.0, LF280K v3=8000.0, LF280K v2=6000.0, LF280=3000.0 (decimal is required) bms_cell_max_cycles: '6000.0' - bms_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable + bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable @@ -304,13 +305,14 @@ packages: - path: 'packages/yambms/yambms_canbus.yaml' # yambms_canbus_web_server.yaml vars: - canbus_id: '1' # Must be a number + canbus_id: '1' # must be a number canbus_name: 'CANBUS 1' canbus_node_id: 'canbus_inverter_1' # CAN bus node to which your inverter is connected - canbus_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable - # The CANBUS link will be considered down if no response from the inverter (ID 0x305) for 5s - # The Deye inverter sends the ACK (can_id 0x305) only when it receives the can_id 0x356 + canbus_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable + # The CAN bus link will be paused for `30s` if the inverter does not respond with an ACK (can_id 0x305) + # before the end of the `canbus_link_timer` (5s by default). canbus_link_timer: '5s' + canbus_extended_ack: 'false' # Set to 'true' for enable extended 29-bit IDs (required for Schneider XW Pro) @@ -325,7 +327,7 @@ packages: # rs485_uart_id: 'uart_esp_3' # UART interface to which your inverter is connected # rs485_uart_baud_rate: '9600' # rs485_update_timeout: '5s' - # rs485_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable + # rs485_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable diff --git a/YamBMS_RP_BMS_JK_UART_4G-GPS.yaml b/YamBMS_RP_BMS_JK_UART_4G-GPS.yaml index 43174b7..82166dd 100644 --- a/YamBMS_RP_BMS_JK_UART_4G-GPS.yaml +++ b/YamBMS_RP_BMS_JK_UART_4G-GPS.yaml @@ -1,4 +1,4 @@ -# Updated : 2026.02.05 +# Updated : 2026.02.16 # Version : 1.7.0 # GitHub : https://github.com/Sleeper85/esphome-yambms @@ -174,6 +174,7 @@ packages: # - path: 'packages/board/board_ESP32-C3_DevKitM-1.yaml' # - path: 'packages/board/board_ESP32-C3_ETH01-EVO.yaml' # - path: 'packages/board/board_ESP32-C3_FlipC3.yaml' + # - path: 'packages/board/board_ESP32-S3_Generic.yaml' # - path: 'packages/board/board_ESP32-S3_AtomS3-Lite.yaml' # - path: 'packages/board/board_ESP32-S3_AtomS3.yaml' # - path: 'packages/board/board_ESP32-S3_AtomS3R.yaml' @@ -274,7 +275,7 @@ packages: # Maximum cell charging cycles is used to calculate the battey SoH. # MB31=8000.0, LF280K v3=8000.0, LF280K v2=6000.0, LF280=3000.0 (decimal is required) bms_cell_max_cycles: '6000.0' - bms_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable + bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable # BMS 2 - path: 'packages/bms/bms_combine_JK_UART_4G-GPS_full.yaml' vars: @@ -284,7 +285,7 @@ packages: # Maximum cell charging cycles is used to calculate the battey SoH. # MB31=8000.0, LF280K v3=8000.0, LF280K v2=6000.0, LF280=3000.0 (decimal is required) bms_cell_max_cycles: '6000.0' - bms_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable + bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable @@ -302,13 +303,14 @@ packages: - path: 'packages/yambms/yambms_canbus.yaml' # yambms_canbus_web_server.yaml vars: - canbus_id: '1' # Must be a number + canbus_id: '1' # must be a number canbus_name: 'CANBUS 1' canbus_node_id: 'canbus_inverter_1' # CAN bus node to which your inverter is connected - canbus_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable - # The CANBUS link will be considered down if no response from the inverter (ID 0x305) for 5s - # The Deye inverter sends the ACK (can_id 0x305) only when it receives the can_id 0x356 + canbus_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable + # The CAN bus link will be paused for `30s` if the inverter does not respond with an ACK (can_id 0x305) + # before the end of the `canbus_link_timer` (5s by default). canbus_link_timer: '5s' + canbus_extended_ack: 'false' # Set to 'true' for enable extended 29-bit IDs (required for Schneider XW Pro) @@ -323,7 +325,7 @@ packages: # rs485_uart_id: 'uart_esp_3' # UART interface to which your inverter is connected # rs485_uart_baud_rate: '9600' # rs485_update_timeout: '5s' - # rs485_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable + # rs485_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable diff --git a/YamBMS_RP_BMS_PACE_RS485_Modbus.yaml b/YamBMS_RP_BMS_PACE_RS485_Modbus.yaml index 49613f7..9bc086b 100644 --- a/YamBMS_RP_BMS_PACE_RS485_Modbus.yaml +++ b/YamBMS_RP_BMS_PACE_RS485_Modbus.yaml @@ -1,4 +1,4 @@ -# Updated : 2026.02.05 +# Updated : 2026.02.16 # Version : 1.7.0 # GitHub : https://github.com/Sleeper85/esphome-yambms @@ -174,6 +174,7 @@ packages: # - path: 'packages/board/board_ESP32-C3_DevKitM-1.yaml' # - path: 'packages/board/board_ESP32-C3_ETH01-EVO.yaml' # - path: 'packages/board/board_ESP32-C3_FlipC3.yaml' + # - path: 'packages/board/board_ESP32-S3_Generic.yaml' # - path: 'packages/board/board_ESP32-S3_AtomS3-Lite.yaml' # - path: 'packages/board/board_ESP32-S3_AtomS3.yaml' # - path: 'packages/board/board_ESP32-S3_AtomS3R.yaml' @@ -275,13 +276,13 @@ packages: vars: bms_id: '1' # BMS id and modbus address bms_name: 'PACE-BMS 1' - bms_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable + bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable # BMS 2 - path: 'packages/bms/bms_combine_PACE_RS485_bms_full.yaml' vars: bms_id: '2' # BMS id and modbus address bms_name: 'PACE-BMS 2' - bms_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable + bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable @@ -299,13 +300,14 @@ packages: - path: 'packages/yambms/yambms_canbus.yaml' # yambms_canbus_web_server.yaml vars: - canbus_id: '1' # Must be a number + canbus_id: '1' # must be a number canbus_name: 'CANBUS 1' canbus_node_id: 'canbus_inverter_1' # CAN bus node to which your inverter is connected - canbus_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable - # The CANBUS link will be considered down if no response from the inverter (ID 0x305) for 5s - # The Deye inverter sends the ACK (can_id 0x305) only when it receives the can_id 0x356 + canbus_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable + # The CAN bus link will be paused for `30s` if the inverter does not respond with an ACK (can_id 0x305) + # before the end of the `canbus_link_timer` (5s by default). canbus_link_timer: '5s' + canbus_extended_ack: 'false' # Set to 'true' for enable extended 29-bit IDs (required for Schneider XW Pro) @@ -320,7 +322,7 @@ packages: # rs485_uart_id: 'uart_esp_3' # UART interface to which your inverter is connected # rs485_uart_baud_rate: '9600' # rs485_update_timeout: '5s' - # rs485_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable + # rs485_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable diff --git a/YamBMS_RP_BMS_SEPLOS_V1_V2_RS485_Modbus.yaml b/YamBMS_RP_BMS_SEPLOS_V1_V2_RS485_Modbus.yaml index c949158..183d3b1 100644 --- a/YamBMS_RP_BMS_SEPLOS_V1_V2_RS485_Modbus.yaml +++ b/YamBMS_RP_BMS_SEPLOS_V1_V2_RS485_Modbus.yaml @@ -1,4 +1,4 @@ -# Updated : 2026.02.05 +# Updated : 2026.02.16 # Version : 1.7.0 # GitHub : https://github.com/Sleeper85/esphome-yambms @@ -174,6 +174,7 @@ packages: # - path: 'packages/board/board_ESP32-C3_DevKitM-1.yaml' # - path: 'packages/board/board_ESP32-C3_ETH01-EVO.yaml' # - path: 'packages/board/board_ESP32-C3_FlipC3.yaml' + # - path: 'packages/board/board_ESP32-S3_Generic.yaml' # - path: 'packages/board/board_ESP32-S3_AtomS3-Lite.yaml' # - path: 'packages/board/board_ESP32-S3_AtomS3.yaml' # - path: 'packages/board/board_ESP32-S3_AtomS3R.yaml' @@ -285,7 +286,7 @@ packages: bms_cell_ovp: '3.650' # V. Used by 'Auto CCL' functions bms_cell_uvp: '2.800' # V. Used by 'Auto DCL' functions and to calculate maximum discharge voltage bms_balance_trigger_voltage: '0.010' # V. Used by 'Auto CVL' functions - bms_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable + bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable # BMS 2 - path: 'packages/bms/bms_combine_SEPLOS_V1_V2_RS485_bms_full.yaml' vars: @@ -301,7 +302,7 @@ packages: bms_cell_ovp: '3.650' # V. Used by 'Auto CCL' functions bms_cell_uvp: '2.800' # V. Used by 'Auto DCL' functions and to calculate maximum discharge voltage bms_balance_trigger_voltage: '0.010' # V. Used by 'Auto CVL' functions - bms_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable + bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable # BMS 3 - path: 'packages/bms/bms_combine_SEPLOS_V1_V2_RS485_bms_full.yaml' vars: @@ -317,7 +318,7 @@ packages: bms_cell_ovp: '3.650' # V. Used by 'Auto CCL' functions bms_cell_uvp: '2.800' # V. Used by 'Auto DCL' functions and to calculate maximum discharge voltage bms_balance_trigger_voltage: '0.010' # V. Used by 'Auto CVL' functions - bms_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable + bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable @@ -335,13 +336,14 @@ packages: - path: 'packages/yambms/yambms_canbus.yaml' # yambms_canbus_web_server.yaml vars: - canbus_id: '1' # Must be a number + canbus_id: '1' # must be a number canbus_name: 'CANBUS 1' canbus_node_id: 'canbus_inverter_1' # CAN bus node to which your inverter is connected - canbus_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable - # The CANBUS link will be considered down if no response from the inverter (ID 0x305) for 5s - # The Deye inverter sends the ACK (can_id 0x305) only when it receives the can_id 0x356 + canbus_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable + # The CAN bus link will be paused for `30s` if the inverter does not respond with an ACK (can_id 0x305) + # before the end of the `canbus_link_timer` (5s by default). canbus_link_timer: '5s' + canbus_extended_ack: 'false' # Set to 'true' for enable extended 29-bit IDs (required for Schneider XW Pro) @@ -356,7 +358,7 @@ packages: # rs485_uart_id: 'uart_esp_3' # UART interface to which your inverter is connected # rs485_uart_baud_rate: '9600' # rs485_update_timeout: '5s' - # rs485_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable + # rs485_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable diff --git a/YamBMS_RP_BMS_SEPLOS_V3_RS485_Modbus_sniffer.yaml b/YamBMS_RP_BMS_SEPLOS_V3_RS485_Modbus_sniffer.yaml index a82ff7c..97c1c65 100644 --- a/YamBMS_RP_BMS_SEPLOS_V3_RS485_Modbus_sniffer.yaml +++ b/YamBMS_RP_BMS_SEPLOS_V3_RS485_Modbus_sniffer.yaml @@ -1,4 +1,4 @@ -# Updated : 2026.02.05 +# Updated : 2026.02.16 # Version : 1.7.0 # GitHub : https://github.com/Sleeper85/esphome-yambms @@ -174,6 +174,7 @@ packages: # - path: 'packages/board/board_ESP32-C3_DevKitM-1.yaml' # - path: 'packages/board/board_ESP32-C3_ETH01-EVO.yaml' # - path: 'packages/board/board_ESP32-C3_FlipC3.yaml' + # - path: 'packages/board/board_ESP32-S3_Generic.yaml' # - path: 'packages/board/board_ESP32-S3_AtomS3-Lite.yaml' # - path: 'packages/board/board_ESP32-S3_AtomS3.yaml' # - path: 'packages/board/board_ESP32-S3_AtomS3R.yaml' @@ -273,44 +274,50 @@ packages: seplos_bms_count: '3' # Seplos V3 BMS count seplos_update_interval: '3' # # Time in seconds, update interval for all data points # BMS 1 - - path: 'packages/bms/bms_combine_SEPLOS_V3_RS485_sniffer_bms_full.yaml' + - path: 'packages/bms/bms_combine_SEPLOS_V3_RS485_bms_full.yaml' vars: bms_id: '1' bms_prefix: 'bms0' # DON'T CHANGE THIS NAME ! bms_name: 'SEPLOS-BMS 1' # Required settings cannot be retrieved from BMS # These values ​​must match your BMS settings + bms_max_charge_current: '100' # A. The maximum current your BMS can handle + bms_max_discharge_current: '100' # A. The maximum current your BMS can handle # LFP values example bms_cell_ovp: '3.650' # V. Used by 'Auto CCL' functions bms_cell_uvp: '2.800' # V. Used by 'Auto DCL' functions and to calculate maximum discharge voltage bms_balance_trigger_voltage: '0.010' # V. Used by 'Auto CVL' functions - bms_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable + bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable # BMS 2 - - path: 'packages/bms/bms_combine_SEPLOS_V3_RS485_sniffer_bms_full.yaml' + - path: 'packages/bms/bms_combine_SEPLOS_V3_RS485_bms_full.yaml' vars: bms_id: '2' bms_prefix: 'bms1' # DON'T CHANGE THIS NAME ! bms_name: 'SEPLOS-BMS 2' # Required settings cannot be retrieved from BMS + bms_max_charge_current: '100' # A. The maximum current your BMS can handle + bms_max_discharge_current: '100' # A. The maximum current your BMS can handle # These values ​​must match your BMS settings # LFP values example bms_cell_ovp: '3.650' # V. Used by 'Auto CCL' functions bms_cell_uvp: '2.800' # V. Used by 'Auto DCL' functions and to calculate maximum discharge voltage bms_balance_trigger_voltage: '0.010' # V. Used by 'Auto CVL' functions - bms_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable + bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable # BMS 3 - - path: 'packages/bms/bms_combine_SEPLOS_V3_RS485_sniffer_bms_full.yaml' + - path: 'packages/bms/bms_combine_SEPLOS_V3_RS485_bms_full.yaml' vars: bms_id: '3' bms_prefix: 'bms2' # DON'T CHANGE THIS NAME ! bms_name: 'SEPLOS-BMS 3' # Required settings cannot be retrieved from BMS + bms_max_charge_current: '100' # A. The maximum current your BMS can handle + bms_max_discharge_current: '100' # A. The maximum current your BMS can handle # These values ​​must match your BMS settings # LFP values example bms_cell_ovp: '3.650' # V. Used by 'Auto CCL' functions bms_cell_uvp: '2.800' # V. Used by 'Auto DCL' functions and to calculate maximum discharge voltage bms_balance_trigger_voltage: '0.010' # V. Used by 'Auto CVL' functions - bms_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable + bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable @@ -328,13 +335,14 @@ packages: - path: 'packages/yambms/yambms_canbus.yaml' # yambms_canbus_web_server.yaml vars: - canbus_id: '1' # Must be a number + canbus_id: '1' # must be a number canbus_name: 'CANBUS 1' canbus_node_id: 'canbus_inverter_1' # CAN bus node to which your inverter is connected - canbus_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable - # The CANBUS link will be considered down if no response from the inverter (ID 0x305) for 5s - # The Deye inverter sends the ACK (can_id 0x305) only when it receives the can_id 0x356 + canbus_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable + # The CAN bus link will be paused for `30s` if the inverter does not respond with an ACK (can_id 0x305) + # before the end of the `canbus_link_timer` (5s by default). canbus_link_timer: '5s' + canbus_extended_ack: 'false' # Set to 'true' for enable extended 29-bit IDs (required for Schneider XW Pro) @@ -349,7 +357,7 @@ packages: # rs485_uart_id: 'uart_esp_3' # UART interface to which your inverter is connected # rs485_uart_baud_rate: '9600' # rs485_update_timeout: '5s' - # rs485_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable + # rs485_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable diff --git a/YamBMS_RP_Balancer.yaml b/YamBMS_RP_Balancer.yaml index cda4782..fea1137 100644 --- a/YamBMS_RP_Balancer.yaml +++ b/YamBMS_RP_Balancer.yaml @@ -1,4 +1,4 @@ -# Updated : 2026.02.05 +# Updated : 2026.02.16 # Version : 1.7.0 # GitHub : https://github.com/Sleeper85/esphome-yambms @@ -174,6 +174,7 @@ packages: # - path: 'packages/board/board_ESP32-C3_DevKitM-1.yaml' # - path: 'packages/board/board_ESP32-C3_ETH01-EVO.yaml' # - path: 'packages/board/board_ESP32-C3_FlipC3.yaml' + # - path: 'packages/board/board_ESP32-S3_Generic.yaml' # - path: 'packages/board/board_ESP32-S3_AtomS3-Lite.yaml' # - path: 'packages/board/board_ESP32-S3_AtomS3.yaml' # - path: 'packages/board/board_ESP32-S3_AtomS3R.yaml' @@ -277,14 +278,14 @@ packages: bms_id: '1' # must be a number bms_name: 'BASEN-BMS 1' bms_address: '0x01' - bms_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable + bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable # Basen module 2 - path: 'packages/bms/bms_combine_BASEN_RS485_full.yaml' vars: bms_id: '2' # must be a number bms_name: 'BASEN-BMS 2' bms_address: '0x02' - bms_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable + bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable # Balancer 1 linked to BMS 1 - path: 'packages/balancer/balancer_sensors_JK_NEEY_BLE.yaml' @@ -292,7 +293,7 @@ packages: bms_id: '1' # must match the BMS ID balancer_name: 'Balancer 1' balancer_ble_mac_address: 11:22:33:44:55:66 - balancer_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable + balancer_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable # Balancer 2 linked to BMS 2 - path: 'packages/balancer/balancer_sensors_JK_NEEY_BLE.yaml' vars: @@ -317,13 +318,14 @@ packages: - path: 'packages/yambms/yambms_canbus.yaml' # yambms_canbus_web_server.yaml vars: - canbus_id: '1' # Must be a number + canbus_id: '1' # must be a number canbus_name: 'CANBUS 1' canbus_node_id: 'canbus_inverter_1' # CAN bus node to which your inverter is connected - canbus_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable - # The CANBUS link will be considered down if no response from the inverter (ID 0x305) for 5s - # The Deye inverter sends the ACK (can_id 0x305) only when it receives the can_id 0x356 + canbus_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable + # The CAN bus link will be paused for `30s` if the inverter does not respond with an ACK (can_id 0x305) + # before the end of the `canbus_link_timer` (5s by default). canbus_link_timer: '5s' + canbus_extended_ack: 'false' # Set to 'true' for enable extended 29-bit IDs (required for Schneider XW Pro) @@ -338,7 +340,7 @@ packages: # rs485_uart_id: 'uart_esp_3' # UART interface to which your inverter is connected # rs485_uart_baud_rate: '9600' # rs485_update_timeout: '5s' - # rs485_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable + # rs485_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable diff --git a/YamBMS_RP_DEMO.yaml b/YamBMS_RP_DEMO.yaml index 601e95d..b6e8120 100644 --- a/YamBMS_RP_DEMO.yaml +++ b/YamBMS_RP_DEMO.yaml @@ -1,4 +1,4 @@ -# Updated : 2026.02.05 +# Updated : 2026.02.16 # Version : 1.7.0 # GitHub : https://github.com/Sleeper85/esphome-yambms @@ -174,6 +174,7 @@ packages: # - path: 'packages/board/board_ESP32-C3_DevKitM-1.yaml' # - path: 'packages/board/board_ESP32-C3_ETH01-EVO.yaml' # - path: 'packages/board/board_ESP32-C3_FlipC3.yaml' + # - path: 'packages/board/board_ESP32-S3_Generic.yaml' # - path: 'packages/board/board_ESP32-S3_AtomS3-Lite.yaml' # - path: 'packages/board/board_ESP32-S3_AtomS3.yaml' # - path: 'packages/board/board_ESP32-S3_AtomS3R.yaml' @@ -292,7 +293,7 @@ packages: bms_cell_uvp: '2.800' # V Used by 'Auto DCL' functions and to calculate maximum discharge voltage bms_balance_trigger_voltage: '0.010' # V Used by 'Auto CVL' functions bms_charging_cycles: '178' # charging cycles number Used to calculate the SoH - bms_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable + bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable # BMS 2 - path: 'packages/bms/bms_combine_FAKE.yaml' vars: @@ -318,7 +319,7 @@ packages: bms_cell_uvp: '2.800' # V Used by 'Auto DCL' functions and to calculate maximum discharge voltage bms_balance_trigger_voltage: '0.010' # V Used by 'Auto CVL' functions bms_charging_cycles: '226' # charging cycles number Used to calculate the SoH - bms_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable + bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable # BMS 3 - path: 'packages/bms/bms_combine_FAKE.yaml' vars: @@ -344,7 +345,7 @@ packages: bms_cell_uvp: '2.800' # V Used by 'Auto DCL' functions and to calculate maximum discharge voltage bms_balance_trigger_voltage: '0.010' # V Used by 'Auto CVL' functions bms_charging_cycles: '194' # charging cycles number Used to calculate the SoH - bms_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable + bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable @@ -362,13 +363,14 @@ packages: - path: 'packages/yambms/yambms_canbus.yaml' # yambms_canbus_web_server.yaml vars: - canbus_id: '1' # Must be a number + canbus_id: '1' # must be a number canbus_name: 'CANBUS 1' canbus_node_id: 'canbus_inverter_1' # CAN bus node to which your inverter is connected - canbus_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable - # The CANBUS link will be considered down if no response from the inverter (ID 0x305) for 5s - # The Deye inverter sends the ACK (can_id 0x305) only when it receives the can_id 0x356 + canbus_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable + # The CAN bus link will be paused for `30s` if the inverter does not respond with an ACK (can_id 0x305) + # before the end of the `canbus_link_timer` (5s by default). canbus_link_timer: '5s' + canbus_extended_ack: 'false' # Set to 'true' for