From faad9e60ce53b70e479361ab482b191ba2492e5c Mon Sep 17 00:00:00 2001 From: Sleeper85 Date: Thu, 5 Nov 2026 22:18:23 +0100 Subject: [PATCH] YamBMS 1.8.1 LP/RP examples Update the root YAML and the examples for the UART and CAN declarations, the RS485 block and the Board Options section. --- YamBMS_LP_DEMO.yaml | 65 +++---- YamBMS_LP_PVbrain2.yaml | 91 +++++---- YamBMS_Local_Packages_example.yaml | 86 ++++----- YamBMS_RP_BMS_BASEN_RS485.yaml | 60 +++--- YamBMS_RP_BMS_DEYE_CAN.yaml | 62 +++--- YamBMS_RP_BMS_EG4_RS485.yaml | 60 +++--- YamBMS_RP_BMS_Ecoworthy_RS485.yaml | 61 +++--- YamBMS_RP_BMS_JBD.yaml | 60 +++--- YamBMS_RP_BMS_JK-B_RS485_Modbus.yaml | 67 +++---- YamBMS_RP_BMS_JK-PB_RS485_Modbus.yaml | 67 +++---- YamBMS_RP_BMS_JK_BLE.yaml | 60 +++--- YamBMS_RP_BMS_JK_UART_4G-GPS.yaml | 60 +++--- YamBMS_RP_BMS_PACE_RS485_Modbus.yaml | 60 +++--- YamBMS_RP_BMS_SEPLOS_V1_V2_RS485_Modbus.yaml | 60 +++--- ...RP_BMS_SEPLOS_V3_RS485_Modbus_sniffer.yaml | 60 +++--- YamBMS_RP_Balancer.yaml | 60 +++--- YamBMS_RP_DEMO.yaml | 60 +++--- YamBMS_RP_Ethernet_board.yaml | 60 +++--- YamBMS_RP_HA_Display.yaml | 31 +-- YamBMS_RP_PVbrain2.yaml | 86 ++++----- YamBMS_RP_RPi_Pico_Shunts_modbus_server.yaml | 12 +- YamBMS_Remote_Packages_example.yaml | 63 +++---- ...MS_Remote_Packages_example_dev_branch.yaml | 61 +++--- documents/README/YamBMS_LP_YAML.md | 177 ++++++++++++------ documents/README/YamBMS_RP_YAML.md | 155 ++++++++++----- .../single-node/LP_BMS_example_DEYE_CAN.yaml | 2 + ...P_BMS_example_JK-B_RS485_Modbus_mode2.yaml | 9 +- ..._BMS_example_JK-PB_RS485_Modbus_mode1.yaml | 9 +- ..._BMS_example_JK-PB_RS485_Modbus_mode2.yaml | 9 +- .../single-node/RP_BMS_example_DEYE_CAN.yaml | 2 + ...P_BMS_example_JK-B_RS485_Modbus_mode2.yaml | 7 +- ..._BMS_example_JK-PB_RS485_Modbus_mode2.yaml | 7 +- 32 files changed, 800 insertions(+), 989 deletions(-) diff --git a/YamBMS_LP_DEMO.yaml b/YamBMS_LP_DEMO.yaml index 8538eb3..b445d09 100644 --- a/YamBMS_LP_DEMO.yaml +++ b/YamBMS_LP_DEMO.yaml @@ -1,5 +1,5 @@ -# Updated : 2026.08.11 -# Version : 1.8.0 +# Updated : 2026.11.05 +# Version : 1.8.1 # GitHub : https://github.com/Sleeper85/esphome-yambms # YamBMS ( Yet another multi-BMS Merging Solution ) @@ -132,6 +132,16 @@ substitutions: { 60.0, 0.00 } } # +--------------------------------------+ + # | YamBMS services | + # +--------------------------------------+ + # Update service : checks GitHub for a newer YamBMS version. + # Telemetry service : sends anonymous data about your setup (BMS model, board, + # inverter protocol, YamBMS version). It is what tells me which hardware is + # actually in use, so I know where to spend my time. Public stats and details + # on what is collected : stats.yambms.org + yambms_update_service: 'true' # Set to false to disable update checks + yambms_telemetry_service: 'true' # Set to false to disable the sending of telemetry data + # +--------------------------------------+ # | Shunt Settings | # +--------------------------------------+ shunt_update_interval: '3s' # frequency at which Shunt data is refreshed @@ -219,36 +229,6 @@ packages: # | >>> Uncomment your interfaces and options # +------------------------------------------------------------------------------+ - # UART 1 (uart_id: uart_esp_1) - uart_esp_1: !include packages/board/board_options_itf_uart_esp_1.yaml - # UART 2 (uart_id: uart_esp_2) - # uart_esp_2: !include packages/board/board_options_itf_uart_esp_2.yaml - # UART 3 (uart_id: uart_esp_3) - # uart_esp_3: !include packages/board/board_options_itf_uart_esp_3.yaml - - # UART flow control - # uart_flow_control: !include - # file: packages/board/board_options_itf_uart_flow_control.yaml - # vars: - # uart_id: 'uart_esp_1' - # uart_flow_control_pin: ${talk_pin} - - # CAN transceiver - ESP32_CAN (TJA105x, SN65HVD230, M5Stack CAN base/unit) - canbus_node_1: !include - file: packages/board/board_options_itf_canbus_esp32_can.yaml - vars: - # to bms = canbus_bms_1 - # to inverter = canbus_inverter_1 - canbus_node_id: 'canbus_inverter_1' - - # CAN transceiver - MCP2515 - # canbus_node_2: !include - # file: packages/board/board_options_itf_canbus_mcp2515.yaml - # vars: - # # to bms = canbus_bms_1 - # # to inverter = canbus_inverter_1 - # canbus_node_id: 'canbus_inverter_1' - # PSRAM octal 80Mhz # psram_octal_80Mhz: !include packages/board/board_options_PSRAM_octal_80Mhz.yaml @@ -371,12 +351,14 @@ packages: vars: canbus_id: '1' # Must be a number canbus_name: 'CANBUS 1' - canbus_node_id: 'canbus_inverter_1' # CAN bus node to which your inverter is connected canbus_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable # CAN frames sending will be paused for `30s` if the inverter does not respond with an ACK (can_id 0x305) before the end of the `canbus_link_timer` (5s by default). canbus_link_timer_enabled: 'true' # Set it to 'false' if your inverter/charger is not sending ACK (can_id 0x305) every `1s` as specified by the protocol - canbus_link_timer: '5s' - canbus_extended_ack: 'false' # Set to 'true' for enable extended 29-bit IDs for the ACK can_id 0x305 (required for Schneider XW Pro) + canbus_link_timer: '10s' # min 6s with Deye + # CAN setup + canbus_platform: 'esp32_can' # esp32_can / mcp2515 + canbus_node_id: 'canbus_inverter_1' # CAN bus node to which your inverter is connected + canbus_bitrate: '500kbps' # Default : 500kbps @@ -384,15 +366,18 @@ packages: # | >>> RS485 bus to Inverter # +------------------------------------------------------------------------------+ - # rs485_pylon: !include - # file: packages/yambms/yambms_rs485_pylon.yaml # yambms_rs485_pylon_web_server.yaml + # rs485_1: !include + # file: 'packages/yambms/yambms_rs485.yaml' + # # file: 'packages/yambms/yambms_rs485_web_server.yaml' # vars: - # rs485_id: '1' # Must be a number + # rs485_id: '1' # Must be a number # rs485_name: 'RS485 1' - # rs485_uart_id: 'uart_esp_3' # UART interface to which your inverter is connected - # rs485_uart_baud_rate: '9600' + # rs485_protocol: 'pylon' # pylon / voltronic # rs485_update_timeout: '10s' # rs485_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable + # # UART setup + # rs485_uart_id: 'uart_esp_3' # UART interface to which your inverter is connected + # rs485_uart_baud_rate: '9600' # Default : 9600 / Epever : 115200 diff --git a/YamBMS_LP_PVbrain2.yaml b/YamBMS_LP_PVbrain2.yaml index cf196f3..6e523ce 100644 --- a/YamBMS_LP_PVbrain2.yaml +++ b/YamBMS_LP_PVbrain2.yaml @@ -1,5 +1,5 @@ -# Updated : 2026.08.27 -# Version : 1.8.0 +# Updated : 2026.11.05 +# Version : 1.8.1 # GitHub : https://github.com/Sleeper85/esphome-yambms # YamBMS ( Yet another multi-BMS Merging Solution ) @@ -133,6 +133,16 @@ substitutions: { 60.0, 0.00 } } # +--------------------------------------+ + # | YamBMS services | + # +--------------------------------------+ + # Update service : checks GitHub for a newer YamBMS version. + # Telemetry service : sends anonymous data about your setup (BMS model, board, + # inverter protocol, YamBMS version). It is what tells me which hardware is + # actually in use, so I know where to spend my time. Public stats and details + # on what is collected : stats.yambms.org + yambms_update_service: 'true' # Set to false to disable update checks + yambms_telemetry_service: 'true' # Set to false to disable the sending of telemetry data + # +--------------------------------------+ # | Shunt Settings | # +--------------------------------------+ shunt_update_interval: '3s' # frequency at which Shunt data is refreshed @@ -154,14 +164,14 @@ substitutions: # +--------------------------------------+ # | UART expander WK2168 | # +--------------------------------------+ - uart0_baudrate: '2400' # uart_id : uart_${uart_hub_bus}_0 WKS {RJ45-UART0} - uart1_baudrate: '38400' # uart_id : uart_${uart_hub_bus}_1 JSY193 - uart2_baudrate: '19200' # uart_id : uart_${uart_hub_bus}_2 SmartShunt - uart3_baudrate: '9600' # uart_id : uart_${uart_hub_bus}_3 SRNE {RJ45-UART3} - uart4_baudrate: '115200' # uart_id : uart_${uart_hub_bus}_4 JK-BMS 1 - uart5_baudrate: '115200' # uart_id : uart_${uart_hub_bus}_5 JK-BMS 2 - uart6_baudrate: '115200' # uart_id : uart_${uart_hub_bus}_6 Pylontech - uart7_baudrate: '9600' # uart_id : uart_${uart_hub_bus}_7 EPEVER {RJ45-UART7} + # uart_spi_0 : 2400 WKS {RJ45-UART0} + # uart_spi_1 : 38400 JSY193 + # uart_spi_2 : 19200 SmartShunt + # uart_spi_3 : 9600 SRNE {RJ45-UART3} + # uart_spi_4 : 115200 JK-BMS 1 + # uart_spi_5 : 115200 JK-BMS 2 + # uart_spi_6 : 115200 Pylontech + # uart_spi_7 : 9600 EPEVER {RJ45-UART7} @@ -187,57 +197,34 @@ packages: # | >>> Uncomment your interfaces and options # +------------------------------------------------------------------------------+ - # UART 1 (uart_id: uart_esp_1) - # uart_esp_1: !include packages/board/board_options_itf_uart_esp_1.yaml - # UART 2 (uart_id: uart_esp_2) - # uart_esp_2: !include packages/board/board_options_itf_uart_esp_2.yaml - # UART 3 (uart_id: uart_esp_3) - # uart_esp_3: !include packages/board/board_options_itf_uart_esp_3.yaml - # BUS # spi_bus: !include packages/board/board_options_itf_bus_spi.yaml # SPI bus # i2c_bus: !include packages/board/board_options_itf_bus_i2c.yaml # I2C bus for SX1509 and BME280/BMP280 # one_wire_bus: !include packages/board/board_options_itf_bus_one_wire.yaml # One wire bus for Dallas Temperature Sensor + # WK2168 UART/IO Expander + wk2168_spi: !include packages/board/board_options_itf_wk2168_spi.yaml + # wk2168_i2c: !include packages/board/board_options_itf_wk2168_i2c.yaml + # Modbus 1 # modbus_1: !include - # file: 'packages/board/board_options_itf_modbus_expander.yaml' + # file: 'packages/board/board_options_itf_modbus.yaml' # vars: # modbus_id: '1' # can be a number or text or a mixture of both, e.g. full id = modbus_client_1 # modbus_role: 'client' # client / server - # modbus_uart_id: 'uart_${uart_hub_bus}_1' + # modbus_uart_id: 'uart_spi_1' # Modbus 2 # modbus_2: !include - # file: 'packages/board/board_options_itf_modbus_expander.yaml' + # file: 'packages/board/board_options_itf_modbus.yaml' # vars: # modbus_id: '2' # can be a number or text or a mixture of both, e.g. full id = modbus_client_2 # modbus_role: 'client' # client / server - # modbus_uart_id: 'uart_${uart_hub_bus}_2' - - # WK2168 UART/IO Expander - wk2168_spi: !include packages/board/board_options_itf_pvbrain2_wk2168_spi.yaml - # wk2168_i2c: !include packages/board/board_options_itf_pvbrain2_wk2168_i2c.yaml + # modbus_uart_id: 'uart_spi_2' # SX1509 16 channel I/O Expander # sx1509: !include packages/board/board_options_itf_pvbrain2_sx1509.yaml - # CAN transceiver - ESP32_CAN (TJA105x, SN65HVD230, M5Stack CAN base/unit) - canbus_node_1: !include - file: packages/board/board_options_itf_canbus_esp32_can.yaml - vars: - # to bms = canbus_bms_1 - # to inverter = canbus_inverter_1 - canbus_node_id: 'canbus_inverter_1' - - # CAN transceiver - SPI bus and MCP2515 - # canbus_node_2: !include - # file: packages/board/board_options_itf_canbus_mcp2515.yaml - # vars: - # # to bms = canbus_bms_1 - # # to inverter = canbus_inverter_1 - # canbus_node_id: 'canbus_inverter_1' - # PSRAM octal 80Mhz psram_octal_80Mhz: !include packages/board/board_options_PSRAM_octal_80Mhz.yaml @@ -282,12 +269,14 @@ packages: vars: canbus_id: '1' # Must be a number canbus_name: 'CANBUS 1' - canbus_node_id: 'canbus_inverter_1' # CAN bus node to which your inverter is connected canbus_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable # CAN frames sending will be paused for `30s` if the inverter does not respond with an ACK (can_id 0x305) before the end of the `canbus_link_timer` (5s by default). canbus_link_timer_enabled: 'true' # Set it to 'false' if your inverter/charger is not sending ACK (can_id 0x305) every `1s` as specified by the protocol - canbus_link_timer: '5s' - canbus_extended_ack: 'false' # Set to 'true' for enable extended 29-bit IDs for the ACK can_id 0x305 (required for Schneider XW Pro) + canbus_link_timer: '10s' # min 6s with Deye + # CAN setup + canbus_platform: 'esp32_can' # esp32_can / mcp2515 + canbus_node_id: 'canbus_inverter_1' # CAN bus node to which your inverter is connected + canbus_bitrate: '500kbps' # Default : 500kbps @@ -295,15 +284,19 @@ packages: # | >>> RS485 bus to Inverter # +------------------------------------------------------------------------------+ - # rs485_pylon: !include - # file: packages/yambms/yambms_rs485_pylon_core.yaml + # rs485_1: !include + # file: 'packages/yambms/yambms_rs485.yaml' + # # file: 'packages/yambms/yambms_rs485_web_server.yaml' # vars: - # rs485_id: '1' # Must be a number + # rs485_id: '1' # Must be a number # rs485_name: 'RS485 1' - # rs485_uart_id: 'uart_${uart_hub_bus}_3' # UART interface to which your inverter is connected - # rs485_uart_baud_rate: '9600' + # rs485_protocol: 'pylon' # pylon / voltronic # rs485_update_timeout: '10s' # rs485_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable + # # UART setup + # rs485_uart_id: 'uart_spi_3' # UART interface to which your inverter is connected + # rs485_uart_baud_rate: '9600' # Default : 9600 / Epever : 115200 + # +------------------------------------------------------------------------------+ diff --git a/YamBMS_Local_Packages_example.yaml b/YamBMS_Local_Packages_example.yaml index ebb35e7..2c88f72 100644 --- a/YamBMS_Local_Packages_example.yaml +++ b/YamBMS_Local_Packages_example.yaml @@ -1,5 +1,5 @@ -# Updated : 2026.07.30 -# Version : 1.7.1 +# Updated : 2026.11.05 +# Version : 1.8.1 # GitHub : https://github.com/Sleeper85/esphome-yambms # YamBMS ( Yet another multi-BMS Merging Solution ) @@ -117,7 +117,7 @@ substitutions: { 55.0, 0.50 }, { 60.0, 0.00 } } - # Temperature °C -> Discharge Rate (0.0C to 1.0C) + # Temperature °C -> Discharge Rate (0.0C to 1.0C) yambms_discharging_rate_table: | { {-30.0, 0.00 }, @@ -132,18 +132,28 @@ substitutions: { 60.0, 0.00 } } # +--------------------------------------+ + # | YamBMS services | + # +--------------------------------------+ + # Update service : checks GitHub for a newer YamBMS version. + # Telemetry service : sends anonymous data about your setup (BMS model, board, + # inverter protocol, YamBMS version). It is what tells me which hardware is + # actually in use, so I know where to spend my time. Public stats and details + # on what is collected : stats.yambms.org + yambms_update_service: 'true' # Set to false to disable update checks + yambms_telemetry_service: 'true' # Set to false to disable the sending of telemetry data + # +--------------------------------------+ # | Shunt Settings | # +--------------------------------------+ - shunt_update_interval: '3s' # frequency at which Shunt data is refreshed + shunt_update_interval: '3s' # frequency at which Shunt data is refreshed # +--------------------------------------+ # | BMS Settings | # +--------------------------------------+ - bms_update_interval: '3s' # frequency at which BMS data is refreshed, going below '3s' can cause problems + bms_update_interval: '3s' # frequency at which BMS data is refreshed, going below '3s' can cause problems # +--------------------------------------+ # | Health & LED Assignment Logs | # +--------------------------------------+ - enable_led_logging: 'false' # Set to true to see if an led is assigned to a component correctly, logged every 60 seconds - enable_health_logging: 'false' # Set to true to see if component health for all component instances, logged every 60 seconds + enable_led_logging: 'false' # Set to true to see if an led is assigned to a component correctly, logged every 60 seconds + enable_health_logging: 'false' # Set to true to see if component health for all component instances, logged every 60 seconds # +--------------------------------------+ # | Advanced options | # +--------------------------------------+ @@ -219,36 +229,6 @@ packages: # | >>> Uncomment your interfaces and options # +------------------------------------------------------------------------------+ - # UART 1 (uart_id: uart_esp_1) - uart_esp_1: !include packages/board/board_options_itf_uart_esp_1.yaml - # UART 2 (uart_id: uart_esp_2) - # uart_esp_2: !include packages/board/board_options_itf_uart_esp_2.yaml - # UART 3 (uart_id: uart_esp_3) - # uart_esp_3: !include packages/board/board_options_itf_uart_esp_3.yaml - - # UART flow control - # uart_flow_control: !include - # file: packages/board/board_options_itf_uart_flow_control.yaml - # vars: - # uart_id: 'uart_esp_1' - # uart_flow_control_pin: ${talk_pin} - - # CAN transceiver - ESP32_CAN (TJA105x, SN65HVD230, M5Stack CAN base/unit) - canbus_node_1: !include - file: packages/board/board_options_itf_canbus_esp32_can.yaml - vars: - # to bms = canbus_bms_1 - # to inverter = canbus_inverter_1 - canbus_node_id: 'canbus_inverter_1' - - # CAN transceiver - MCP2515 - # canbus_node_2: !include - # file: packages/board/board_options_itf_canbus_mcp2515.yaml - # vars: - # # to bms = canbus_bms_1 - # # to inverter = canbus_inverter_1 - # canbus_node_id: 'canbus_inverter_1' - # PSRAM octal 80Mhz # psram_octal_80Mhz: !include packages/board/board_options_PSRAM_octal_80Mhz.yaml @@ -289,16 +269,19 @@ packages: # +------------------------------------------------------------------------------+ canbus1: !include - file: packages/yambms/yambms_canbus.yaml # yambms_canbus_web_server.yaml + file: packages/yambms/yambms_canbus.yaml + # file: packages/yambms/yambms_canbus_web_server.yaml vars: - canbus_id: '1' # Must be a number + canbus_id: '1' # Must be a number canbus_name: 'CANBUS 1' - canbus_node_id: 'canbus_inverter_1' # CAN bus node to which your inverter is connected - canbus_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable + canbus_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable # CAN frames sending will be paused for `30s` if the inverter does not respond with an ACK (can_id 0x305) before the end of the `canbus_link_timer` (5s by default). - canbus_link_timer_enabled: 'true' # Set it to 'false' if your inverter/charger is not sending ACK (can_id 0x305) every `1s` as specified by the protocol - canbus_link_timer: '5s' - canbus_extended_ack: 'false' # Set to 'true' for enable extended 29-bit IDs for the ACK can_id 0x305 (required for Schneider XW Pro) + canbus_link_timer_enabled: 'true' # Set it to 'false' if your inverter/charger is not sending ACK (can_id 0x305) every `1s` as specified by the protocol + canbus_link_timer: '10s' # min 6s with Deye + # CAN setup + canbus_platform: 'esp32_can' # esp32_can / mcp2515 + canbus_node_id: 'canbus_inverter_1' # CAN bus node to which your inverter is connected + canbus_bitrate: '500kbps' # Default : 500kbps @@ -306,15 +289,20 @@ packages: # | >>> RS485 bus to Inverter # +------------------------------------------------------------------------------+ - # rs485_pylon: !include - # file: packages/yambms/yambms_rs485_pylon.yaml # yambms_rs485_pylon_web_server.yaml + # rs485_1: !include + # file: 'packages/yambms/yambms_rs485.yaml' + # # file: 'packages/yambms/yambms_rs485_web_server.yaml' # vars: - # rs485_id: '1' # Must be a number + # rs485_id: '1' # Must be a number # rs485_name: 'RS485 1' - # rs485_uart_id: 'uart_esp_3' # UART interface to which your inverter is connected - # rs485_uart_baud_rate: '9600' + # rs485_protocol: 'pylon' # pylon / voltronic # rs485_update_timeout: '10s' # rs485_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable + # # UART setup + # rs485_uart_id: 'uart_esp_3' # UART interface to which your inverter is connected + # # ESP32 : uart_esp_1 to uart_esp_3 + # # WK2168 : uart_spi_0 to uart_spi_7 / uart_i2c_0 to uart_i2c_7 + # rs485_uart_baud_rate: '9600' # Default : 9600 / Epever : 115200 diff --git a/YamBMS_RP_BMS_BASEN_RS485.yaml b/YamBMS_RP_BMS_BASEN_RS485.yaml index e3e86a5..87a1511 100644 --- a/YamBMS_RP_BMS_BASEN_RS485.yaml +++ b/YamBMS_RP_BMS_BASEN_RS485.yaml @@ -1,5 +1,5 @@ -# Updated : 2026.08.11 -# Version : 1.8.0 +# Updated : 2026.11.05 +# Version : 1.8.1 # GitHub : https://github.com/Sleeper85/esphome-yambms # YamBMS ( Yet another multi-BMS Merging Solution ) @@ -132,6 +132,16 @@ substitutions: { 60.0, 0.00 } } # +--------------------------------------+ + # | YamBMS services | + # +--------------------------------------+ + # Update service : checks GitHub for a newer YamBMS version. + # Telemetry service : sends anonymous data about your setup (BMS model, board, + # inverter protocol, YamBMS version). It is what tells me which hardware is + # actually in use, so I know where to spend my time. Public stats and details + # on what is collected : stats.yambms.org + yambms_update_service: 'true' # Set to false to disable update checks + yambms_telemetry_service: 'true' # Set to false to disable the sending of telemetry data + # +--------------------------------------+ # | Shunt Settings | # +--------------------------------------+ shunt_update_interval: '3s' # frequency at which Shunt data is refreshed @@ -220,33 +230,6 @@ packages: # | >>> Uncomment your interfaces and options # +------------------------------------------------------------------------------+ - # UART 1 (uart_id: uart_esp_1) - - path: 'packages/board/board_options_itf_uart_esp_1.yaml' - # UART 2 (uart_id: uart_esp_2) - # - path: 'packages/board/board_options_itf_uart_esp_2.yaml' - # UART 3 (uart_id: uart_esp_3) - # - path: 'packages/board/board_options_itf_uart_esp_3.yaml' - - # UART flow control - # - path: 'packages/board/board_options_itf_uart_flow_control.yaml' - # vars: - # uart_id: 'uart_esp_1' - # uart_flow_control_pin: ${talk_pin} - - # CAN transceiver - ESP32_CAN (TJA105x, SN65HVD230, M5Stack CAN base/unit) - - path: 'packages/board/board_options_itf_canbus_esp32_can.yaml' - vars: - # to bms = canbus_bms_1 - # to inverter = canbus_inverter_1 - canbus_node_id: 'canbus_inverter_1' - - # CAN transceiver - MCP2515 - # - path: 'packages/board/board_options_itf_canbus_mcp2515.yaml' - # vars: - # # to bms = canbus_bms_1 - # # to inverter = canbus_inverter_1 - # canbus_node_id: 'canbus_inverter_1' - # PSRAM octal 80Mhz # - path: 'packages/board/board_options_PSRAM_octal_80Mhz.yaml' @@ -314,12 +297,14 @@ packages: vars: canbus_id: '1' # must be a number canbus_name: 'CANBUS 1' - canbus_node_id: 'canbus_inverter_1' # CAN bus node to which your inverter is connected canbus_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable # CAN frames sending will be paused for `30s` if the inverter does not respond with an ACK (can_id 0x305) before the end of the `canbus_link_timer` (5s by default). canbus_link_timer_enabled: 'true' # Set it to 'false' if your inverter/charger is not sending ACK (can_id 0x305) every `1s` as specified by the protocol - canbus_link_timer: '5s' - canbus_extended_ack: 'false' # Set to 'true' for enable extended 29-bit IDs (required for Schneider XW Pro) + canbus_link_timer: '10s' # min 6s with Deye + # CAN setup + canbus_platform: 'esp32_can' # esp32_can / mcp2515 + canbus_node_id: 'canbus_inverter_1' # CAN bus node to which your inverter is connected + canbus_bitrate: '500kbps' # Default : 500kbps @@ -327,14 +312,17 @@ packages: # | >>> RS485 bus to Inverter # +------------------------------------------------------------------------------+ - # - path: 'packages/yambms/yambms_rs485_pylon.yaml' # yambms_rs485_pylon_web_server.yaml + # - path: 'packages/yambms/yambms_rs485.yaml' + # # - path: 'packages/yambms/yambms_rs485_web_server.yaml' # vars: - # rs485_id: '1' # Must be a number + # rs485_id: '1' # Must be a number # rs485_name: 'RS485 1' - # rs485_uart_id: 'uart_esp_3' # UART interface to which your inverter is connected - # rs485_uart_baud_rate: '9600' + # rs485_protocol: 'pylon' # pylon / voltronic # rs485_update_timeout: '10s' # rs485_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable + # # UART setup + # rs485_uart_id: 'uart_esp_3' # UART interface to which your inverter is connected + # rs485_uart_baud_rate: '9600' # Default : 9600 / Epever : 115200 diff --git a/YamBMS_RP_BMS_DEYE_CAN.yaml b/YamBMS_RP_BMS_DEYE_CAN.yaml index 5d719c3..f196c45 100644 --- a/YamBMS_RP_BMS_DEYE_CAN.yaml +++ b/YamBMS_RP_BMS_DEYE_CAN.yaml @@ -1,5 +1,5 @@ -# Updated : 2026.08.11 -# Version : 1.8.0 +# Updated : 2026.11.05 +# Version : 1.8.1 # GitHub : https://github.com/Sleeper85/esphome-yambms # YamBMS ( Yet another multi-BMS Merging Solution ) @@ -132,6 +132,16 @@ substitutions: { 60.0, 0.00 } } # +--------------------------------------+ + # | YamBMS services | + # +--------------------------------------+ + # Update service : checks GitHub for a newer YamBMS version. + # Telemetry service : sends anonymous data about your setup (BMS model, board, + # inverter protocol, YamBMS version). It is what tells me which hardware is + # actually in use, so I know where to spend my time. Public stats and details + # on what is collected : stats.yambms.org + yambms_update_service: 'true' # Set to false to disable update checks + yambms_telemetry_service: 'true' # Set to false to disable the sending of telemetry data + # +--------------------------------------+ # | Shunt Settings | # +--------------------------------------+ shunt_update_interval: '3s' # frequency at which Shunt data is refreshed @@ -221,33 +231,6 @@ packages: # | >>> Uncomment your interfaces and options # +------------------------------------------------------------------------------+ - # UART 1 (uart_id: uart_esp_1) - # - path: 'packages/board/board_options_itf_uart_esp_1.yaml' - # UART 2 (uart_id: uart_esp_2) - # - path: 'packages/board/board_options_itf_uart_esp_2.yaml' - # UART 3 (uart_id: uart_esp_3) - # - path: 'packages/board/board_options_itf_uart_esp_3.yaml' - - # UART flow control - # - path: 'packages/board/board_options_itf_uart_flow_control.yaml' - # vars: - # uart_id: 'uart_esp_1' - # uart_flow_control_pin: ${talk_pin} - - # CAN transceiver - ESP32_CAN (TJA105x, SN65HVD230, M5Stack CAN base/unit) - - path: 'packages/board/board_options_itf_canbus_esp32_can.yaml' - vars: - # to bms = canbus_bms_1 - # to inverter = canbus_inverter_1 - canbus_node_id: 'canbus_inverter_1' - - # CAN transceiver - MCP2515 - - path: 'packages/board/board_options_itf_canbus_mcp2515.yaml' - vars: - # to bms = canbus_bms_1 - # to inverter = canbus_inverter_1 - canbus_node_id: 'canbus_bms_1' - # PSRAM octal 80Mhz # - path: 'packages/board/board_options_PSRAM_octal_80Mhz.yaml' @@ -280,6 +263,8 @@ packages: vars: # CAN BUS ID canbus_id: 'canbus_bms_1' + canbus_platform: 'mcp2515' # esp32_can / mcp2515 + canbus_bitrate: '500kbps' # Default : 500kbps deye_name: 'DEYE-Top 1' deye_id: '1' # Deye module 1 @@ -323,12 +308,14 @@ packages: vars: canbus_id: '1' # must be a number canbus_name: 'CANBUS 1' - canbus_node_id: 'canbus_inverter_1' # CAN bus node to which your inverter is connected canbus_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable # CAN frames sending will be paused for `30s` if the inverter does not respond with an ACK (can_id 0x305) before the end of the `canbus_link_timer` (5s by default). canbus_link_timer_enabled: 'true' # Set it to 'false' if your inverter/charger is not sending ACK (can_id 0x305) every `1s` as specified by the protocol - canbus_link_timer: '5s' - canbus_extended_ack: 'false' # Set to 'true' for enable extended 29-bit IDs (required for Schneider XW Pro) + canbus_link_timer: '10s' # min 6s with Deye + # CAN setup + canbus_platform: 'esp32_can' # esp32_can / mcp2515 + canbus_node_id: 'canbus_inverter_1' # CAN bus node to which your inverter is connected + canbus_bitrate: '500kbps' # Default : 500kbps @@ -336,14 +323,17 @@ packages: # | >>> RS485 bus to Inverter # +------------------------------------------------------------------------------+ - # - path: 'packages/yambms/yambms_rs485_pylon.yaml' # yambms_rs485_pylon_web_server.yaml + # - path: 'packages/yambms/yambms_rs485.yaml' + # # - path: 'packages/yambms/yambms_rs485_web_server.yaml' # vars: - # rs485_id: '1' # Must be a number + # rs485_id: '1' # Must be a number # rs485_name: 'RS485 1' - # rs485_uart_id: 'uart_esp_3' # UART interface to which your inverter is connected - # rs485_uart_baud_rate: '9600' + # rs485_protocol: 'pylon' # pylon / voltronic # rs485_update_timeout: '10s' # rs485_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable + # # UART setup + # rs485_uart_id: 'uart_esp_3' # UART interface to which your inverter is connected + # rs485_uart_baud_rate: '9600' # Default : 9600 / Epever : 115200 diff --git a/YamBMS_RP_BMS_EG4_RS485.yaml b/YamBMS_RP_BMS_EG4_RS485.yaml index c64b567..9caa833 100644 --- a/YamBMS_RP_BMS_EG4_RS485.yaml +++ b/YamBMS_RP_BMS_EG4_RS485.yaml @@ -1,5 +1,5 @@ -# Updated : 2026.08.29 -# Version : 1.8.0 +# Updated : 2026.11.05 +# Version : 1.8.1 # GitHub : https://github.com/Sleeper85/esphome-yambms # YamBMS ( Yet another multi-BMS Merging Solution ) @@ -132,6 +132,16 @@ substitutions: { 60.0, 0.00 } } # +--------------------------------------+ + # | YamBMS services | + # +--------------------------------------+ + # Update service : checks GitHub for a newer YamBMS version. + # Telemetry service : sends anonymous data about your setup (BMS model, board, + # inverter protocol, YamBMS version). It is what tells me which hardware is + # actually in use, so I know where to spend my time. Public stats and details + # on what is collected : stats.yambms.org + yambms_update_service: 'true' # Set to false to disable update checks + yambms_telemetry_service: 'true' # Set to false to disable the sending of telemetry data + # +--------------------------------------+ # | Shunt Settings | # +--------------------------------------+ shunt_update_interval: '3s' # frequency at which Shunt data is refreshed @@ -220,33 +230,6 @@ packages: # | >>> Uncomment your interfaces and options # +------------------------------------------------------------------------------+ - # UART 1 (uart_id: uart_esp_1) - - path: 'packages/board/board_options_itf_uart_esp_1.yaml' - # UART 2 (uart_id: uart_esp_2) - # - path: 'packages/board/board_options_itf_uart_esp_2.yaml' - # UART 3 (uart_id: uart_esp_3) - # - path: 'packages/board/board_options_itf_uart_esp_3.yaml' - - # UART flow control - # - path: 'packages/board/board_options_itf_uart_flow_control.yaml' - # vars: - # uart_id: 'uart_esp_1' - # uart_flow_control_pin: ${talk_pin} - - # CAN transceiver - ESP32_CAN (TJA105x, SN65HVD230, M5Stack CAN base/unit) - - path: 'packages/board/board_options_itf_canbus_esp32_can.yaml' - vars: - # to bms = canbus_bms_1 - # to inverter = canbus_inverter_1 - canbus_node_id: 'canbus_inverter_1' - - # CAN transceiver - MCP2515 - # - path: 'packages/board/board_options_itf_canbus_mcp2515.yaml' - # vars: - # # to bms = canbus_bms_1 - # # to inverter = canbus_inverter_1 - # canbus_node_id: 'canbus_inverter_1' - # PSRAM octal 80Mhz # - path: 'packages/board/board_options_PSRAM_octal_80Mhz.yaml' @@ -323,12 +306,14 @@ packages: vars: canbus_id: '1' # must be a number canbus_name: 'CANBUS 1' - canbus_node_id: 'canbus_inverter_1' # CAN bus node to which your inverter is connected canbus_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable # CAN frames sending will be paused for `30s` if the inverter does not respond with an ACK (can_id 0x305) before the end of the `canbus_link_timer` (5s by default). canbus_link_timer_enabled: 'true' # Set it to 'false' if your inverter/charger is not sending ACK (can_id 0x305) every `1s` as specified by the protocol - canbus_link_timer: '5s' - canbus_extended_ack: 'false' # Set to 'true' for enable extended 29-bit IDs (required for Schneider XW Pro) + canbus_link_timer: '10s' # min 6s with Deye + # CAN setup + canbus_platform: 'esp32_can' # esp32_can / mcp2515 + canbus_node_id: 'canbus_inverter_1' # CAN bus node to which your inverter is connected + canbus_bitrate: '500kbps' # Default : 500kbps @@ -336,14 +321,17 @@ packages: # | >>> RS485 bus to Inverter # +------------------------------------------------------------------------------+ - # - path: 'packages/yambms/yambms_rs485_pylon.yaml' # yambms_rs485_pylon_web_server.yaml + # - path: 'packages/yambms/yambms_rs485.yaml' + # # - path: 'packages/yambms/yambms_rs485_web_server.yaml' # vars: - # rs485_id: '1' # Must be a number + # rs485_id: '1' # Must be a number # rs485_name: 'RS485 1' - # rs485_uart_id: 'uart_esp_3' # UART interface to which your inverter is connected - # rs485_uart_baud_rate: '9600' + # rs485_protocol: 'pylon' # pylon / voltronic # rs485_update_timeout: '10s' # rs485_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable + # # UART setup + # rs485_uart_id: 'uart_esp_3' # UART interface to which your inverter is connected + # rs485_uart_baud_rate: '9600' # Default : 9600 / Epever : 115200 diff --git a/YamBMS_RP_BMS_Ecoworthy_RS485.yaml b/YamBMS_RP_BMS_Ecoworthy_RS485.yaml index 4d48ab9..aa581b3 100644 --- a/YamBMS_RP_BMS_Ecoworthy_RS485.yaml +++ b/YamBMS_RP_BMS_Ecoworthy_RS485.yaml @@ -1,5 +1,5 @@ -# Updated : 2026.08.11 -# Version : 1.8.0 +# Updated : 2026.11.05 +# Version : 1.8.1 # GitHub : https://github.com/Sleeper85/esphome-yambms # YamBMS ( Yet another multi-BMS Merging Solution ) @@ -132,6 +132,16 @@ substitutions: { 60.0, 0.00 } } # +--------------------------------------+ + # | YamBMS services | + # +--------------------------------------+ + # Update service : checks GitHub for a newer YamBMS version. + # Telemetry service : sends anonymous data about your setup (BMS model, board, + # inverter protocol, YamBMS version). It is what tells me which hardware is + # actually in use, so I know where to spend my time. Public stats and details + # on what is collected : stats.yambms.org + yambms_update_service: 'true' # Set to false to disable update checks + yambms_telemetry_service: 'true' # Set to false to disable the sending of telemetry data + # +--------------------------------------+ # | Shunt Settings | # +--------------------------------------+ shunt_update_interval: '3s' # frequency at which Shunt data is refreshed @@ -220,33 +230,6 @@ packages: # | >>> Uncomment your interfaces and options # +------------------------------------------------------------------------------+ - # UART 1 (uart_id: uart_esp_1) - - path: 'packages/board/board_options_itf_uart_esp_1.yaml' - # UART 2 (uart_id: uart_esp_2) - # - path: 'packages/board/board_options_itf_uart_esp_2.yaml' - # UART 3 (uart_id: uart_esp_3) - # - path: 'packages/board/board_options_itf_uart_esp_3.yaml' - - # UART flow control - # - path: 'packages/board/board_options_itf_uart_flow_control.yaml' - # vars: - # uart_id: 'uart_esp_1' - # uart_flow_control_pin: ${talk_pin} - - # CAN transceiver - ESP32_CAN (TJA105x, SN65HVD230, M5Stack CAN base/unit) - - path: 'packages/board/board_options_itf_canbus_esp32_can.yaml' - vars: - # to bms = canbus_bms_1 - # to inverter = canbus_inverter_1 - canbus_node_id: 'canbus_inverter_1' - - # CAN transceiver - MCP2515 - # - path: 'packages/board/board_options_itf_canbus_mcp2515.yaml' - # vars: - # # to bms = canbus_bms_1 - # # to inverter = canbus_inverter_1 - # canbus_node_id: 'canbus_inverter_1' - # PSRAM octal 80Mhz # - path: 'packages/board/board_options_PSRAM_octal_80Mhz.yaml' @@ -321,12 +304,14 @@ packages: vars: canbus_id: '1' # must be a number canbus_name: 'CANBUS 1' - canbus_node_id: 'canbus_inverter_1' # CAN bus node to which your inverter is connected canbus_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable # CAN frames sending will be paused for `30s` if the inverter does not respond with an ACK (can_id 0x305) before the end of the `canbus_link_timer` (5s by default). canbus_link_timer_enabled: 'true' # Set it to 'false' if your inverter/charger is not sending ACK (can_id 0x305) every `1s` as specified by the protocol - canbus_link_timer: '5s' - canbus_extended_ack: 'false' # Set to 'true' for enable extended 29-bit IDs (required for Schneider XW Pro) + canbus_link_timer: '10s' # min 6s with Deye + # CAN setup + canbus_platform: 'esp32_can' # esp32_can / mcp2515 + canbus_node_id: 'canbus_inverter_1' # CAN bus node to which your inverter is connected + canbus_bitrate: '500kbps' # Default : 500kbps @@ -334,14 +319,18 @@ packages: # | >>> RS485 bus to Inverter # +------------------------------------------------------------------------------+ - # - path: 'packages/yambms/yambms_rs485_pylon.yaml' # yambms_rs485_pylon_web_server.yaml + # - path: 'packages/yambms/yambms_rs485.yaml' + # # - path: 'packages/yambms/yambms_rs485_web_server.yaml' # vars: - # rs485_id: '1' # Must be a number + # rs485_id: '1' # Must be a number # rs485_name: 'RS485 1' - # rs485_uart_id: 'uart_esp_3' # UART interface to which your inverter is connected - # rs485_uart_baud_rate: '9600' + # rs485_protocol: 'pylon' # pylon / voltronic # rs485_update_timeout: '10s' # rs485_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable + # # UART setup + # rs485_uart_id: 'uart_esp_3' # UART interface to which your inverter is connected + # rs485_uart_baud_rate: '9600' # Default : 9600 / Epever : 115200 + # +------------------------------------------------------------------------------+ diff --git a/YamBMS_RP_BMS_JBD.yaml b/YamBMS_RP_BMS_JBD.yaml index 41d76ef..e887c4a 100644 --- a/YamBMS_RP_BMS_JBD.yaml +++ b/YamBMS_RP_BMS_JBD.yaml @@ -1,5 +1,5 @@ -# Updated : 2026.08.11 -# Version : 1.8.0 +# Updated : 2026.11.05 +# Version : 1.8.1 # GitHub : https://github.com/Sleeper85/esphome-yambms # YamBMS ( Yet another multi-BMS Merging Solution ) @@ -132,6 +132,16 @@ substitutions: { 60.0, 0.00 } } # +--------------------------------------+ + # | YamBMS services | + # +--------------------------------------+ + # Update service : checks GitHub for a newer YamBMS version. + # Telemetry service : sends anonymous data about your setup (BMS model, board, + # inverter protocol, YamBMS version). It is what tells me which hardware is + # actually in use, so I know where to spend my time. Public stats and details + # on what is collected : stats.yambms.org + yambms_update_service: 'true' # Set to false to disable update checks + yambms_telemetry_service: 'true' # Set to false to disable the sending of telemetry data + # +--------------------------------------+ # | Shunt Settings | # +--------------------------------------+ shunt_update_interval: '3s' # frequency at which Shunt data is refreshed @@ -220,33 +230,6 @@ packages: # | >>> Uncomment your interfaces and options # +------------------------------------------------------------------------------+ - # UART 1 (uart_id: uart_esp_1) - - path: 'packages/board/board_options_itf_uart_esp_1.yaml' - # UART 2 (uart_id: uart_esp_2) - # - path: 'packages/board/board_options_itf_uart_esp_2.yaml' - # UART 3 (uart_id: uart_esp_3) - # - path: 'packages/board/board_options_itf_uart_esp_3.yaml' - - # UART flow control - # - path: 'packages/board/board_options_itf_uart_flow_control.yaml' - # vars: - # uart_id: 'uart_esp_1' - # uart_flow_control_pin: ${talk_pin} - - # CAN transceiver - ESP32_CAN (TJA105x, SN65HVD230, M5Stack CAN base/unit) - - path: 'packages/board/board_options_itf_canbus_esp32_can.yaml' - vars: - # to bms = canbus_bms_1 - # to inverter = canbus_inverter_1 - canbus_node_id: 'canbus_inverter_1' - - # CAN transceiver - MCP2515 - # - path: 'packages/board/board_options_itf_canbus_mcp2515.yaml' - # vars: - # # to bms = canbus_bms_1 - # # to inverter = canbus_inverter_1 - # canbus_node_id: 'canbus_inverter_1' - # PSRAM octal 80Mhz # - path: 'packages/board/board_options_PSRAM_octal_80Mhz.yaml' @@ -330,12 +313,14 @@ packages: vars: canbus_id: '1' # must be a number canbus_name: 'CANBUS 1' - canbus_node_id: 'canbus_inverter_1' # CAN bus node to which your inverter is connected canbus_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable # CAN frames sending will be paused for `30s` if the inverter does not respond with an ACK (can_id 0x305) before the end of the `canbus_link_timer` (5s by default). canbus_link_timer_enabled: 'true' # Set it to 'false' if your inverter/charger is not sending ACK (can_id 0x305) every `1s` as specified by the protocol - canbus_link_timer: '5s' - canbus_extended_ack: 'false' # Set to 'true' for enable extended 29-bit IDs (required for Schneider XW Pro) + canbus_link_timer: '10s' # min 6s with Deye + # CAN setup + canbus_platform: 'esp32_can' # esp32_can / mcp2515 + canbus_node_id: 'canbus_inverter_1' # CAN bus node to which your inverter is connected + canbus_bitrate: '500kbps' # Default : 500kbps @@ -343,14 +328,17 @@ packages: # | >>> RS485 bus to Inverter # +------------------------------------------------------------------------------+ - # - path: 'packages/yambms/yambms_rs485_pylon.yaml' # yambms_rs485_pylon_web_server.yaml + # - path: 'packages/yambms/yambms_rs485.yaml' + # # - path: 'packages/yambms/yambms_rs485_web_server.yaml' # vars: - # rs485_id: '1' # Must be a number + # rs485_id: '1' # Must be a number # rs485_name: 'RS485 1' - # rs485_uart_id: 'uart_esp_3' # UART interface to which your inverter is connected - # rs485_uart_baud_rate: '9600' + # rs485_protocol: 'pylon' # pylon / voltronic # rs485_update_timeout: '10s' # rs485_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable + # # UART setup + # rs485_uart_id: 'uart_esp_3' # UART interface to which your inverter is connected + # rs485_uart_baud_rate: '9600' # Default : 9600 / Epever : 115200 diff --git a/YamBMS_RP_BMS_JK-B_RS485_Modbus.yaml b/YamBMS_RP_BMS_JK-B_RS485_Modbus.yaml index 5e85634..aad600d 100644 --- a/YamBMS_RP_BMS_JK-B_RS485_Modbus.yaml +++ b/YamBMS_RP_BMS_JK-B_RS485_Modbus.yaml @@ -1,5 +1,5 @@ -# Updated : 2026.08.11 -# Version : 1.8.0 +# Updated : 2026.11.05 +# Version : 1.8.1 # GitHub : https://github.com/Sleeper85/esphome-yambms # YamBMS ( Yet another multi-BMS Merging Solution ) @@ -132,6 +132,16 @@ substitutions: { 60.0, 0.00 } } # +--------------------------------------+ + # | YamBMS services | + # +--------------------------------------+ + # Update service : checks GitHub for a newer YamBMS version. + # Telemetry service : sends anonymous data about your setup (BMS model, board, + # inverter protocol, YamBMS version). It is what tells me which hardware is + # actually in use, so I know where to spend my time. Public stats and details + # on what is collected : stats.yambms.org + yambms_update_service: 'true' # Set to false to disable update checks + yambms_telemetry_service: 'true' # Set to false to disable the sending of telemetry data + # +--------------------------------------+ # | Shunt Settings | # +--------------------------------------+ shunt_update_interval: '3s' # frequency at which Shunt data is refreshed @@ -220,33 +230,6 @@ packages: # | >>> Uncomment your interfaces and options # +------------------------------------------------------------------------------+ - # UART 1 (uart_id: uart_esp_1) - - path: 'packages/board/board_options_itf_uart_esp_1.yaml' - # UART 2 (uart_id: uart_esp_2) - # - path: 'packages/board/board_options_itf_uart_esp_2.yaml' - # UART 3 (uart_id: uart_esp_3) - # - path: 'packages/board/board_options_itf_uart_esp_3.yaml' - - # UART flow control - # - path: 'packages/board/board_options_itf_uart_flow_control.yaml' - # vars: - # uart_id: 'uart_esp_1' - # uart_flow_control_pin: ${talk_pin} - - # CAN transceiver - ESP32_CAN (TJA105x, SN65HVD230, M5Stack CAN base/unit) - - path: 'packages/board/board_options_itf_canbus_esp32_can.yaml' - vars: - # to bms = canbus_bms_1 - # to inverter = canbus_inverter_1 - canbus_node_id: 'canbus_inverter_1' - - # CAN transceiver - MCP2515 - # - path: 'packages/board/board_options_itf_canbus_mcp2515.yaml' - # vars: - # # to bms = canbus_bms_1 - # # to inverter = canbus_inverter_1 - # canbus_node_id: 'canbus_inverter_1' - # PSRAM octal 80Mhz # - path: 'packages/board/board_options_PSRAM_octal_80Mhz.yaml' @@ -274,17 +257,12 @@ packages: - # RS485 Sniffer with talk_pin (WS-RS485-CAN and other RS485 boards with a flow_control_pin) - # - path: 'packages/bms/bms_combine_JK_RS485_Modbus_sniffer_talk_pin.yaml' - # vars: - # sniffer_protocol: 'JK02_32S' - # sniffer_uart_id: 'uart_esp_1' - # sniffer_talk_pin: ${talk_pin} # can be replaced by the GPIO number # RS485 Sniffer - path: 'packages/bms/bms_combine_JK_RS485_Modbus_sniffer.yaml' vars: sniffer_protocol: 'JK02_32S' sniffer_uart_id: 'uart_esp_1' + # uart_flow_control_pin: ${talk_pin} # WS-RS485-CAN and other RS485 boards with a flow_control_pin # BMS 1 - path: 'packages/bms/bms_combine_JK_RS485_Modbus_JK-B_standard.yaml' vars: @@ -360,12 +338,14 @@ packages: vars: canbus_id: '1' # must be a number canbus_name: 'CANBUS 1' - canbus_node_id: 'canbus_inverter_1' # CAN bus node to which your inverter is connected canbus_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable # CAN frames sending will be paused for `30s` if the inverter does not respond with an ACK (can_id 0x305) before the end of the `canbus_link_timer` (5s by default). canbus_link_timer_enabled: 'true' # Set it to 'false' if your inverter/charger is not sending ACK (can_id 0x305) every `1s` as specified by the protocol - canbus_link_timer: '5s' - canbus_extended_ack: 'false' # Set to 'true' for enable extended 29-bit IDs (required for Schneider XW Pro) + canbus_link_timer: '10s' # min 6s with Deye + # CAN setup + canbus_platform: 'esp32_can' # esp32_can / mcp2515 + canbus_node_id: 'canbus_inverter_1' # CAN bus node to which your inverter is connected + canbus_bitrate: '500kbps' # Default : 500kbps @@ -373,14 +353,17 @@ packages: # | >>> RS485 bus to Inverter # +------------------------------------------------------------------------------+ - # - path: 'packages/yambms/yambms_rs485_pylon.yaml' # yambms_rs485_pylon_web_server.yaml + # - path: 'packages/yambms/yambms_rs485.yaml' + # # - path: 'packages/yambms/yambms_rs485_web_server.yaml' # vars: - # rs485_id: '1' # Must be a number + # rs485_id: '1' # Must be a number # rs485_name: 'RS485 1' - # rs485_uart_id: 'uart_esp_3' # UART interface to which your inverter is connected - # rs485_uart_baud_rate: '9600' + # rs485_protocol: 'pylon' # pylon / voltronic # rs485_update_timeout: '10s' # rs485_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable + # # UART setup + # rs485_uart_id: 'uart_esp_3' # UART interface to which your inverter is connected + # rs485_uart_baud_rate: '9600' # Default : 9600 / Epever : 115200 diff --git a/YamBMS_RP_BMS_JK-PB_RS485_Modbus.yaml b/YamBMS_RP_BMS_JK-PB_RS485_Modbus.yaml index 15e4dbd..3cc1e72 100644 --- a/YamBMS_RP_BMS_JK-PB_RS485_Modbus.yaml +++ b/YamBMS_RP_BMS_JK-PB_RS485_Modbus.yaml @@ -1,5 +1,5 @@ -# Updated : 2026.08.11 -# Version : 1.8.0 +# Updated : 2026.11.05 +# Version : 1.8.1 # GitHub : https://github.com/Sleeper85/esphome-yambms # YamBMS ( Yet another multi-BMS Merging Solution ) @@ -132,6 +132,16 @@ substitutions: { 60.0, 0.00 } } # +--------------------------------------+ + # | YamBMS services | + # +--------------------------------------+ + # Update service : checks GitHub for a newer YamBMS version. + # Telemetry service : sends anonymous data about your setup (BMS model, board, + # inverter protocol, YamBMS version). It is what tells me which hardware is + # actually in use, so I know where to spend my time. Public stats and details + # on what is collected : stats.yambms.org + yambms_update_service: 'true' # Set to false to disable update checks + yambms_telemetry_service: 'true' # Set to false to disable the sending of telemetry data + # +--------------------------------------+ # | Shunt Settings | # +--------------------------------------+ shunt_update_interval: '3s' # frequency at which Shunt data is refreshed @@ -220,33 +230,6 @@ packages: # | >>> Uncomment your interfaces and options # +------------------------------------------------------------------------------+ - # UART 1 (uart_id: uart_esp_1) - - path: 'packages/board/board_options_itf_uart_esp_1.yaml' - # UART 2 (uart_id: uart_esp_2) - # - path: 'packages/board/board_options_itf_uart_esp_2.yaml' - # UART 3 (uart_id: uart_esp_3) - # - path: 'packages/board/board_options_itf_uart_esp_3.yaml' - - # UART flow control - # - path: 'packages/board/board_options_itf_uart_flow_control.yaml' - # vars: - # uart_id: 'uart_esp_1' - # uart_flow_control_pin: ${talk_pin} - - # CAN transceiver - ESP32_CAN (TJA105x, SN65HVD230, M5Stack CAN base/unit) - - path: 'packages/board/board_options_itf_canbus_esp32_can.yaml' - vars: - # to bms = canbus_bms_1 - # to inverter = canbus_inverter_1 - canbus_node_id: 'canbus_inverter_1' - - # CAN transceiver - MCP2515 - # - path: 'packages/board/board_options_itf_canbus_mcp2515.yaml' - # vars: - # # to bms = canbus_bms_1 - # # to inverter = canbus_inverter_1 - # canbus_node_id: 'canbus_inverter_1' - # PSRAM octal 80Mhz # - path: 'packages/board/board_options_PSRAM_octal_80Mhz.yaml' @@ -274,17 +257,12 @@ packages: - # RS485 Sniffer with talk_pin (WS-RS485-CAN and other RS485 boards with a flow_control_pin) - # - path: 'packages/bms/bms_combine_JK_RS485_Modbus_sniffer_talk_pin.yaml' - # vars: - # sniffer_protocol: 'JK02_32S' - # sniffer_uart_id: 'uart_esp_1' - # sniffer_talk_pin: ${talk_pin} # can be replaced by the GPIO number # RS485 Sniffer - path: 'packages/bms/bms_combine_JK_RS485_Modbus_sniffer.yaml' vars: sniffer_protocol: 'JK02_32S' sniffer_uart_id: 'uart_esp_1' + # uart_flow_control_pin: ${talk_pin} # WS-RS485-CAN and other RS485 boards with a flow_control_pin # BMS 1 - path: 'packages/bms/bms_combine_JK_RS485_Modbus_bms_standard.yaml' vars: @@ -360,12 +338,14 @@ packages: vars: canbus_id: '1' # must be a number canbus_name: 'CANBUS 1' - canbus_node_id: 'canbus_inverter_1' # CAN bus node to which your inverter is connected canbus_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable # CAN frames sending will be paused for `30s` if the inverter does not respond with an ACK (can_id 0x305) before the end of the `canbus_link_timer` (5s by default). canbus_link_timer_enabled: 'true' # Set it to 'false' if your inverter/charger is not sending ACK (can_id 0x305) every `1s` as specified by the protocol - canbus_link_timer: '5s' - canbus_extended_ack: 'false' # Set to 'true' for enable extended 29-bit IDs (required for Schneider XW Pro) + canbus_link_timer: '10s' # min 6s with Deye + # CAN setup + canbus_platform: 'esp32_can' # esp32_can / mcp2515 + canbus_node_id: 'canbus_inverter_1' # CAN bus node to which your inverter is connected + canbus_bitrate: '500kbps' # Default : 500kbps @@ -373,14 +353,17 @@ packages: # | >>> RS485 bus to Inverter # +------------------------------------------------------------------------------+ - # - path: 'packages/yambms/yambms_rs485_pylon.yaml' # yambms_rs485_pylon_web_server.yaml + # - path: 'packages/yambms/yambms_rs485.yaml' + # # - path: 'packages/yambms/yambms_rs485_web_server.yaml' # vars: - # rs485_id: '1' # Must be a number + # rs485_id: '1' # Must be a number # rs485_name: 'RS485 1' - # rs485_uart_id: 'uart_esp_3' # UART interface to which your inverter is connected - # rs485_uart_baud_rate: '9600' + # rs485_protocol: 'pylon' # pylon / voltronic # rs485_update_timeout: '10s' # rs485_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable + # # UART setup + # rs485_uart_id: 'uart_esp_3' # UART interface to which your inverter is connected + # rs485_uart_baud_rate: '9600' # Default : 9600 / Epever : 115200 diff --git a/YamBMS_RP_BMS_JK_BLE.yaml b/YamBMS_RP_BMS_JK_BLE.yaml index c4c2549..b20be39 100644 --- a/YamBMS_RP_BMS_JK_BLE.yaml +++ b/YamBMS_RP_BMS_JK_BLE.yaml @@ -1,5 +1,5 @@ -# Updated : 2026.08.11 -# Version : 1.8.0 +# Updated : 2026.11.05 +# Version : 1.8.1 # GitHub : https://github.com/Sleeper85/esphome-yambms # YamBMS ( Yet another multi-BMS Merging Solution ) @@ -132,6 +132,16 @@ substitutions: { 60.0, 0.00 } } # +--------------------------------------+ + # | YamBMS services | + # +--------------------------------------+ + # Update service : checks GitHub for a newer YamBMS version. + # Telemetry service : sends anonymous data about your setup (BMS model, board, + # inverter protocol, YamBMS version). It is what tells me which hardware is + # actually in use, so I know where to spend my time. Public stats and details + # on what is collected : stats.yambms.org + yambms_update_service: 'true' # Set to false to disable update checks + yambms_telemetry_service: 'true' # Set to false to disable the sending of telemetry data + # +--------------------------------------+ # | Shunt Settings | # +--------------------------------------+ shunt_update_interval: '3s' # frequency at which Shunt data is refreshed @@ -220,33 +230,6 @@ packages: # | >>> Uncomment your interfaces and options # +------------------------------------------------------------------------------+ - # UART 1 (uart_id: uart_esp_1) - # - path: 'packages/board/board_options_itf_uart_esp_1.yaml' - # UART 2 (uart_id: uart_esp_2) - # - path: 'packages/board/board_options_itf_uart_esp_2.yaml' - # UART 3 (uart_id: uart_esp_3) - # - path: 'packages/board/board_options_itf_uart_esp_3.yaml' - - # UART flow control - # - path: 'packages/board/board_options_itf_uart_flow_control.yaml' - # vars: - # uart_id: 'uart_esp_1' - # uart_flow_control_pin: ${talk_pin} - - # CAN transceiver - ESP32_CAN (TJA105x, SN65HVD230, M5Stack CAN base/unit) - - path: 'packages/board/board_options_itf_canbus_esp32_can.yaml' - vars: - # to bms = canbus_bms_1 - # to inverter = canbus_inverter_1 - canbus_node_id: 'canbus_inverter_1' - - # CAN transceiver - MCP2515 - # - path: 'packages/board/board_options_itf_canbus_mcp2515.yaml' - # vars: - # # to bms = canbus_bms_1 - # # to inverter = canbus_inverter_1 - # canbus_node_id: 'canbus_inverter_1' - # PSRAM octal 80Mhz # - path: 'packages/board/board_options_PSRAM_octal_80Mhz.yaml' @@ -315,12 +298,14 @@ packages: vars: canbus_id: '1' # must be a number canbus_name: 'CANBUS 1' - canbus_node_id: 'canbus_inverter_1' # CAN bus node to which your inverter is connected canbus_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable # CAN frames sending will be paused for `30s` if the inverter does not respond with an ACK (can_id 0x305) before the end of the `canbus_link_timer` (5s by default). canbus_link_timer_enabled: 'true' # Set it to 'false' if your inverter/charger is not sending ACK (can_id 0x305) every `1s` as specified by the protocol - canbus_link_timer: '5s' - canbus_extended_ack: 'false' # Set to 'true' for enable extended 29-bit IDs (required for Schneider XW Pro) + canbus_link_timer: '10s' # min 6s with Deye + # CAN setup + canbus_platform: 'esp32_can' # esp32_can / mcp2515 + canbus_node_id: 'canbus_inverter_1' # CAN bus node to which your inverter is connected + canbus_bitrate: '500kbps' # Default : 500kbps @@ -328,14 +313,17 @@ packages: # | >>> RS485 bus to Inverter # +------------------------------------------------------------------------------+ - # - path: 'packages/yambms/yambms_rs485_pylon.yaml' # yambms_rs485_pylon_web_server.yaml + # - path: 'packages/yambms/yambms_rs485.yaml' + # # - path: 'packages/yambms/yambms_rs485_web_server.yaml' # vars: - # rs485_id: '1' # Must be a number + # rs485_id: '1' # Must be a number # rs485_name: 'RS485 1' - # rs485_uart_id: 'uart_esp_3' # UART interface to which your inverter is connected - # rs485_uart_baud_rate: '9600' + # rs485_protocol: 'pylon' # pylon / voltronic # rs485_update_timeout: '10s' # rs485_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable + # # UART setup + # rs485_uart_id: 'uart_esp_3' # UART interface to which your inverter is connected + # rs485_uart_baud_rate: '9600' # Default : 9600 / Epever : 115200 diff --git a/YamBMS_RP_BMS_JK_UART_4G-GPS.yaml b/YamBMS_RP_BMS_JK_UART_4G-GPS.yaml index 1008a7e..0e4a987 100644 --- a/YamBMS_RP_BMS_JK_UART_4G-GPS.yaml +++ b/YamBMS_RP_BMS_JK_UART_4G-GPS.yaml @@ -1,5 +1,5 @@ -# Updated : 2026.08.11 -# Version : 1.8.0 +# Updated : 2026.11.05 +# Version : 1.8.1 # GitHub : https://github.com/Sleeper85/esphome-yambms # YamBMS ( Yet another multi-BMS Merging Solution ) @@ -132,6 +132,16 @@ substitutions: { 60.0, 0.00 } } # +--------------------------------------+ + # | YamBMS services | + # +--------------------------------------+ + # Update service : checks GitHub for a newer YamBMS version. + # Telemetry service : sends anonymous data about your setup (BMS model, board, + # inverter protocol, YamBMS version). It is what tells me which hardware is + # actually in use, so I know where to spend my time. Public stats and details + # on what is collected : stats.yambms.org + yambms_update_service: 'true' # Set to false to disable update checks + yambms_telemetry_service: 'true' # Set to false to disable the sending of telemetry data + # +--------------------------------------+ # | Shunt Settings | # +--------------------------------------+ shunt_update_interval: '3s' # frequency at which Shunt data is refreshed @@ -220,33 +230,6 @@ packages: # | >>> Uncomment your interfaces and options # +------------------------------------------------------------------------------+ - # UART 1 (uart_id: uart_esp_1) - - path: 'packages/board/board_options_itf_uart_esp_1.yaml' - # UART 2 (uart_id: uart_esp_2) - - path: 'packages/board/board_options_itf_uart_esp_2.yaml' - # UART 3 (uart_id: uart_esp_3) - # - path: 'packages/board/board_options_itf_uart_esp_3.yaml' - - # UART flow control - # - path: 'packages/board/board_options_itf_uart_flow_control.yaml' - # vars: - # uart_id: 'uart_esp_1' - # uart_flow_control_pin: ${talk_pin} - - # CAN transceiver - ESP32_CAN (TJA105x, SN65HVD230, M5Stack CAN base/unit) - - path: 'packages/board/board_options_itf_canbus_esp32_can.yaml' - vars: - # to bms = canbus_bms_1 - # to inverter = canbus_inverter_1 - canbus_node_id: 'canbus_inverter_1' - - # CAN transceiver - MCP2515 - # - path: 'packages/board/board_options_itf_canbus_mcp2515.yaml' - # vars: - # # to bms = canbus_bms_1 - # # to inverter = canbus_inverter_1 - # canbus_node_id: 'canbus_inverter_1' - # PSRAM octal 80Mhz # - path: 'packages/board/board_options_PSRAM_octal_80Mhz.yaml' @@ -313,12 +296,14 @@ packages: vars: canbus_id: '1' # must be a number canbus_name: 'CANBUS 1' - canbus_node_id: 'canbus_inverter_1' # CAN bus node to which your inverter is connected canbus_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable # CAN frames sending will be paused for `30s` if the inverter does not respond with an ACK (can_id 0x305) before the end of the `canbus_link_timer` (5s by default). canbus_link_timer_enabled: 'true' # Set it to 'false' if your inverter/charger is not sending ACK (can_id 0x305) every `1s` as specified by the protocol - canbus_link_timer: '5s' - canbus_extended_ack: 'false' # Set to 'true' for enable extended 29-bit IDs (required for Schneider XW Pro) + canbus_link_timer: '10s' # min 6s with Deye + # CAN setup + canbus_platform: 'esp32_can' # esp32_can / mcp2515 + canbus_node_id: 'canbus_inverter_1' # CAN bus node to which your inverter is connected + canbus_bitrate: '500kbps' # Default : 500kbps @@ -326,14 +311,17 @@ packages: # | >>> RS485 bus to Inverter # +------------------------------------------------------------------------------+ - # - path: 'packages/yambms/yambms_rs485_pylon.yaml' # yambms_rs485_pylon_web_server.yaml + # - path: 'packages/yambms/yambms_rs485.yaml' + # # - path: 'packages/yambms/yambms_rs485_web_server.yaml' # vars: - # rs485_id: '1' # Must be a number + # rs485_id: '1' # Must be a number # rs485_name: 'RS485 1' - # rs485_uart_id: 'uart_esp_3' # UART interface to which your inverter is connected - # rs485_uart_baud_rate: '9600' + # rs485_protocol: 'pylon' # pylon / voltronic # rs485_update_timeout: '10s' # rs485_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable + # # UART setup + # rs485_uart_id: 'uart_esp_3' # UART interface to which your inverter is connected + # rs485_uart_baud_rate: '9600' # Default : 9600 / Epever : 115200 diff --git a/YamBMS_RP_BMS_PACE_RS485_Modbus.yaml b/YamBMS_RP_BMS_PACE_RS485_Modbus.yaml index e9b69dd..05ec538 100644 --- a/YamBMS_RP_BMS_PACE_RS485_Modbus.yaml +++ b/YamBMS_RP_BMS_PACE_RS485_Modbus.yaml @@ -1,5 +1,5 @@ -# Updated : 2026.08.11 -# Version : 1.8.0 +# Updated : 2026.11.05 +# Version : 1.8.1 # GitHub : https://github.com/Sleeper85/esphome-yambms # YamBMS ( Yet another multi-BMS Merging Solution ) @@ -132,6 +132,16 @@ substitutions: { 60.0, 0.00 } } # +--------------------------------------+ + # | YamBMS services | + # +--------------------------------------+ + # Update service : checks GitHub for a newer YamBMS version. + # Telemetry service : sends anonymous data about your setup (BMS model, board, + # inverter protocol, YamBMS version). It is what tells me which hardware is + # actually in use, so I know where to spend my time. Public stats and details + # on what is collected : stats.yambms.org + yambms_update_service: 'true' # Set to false to disable update checks + yambms_telemetry_service: 'true' # Set to false to disable the sending of telemetry data + # +--------------------------------------+ # | Shunt Settings | # +--------------------------------------+ shunt_update_interval: '3s' # frequency at which Shunt data is refreshed @@ -220,33 +230,6 @@ packages: # | >>> Uncomment your interfaces and options # +------------------------------------------------------------------------------+ - # UART 1 (uart_id: uart_esp_1) - - path: 'packages/board/board_options_itf_uart_esp_1.yaml' - # UART 2 (uart_id: uart_esp_2) - # - path: 'packages/board/board_options_itf_uart_esp_2.yaml' - # UART 3 (uart_id: uart_esp_3) - # - path: 'packages/board/board_options_itf_uart_esp_3.yaml' - - # UART flow control - # - path: 'packages/board/board_options_itf_uart_flow_control.yaml' - # vars: - # uart_id: 'uart_esp_1' - # uart_flow_control_pin: ${talk_pin} - - # CAN transceiver - ESP32_CAN (TJA105x, SN65HVD230, M5Stack CAN base/unit) - - path: 'packages/board/board_options_itf_canbus_esp32_can.yaml' - vars: - # to bms = canbus_bms_1 - # to inverter = canbus_inverter_1 - canbus_node_id: 'canbus_inverter_1' - - # CAN transceiver - MCP2515 - # - path: 'packages/board/board_options_itf_canbus_mcp2515.yaml' - # vars: - # # to bms = canbus_bms_1 - # # to inverter = canbus_inverter_1 - # canbus_node_id: 'canbus_inverter_1' - # PSRAM octal 80Mhz # - path: 'packages/board/board_options_PSRAM_octal_80Mhz.yaml' @@ -310,12 +293,14 @@ packages: vars: canbus_id: '1' # must be a number canbus_name: 'CANBUS 1' - canbus_node_id: 'canbus_inverter_1' # CAN bus node to which your inverter is connected canbus_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable # CAN frames sending will be paused for `30s` if the inverter does not respond with an ACK (can_id 0x305) before the end of the `canbus_link_timer` (5s by default). canbus_link_timer_enabled: 'true' # Set it to 'false' if your inverter/charger is not sending ACK (can_id 0x305) every `1s` as specified by the protocol - canbus_link_timer: '5s' - canbus_extended_ack: 'false' # Set to 'true' for enable extended 29-bit IDs (required for Schneider XW Pro) + canbus_link_timer: '10s' # min 6s with Deye + # CAN setup + canbus_platform: 'esp32_can' # esp32_can / mcp2515 + canbus_node_id: 'canbus_inverter_1' # CAN bus node to which your inverter is connected + canbus_bitrate: '500kbps' # Default : 500kbps @@ -323,14 +308,17 @@ packages: # | >>> RS485 bus to Inverter # +------------------------------------------------------------------------------+ - # - path: 'packages/yambms/yambms_rs485_pylon.yaml' # yambms_rs485_pylon_web_server.yaml + # - path: 'packages/yambms/yambms_rs485.yaml' + # # - path: 'packages/yambms/yambms_rs485_web_server.yaml' # vars: - # rs485_id: '1' # Must be a number + # rs485_id: '1' # Must be a number # rs485_name: 'RS485 1' - # rs485_uart_id: 'uart_esp_3' # UART interface to which your inverter is connected - # rs485_uart_baud_rate: '9600' + # rs485_protocol: 'pylon' # pylon / voltronic # rs485_update_timeout: '10s' # rs485_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable + # # UART setup + # rs485_uart_id: 'uart_esp_3' # UART interface to which your inverter is connected + # rs485_uart_baud_rate: '9600' # Default : 9600 / Epever : 115200 diff --git a/YamBMS_RP_BMS_SEPLOS_V1_V2_RS485_Modbus.yaml b/YamBMS_RP_BMS_SEPLOS_V1_V2_RS485_Modbus.yaml index b9422a2..6418c22 100644 --- a/YamBMS_RP_BMS_SEPLOS_V1_V2_RS485_Modbus.yaml +++ b/YamBMS_RP_BMS_SEPLOS_V1_V2_RS485_Modbus.yaml @@ -1,5 +1,5 @@ -# Updated : 2026.08.11 -# Version : 1.8.0 +# Updated : 2026.11.05 +# Version : 1.8.1 # GitHub : https://github.com/Sleeper85/esphome-yambms # YamBMS ( Yet another multi-BMS Merging Solution ) @@ -132,6 +132,16 @@ substitutions: { 60.0, 0.00 } } # +--------------------------------------+ + # | YamBMS services | + # +--------------------------------------+ + # Update service : checks GitHub for a newer YamBMS version. + # Telemetry service : sends anonymous data about your setup (BMS model, board, + # inverter protocol, YamBMS version). It is what tells me which hardware is + # actually in use, so I know where to spend my time. Public stats and details + # on what is collected : stats.yambms.org + yambms_update_service: 'true' # Set to false to disable update checks + yambms_telemetry_service: 'true' # Set to false to disable the sending of telemetry data + # +--------------------------------------+ # | Shunt Settings | # +--------------------------------------+ shunt_update_interval: '3s' # frequency at which Shunt data is refreshed @@ -220,33 +230,6 @@ packages: # | >>> Uncomment your interfaces and options # +------------------------------------------------------------------------------+ - # UART 1 (uart_id: uart_esp_1) - - path: 'packages/board/board_options_itf_uart_esp_1.yaml' - # UART 2 (uart_id: uart_esp_2) - # - path: 'packages/board/board_options_itf_uart_esp_2.yaml' - # UART 3 (uart_id: uart_esp_3) - # - path: 'packages/board/board_options_itf_uart_esp_3.yaml' - - # UART flow control - # - path: 'packages/board/board_options_itf_uart_flow_control.yaml' - # vars: - # uart_id: 'uart_esp_1' - # uart_flow_control_pin: ${talk_pin} - - # CAN transceiver - ESP32_CAN (TJA105x, SN65HVD230, M5Stack CAN base/unit) - - path: 'packages/board/board_options_itf_canbus_esp32_can.yaml' - vars: - # to bms = canbus_bms_1 - # to inverter = canbus_inverter_1 - canbus_node_id: 'canbus_inverter_1' - - # CAN transceiver - MCP2515 - # - path: 'packages/board/board_options_itf_canbus_mcp2515.yaml' - # vars: - # # to bms = canbus_bms_1 - # # to inverter = canbus_inverter_1 - # canbus_node_id: 'canbus_inverter_1' - # PSRAM octal 80Mhz # - path: 'packages/board/board_options_PSRAM_octal_80Mhz.yaml' @@ -346,12 +329,14 @@ packages: vars: canbus_id: '1' # must be a number canbus_name: 'CANBUS 1' - canbus_node_id: 'canbus_inverter_1' # CAN bus node to which your inverter is connected canbus_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable # CAN frames sending will be paused for `30s` if the inverter does not respond with an ACK (can_id 0x305) before the end of the `canbus_link_timer` (5s by default). canbus_link_timer_enabled: 'true' # Set it to 'false' if your inverter/charger is not sending ACK (can_id 0x305) every `1s` as specified by the protocol - canbus_link_timer: '5s' - canbus_extended_ack: 'false' # Set to 'true' for enable extended 29-bit IDs (required for Schneider XW Pro) + canbus_link_timer: '10s' # min 6s with Deye + # CAN setup + canbus_platform: 'esp32_can' # esp32_can / mcp2515 + canbus_node_id: 'canbus_inverter_1' # CAN bus node to which your inverter is connected + canbus_bitrate: '500kbps' # Default : 500kbps @@ -359,14 +344,17 @@ packages: # | >>> RS485 bus to Inverter # +------------------------------------------------------------------------------+ - # - path: 'packages/yambms/yambms_rs485_pylon.yaml' # yambms_rs485_pylon_web_server.yaml + # - path: 'packages/yambms/yambms_rs485.yaml' + # # - path: 'packages/yambms/yambms_rs485_web_server.yaml' # vars: - # rs485_id: '1' # Must be a number + # rs485_id: '1' # Must be a number # rs485_name: 'RS485 1' - # rs485_uart_id: 'uart_esp_3' # UART interface to which your inverter is connected - # rs485_uart_baud_rate: '9600' + # rs485_protocol: 'pylon' # pylon / voltronic # rs485_update_timeout: '10s' # rs485_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable + # # UART setup + # rs485_uart_id: 'uart_esp_3' # UART interface to which your inverter is connected + # rs485_uart_baud_rate: '9600' # Default : 9600 / Epever : 115200 diff --git a/YamBMS_RP_BMS_SEPLOS_V3_RS485_Modbus_sniffer.yaml b/YamBMS_RP_BMS_SEPLOS_V3_RS485_Modbus_sniffer.yaml index 8acd8b9..489766a 100644 --- a/YamBMS_RP_BMS_SEPLOS_V3_RS485_Modbus_sniffer.yaml +++ b/YamBMS_RP_BMS_SEPLOS_V3_RS485_Modbus_sniffer.yaml @@ -1,5 +1,5 @@ -# Updated : 2026.08.11 -# Version : 1.8.0 +# Updated : 2026.11.05 +# Version : 1.8.1 # GitHub : https://github.com/Sleeper85/esphome-yambms # YamBMS ( Yet another multi-BMS Merging Solution ) @@ -132,6 +132,16 @@ substitutions: { 60.0, 0.00 } } # +--------------------------------------+ + # | YamBMS services | + # +--------------------------------------+ + # Update service : checks GitHub for a newer YamBMS version. + # Telemetry service : sends anonymous data about your setup (BMS model, board, + # inverter protocol, YamBMS version). It is what tells me which hardware is + # actually in use, so I know where to spend my time. Public stats and details + # on what is collected : stats.yambms.org + yambms_update_service: 'true' # Set to false to disable update checks + yambms_telemetry_service: 'true' # Set to false to disable the sending of telemetry data + # +--------------------------------------+ # | Shunt Settings | # +--------------------------------------+ shunt_update_interval: '3s' # frequency at which Shunt data is refreshed @@ -220,33 +230,6 @@ packages: # | >>> Uncomment your interfaces and options # +------------------------------------------------------------------------------+ - # UART 1 (uart_id: uart_esp_1) - - path: 'packages/board/board_options_itf_uart_esp_1.yaml' - # UART 2 (uart_id: uart_esp_2) - # - path: 'packages/board/board_options_itf_uart_esp_2.yaml' - # UART 3 (uart_id: uart_esp_3) - # - path: 'packages/board/board_options_itf_uart_esp_3.yaml' - - # UART flow control - # - path: 'packages/board/board_options_itf_uart_flow_control.yaml' - # vars: - # uart_id: 'uart_esp_1' - # uart_flow_control_pin: ${talk_pin} - - # CAN transceiver - ESP32_CAN (TJA105x, SN65HVD230, M5Stack CAN base/unit) - - path: 'packages/board/board_options_itf_canbus_esp32_can.yaml' - vars: - # to bms = canbus_bms_1 - # to inverter = canbus_inverter_1 - canbus_node_id: 'canbus_inverter_1' - - # CAN transceiver - MCP2515 - # - path: 'packages/board/board_options_itf_canbus_mcp2515.yaml' - # vars: - # # to bms = canbus_bms_1 - # # to inverter = canbus_inverter_1 - # canbus_node_id: 'canbus_inverter_1' - # PSRAM octal 80Mhz # - path: 'packages/board/board_options_PSRAM_octal_80Mhz.yaml' @@ -345,12 +328,14 @@ packages: vars: canbus_id: '1' # must be a number canbus_name: 'CANBUS 1' - canbus_node_id: 'canbus_inverter_1' # CAN bus node to which your inverter is connected canbus_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable # CAN frames sending will be paused for `30s` if the inverter does not respond with an ACK (can_id 0x305) before the end of the `canbus_link_timer` (5s by default). canbus_link_timer_enabled: 'true' # Set it to 'false' if your inverter/charger is not sending ACK (can_id 0x305) every `1s` as specified by the protocol - canbus_link_timer: '5s' - canbus_extended_ack: 'false' # Set to 'true' for enable extended 29-bit IDs (required for Schneider XW Pro) + canbus_link_timer: '10s' # min 6s with Deye + # CAN setup + canbus_platform: 'esp32_can' # esp32_can / mcp2515 + canbus_node_id: 'canbus_inverter_1' # CAN bus node to which your inverter is connected + canbus_bitrate: '500kbps' # Default : 500kbps @@ -358,14 +343,17 @@ packages: # | >>> RS485 bus to Inverter # +------------------------------------------------------------------------------+ - # - path: 'packages/yambms/yambms_rs485_pylon.yaml' # yambms_rs485_pylon_web_server.yaml + # - path: 'packages/yambms/yambms_rs485.yaml' + # # - path: 'packages/yambms/yambms_rs485_web_server.yaml' # vars: - # rs485_id: '1' # Must be a number + # rs485_id: '1' # Must be a number # rs485_name: 'RS485 1' - # rs485_uart_id: 'uart_esp_3' # UART interface to which your inverter is connected - # rs485_uart_baud_rate: '9600' + # rs485_protocol: 'pylon' # pylon / voltronic # rs485_update_timeout: '10s' # rs485_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable + # # UART setup + # rs485_uart_id: 'uart_esp_3' # UART interface to which your inverter is connected + # rs485_uart_baud_rate: '9600' # Default : 9600 / Epever : 115200 diff --git a/YamBMS_RP_Balancer.yaml b/YamBMS_RP_Balancer.yaml index be3c693..5cacfb8 100644 --- a/YamBMS_RP_Balancer.yaml +++ b/YamBMS_RP_Balancer.yaml @@ -1,5 +1,5 @@ -# Updated : 2026.08.11 -# Version : 1.8.0 +# Updated : 2026.11.05 +# Version : 1.8.1 # GitHub : https://github.com/Sleeper85/esphome-yambms # YamBMS ( Yet another multi-BMS Merging Solution ) @@ -132,6 +132,16 @@ substitutions: { 60.0, 0.00 } } # +--------------------------------------+ + # | YamBMS services | + # +--------------------------------------+ + # Update service : checks GitHub for a newer YamBMS version. + # Telemetry service : sends anonymous data about your setup (BMS model, board, + # inverter protocol, YamBMS version). It is what tells me which hardware is + # actually in use, so I know where to spend my time. Public stats and details + # on what is collected : stats.yambms.org + yambms_update_service: 'true' # Set to false to disable update checks + yambms_telemetry_service: 'true' # Set to false to disable the sending of telemetry data + # +--------------------------------------+ # | Shunt Settings | # +--------------------------------------+ shunt_update_interval: '3s' # frequency at which Shunt data is refreshed @@ -220,33 +230,6 @@ packages: # | >>> Uncomment your interfaces and options # +------------------------------------------------------------------------------+ - # UART 1 (uart_id: uart_esp_1) - - path: 'packages/board/board_options_itf_uart_esp_1.yaml' - # UART 2 (uart_id: uart_esp_2) - # - path: 'packages/board/board_options_itf_uart_esp_2.yaml' - # UART 3 (uart_id: uart_esp_3) - # - path: 'packages/board/board_options_itf_uart_esp_3.yaml' - - # UART flow control - # - path: 'packages/board/board_options_itf_uart_flow_control.yaml' - # vars: - # uart_id: 'uart_esp_1' - # uart_flow_control_pin: ${talk_pin} - - # CAN transceiver - ESP32_CAN (TJA105x, SN65HVD230, M5Stack CAN base/unit) - - path: 'packages/board/board_options_itf_canbus_esp32_can.yaml' - vars: - # to bms = canbus_bms_1 - # to inverter = canbus_inverter_1 - canbus_node_id: 'canbus_inverter_1' - - # CAN transceiver - MCP2515 - # - path: 'packages/board/board_options_itf_canbus_mcp2515.yaml' - # vars: - # # to bms = canbus_bms_1 - # # to inverter = canbus_inverter_1 - # canbus_node_id: 'canbus_inverter_1' - # PSRAM octal 80Mhz # - path: 