diff --git a/YamBMS_LP_RPi_Pico_Shunts_Modbus.yaml b/YamBMS_LP_RPi_Pico_Shunts_Modbus.yaml new file mode 100644 index 0000000..6a14229 --- /dev/null +++ b/YamBMS_LP_RPi_Pico_Shunts_Modbus.yaml @@ -0,0 +1,122 @@ +# Updated : 2025.05.16 +# Version : 1.5.6 +# GitHub : https://github.com/Sleeper85/esphome-yambms + +# YamBMS ( Yet another multi-BMS Merging Solution ) + +# This YAML is free software: you can redistribute it and/or +# modify it under the terms of the GNU General Public License +# as published by the Free Software Foundation, either version 3 +# of the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. +# See the GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see . + +######################## YamBMS Local Packages Version ######################### + +# You need to copy the `packages` folder into the same folder as this YAML in order to compile it. +# Don't forget to configure your WiFi credentials in the secrets.yaml + +################################################################################ + +logger: + level: INFO # VERBOSE / DEBUG / INFO / WARN + +# +--------------------------------------+ +# | Global Settings | +# +--------------------------------------+ +substitutions: + # Name + name: '' # Name that can be added as a second prefix after the friendly name, you can leave it blank. + hostname: 'yambms' # This is the name of the node. It should always be unique in your ESPHome network. + friendly_name : 'YamBMS' # Prefix added in front of all entity names and also to classify them. + # +--------------------------------------+ + # | YamBMS Settings | + # +--------------------------------------+ + # Please read the cut-off charging logic README to understand how the YamBMS works + yambms_id: 'yambms1' + yambms_name: 'YamBMS 1' + # +--------------------------------------+ + # | Shunt Settings | + # +--------------------------------------+ + shunt_update_interval: '5s' # frequency at which Shunt data is refreshed + shunt_combine_interval: '1s' # frequency at which Shunt data is combined in YamBMS + + # Modbus options + modbus_update_interval: '5s' # frequency with which BMS/Shunt modbus servers are queried + modbus_baud_rate: '19200' # 9600 / 19200 / 11520 + modbus_command_throttle: '0ms' # minimum time in between 2 requests to the device + modbus_send_wait_time: '250ms' # time in milliseconds before the next ModBUS command is sent if an answer from a previous command is pending + +# +--------------------------------------+ +# | Packages | +# +--------------------------------------+ + +# PLEASE READ : https://github.com/Sleeper85/esphome-yambms/blob/main/documents/README/YamBMS_main_YAML_HowTo.md + +packages: + + ################ >>> CONFIG & CUSTOM LP <<< ################ + + # Local Packages intended for creating custom codes + # or sharing settings between several main.yaml + + # yambms_config: !include yambms_config.yaml + # yambms_custom: !include yambms_custom.yaml + ############################################################ + + device_board: !include packages/board/board_RP2040_RPi_Pico.yaml + + uart_1: !include packages/board/board_options_itf_uart_1.yaml + uart_2: !include packages/board/board_options_itf_uart_2.yaml + uart_3: !include packages/board/board_options_itf_uart_3.yaml + uart_4: !include packages/board/board_options_itf_uart_4.yaml + uart_5: !include packages/board/board_options_itf_uart_5.yaml + uart_6: !include packages/board/board_options_itf_uart_6.yaml + + modbus: !include + file: packages/base/device_modbus.yaml + vars: + modbus_role: 'server' # client / server + modbus_uart_id: 'uart_1' # RS485 board + + shunt1: !include + file: packages/shunt/shunt_modbus_Victron_SmartShunt_UART_minimal.yaml + vars: + shunt_id: '1' + shunt_name: 'Shunt 1' + shunt_uart_id: 'uart_2' + + shunt2: !include + file: packages/shunt/shunt_modbus_Victron_SmartShunt_UART_minimal.yaml + vars: + shunt_id: '2' + shunt_name: 'Shunt 2' + shunt_uart_id: 'uart_3' + + shunt3: !include + file: packages/shunt/shunt_modbus_Victron_SmartShunt_UART_minimal.yaml + vars: + shunt_id: '3' + shunt_name: 'Shunt 3' + shunt_uart_id: 'uart_4' + + shunt4: !include + file: packages/shunt/shunt_modbus_Victron_SmartShunt_UART_minimal.yaml + vars: + shunt_id: '4' + shunt_name: 'Shunt 4' + shunt_uart_id: 'uart_5' + + shunt5: !include + file: packages/shunt/shunt_modbus_Victron_SmartShunt_UART_minimal.yaml + vars: + shunt_id: '5' + shunt_name: 'Shunt 5' + shunt_uart_id: 'uart_6' + diff --git a/packages/board/board_RP2040_RPi_Pico.yaml b/packages/board/board_RP2040_RPi_Pico.yaml new file mode 100644 index 0000000..47eca75 --- /dev/null +++ b/packages/board/board_RP2040_RPi_Pico.yaml @@ -0,0 +1,79 @@ +# Updated : 2025.06.18 +# Version : 1.1.1 +# GitHub : https://github.com/Sleeper85/esphome-yambms + +# YamBMS ( Yet another multi-BMS Merging Solution ) + +# This YAML is free software: you can redistribute it and/or +# modify it under the terms of the GNU General Public License +# as published by the Free Software Foundation, either version 3 +# of the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. +# See the GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see . + +# Raspberry Pi Pico RP2040 board +# https://esphome.io/components/rp2040/rp2040.html +# Documentation: +# https://www.raspberrypi.com/documentation/microcontrollers/pico-series.html +# + +substitutions: + board_chip: "RP2040" + board_name: "RPi Pico" + tx_pin_1: '0' + rx_pin_1: '1' + tx_pin_2: '2' + rx_pin_2: '3' + tx_pin_3: '4' + rx_pin_3: '5' + tx_pin_4: '6' + rx_pin_4: '7' + tx_pin_5: '10' + rx_pin_5: '11' + tx_pin_6: '14' + rx_pin_6: '15' + +packages: + device_base: !include ../base/device_base_esphome.yaml + +rp2040: + board: rpipico + framework: + platform_version: https://github.com/maxgerhardt/platform-raspberrypi.git + version: 4.5.2 + # For the RP2040 PIO UARTs to work correctly with the Victron SmartShunt at 19200 baud + # we need a fix in the arduino-pico core. See: + # https://github.com/earlephilhower/arduino-pico/commit/5e74bbbbb2a22b5ae64fd6a4b0363c7f90a863d2 + # and https://github.com/earlephilhower/arduino-pico/issues/2928 + #source: https://github.com/GHswitt/arduino-pico.git#uart_pio + source: https://github.com/earlephilhower/arduino-pico.git#5e74bbb + +# +--------------------------------------+ +# | Heartbeat Light | +# +--------------------------------------+ + +light: + # LED used to see the heartbeat + # Internal : only specifying an id without a name will implicitly set this to true. + - platform: binary + output: rp2040_led + id: rp2040_light + +output: + # RP2040 LED + - platform: gpio + pin: 25 + id: rp2040_led + +interval: + - interval: 1000ms + then: + - output.turn_on: rp2040_led + - delay: 500ms + - output.turn_off: rp2040_led \ No newline at end of file diff --git a/packages/board/board_options_itf_uart_1.yaml b/packages/board/board_options_itf_uart_1.yaml new file mode 100644 index 0000000..903475e --- /dev/null +++ b/packages/board/board_options_itf_uart_1.yaml @@ -0,0 +1,25 @@ +# Updated : 2025.06.18 +# Version : 1.1.1 +# GitHub : https://github.com/Sleeper85/esphome-yambms + +# YamBMS ( Yet another multi-BMS Merging Solution ) + +# This YAML is free software: you can redistribute it and/or +# modify it under the terms of the GNU General Public License +# as published by the Free Software Foundation, either version 3 +# of the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. +# See the GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see . + +uart: + - id: uart_1 + tx_pin: ${tx_pin_1} + rx_pin: ${rx_pin_1} + baud_rate: 19200 + rx_buffer_size: 256 diff --git a/packages/board/board_options_itf_uart_2.yaml b/packages/board/board_options_itf_uart_2.yaml new file mode 100644 index 0000000..cd0ed65 --- /dev/null +++ b/packages/board/board_options_itf_uart_2.yaml @@ -0,0 +1,25 @@ +# Updated : 2025.06.18 +# Version : 1.1.1 +# GitHub : https://github.com/Sleeper85/esphome-yambms + +# YamBMS ( Yet another multi-BMS Merging Solution ) + +# This YAML is free software: you can redistribute it and/or +# modify it under the terms of the GNU General Public License +# as published by the Free Software Foundation, either version 3 +# of the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. +# See the GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see . + +uart: + - id: uart_2 + tx_pin: ${tx_pin_2} + rx_pin: ${rx_pin_2} + baud_rate: 19200 + rx_buffer_size: 256 diff --git a/packages/board/board_options_itf_uart_3.yaml b/packages/board/board_options_itf_uart_3.yaml new file mode 100644 index 0000000..c0ad4be --- /dev/null +++ b/packages/board/board_options_itf_uart_3.yaml @@ -0,0 +1,25 @@ +# Updated : 2025.06.18 +# Version : 1.1.1 +# GitHub : https://github.com/Sleeper85/esphome-yambms + +# YamBMS ( Yet another multi-BMS Merging Solution ) + +# This YAML is free software: you can redistribute it and/or +# modify it under the terms of the GNU General Public License +# as published by the Free Software Foundation, either version 3 +# of the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. +# See the GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see . + +uart: + - id: uart_3 + tx_pin: ${tx_pin_3} + rx_pin: ${rx_pin_3} + baud_rate: 19200 + rx_buffer_size: 256 diff --git a/packages/board/board_options_itf_uart_4.yaml b/packages/board/board_options_itf_uart_4.yaml new file mode 100644 index 0000000..5e2548c --- /dev/null +++ b/packages/board/board_options_itf_uart_4.yaml @@ -0,0 +1,25 @@ +# Updated : 2025.06.18 +# Version : 1.1.1 +# GitHub : https://github.com/Sleeper85/esphome-yambms + +# YamBMS ( Yet another multi-BMS Merging Solution ) + +# This YAML is free software: you can redistribute it and/or +# modify it under the terms of the GNU General Public License +# as published by the Free Software Foundation, either version 3 +# of the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. +# See the GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see . + +uart: + - id: uart_4 + tx_pin: ${tx_pin_4} + rx_pin: ${rx_pin_4} + baud_rate: 19200 + rx_buffer_size: 256 diff --git a/packages/board/board_options_itf_uart_5.yaml b/packages/board/board_options_itf_uart_5.yaml new file mode 100644 index 0000000..35855fd --- /dev/null +++ b/packages/board/board_options_itf_uart_5.yaml @@ -0,0 +1,25 @@ +# Updated : 2025.06.18 +# Version : 1.1.1 +# GitHub : https://github.com/Sleeper85/esphome-yambms + +# YamBMS ( Yet another multi-BMS Merging Solution ) + +# This YAML is free software: you can redistribute it and/or +# modify it under the terms of the GNU General Public License +# as published by the Free Software Foundation, either version 3 +# of the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. +# See the GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see . + +uart: + - id: uart_5 + tx_pin: ${tx_pin_5} + rx_pin: ${rx_pin_5} + baud_rate: 19200 + rx_buffer_size: 256 diff --git a/packages/board/board_options_itf_uart_6.yaml b/packages/board/board_options_itf_uart_6.yaml new file mode 100644 index 0000000..a1721d4 --- /dev/null +++ b/packages/board/board_options_itf_uart_6.yaml @@ -0,0 +1,25 @@ +# Updated : 2025.06.18 +# Version : 1.1.1 +# GitHub : https://github.com/Sleeper85/esphome-yambms + +# YamBMS ( Yet another multi-BMS Merging Solution ) + +# This YAML is free software: you can redistribute it and/or +# modify it under the terms of the GNU General Public License +# as published by the Free Software Foundation, either version 3 +# of the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. +# See the GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see . + +uart: + - id: uart_6 + tx_pin: ${tx_pin_6} + rx_pin: ${rx_pin_6} + baud_rate: 19200 + rx_buffer_size: 256