enable extended 29-bit IDs (required for Schneider XW Pro) @@ -383,7 +385,7 @@ packages: # rs485_uart_id: 'uart_esp_3' # UART interface to which your inverter is connected # rs485_uart_baud_rate: '9600' # rs485_update_timeout: '5s' - # rs485_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable + # rs485_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable diff --git a/YamBMS_RP_Ethernet_board.yaml b/YamBMS_RP_Ethernet_board.yaml index a1175d7..e9d818e 100644 --- a/YamBMS_RP_Ethernet_board.yaml +++ b/YamBMS_RP_Ethernet_board.yaml @@ -1,4 +1,4 @@ -# Updated : 2026.02.05 +# Updated : 2026.02.16 # Version : 1.7.0 # GitHub : https://github.com/Sleeper85/esphome-yambms @@ -249,13 +249,14 @@ packages: - path: 'packages/yambms/yambms_canbus.yaml' # yambms_canbus_web_server.yaml vars: - canbus_id: '1' # Must be a number + canbus_id: '1' # must be a number canbus_name: 'CANBUS 1' canbus_node_id: 'canbus_inverter_1' # CAN bus node to which your inverter is connected - canbus_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable - # The CANBUS link will be considered down if no response from the inverter (ID 0x305) for 5s - # The Deye inverter sends the ACK (can_id 0x305) only when it receives the can_id 0x356 + canbus_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable + # The CAN bus link will be paused for `30s` if the inverter does not respond with an ACK (can_id 0x305) + # before the end of the `canbus_link_timer` (5s by default). canbus_link_timer: '5s' + canbus_extended_ack: 'false' # Set to 'true' for enable extended 29-bit IDs (required for Schneider XW Pro) @@ -270,7 +271,7 @@ packages: # rs485_uart_id: 'uart_esp_3' # UART interface to which your inverter is connected # rs485_uart_baud_rate: '9600' # rs485_update_timeout: '5s' - # rs485_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable + # rs485_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable diff --git a/YamBMS_RP_PVbrain2.yaml b/YamBMS_RP_PVbrain2.yaml index bed7b0c..9ca1b4d 100644 --- a/YamBMS_RP_PVbrain2.yaml +++ b/YamBMS_RP_PVbrain2.yaml @@ -1,4 +1,4 @@ -# Updated : 2026.02.05 +# Updated : 2026.02.16 # Version : 1.7.0 # GitHub : https://github.com/Sleeper85/esphome-yambms @@ -260,13 +260,14 @@ packages: - path: 'packages/yambms/yambms_canbus.yaml' # yambms_canbus_web_server.yaml vars: - canbus_id: '1' # Must be a number + canbus_id: '1' # must be a number canbus_name: 'CANBUS 1' canbus_node_id: 'canbus_inverter_1' # CAN bus node to which your inverter is connected - canbus_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable - # The CANBUS link will be considered down if no response from the inverter (ID 0x305) for 5s - # The Deye inverter sends the ACK (can_id 0x305) only when it receives the can_id 0x356 + canbus_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable + # The CAN bus link will be paused for `30s` if the inverter does not respond with an ACK (can_id 0x305) + # before the end of the `canbus_link_timer` (5s by default). canbus_link_timer: '5s' + canbus_extended_ack: 'false' # Set to 'true' for enable extended 29-bit IDs (required for Schneider XW Pro) @@ -281,7 +282,7 @@ packages: # rs485_uart_id: 'uart_esp_3' # UART interface to which your inverter is connected # rs485_uart_baud_rate: '9600' # rs485_update_timeout: '5s' - # rs485_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable + # rs485_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable diff --git a/YamBMS_RP_RPi_Pico_Shunts_modbus_server.yaml b/YamBMS_RP_RPi_Pico_Shunts_modbus_server.yaml index bd38cbd..6699d3e 100644 --- a/YamBMS_RP_RPi_Pico_Shunts_modbus_server.yaml +++ b/YamBMS_RP_RPi_Pico_Shunts_modbus_server.yaml @@ -1,4 +1,4 @@ -# Updated : 2026.02.05 +# Updated : 2026.02.16 # Version : 1.7.0 # GitHub : https://github.com/Sleeper85/esphome-yambms @@ -89,32 +89,32 @@ packages: shunt_id: '1' shunt_name: 'Shunt 1' shunt_uart_id: 'uart_2' - shunt_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable + shunt_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable # shunt2 - path: packages/shunt/shunt_modbus_Victron_SmartShunt_UART_minimal.yaml vars: shunt_id: '2' shunt_name: 'Shunt 2' shunt_uart_id: 'uart_3' - shunt_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable + shunt_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable # shunt3 - path: packages/shunt/shunt_modbus_Victron_SmartShunt_UART_minimal.yaml vars: shunt_id: '3' shunt_name: 'Shunt 3' shunt_uart_id: 'uart_4' - shunt_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable + shunt_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable # shunt4 - path: packages/shunt/shunt_modbus_Victron_SmartShunt_UART_minimal.yaml vars: shunt_id: '4' shunt_name: 'Shunt 4' shunt_uart_id: 'uart_5' - shunt_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable + shunt_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable # shunt5 - path: packages/shunt/shunt_modbus_Victron_SmartShunt_UART_minimal.yaml vars: shunt_id: '5' shunt_name: 'Shunt 5' shunt_uart_id: 'uart_6' - shunt_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable + shunt_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable diff --git a/YamBMS_Remote_Packages_example.yaml b/YamBMS_Remote_Packages_example.yaml index c65761e..04e45ff 100644 --- a/YamBMS_Remote_Packages_example.yaml +++ b/YamBMS_Remote_Packages_example.yaml @@ -1,4 +1,4 @@ -# Updated : 2026.02.05 +# Updated : 2026.02.16 # Version : 1.7.0 # GitHub : https://github.com/Sleeper85/esphome-yambms @@ -174,6 +174,7 @@ packages: # - path: 'packages/board/board_ESP32-C3_DevKitM-1.yaml' # - path: 'packages/board/board_ESP32-C3_ETH01-EVO.yaml' # - path: 'packages/board/board_ESP32-C3_FlipC3.yaml' + # - path: 'packages/board/board_ESP32-S3_Generic.yaml' # - path: 'packages/board/board_ESP32-S3_AtomS3-Lite.yaml' # - path: 'packages/board/board_ESP32-S3_AtomS3.yaml' # - path: 'packages/board/board_ESP32-S3_AtomS3R.yaml' @@ -279,13 +280,14 @@ packages: - path: 'packages/yambms/yambms_canbus.yaml' # yambms_canbus_web_server.yaml vars: - canbus_id: '1' # Must be a number + canbus_id: '1' # must be a number canbus_name: 'CANBUS 1' canbus_node_id: 'canbus_inverter_1' # CAN bus node to which your inverter is connected - canbus_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable - # The CANBUS link will be considered down if no response from the inverter (ID 0x305) for 5s - # The Deye inverter sends the ACK (can_id 0x305) only when it receives the can_id 0x356 + canbus_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable + # The CAN bus link will be paused for `30s` if the inverter does not respond with an ACK (can_id 0x305) + # before the end of the `canbus_link_timer` (5s by default). canbus_link_timer: '5s' + canbus_extended_ack: 'false' # Set to 'true' for enable extended 29-bit IDs (required for Schneider XW Pro) @@ -300,7 +302,7 @@ packages: # rs485_uart_id: 'uart_esp_3' # UART interface to which your inverter is connected # rs485_uart_baud_rate: '9600' # rs485_update_timeout: '5s' - # rs485_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable + # rs485_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable # +------------------------------------------------------------------------------+ diff --git a/YamBMS_Remote_Packages_example_dev_branch.yaml b/YamBMS_Remote_Packages_example_dev_branch.yaml index ee33067..eb2268a 100644 --- a/YamBMS_Remote_Packages_example_dev_branch.yaml +++ b/YamBMS_Remote_Packages_example_dev_branch.yaml @@ -1,4 +1,4 @@ -# Updated : 2026.02.05 +# Updated : 2026.02.16 # Version : 1.7.0 # GitHub : https://github.com/Sleeper85/esphome-yambms @@ -174,6 +174,7 @@ packages: # - path: 'packages/board/board_ESP32-C3_DevKitM-1.yaml' # - path: 'packages/board/board_ESP32-C3_ETH01-EVO.yaml' # - path: 'packages/board/board_ESP32-C3_FlipC3.yaml' + # - path: 'packages/board/board_ESP32-S3_Generic.yaml' # - path: 'packages/board/board_ESP32-S3_AtomS3-Lite.yaml' # - path: 'packages/board/board_ESP32-S3_AtomS3.yaml' # - path: 'packages/board/board_ESP32-S3_AtomS3R.yaml' @@ -279,13 +280,14 @@ packages: - path: 'packages/yambms/yambms_canbus.yaml' # yambms_canbus_web_server.yaml vars: - canbus_id: '1' # Must be a number + canbus_id: '1' # must be a number canbus_name: 'CANBUS 1' canbus_node_id: 'canbus_inverter_1' # CAN bus node to which your inverter is connected - canbus_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable - # The CANBUS link will be considered down if no response from the inverter (ID 0x305) for 5s - # The Deye inverter sends the ACK (can_id 0x305) only when it receives the can_id 0x356 + canbus_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable + # The CAN bus link will be paused for `30s` if the inverter does not respond with an ACK (can_id 0x305) + # before the end of the `canbus_link_timer` (5s by default). canbus_link_timer: '5s' + canbus_extended_ack: 'false' # Set to 'true' for enable extended 29-bit IDs (required for Schneider XW Pro) @@ -300,7 +302,7 @@ packages: # rs485_uart_id: 'uart_esp_3' # UART interface to which your inverter is connected # rs485_uart_baud_rate: '9600' # rs485_update_timeout: '5s' - # rs485_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable + # rs485_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable # +------------------------------------------------------------------------------+ diff --git a/examples/single-node/LP_BMS_example_BASEN_RS485.yaml b/examples/single-node/LP_BMS_example_BASEN_RS485.yaml index bb6e9b0..2f40564 100644 --- a/examples/single-node/LP_BMS_example_BASEN_RS485.yaml +++ b/examples/single-node/LP_BMS_example_BASEN_RS485.yaml @@ -1,4 +1,4 @@ -# Updated : 2026.02.15 +# Updated : 2026.02.16 # Version : 1.1.3 # GitHub : https://github.com/Sleeper85/esphome-yambms @@ -41,7 +41,7 @@ packages: bms_id: '1' # must be a number bms_name: 'BASEN-BMS 1' bms_address: '0x01' - bms_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable + bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable # Basen module 2 bms2: !include @@ -50,4 +50,4 @@ packages: bms_id: '2' # must be a number bms_name: 'BASEN-BMS 2' bms_address: '0x02' - bms_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable + bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable diff --git a/examples/single-node/LP_BMS_example_DEMO_Shunt_and_BMS.yaml b/examples/single-node/LP_BMS_example_DEMO_Shunt_and_BMS.yaml index dc3071f..1fa8049 100644 --- a/examples/single-node/LP_BMS_example_DEMO_Shunt_and_BMS.yaml +++ b/examples/single-node/LP_BMS_example_DEMO_Shunt_and_BMS.yaml @@ -1,4 +1,4 @@ -# Updated : 2026.02.15 +# Updated : 2026.02.16 # Version : 1.1.4 # GitHub : https://github.com/Sleeper85/esphome-yambms @@ -36,7 +36,7 @@ packages: shunt_current: '17.5' # A shunt_power: '924' # W shunt_soc: '50' # % - shunt_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable + shunt_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable bms1: !include file: packages/bms/bms_combine_DEMO.yaml @@ -58,7 +58,7 @@ packages: bms_cell_uvp: '2.800' # V Used by 'Auto DCL' functions and to calculate maximum discharge voltage bms_balance_trigger_voltage: '0.010' # V Used by 'Auto CVL' functions bms_charging_cycles: '178' # charging cycles number Used to calculate the SoH - bms_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable + bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable bms2: !include file: packages/bms/bms_combine_DEMO.yaml @@ -80,7 +80,7 @@ packages: bms_cell_uvp: '2.800' # V Used by 'Auto DCL' functions and to calculate maximum discharge voltage bms_balance_trigger_voltage: '0.010' # V Used by 'Auto CVL' functions bms_charging_cycles: '226' # charging cycles number Used to calculate the SoH - bms_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable + bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable bms3: !include file: packages/bms/bms_combine_DEMO.yaml @@ -102,4 +102,4 @@ packages: bms_cell_uvp: '2.800' # V Used by 'Auto DCL' functions and to calculate maximum discharge voltage bms_balance_trigger_voltage: '0.010' # V Used by 'Auto CVL' functions bms_charging_cycles: '194' # charging cycles number Used to calculate the SoH - bms_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable + bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable diff --git a/examples/single-node/LP_BMS_example_DEYE_CAN.yaml b/examples/single-node/LP_BMS_example_DEYE_CAN.yaml index 2faa59b..6817cee 100644 --- a/examples/single-node/LP_BMS_example_DEYE_CAN.yaml +++ b/examples/single-node/LP_BMS_example_DEYE_CAN.yaml @@ -1,4 +1,4 @@ -# Updated : 2026.02.15 +# Updated : 2026.02.16 # Version : 1.1.3 # GitHub : https://github.com/Sleeper85/esphome-yambms @@ -46,7 +46,7 @@ packages: bms_name: 'DEYE-BMS 1' deye_id: '1' deye_module_id: '0' # Modules are numbered with 0-9 - bms_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable + bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable # Deye module 2 bms2: !include @@ -59,4 +59,4 @@ packages: bms_id: '2' # must be a number bms_name: 'DEYE-BMS 2' deye_module_id: '1' # Modules are numbered with 0-9 - bms_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable + bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable diff --git a/examples/single-node/LP_BMS_example_EG4_LLV2_RS485_Modbus.yaml b/examples/single-node/LP_BMS_example_EG4_LLV2_RS485_Modbus.yaml index 479b028..b23d152 100644 --- a/examples/single-node/LP_BMS_example_EG4_LLV2_RS485_Modbus.yaml +++ b/examples/single-node/LP_BMS_example_EG4_LLV2_RS485_Modbus.yaml @@ -1,4 +1,4 @@ -# Updated : 2026.02.15 +# Updated : 2026.02.16 # Version : 1.1.4 # GitHub : https://github.com/Sleeper85/esphome-yambms @@ -39,7 +39,7 @@ packages: bms_name: 'EG4-BMS 1' ## BMS address must start at 2 with EG4 LLV2, ID 1 is a special case and has different output. bms_address: 2 # BMS 1 modbus address - bms_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable + bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable bms2: !include file: packages/bms/bms_combine_EG4_LLV2_RS485_bms_full.yaml @@ -47,7 +47,7 @@ packages: bms_id: '2' # must be a number bms_name: 'EG4-BMS 2' bms_address: 3 # BMS 2 modbus address - bms_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable + bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable bms3: !include file: packages/bms/bms_combine_EG4_LLV2_RS485_bms_full.yaml @@ -55,4 +55,4 @@ packages: bms_id: '3' # must be a number bms_name: 'EG4-BMS 3' bms_address: 4 # BMS 3 modbus address - bms_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable + bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable diff --git a/examples/single-node/LP_BMS_example_Ecoworthy_RS485.yaml b/examples/single-node/LP_BMS_example_Ecoworthy_RS485.yaml index 0d8922c..3ae05b6 100644 --- a/examples/single-node/LP_BMS_example_Ecoworthy_RS485.yaml +++ b/examples/single-node/LP_BMS_example_Ecoworthy_RS485.yaml @@ -1,4 +1,4 @@ -# Updated : 2026.02.15 +# Updated : 2026.02.16 # Version : 1.1.1 # GitHub : https://github.com/Sleeper85/esphome-yambms @@ -52,7 +52,7 @@ packages: bms_address: '0x01' # BMS 1 modbus address (usually 0x01 for primary) bms_battery_count: '3' # total batteries polled (1=primary only, 2+=primary+secondaries) bms_cell_max_cycles: '6000.0' - bms_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable + bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable # Secondary battery 2 (BMS 2) - data polled by primary bms2: !include diff --git a/examples/single-node/LP_BMS_example_JBD_UART_BLE.yaml b/examples/single-node/LP_BMS_example_JBD_UART_BLE.yaml index 9421a94..aee0c65 100644 --- a/examples/single-node/LP_BMS_example_JBD_UART_BLE.yaml +++ b/examples/single-node/LP_BMS_example_JBD_UART_BLE.yaml @@ -1,4 +1,4 @@ -# Updated : 2026.02.15 +# Updated : 2026.02.16 # Version : 1.1.4 # GitHub : https://github.com/Sleeper85/esphome-yambms @@ -44,7 +44,7 @@ packages: # Maximum cell charging cycles is used to calculate the battey SoH. # MB31=8000.0, LF280K v3=8000.0, LF280K v2=6000.0, LF280=3000.0 (decimal is required) bms_cell_max_cycles: '6000.0' - bms_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable + bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable bms2: !include file: packages/bms/bms_combine_JBD_BLE_full.yaml @@ -63,4 +63,4 @@ packages: # Maximum cell charging cycles is used to calculate the battey SoH. # MB31=8000.0, LF280K v3=8000.0, LF280K v2=6000.0, LF280=3000.0 (decimal is required) bms_cell_max_cycles: '6000.0' - bms_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable + bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable diff --git a/examples/single-node/LP_BMS_example_JK-B_RS485_Modbus_mode2.yaml b/examples/single-node/LP_BMS_example_JK-B_RS485_Modbus_mode2.yaml index ad708dd..d930152 100644 --- a/examples/single-node/LP_BMS_example_JK-B_RS485_Modbus_mode2.yaml +++ b/examples/single-node/LP_BMS_example_JK-B_RS485_Modbus_mode2.yaml @@ -1,4 +1,4 @@ -# Updated : 2026.02.15 +# Updated : 2026.02.16 # Version : 1.1.5 # GitHub : https://github.com/Sleeper85/esphome-yambms @@ -50,7 +50,7 @@ packages: bms_id: '1' # must be a number bms_name: 'JK-BMS 1' bms_address: '0x01' # BMS 1 DIP switch - bms_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable + bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable bms2: !include file: packages/bms/bms_combine_JK_RS485_Modbus_JK-B_standard.yaml @@ -58,7 +58,7 @@ packages: bms_id: '2' # must be a number bms_name: 'JK-BMS 2' bms_address: '0x02' # BMS 2 DIP switch - bms_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable + bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable bms3: !include file: packages/bms/bms_combine_JK_RS485_Modbus_JK-B_standard.yaml @@ -66,7 +66,7 @@ packages: bms_id: '3' # must be a number bms_name: 'JK-BMS 3' bms_address: '0x03' # BMS 3 DIP switch - bms_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable + bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable bms4: !include file: packages/bms/bms_combine_JK_RS485_Modbus_JK-B_standard.yaml @@ -74,7 +74,7 @@ packages: bms_id: '4' # must be a number bms_name: 'JK-BMS 4' bms_address: '0x04' # BMS 4 DIP switch - bms_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable + bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable bms5: !include file: packages/bms/bms_combine_JK_RS485_Modbus_JK-B_standard.yaml @@ -82,7 +82,7 @@ packages: bms_id: '5' # must be a number bms_name: 'JK-BMS 5' bms_address: '0x05' # BMS 5 DIP switch - bms_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable + bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable bms6: !include file: packages/bms/bms_combine_JK_RS485_Modbus_JK-B_standard.yaml @@ -90,7 +90,7 @@ packages: bms_id: '6' # must be a number bms_name: 'JK-BMS 6' bms_address: '0x06' # BMS 6 DIP switch - bms_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable + bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable bms7: !include file: packages/bms/bms_combine_JK_RS485_Modbus_JK-B_standard.yaml @@ -98,7 +98,7 @@ packages: bms_id: '7' # must be a number bms_name: 'JK-BMS 7' bms_address: '0x07' # BMS 7 DIP switch - bms_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable + bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable bms8: !include file: packages/bms/bms_combine_JK_RS485_Modbus_JK-B_standard.yaml @@ -106,4 +106,4 @@ packages: bms_id: '8' # must be a number bms_name: 'JK-BMS 8' bms_address: '0x08' # BMS 8 DIP switch - bms_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable + bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable diff --git a/examples/single-node/LP_BMS_example_JK-PB_RS485_Modbus_mode1.yaml b/examples/single-node/LP_BMS_example_JK-PB_RS485_Modbus_mode1.yaml index e722687..3d8510f 100644 --- a/examples/single-node/LP_BMS_example_JK-PB_RS485_Modbus_mode1.yaml +++ b/examples/single-node/LP_BMS_example_JK-PB_RS485_Modbus_mode1.yaml @@ -1,4 +1,4 @@ -# Updated : 2026.02.15 +# Updated : 2026.02.16 # Version : 1.1.5 # GitHub : https://github.com/Sleeper85/esphome-yambms @@ -50,7 +50,7 @@ packages: bms_id: '1' # must be a number bms_name: 'JK-BMS 1' bms_address: '0x00' # BMS 1 DIP switch - bms_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable + bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable bms2: !include file: packages/bms/bms_combine_JK_RS485_Modbus_bms_full.yaml @@ -58,7 +58,7 @@ packages: bms_id: '2' # must be a number bms_name: 'JK-BMS 2' bms_address: '0x01' # BMS 2 DIP switch - bms_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable + bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable bms3: !include file: packages/bms/bms_combine_JK_RS485_Modbus_bms_full.yaml @@ -66,7 +66,7 @@ packages: bms_id: '3' # must be a number bms_name: 'JK-BMS 3' bms_address: '0x02' # BMS 3 DIP switch - bms_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable + bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable bms4: !include file: packages/bms/bms_combine_JK_RS485_Modbus_bms_full.yaml @@ -74,7 +74,7 @@ packages: bms_id: '4' # must be a number bms_name: 'JK-BMS 4' bms_address: '0x03' # BMS 4 DIP switch - bms_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable + bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable bms5: !include file: packages/bms/bms_combine_JK_RS485_Modbus_bms_full.yaml @@ -82,7 +82,7 @@ packages: bms_id: '5' # must be a number bms_name: 'JK-BMS 5' bms_address: '0x04' # BMS 5 DIP switch - bms_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable + bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable bms6: !include file: packages/bms/bms_combine_JK_RS485_Modbus_bms_full.yaml @@ -90,7 +90,7 @@ packages: bms_id: '6' # must be a number bms_name: 'JK-BMS 6' bms_address: '0x05' # BMS 6 DIP switch - bms_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable + bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable bms7: !include file: packages/bms/bms_combine_JK_RS485_Modbus_bms_full.yaml @@ -98,4 +98,4 @@ packages: bms_id: '7' # must be a number bms_name: 'JK-BMS 7' bms_address: '0x06' # BMS 7 DIP switch - bms_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable + bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable diff --git a/examples/single-node/LP_BMS_example_JK-PB_RS485_Modbus_mode2.yaml b/examples/single-node/LP_BMS_example_JK-PB_RS485_Modbus_mode2.yaml index f99a329..4d39c2e 100644 --- a/examples/single-node/LP_BMS_example_JK-PB_RS485_Modbus_mode2.yaml +++ b/examples/single-node/LP_BMS_example_JK-PB_RS485_Modbus_mode2.yaml @@ -1,4 +1,4 @@ -# Updated : 2026.02.15 +# Updated : 2026.02.16 # Version : 1.1.5 # GitHub : https://github.com/Sleeper85/esphome-yambms @@ -50,7 +50,7 @@ packages: bms_id: '1' # must be a number bms_name: 'JK-BMS 1' bms_address: '0x01' # BMS 1 DIP switch - bms_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable + bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable bms2: !include file: packages/bms/bms_combine_JK_RS485_Modbus_bms_standard.yaml @@ -58,7 +58,7 @@ packages: bms_id: '2' # must be a number bms_name: 'JK-BMS 2' bms_address: '0x02' # BMS 2 DIP switch - bms_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable + bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable bms3: !include file: packages/bms/bms_combine_JK_RS485_Modbus_bms_standard.yaml @@ -66,7 +66,7 @@ packages: bms_id: '3' # must be a number bms_name: 'JK-BMS 3' bms_address: '0x03' # BMS 3 DIP switch - bms_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable + bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable bms4: !include file: packages/bms/bms_combine_JK_RS485_Modbus_bms_standard.yaml @@ -74,7 +74,7 @@ packages: bms_id: '4' # must be a number bms_name: 'JK-BMS 4' bms_address: '0x04' # BMS 4 DIP switch - bms_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable + bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable bms5: !include file: packages/bms/bms_combine_JK_RS485_Modbus_bms_standard.yaml @@ -82,7 +82,7 @@ packages: bms_id: '5' # must be a number bms_name: 'JK-BMS 5' bms_address: '0x05' # BMS 5 DIP switch - bms_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable + bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable bms6: !include file: packages/bms/bms_combine_JK_RS485_Modbus_bms_standard.yaml @@ -90,7 +90,7 @@ packages: bms_id: '6' # must be a number bms_name: 'JK-BMS 6' bms_address: '0x06' # BMS 6 DIP switch - bms_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable + bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable bms7: !include file: packages/bms/bms_combine_JK_RS485_Modbus_bms_standard.yaml @@ -98,7 +98,7 @@ packages: bms_id: '7' # must be a number bms_name: 'JK-BMS 7' bms_address: '0x07' # BMS 7 DIP switch - bms_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable + bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable bms8: !include file: packages/bms/bms_combine_JK_RS485_Modbus_bms_standard.yaml @@ -106,4 +106,4 @@ packages: bms_id: '8' # must be a number bms_name: 'JK-BMS 8' bms_address: '0x08' # BMS 8 DIP switch - bms_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable + bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable diff --git a/examples/single-node/LP_BMS_example_JK_BLE.yaml b/examples/single-node/LP_BMS_example_JK_BLE.yaml index ace168f..c32456b 100644 --- a/examples/single-node/LP_BMS_example_JK_BLE.yaml +++ b/examples/single-node/LP_BMS_example_JK_BLE.yaml @@ -1,4 +1,4 @@ -# Updated : 2026.02.15 +# Updated : 2026.02.16 # Version : 1.1.3 # GitHub : https://github.com/Sleeper85/esphome-yambms @@ -36,7 +36,7 @@ packages: # Maximum cell charging cycles is used to calculate the battey SoH. # MB31=8000.0, LF280K v3=8000.0, LF280K v2=6000.0, LF280=3000.0 (decimal is required) bms_cell_max_cycles: '6000.0' - bms_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable + bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable bms2: !include file: packages/bms/bms_combine_JK_BLE_standard.yaml @@ -48,4 +48,4 @@ packages: # Maximum cell charging cycles is used to calculate the battey SoH. # MB31=8000.0, LF280K v3=8000.0, LF280K v2=6000.0, LF280=3000.0 (decimal is required) bms_cell_max_cycles: '6000.0' - bms_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable + bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable diff --git a/examples/single-node/LP_BMS_example_JK_UART_4G-GPS.yaml b/examples/single-node/LP_BMS_example_JK_UART_4G-GPS.yaml index 70d330c..efdc9a8 100644 --- a/examples/single-node/LP_BMS_example_JK_UART_4G-GPS.yaml +++ b/examples/single-node/LP_BMS_example_JK_UART_4G-GPS.yaml @@ -1,4 +1,4 @@ -# Updated : 2026.02.15 +# Updated : 2026.02.16 # Version : 1.1.3 # GitHub : https://github.com/Sleeper85/esphome-yambms @@ -35,7 +35,7 @@ packages: # Maximum cell charging cycles is used to calculate the battey SoH. # MB31=8000.0, LF280K v3=8000.0, LF280K v2=6000.0, LF280=3000.0 (decimal is required) bms_cell_max_cycles: '6000.0' - bms_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable + bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable bms2: !include file: packages/bms/bms_combine_JK_UART_4G-GPS_full.yaml @@ -46,4 +46,4 @@ packages: # Maximum cell charging cycles is used to calculate the battey SoH. # MB31=8000.0, LF280K v3=8000.0, LF280K v2=6000.0, LF280=3000.0 (decimal is required) bms_cell_max_cycles: '6000.0' - bms_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable + bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable diff --git a/examples/single-node/LP_BMS_example_PACE_RS485.yaml b/examples/single-node/LP_BMS_example_PACE_RS485.yaml index d05b446..bc519ff 100644 --- a/examples/single-node/LP_BMS_example_PACE_RS485.yaml +++ b/examples/single-node/LP_BMS_example_PACE_RS485.yaml @@ -1,4 +1,4 @@ -# Updated : 2026.02.15 +# Updated : 2026.02.16 # Version : 1.1.4 # GitHub : https://github.com/Sleeper85/esphome-yambms @@ -37,18 +37,18 @@ packages: vars: bms_id: '1' # BMS id and modbus address bms_name: 'PACE-BMS 1' - bms_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable + bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable bms2: !include file: packages/bms/bms_combine_PACE_RS485_bms_full.yaml vars: bms_id: '2' # BMS id and modbus address bms_name: 'PACE-BMS 2' - bms_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable + bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable bms3: !include file: packages/bms/bms_combine_PACE_RS485_bms_full.yaml vars: bms_id: '3' # BMS id and modbus address bms_name: 'PACE-BMS 3' - bms_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable + bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable diff --git a/examples/single-node/LP_BMS_example_SEPLOS_V1_V2_RS485.yaml b/examples/single-node/LP_BMS_example_SEPLOS_V1_V2_RS485.yaml index c0e9769..d68c5a7 100644 --- a/examples/single-node/LP_BMS_example_SEPLOS_V1_V2_RS485.yaml +++ b/examples/single-node/LP_BMS_example_SEPLOS_V1_V2_RS485.yaml @@ -1,4 +1,4 @@ -# Updated : 2026.02.15 +# Updated : 2026.02.16 # Version : 1.1.5 # GitHub : https://github.com/Sleeper85/esphome-yambms @@ -47,7 +47,7 @@ packages: bms_cell_ovp: '3.650' # V. Used by 'Auto CCL' functions bms_cell_uvp: '2.800' # V. Used by 'Auto DCL' functions and to calculate maximum discharge voltage bms_balance_trigger_voltage: '0.010' # V. Used by 'Auto CVL' functions - bms_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable + bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable bms2: !include file: packages/bms/bms_combine_SEPLOS_V1_V2_RS485_bms_full.yaml @@ -64,7 +64,7 @@ packages: bms_cell_ovp: '3.650' # V. Used by 'Auto CCL' functions bms_cell_uvp: '2.800' # V. Used by 'Auto DCL' functions and to calculate maximum discharge voltage bms_balance_trigger_voltage: '0.010' # V. Used by 'Auto CVL' functions - bms_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable + bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable bms3: !include file: packages/bms/bms_combine_SEPLOS_V1_V2_RS485_bms_full.yaml @@ -81,4 +81,4 @@ packages: bms_cell_ovp: '3.650' # V. Used by 'Auto CCL' functions bms_cell_uvp: '2.800' # V. Used by 'Auto DCL' functions and to calculate maximum discharge voltage bms_balance_trigger_voltage: '0.010' # V. Used by 'Auto CVL' functions - bms_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable + bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable diff --git a/examples/single-node/LP_BMS_example_SEPLOS_V3_RS485_sniffer.yaml b/examples/single-node/LP_BMS_example_SEPLOS_V3_RS485_sniffer.yaml index 1463d6d..bacd8cd 100644 --- a/examples/single-node/LP_BMS_example_SEPLOS_V3_RS485_sniffer.yaml +++ b/examples/single-node/LP_BMS_example_SEPLOS_V3_RS485_sniffer.yaml @@ -1,5 +1,5 @@ -# Updated : 2026.02.03 -# Version : 1.1.3 +# Updated : 2026.02.16 +# Version : 1.1.4 # GitHub : https://github.com/Sleeper85/esphome-yambms # YamBMS ( Yet another multi-BMS Merging Solution ) @@ -19,7 +19,8 @@ ############################ Local Packages Example ############################ -# This is not a working YAML but just code ready to copy into your main YAML. +# This is not a working YAML but just code ready to copy into +# your main YAML below the `packages:` section. ################################################################################ @@ -34,43 +35,49 @@ packages: seplos_update_interval: '3' # # Time in seconds, update interval for all data points bms1: !include - file: packages/bms/bms_combine_SEPLOS_V3_RS485_sniffer_bms_full.yaml + file: packages/bms/bms_combine_SEPLOS_V3_RS485_bms_full.yaml vars: bms_id: '1' bms_prefix: 'bms0' # DON'T CHANGE THIS NAME ! bms_name: 'SEPLOS-BMS 1' # Required settings cannot be retrieved from BMS # These values ​​must match your BMS settings + bms_max_charge_current: '100' # A. The maximum current your BMS can handle + bms_max_discharge_current: '100' # A. The maximum current your BMS can handle # LFP values example bms_cell_ovp: '3.650' # V. Used by 'Auto CCL' functions bms_cell_uvp: '2.800' # V. Used by 'Auto DCL' functions and to calculate maximum discharge voltage bms_balance_trigger_voltage: '0.010' # V. Used by 'Auto CVL' functions - bms_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable + bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable bms2: !include - file: packages/bms/bms_combine_SEPLOS_V3_RS485_sniffer_bms_full.yaml + file: packages/bms/bms_combine_SEPLOS_V3_RS485_bms_full.yaml vars: bms_id: '2' bms_prefix: 'bms1' # DON'T CHANGE THIS NAME ! bms_name: 'SEPLOS-BMS 2' # Required settings cannot be retrieved from BMS # These values ​​must match your BMS settings + bms_max_charge_current: '100' # A. The maximum current your BMS can handle + bms_max_discharge_current: '100' # A. The maximum current your BMS can handle # LFP values example bms_cell_ovp: '3.650' # V. Used by 'Auto CCL' functions bms_cell_uvp: '2.800' # V. Used by 'Auto DCL' functions and to calculate maximum discharge voltage bms_balance_trigger_voltage: '0.010' # V. Used by 'Auto CVL' functions - bms_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable + bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable bms3: !include - file: packages/bms/bms_combine_SEPLOS_V3_RS485_sniffer_bms_full.yaml + file: packages/bms/bms_combine_SEPLOS_V3_RS485_bms_full.yaml vars: bms_id: '3' bms_prefix: 'bms2' # DON'T CHANGE THIS NAME ! bms_name: 'SEPLOS-BMS 3' # Required settings cannot be retrieved from BMS # These values ​​must match your BMS settings + bms_max_charge_current: '100' # A. The maximum current your BMS can handle + bms_max_discharge_current: '100' # A. The maximum current your BMS can handle # LFP values example bms_cell_ovp: '3.650' # V. Used by 'Auto CCL' functions bms_cell_uvp: '2.800' # V. Used by 'Auto DCL' functions and to calculate maximum discharge voltage bms_balance_trigger_voltage: '0.010' # V. Used by 'Auto CVL' functions - bms_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable + bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable diff --git a/examples/single-node/LP_Balancer_example.yaml b/examples/single-node/LP_Balancer_example.yaml index 7a9500d..fa3ab45 100644 --- a/examples/single-node/LP_Balancer_example.yaml +++ b/examples/single-node/LP_Balancer_example.yaml @@ -1,5 +1,5 @@ -# Updated : 2026.02.15 -# Version : 1.1.1 +# Updated : 2026.02.16 +# Version : 1.1.2 # GitHub : https://github.com/Sleeper85/esphome-yambms # YamBMS ( Yet another multi-BMS Merging Solution ) @@ -41,6 +41,7 @@ packages: bms_id: '1' # must be a number bms_name: 'BASEN-BMS 1' bms_address: '0x01' + bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable # Basen module 2 bms2: !include @@ -49,6 +50,7 @@ packages: bms_id: '2' # must be a number bms_name: 'BASEN-BMS 2' bms_address: '0x02' + bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable # Balancer 1 linked to BMS 1 balancer1: !include @@ -57,6 +59,7 @@ packages: bms_id: '1' # must match the BMS ID balancer_name: 'Balancer 1' balancer_ble_mac_address: 11:22:33:44:55:66 + balancer_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable # Balancer 2 linked to BMS 2 balancer2: !include @@ -65,3 +68,4 @@ packages: bms_id: '2' # must match the BMS ID balancer_name: 'Balancer 2' balancer_ble_mac_address: 11:22:33:44:55:67 + balancer_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable diff --git a/examples/single-node/LP_Shunt_example.yaml b/examples/single-node/LP_Shunt_example.yaml index 1b3d3e5..0a1b2ad 100644 --- a/examples/single-node/LP_Shunt_example.yaml +++ b/examples/single-node/LP_Shunt_example.yaml @@ -1,4 +1,4 @@ -# Updated : 2026.02.15 +# Updated : 2026.02.16 # Version : 1.1.5 # GitHub : https://github.com/Sleeper85/esphome-yambms @@ -32,7 +32,7 @@ packages: shunt_id: '1' # must be a number shunt_name: 'Shunt 1' shunt_uart_id: 'uart_esp_1' - shunt_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable + shunt_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable # Optional: BMS IDs connected to this shunt # If provided, the shunt will only be used when all listed BMS are online # If not provided, the shunt will be used independently of the BMS online status @@ -44,7 +44,7 @@ packages: shunt_id: '1' # must be a number shunt_name: 'Shunt 1' shunt_uart_id: 'uart_esp_1' - shunt_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable + shunt_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable # Optional: BMS IDs connected to this shunt # If provided, the shunt will only be used when all listed BMS are online # If not provided, the shunt will be used independently of the BMS online status @@ -57,7 +57,7 @@ packages: shunt_name: 'Shunt 1' shunt_mac_address: '60:A4:23:91:8F:55' # Your MAC address shunt_encryption_key: '0df4d0395b7d1a876c0c33ecb9e70dcd' # Your encryption key - shunt_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable + shunt_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable # Optional: BMS IDs connected to this shunt # If provided, the shunt will only be used when all listed BMS are online # If not provided, the shunt will be used independently of the BMS online status diff --git a/examples/single-node/RP_BMS_example_BASEN_RS485.yaml b/examples/single-node/RP_BMS_example_BASEN_RS485.yaml index 6f38607..740d06e 100644 --- a/examples/single-node/RP_BMS_example_BASEN_RS485.yaml +++ b/examples/single-node/RP_BMS_example_BASEN_RS485.yaml @@ -1,4 +1,4 @@ -# Updated : 2026.02.15 +# Updated : 2026.02.16 # Version : 1.1.3 # GitHub : https://github.com/Sleeper85/esphome-yambms @@ -43,11 +43,11 @@ bms_id: '1' # must be a number bms_name: 'BASEN-BMS 1' bms_address: '0x01' - bms_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable + bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable # Basen module 2 - path: 'packages/bms/bms_combine_BASEN_RS485_full.yaml' vars: bms_id: '2' # must be a number bms_name: 'BASEN-BMS 2' bms_address: '0x02' - bms_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable + bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable diff --git a/examples/single-node/RP_BMS_example_DEMO_Shunt_and_BMS.yaml b/examples/single-node/RP_BMS_example_DEMO_Shunt_and_BMS.yaml index 013b151..a9de052 100644 --- a/examples/single-node/RP_BMS_example_DEMO_Shunt_and_BMS.yaml +++ b/examples/single-node/RP_BMS_example_DEMO_Shunt_and_BMS.yaml @@ -1,4 +1,4 @@ -# Updated : 2026.02.15 +# Updated : 2026.02.16 # Version : 1.1.4 # GitHub : https://github.com/Sleeper85/esphome-yambms @@ -62,7 +62,7 @@ bms_cell_uvp: '2.800' # V Used by 'Auto DCL' functions and to calculate maximum discharge voltage bms_balance_trigger_voltage: '0.010' # V Used by 'Auto CVL' functions bms_charging_cycles: '178' # charging cycles number Used to calculate the SoH - bms_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable + bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable # BMS 2 - path: 'packages/bms/bms_combine_DEMO.yaml' @@ -84,7 +84,7 @@ bms_cell_uvp: '2.800' # V Used by 'Auto DCL' functions and to calculate maximum discharge voltage bms_balance_trigger_voltage: '0.010' # V Used by 'Auto CVL' functions bms_charging_cycles: '226' # charging cycles number Used to calculate the SoH - bms_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable + bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable # BMS 3 - path: 'packages/bms/bms_combine_DEMO.yaml' @@ -106,4 +106,4 @@ bms_cell_uvp: '2.800' # V Used by 'Auto DCL' functions and to calculate maximum discharge voltage bms_balance_trigger_voltage: '0.010' # V Used by 'Auto CVL' functions bms_charging_cycles: '194' # charging cycles number Used to calculate the SoH - bms_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable + bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable diff --git a/examples/single-node/RP_BMS_example_DEYE_CAN.yaml b/examples/single-node/RP_BMS_example_DEYE_CAN.yaml index 70c7ddd..6ed6697 100644 --- a/examples/single-node/RP_BMS_example_DEYE_CAN.yaml +++ b/examples/single-node/RP_BMS_example_DEYE_CAN.yaml @@ -1,4 +1,4 @@ -# Updated : 2026.02.15 +# Updated : 2026.02.16 # Version : 1.1.3 # GitHub : https://github.com/Sleeper85/esphome-yambms @@ -48,7 +48,7 @@ bms_name: 'DEYE-BMS 1' deye_id: '1' deye_module_id: '0' # Modules are numbered with 0-9 - bms_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable + bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable # Deye module 2 - path: 'packages/bms/bms_combine_DEYE_CAN_module_full.yaml' vars: @@ -59,4 +59,4 @@ bms_id: '2' # must be a number bms_name: 'DEYE-BMS 2' deye_module_id: '1' # Modules are numbered with 0-9 - bms_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable + bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable diff --git a/examples/single-node/RP_BMS_example_EG4_LLV2_RS485_Modbus.yaml b/examples/single-node/RP_BMS_example_EG4_LLV2_RS485_Modbus.yaml index ab54e5e..53e0dfa 100644 --- a/examples/single-node/RP_BMS_example_EG4_LLV2_RS485_Modbus.yaml +++ b/examples/single-node/RP_BMS_example_EG4_LLV2_RS485_Modbus.yaml @@ -1,4 +1,4 @@ -# Updated : 2026.02.15 +# Updated : 2026.02.16 # Version : 1.1.4 # GitHub : https://github.com/Sleeper85/esphome-yambms @@ -43,18 +43,18 @@ bms_name: 'EG4-BMS 1' ## BMS address must start at 2 with EG4 LLV2, ID 1 is a special case and has different output. bms_address: 2 # BMS 1 modbus address - bms_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable + bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable # BMS 2 - path: 'packages/bms/bms_combine_EG4_LLV2_RS485_bms_full.yaml' vars: bms_id: '2' # must be a number bms_name: 'EG4-BMS 2' bms_address: 3 # BMS 2 modbus address - bms_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable + bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable # BMS 3 - path: 'packages/bms/bms_combine_EG4_LLV2_RS485_bms_full.yaml' vars: bms_id: '2' # must be a number bms_name: 'EG4-BMS 3' bms_address: 4 # BMS 3 modbus address - bms_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable + bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable diff --git a/examples/single-node/RP_BMS_example_Ecoworthy_RS485.yaml b/examples/single-node/RP_BMS_example_Ecoworthy_RS485.yaml index 662efd8..6025cc7 100644 --- a/examples/single-node/RP_BMS_example_Ecoworthy_RS485.yaml +++ b/examples/single-node/RP_BMS_example_Ecoworthy_RS485.yaml @@ -1,4 +1,4 @@ -# Updated : 2026.02.15 +# Updated : 2026.02.16 # Version : 1.1.1 # GitHub : https://github.com/Sleeper85/esphome-yambms @@ -54,7 +54,7 @@ bms_address: '0x01' # BMS 1 modbus address (usually 0x01 for primary) bms_battery_count: '3' # total batteries polled (1=primary only, 2+=primary+secondaries) bms_cell_max_cycles: '6000.0' - bms_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable + bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable # Secondary battery 2 (BMS 2) - data polled by primary - path: 'packages/bms/bms_combine_Ecoworthy_RS485_secondary.yaml' vars: diff --git a/examples/single-node/RP_BMS_example_JBD_UART_BLE.yaml b/examples/single-node/RP_BMS_example_JBD_UART_BLE.yaml index 3bdc159..26f3026 100644 --- a/examples/single-node/RP_BMS_example_JBD_UART_BLE.yaml +++ b/examples/single-node/RP_BMS_example_JBD_UART_BLE.yaml @@ -1,4 +1,4 @@ -# Updated : 2026.02.15 +# Updated : 2026.02.16 # Version : 1.1.4 # GitHub : https://github.com/Sleeper85/esphome-yambms @@ -49,7 +49,7 @@ # Maximum cell charging cycles is used to calculate the battey SoH. # MB31=8000.0, LF280K v3=8000.0, LF280K v2=6000.0, LF280=3000.0 (decimal is required) bms_cell_max_cycles: '6000.0' - bms_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable + bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable # BMS 2 - path: 'packages/bms/bms_combine_JBD_BLE_full.yaml' vars: @@ -67,4 +67,4 @@ # Maximum cell charging cycles is used to calculate the battey SoH. # MB31=8000.0, LF280K v3=8000.0, LF280K v2=6000.0, LF280=3000.0 (decimal is required) bms_cell_max_cycles: '6000.0' - bms_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable + bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable diff --git a/examples/single-node/RP_BMS_example_JK-B_RS485_Modbus_mode2.yaml b/examples/single-node/RP_BMS_example_JK-B_RS485_Modbus_mode2.yaml index 1244ec8..9310ede 100644 --- a/examples/single-node/RP_BMS_example_JK-B_RS485_Modbus_mode2.yaml +++ b/examples/single-node/RP_BMS_example_JK-B_RS485_Modbus_mode2.yaml @@ -1,4 +1,4 @@ -# Updated : 2026.02.15 +# Updated : 2026.02.16 # Version : 1.1.5 # GitHub : https://github.com/Sleeper85/esphome-yambms @@ -48,53 +48,53 @@ bms_id: '1' # must be a number bms_name: 'JK-BMS 1' bms_address: '0x01' # BMS 1 ( JK app `Device Addr.` setting ) - bms_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable + bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable # BMS 2 - path: 'packages/bms/bms_combine_JK_RS485_Modbus_JK-B_standard.yaml' vars: bms_id: '2' # must be a number bms_name: 'JK-BMS 2' bms_address: '0x02' # BMS 2 ( JK app `Device Addr.` setting ) - bms_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable + bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable # BMS 3 - path: 'packages/bms/bms_combine_JK_RS485_Modbus_JK-B_standard.yaml' vars: bms_id: '3' # must be a number bms_name: 'JK-BMS 3' bms_address: '0x03' # BMS 3 ( JK app `Device Addr.` setting ) - bms_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable + bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable # BMS 4 - path: 'packages/bms/bms_combine_JK_RS485_Modbus_JK-B_standard.yaml' vars: bms_id: '4' # must be a number bms_name: 'JK-BMS 4' bms_address: '0x04' # BMS 4 ( JK app `Device Addr.` setting ) - bms_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable + bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable # BMS 5 - path: 'packages/bms/bms_combine_JK_RS485_Modbus_JK-B_standard.yaml' vars: bms_id: '5' # must be a number bms_name: 'JK-BMS 5' bms_address: '0x05' # BMS 5 ( JK app `Device Addr.` setting ) - bms_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable + bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable # BMS 6 - path: 'packages/bms/bms_combine_JK_RS485_Modbus_JK-B_standard.yaml' vars: bms_id: '6' # must be a number bms_name: 'JK-BMS 6' bms_address: '0x06' # BMS 6 ( JK app `Device Addr.` setting ) - bms_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable + bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable # BMS 7 - path: 'packages/bms/bms_combine_JK_RS485_Modbus_JK-B_standard.yaml' vars: bms_id: '7' # must be a number bms_name: 'JK-BMS 7' bms_address: '0x07' # BMS 7 ( JK app `Device Addr.` setting ) - bms_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable + bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable # BMS 8 - path: 'packages/bms/bms_combine_JK_RS485_Modbus_JK-B_standard.yaml' vars: bms_id: '8' # must be a number bms_name: 'JK-BMS 8' bms_address: '0x08' # BMS 8 ( JK app `Device Addr.` setting ) - bms_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable + bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable diff --git a/examples/single-node/RP_BMS_example_JK-PB_RS485_Modbus_mode2.yaml b/examples/single-node/RP_BMS_example_JK-PB_RS485_Modbus_mode2.yaml index 3e6ce4c..02e197d 100644 --- a/examples/single-node/RP_BMS_example_JK-PB_RS485_Modbus_mode2.yaml +++ b/examples/single-node/RP_BMS_example_JK-PB_RS485_Modbus_mode2.yaml @@ -1,4 +1,4 @@ -# Updated : 2026.02.15 +# Updated : 2026.02.16 # Version : 1.1.5 # GitHub : https://github.com/Sleeper85/esphome-yambms @@ -48,53 +48,53 @@ bms_id: '1' # must be a number bms_name: 'JK-BMS 1' bms_address: '0x01' # BMS 1 DIP switch - bms_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable + bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable # BMS 2 - path: 'packages/bms/bms_combine_JK_RS485_Modbus_bms_standard.yaml' vars: bms_id: '2' # must be a number bms_name: 'JK-BMS 2' bms_address: '0x02' # BMS 2 DIP switch - bms_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable + bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable # BMS 3 - path: 'packages/bms/bms_combine_JK_RS485_Modbus_bms_standard.yaml' vars: bms_id: '3' # must be a number bms_name: 'JK-BMS 3' bms_address: '0x03' # BMS 3 DIP switch - bms_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable + bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable # BMS 4 - path: 'packages/bms/bms_combine_JK_RS485_Modbus_bms_standard.yaml' vars: bms_id: '4' # must be a number bms_name: 'JK-BMS 4' bms_address: '0x04' # BMS 4 DIP switch - bms_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable + bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable # BMS 5 - path: 'packages/bms/bms_combine_JK_RS485_Modbus_bms_standard.yaml' vars: bms_id: '5' # must be a number bms_name: 'JK-BMS 5' bms_address: '0x05' # BMS 5 DIP switch - bms_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable + bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable # BMS 6 - path: 'packages/bms/bms_combine_JK_RS485_Modbus_bms_standard.yaml' vars: bms_id: '6' # must be a number bms_name: 'JK-BMS 6' bms_address: '0x06' # BMS 6 DIP switch - bms_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable + bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable # BMS 7 - path: 'packages/bms/bms_combine_JK_RS485_Modbus_bms_standard.yaml' vars: bms_id: '7' # must be a number bms_name: 'JK-BMS 7' bms_address: '0x07' # BMS 7 DIP switch - bms_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable + bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable # BMS 8 - path: 'packages/bms/bms_combine_JK_RS485_Modbus_bms_standard.yaml' vars: bms_id: '8' # must be a number bms_name: 'JK-BMS 8' bms_address: '0x08' # BMS 8 DIP switch - bms_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable + bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable diff --git a/examples/single-node/RP_BMS_example_JK_BLE.yaml b/examples/single-node/RP_BMS_example_JK_BLE.yaml index 9e3d305..8bedadc 100644 --- a/examples/single-node/RP_BMS_example_JK_BLE.yaml +++ b/examples/single-node/RP_BMS_example_JK_BLE.yaml @@ -1,4 +1,4 @@ -# Updated : 2026.02.15 +# Updated : 2026.02.16 # Version : 1.1.3 # GitHub : https://github.com/Sleeper85/esphome-yambms @@ -41,7 +41,7 @@ # Maximum cell charging cycles is used to calculate the battey SoH. # MB31=8000.0, LF280K v3=8000.0, LF280K v2=6000.0, LF280=3000.0 (decimal is required) bms_cell_max_cycles: '6000.0' - bms_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable + bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable # BMS 2 - path: 'packages/bms/bms_combine_JK_BLE_standard.yaml' vars: @@ -52,4 +52,4 @@ # Maximum cell charging cycles is used to calculate the battey SoH. # MB31=8000.0, LF280K v3=8000.0, LF280K v2=6000.0, LF280=3000.0 (decimal is required) bms_cell_max_cycles: '6000.0' - bms_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable + bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable diff --git a/examples/single-node/RP_BMS_example_JK_UART_4G-GPS.yaml b/examples/single-node/RP_BMS_example_JK_UART_4G-GPS.yaml index 8a1f73d..75b7fde 100644 --- a/examples/single-node/RP_BMS_example_JK_UART_4G-GPS.yaml +++ b/examples/single-node/RP_BMS_example_JK_UART_4G-GPS.yaml @@ -1,4 +1,4 @@ -# Updated : 2026.02.15 +# Updated : 2026.02.16 # Version : 1.1.3 # GitHub : https://github.com/Sleeper85/esphome-yambms @@ -40,7 +40,7 @@ # Maximum cell charging cycles is used to calculate the battey SoH. # MB31=8000.0, LF280K v3=8000.0, LF280K v2=6000.0, LF280=3000.0 (decimal is required) bms_cell_max_cycles: '6000.0' - bms_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable + bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable # BMS 2 - path: 'packages/bms/bms_combine_JK_UART_4G-GPS_full.yaml' vars: @@ -50,4 +50,4 @@ # Maximum cell charging cycles is used to calculate the battey SoH. # MB31=8000.0, LF280K v3=8000.0, LF280K v2=6000.0, LF280=3000.0 (decimal is required) bms_cell_max_cycles: '6000.0' - bms_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable + bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable diff --git a/examples/single-node/RP_BMS_example_PACE_RS485.yaml b/examples/single-node/RP_BMS_example_PACE_RS485.yaml index 43d291e..9546c79 100644 --- a/examples/single-node/RP_BMS_example_PACE_RS485.yaml +++ b/examples/single-node/RP_BMS_example_PACE_RS485.yaml @@ -1,4 +1,4 @@ -# Updated : 2026.02.15 +# Updated : 2026.02.16 # Version : 1.1.4 # GitHub : https://github.com/Sleeper85/esphome-yambms @@ -41,16 +41,16 @@ vars: bms_id: '1' # BMS id and modbus address bms_name: 'PACE-BMS 1' - bms_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable + bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable # BMS 2 - path: 'packages/bms/bms_combine_PACE_RS485_bms_full.yaml' vars: bms_id: '2' # BMS id and modbus address bms_name: 'PACE-BMS 2' - bms_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable + bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable # BMS 3 - path: 'packages/bms/bms_combine_PACE_RS485_bms_full.yaml' vars: bms_id: '3' # BMS id and modbus address bms_name: 'PACE-BMS 3' - bms_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable + bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable diff --git a/examples/single-node/RP_BMS_example_SEPLOS_V1_V2_RS485.yaml b/examples/single-node/RP_BMS_example_SEPLOS_V1_V2_RS485.yaml index 4014407..7641b32 100644 --- a/examples/single-node/RP_BMS_example_SEPLOS_V1_V2_RS485.yaml +++ b/examples/single-node/RP_BMS_example_SEPLOS_V1_V2_RS485.yaml @@ -1,4 +1,4 @@ -# Updated : 2026.02.15 +# Updated : 2026.02.16 # Version : 1.1.5 # GitHub : https://github.com/Sleeper85/esphome-yambms @@ -51,7 +51,7 @@ bms_cell_ovp: '3.650' # V. Used by 'Auto CCL' functions bms_cell_uvp: '2.800' # V. Used by 'Auto DCL' functions and to calculate maximum discharge voltage bms_balance_trigger_voltage: '0.010' # V. Used by 'Auto CVL' functions - bms_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable + bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable # BMS 2 - path: 'packages/bms/bms_combine_SEPLOS_V1_V2_RS485_bms_full.yaml' vars: @@ -67,7 +67,7 @@ bms_cell_ovp: '3.650' # V. Used by 'Auto CCL' functions bms_cell_uvp: '2.800' # V. Used by 'Auto DCL' functions and to calculate maximum discharge voltage bms_balance_trigger_voltage: '0.010' # V. Used by 'Auto CVL' functions - bms_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable + bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable # BMS 3 - path: 'packages/bms/bms_combine_SEPLOS_V1_V2_RS485_bms_full.yaml' vars: @@ -83,4 +83,4 @@ bms_cell_ovp: '3.650' # V. Used by 'Auto CCL' functions bms_cell_uvp: '2.800' # V. Used by 'Auto DCL' functions and to calculate maximum discharge voltage bms_balance_trigger_voltage: '0.010' # V. Used by 'Auto CVL' functions - bms_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable + bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable diff --git a/examples/single-node/RP_BMS_example_SEPLOS_V3_RS485_sniffer.yaml b/examples/single-node/RP_BMS_example_SEPLOS_V3_RS485_sniffer.yaml index a4ff86c..e943472 100644 --- a/examples/single-node/RP_BMS_example_SEPLOS_V3_RS485_sniffer.yaml +++ b/examples/single-node/RP_BMS_example_SEPLOS_V3_RS485_sniffer.yaml @@ -1,5 +1,5 @@ -# Updated : 2026.02.03 -# Version : 1.1.3 +# Updated : 2026.02.16 +# Version : 1.1.4 # GitHub : https://github.com/Sleeper85/esphome-yambms # YamBMS ( Yet another multi-BMS Merging Solution ) @@ -19,17 +19,18 @@ ############################ Remote Packages Example ########################### -# This is not a working YAML but just code ready to copy into your main YAML. +# This is not a working YAML but just code ready to copy into +# your main YAML below the `packages:` section. + +# packages: +# remote_packages: +# url: https://github.com/Sleeper85/esphome-yambms +# ref: main +# refresh: 60s +# files: ################################################################################ -packages: - - bms: - url: https://github.com/Sleeper85/esphome-yambms - ref: main - refresh: 0s - files: # Seplos Parser - path: 'packages/bms/bms_combine_SEPLOS_V3_RS485_modbus_sniffer.yaml' vars: @@ -38,41 +39,47 @@ packages: seplos_bms_count: '3' # Seplos V3 BMS count seplos_update_interval: '3' # # Time in seconds, update interval for all data points # BMS 1 - - path: 'packages/bms/bms_combine_SEPLOS_V3_RS485_sniffer_bms_full.yaml' + - path: 'packages/bms/bms_combine_SEPLOS_V3_RS485_bms_full.yaml' vars: bms_id: '1' bms_prefix: 'bms0' # DON'T CHANGE THIS NAME ! bms_name: 'SEPLOS-BMS 1' # Required settings cannot be retrieved from BMS # These values ​​must match your BMS settings + bms_max_charge_current: '100' # A. The maximum current your BMS can handle + bms_max_discharge_current: '100' # A. The maximum current your BMS can handle # LFP values example bms_cell_ovp: '3.650' # V. Used by 'Auto CCL' functions bms_cell_uvp: '2.800' # V. Used by 'Auto DCL' functions and to calculate maximum discharge voltage bms_balance_trigger_voltage: '0.010' # V. Used by 'Auto CVL' functions - bms_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable + bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable # BMS 2 - - path: 'packages/bms/bms_combine_SEPLOS_V3_RS485_sniffer_bms_full.yaml' + - path: 'packages/bms/bms_combine_SEPLOS_V3_RS485_bms_full.yaml' vars: bms_id: '2' bms_prefix: 'bms1' # DON'T CHANGE THIS NAME ! bms_name: 'SEPLOS-BMS 2' # Required settings cannot be retrieved from BMS + bms_max_charge_current: '100' # A. The maximum current your BMS can handle + bms_max_discharge_current: '100' # A. The maximum current your BMS can handle # These values ​​must match your BMS settings # LFP values example bms_cell_ovp: '3.650' # V. Used by 'Auto CCL' functions bms_cell_uvp: '2.800' # V. Used by 'Auto DCL' functions and to calculate maximum discharge voltage bms_balance_trigger_voltage: '0.010' # V. Used by 'Auto CVL' functions - bms_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable + bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable # BMS 3 - - path: 'packages/bms/bms_combine_SEPLOS_V3_RS485_sniffer_bms_full.yaml' + - path: 'packages/bms/bms_combine_SEPLOS_V3_RS485_bms_full.yaml' vars: bms_id: '3' bms_prefix: 'bms2' # DON'T CHANGE THIS NAME ! bms_name: 'SEPLOS-BMS 3' # Required settings cannot be retrieved from BMS + bms_max_charge_current: '100' # A. The maximum current your BMS can handle + bms_max_discharge_current: '100' # A. The maximum current your BMS can handle # These values ​​must match your BMS settings # LFP values example bms_cell_ovp: '3.650' # V. Used by 'Auto CCL' functions bms_cell_uvp: '2.800' # V. Used by 'Auto DCL' functions and to calculate maximum discharge voltage bms_balance_trigger_voltage: '0.010' # V. Used by 'Auto CVL' functions - bms_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable + bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable diff --git a/examples/single-node/RP_Balancer_example.yaml b/examples/single-node/RP_Balancer_example.yaml index b7e7fa2..c33109e 100644 --- a/examples/single-node/RP_Balancer_example.yaml +++ b/examples/single-node/RP_Balancer_example.yaml @@ -1,4 +1,4 @@ -# Updated : 2026.02.15 +# Updated : 2026.02.16 # Version : 1.1.1 # GitHub : https://github.com/Sleeper85/esphome-yambms @@ -43,14 +43,14 @@ bms_id: '1' # must be a number bms_name: 'BASEN-BMS 1' bms_address: '0x01' - bms_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable + bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable # Basen module 2 - path: 'packages/bms/bms_combine_BASEN_RS485_full.yaml' vars: bms_id: '2' # must be a number bms_name: 'BASEN-BMS 2' bms_address: '0x02' - bms_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable + bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable # Balancer 1 linked to BMS 1 - path: 'packages/balancer/balancer_sensors_JK_NEEY_BLE.yaml' @@ -58,7 +58,7 @@ bms_id: '1' # must match the BMS ID balancer_name: 'Balancer 1' balancer_ble_mac_address: 11:22:33:44:55:66 - balancer_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable + balancer_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable # Balancer 2 linked to BMS 2 - path: 'packages/balancer/balancer_sensors_JK_NEEY_BLE.yaml' vars: diff --git a/examples/single-node/RP_Shunt_example.yaml b/examples/single-node/RP_Shunt_example.yaml index 4d54231..73553a2 100644 --- a/examples/single-node/RP_Shunt_example.yaml +++ b/examples/single-node/RP_Shunt_example.yaml @@ -1,4 +1,4 @@ -# Updated : 2026.02.15 +# Updated : 2026.02.16 # Version : 1.1.4 # GitHub : https://github.com/Sleeper85/esphome-yambms @@ -38,7 +38,7 @@ shunt_id: '1' # must be a number shunt_name: 'Shunt 1' shunt_uart_id: 'uart_esp_1' - shunt_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable + shunt_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable # Optional: BMS IDs connected to this shunt # If provided, the shunt will only be used when all listed BMS are online # If not provided, the shunt will be used independently of the BMS online status @@ -51,7 +51,7 @@ shunt_id: '1' # must be a number shunt_name: 'Shunt 1' shunt_uart_id: 'uart_esp_1' - shunt_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable + shunt_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable # Optional: BMS IDs connected to this shunt # If provided, the shunt will only be used when all listed BMS are online # If not provided, the shunt will be used independently of the BMS online status @@ -65,7 +65,7 @@ shunt_name: 'Shunt 1' shunt_mac_address: '60:A4:23:91:8F:55' # Your MAC address shunt_encryption_key: '0df4d0395b7d1a876c0c33ecb9e70dcd' # Your encryption key - shunt_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable + shunt_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable # Optional: BMS IDs connected to this shunt # If provided, the shunt will only be used when all listed BMS are online # If not provided, the shunt will be used independently of the BMS online status