'packages/board/board_options_PSRAM_octal_80Mhz.yaml' @@ -328,12 +311,14 @@ packages: vars: canbus_id: '1' # must be a number canbus_name: 'CANBUS 1' - canbus_node_id: 'canbus_inverter_1' # CAN bus node to which your inverter is connected canbus_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable # CAN frames sending will be paused for `30s` if the inverter does not respond with an ACK (can_id 0x305) before the end of the `canbus_link_timer` (5s by default). canbus_link_timer_enabled: 'true' # Set it to 'false' if your inverter/charger is not sending ACK (can_id 0x305) every `1s` as specified by the protocol - canbus_link_timer: '5s' - canbus_extended_ack: 'false' # Set to 'true' for enable extended 29-bit IDs (required for Schneider XW Pro) + canbus_link_timer: '10s' # min 6s with Deye + # CAN setup + canbus_platform: 'esp32_can' # esp32_can / mcp2515 + canbus_node_id: 'canbus_inverter_1' # CAN bus node to which your inverter is connected + canbus_bitrate: '500kbps' # Default : 500kbps @@ -341,14 +326,17 @@ packages: # | >>> RS485 bus to Inverter # +------------------------------------------------------------------------------+ - # - path: 'packages/yambms/yambms_rs485_pylon.yaml' # yambms_rs485_pylon_web_server.yaml + # - path: 'packages/yambms/yambms_rs485.yaml' + # # - path: 'packages/yambms/yambms_rs485_web_server.yaml' # vars: - # rs485_id: '1' # Must be a number + # rs485_id: '1' # Must be a number # rs485_name: 'RS485 1' - # rs485_uart_id: 'uart_esp_3' # UART interface to which your inverter is connected - # rs485_uart_baud_rate: '9600' + # rs485_protocol: 'pylon' # pylon / voltronic # rs485_update_timeout: '10s' # rs485_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable + # # UART setup + # rs485_uart_id: 'uart_esp_3' # UART interface to which your inverter is connected + # rs485_uart_baud_rate: '9600' # Default : 9600 / Epever : 115200 diff --git a/YamBMS_RP_DEMO.yaml b/YamBMS_RP_DEMO.yaml index b53e5ad..5e5d386 100644 --- a/YamBMS_RP_DEMO.yaml +++ b/YamBMS_RP_DEMO.yaml @@ -1,5 +1,5 @@ -# Updated : 2026.08.11 -# Version : 1.8.0 +# Updated : 2026.11.05 +# Version : 1.8.1 # GitHub : https://github.com/Sleeper85/esphome-yambms # YamBMS ( Yet another multi-BMS Merging Solution ) @@ -132,6 +132,16 @@ substitutions: { 60.0, 0.00 } } # +--------------------------------------+ + # | YamBMS services | + # +--------------------------------------+ + # Update service : checks GitHub for a newer YamBMS version. + # Telemetry service : sends anonymous data about your setup (BMS model, board, + # inverter protocol, YamBMS version). It is what tells me which hardware is + # actually in use, so I know where to spend my time. Public stats and details + # on what is collected : stats.yambms.org + yambms_update_service: 'true' # Set to false to disable update checks + yambms_telemetry_service: 'true' # Set to false to disable the sending of telemetry data + # +--------------------------------------+ # | Shunt Settings | # +--------------------------------------+ shunt_update_interval: '3s' # frequency at which Shunt data is refreshed @@ -220,33 +230,6 @@ packages: # | >>> Uncomment your interfaces and options # +------------------------------------------------------------------------------+ - # UART 1 (uart_id: uart_esp_1) - # - path: 'packages/board/board_options_itf_uart_esp_1.yaml' - # UART 2 (uart_id: uart_esp_2) - # - path: 'packages/board/board_options_itf_uart_esp_2.yaml' - # UART 3 (uart_id: uart_esp_3) - # - path: 'packages/board/board_options_itf_uart_esp_3.yaml' - - # UART flow control - # - path: 'packages/board/board_options_itf_uart_flow_control.yaml' - # vars: - # uart_id: 'uart_esp_1' - # uart_flow_control_pin: ${talk_pin} - - # CAN transceiver - ESP32_CAN (TJA105x, SN65HVD230, M5Stack CAN base/unit) - - path: 'packages/board/board_options_itf_canbus_esp32_can.yaml' - vars: - # to bms = canbus_bms_1 - # to inverter = canbus_inverter_1 - canbus_node_id: 'canbus_inverter_1' - - # CAN transceiver - MCP2515 - # - path: 'packages/board/board_options_itf_canbus_mcp2515.yaml' - # vars: - # # to bms = canbus_bms_1 - # # to inverter = canbus_inverter_1 - # canbus_node_id: 'canbus_inverter_1' - # PSRAM octal 80Mhz # - path: 'packages/board/board_options_PSRAM_octal_80Mhz.yaml' @@ -360,12 +343,14 @@ packages: vars: canbus_id: '1' # must be a number canbus_name: 'CANBUS 1' - canbus_node_id: 'canbus_inverter_1' # CAN bus node to which your inverter is connected canbus_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable # CAN frames sending will be paused for `30s` if the inverter does not respond with an ACK (can_id 0x305) before the end of the `canbus_link_timer` (5s by default). canbus_link_timer_enabled: 'true' # Set it to 'false' if your inverter/charger is not sending ACK (can_id 0x305) every `1s` as specified by the protocol - canbus_link_timer: '5s' - canbus_extended_ack: 'false' # Set to 'true' for enable extended 29-bit IDs (required for Schneider XW Pro) + canbus_link_timer: '10s' # min 6s with Deye + # CAN setup + canbus_platform: 'esp32_can' # esp32_can / mcp2515 + canbus_node_id: 'canbus_inverter_1' # CAN bus node to which your inverter is connected + canbus_bitrate: '500kbps' # Default : 500kbps @@ -373,14 +358,17 @@ packages: # | >>> RS485 bus to Inverter # +------------------------------------------------------------------------------+ - # - path: 'packages/yambms/yambms_rs485_pylon.yaml' # yambms_rs485_pylon_web_server.yaml + # - path: 'packages/yambms/yambms_rs485.yaml' + # # - path: 'packages/yambms/yambms_rs485_web_server.yaml' # vars: - # rs485_id: '1' # Must be a number + # rs485_id: '1' # Must be a number # rs485_name: 'RS485 1' - # rs485_uart_id: 'uart_esp_3' # UART interface to which your inverter is connected - # rs485_uart_baud_rate: '9600' + # rs485_protocol: 'pylon' # pylon / voltronic # rs485_update_timeout: '10s' # rs485_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable + # # UART setup + # rs485_uart_id: 'uart_esp_3' # UART interface to which your inverter is connected + # rs485_uart_baud_rate: '9600' # Default : 9600 / Epever : 115200 diff --git a/YamBMS_RP_Ethernet_board.yaml b/YamBMS_RP_Ethernet_board.yaml index 98bb265..42f657c 100644 --- a/YamBMS_RP_Ethernet_board.yaml +++ b/YamBMS_RP_Ethernet_board.yaml @@ -1,5 +1,5 @@ -# Updated : 2026.08.11 -# Version : 1.8.0 +# Updated : 2026.11.05 +# Version : 1.8.1 # GitHub : https://github.com/Sleeper85/esphome-yambms # YamBMS ( Yet another multi-BMS Merging Solution ) @@ -132,6 +132,16 @@ substitutions: { 60.0, 0.00 } } # +--------------------------------------+ + # | YamBMS services | + # +--------------------------------------+ + # Update service : checks GitHub for a newer YamBMS version. + # Telemetry service : sends anonymous data about your setup (BMS model, board, + # inverter protocol, YamBMS version). It is what tells me which hardware is + # actually in use, so I know where to spend my time. Public stats and details + # on what is collected : stats.yambms.org + yambms_update_service: 'true' # Set to false to disable update checks + yambms_telemetry_service: 'true' # Set to false to disable the sending of telemetry data + # +--------------------------------------+ # | Shunt Settings | # +--------------------------------------+ shunt_update_interval: '3s' # frequency at which Shunt data is refreshed @@ -187,33 +197,6 @@ packages: # | >>> Uncomment your interfaces and options # +------------------------------------------------------------------------------+ - # UART 1 (uart_id: uart_esp_1) - - path: 'packages/board/board_options_itf_uart_esp_1.yaml' - # UART 2 (uart_id: uart_esp_2) - # - path: 'packages/board/board_options_itf_uart_esp_2.yaml' - # UART 3 (uart_id: uart_esp_3) - # - path: 'packages/board/board_options_itf_uart_esp_3.yaml' - - # UART flow control - # - path: 'packages/board/board_options_itf_uart_flow_control.yaml' - # vars: - # uart_id: 'uart_esp_1' - # uart_flow_control_pin: ${talk_pin} - - # CAN transceiver - ESP32_CAN (TJA105x, SN65HVD230, M5Stack CAN base/unit) - - path: 'packages/board/board_options_itf_canbus_esp32_can.yaml' - vars: - # to bms = canbus_bms_1 - # to inverter = canbus_inverter_1 - canbus_node_id: 'canbus_inverter_1' - - # CAN transceiver - MCP2515 - # - path: 'packages/board/board_options_itf_canbus_mcp2515.yaml' - # vars: - # # to bms = canbus_bms_1 - # # to inverter = canbus_inverter_1 - # canbus_node_id: 'canbus_inverter_1' - # PSRAM octal 80Mhz # - path: 'packages/board/board_options_PSRAM_octal_80Mhz.yaml' @@ -257,12 +240,14 @@ packages: vars: canbus_id: '1' # must be a number canbus_name: 'CANBUS 1' - canbus_node_id: 'canbus_inverter_1' # CAN bus node to which your inverter is connected canbus_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable # CAN frames sending will be paused for `30s` if the inverter does not respond with an ACK (can_id 0x305) before the end of the `canbus_link_timer` (5s by default). canbus_link_timer_enabled: 'true' # Set it to 'false' if your inverter/charger is not sending ACK (can_id 0x305) every `1s` as specified by the protocol - canbus_link_timer: '5s' - canbus_extended_ack: 'false' # Set to 'true' for enable extended 29-bit IDs (required for Schneider XW Pro) + canbus_link_timer: '10s' # min 6s with Deye + # CAN setup + canbus_platform: 'esp32_can' # esp32_can / mcp2515 + canbus_node_id: 'canbus_inverter_1' # CAN bus node to which your inverter is connected + canbus_bitrate: '500kbps' # Default : 500kbps @@ -270,14 +255,17 @@ packages: # | >>> RS485 bus to Inverter # +------------------------------------------------------------------------------+ - # - path: 'packages/yambms/yambms_rs485_pylon.yaml' # yambms_rs485_pylon_web_server.yaml + # - path: 'packages/yambms/yambms_rs485.yaml' + # # - path: 'packages/yambms/yambms_rs485_web_server.yaml' # vars: - # rs485_id: '1' # Must be a number + # rs485_id: '1' # Must be a number # rs485_name: 'RS485 1' - # rs485_uart_id: 'uart_esp_3' # UART interface to which your inverter is connected - # rs485_uart_baud_rate: '9600' + # rs485_protocol: 'pylon' # pylon / voltronic # rs485_update_timeout: '10s' # rs485_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable + # # UART setup + # rs485_uart_id: 'uart_esp_3' # UART interface to which your inverter is connected + # rs485_uart_baud_rate: '9600' # Default : 9600 / Epever : 115200 diff --git a/YamBMS_RP_HA_Display.yaml b/YamBMS_RP_HA_Display.yaml index 46d1902..6ab71c3 100644 --- a/YamBMS_RP_HA_Display.yaml +++ b/YamBMS_RP_HA_Display.yaml @@ -1,5 +1,5 @@ -# Updated : 2026.09.11 -# Version : 1.8.0 +# Updated : 2026.11.05 +# Version : 1.8.1 # GitHub : https://github.com/Sleeper85/esphome-yambms # YamBMS ( Yet another multi-BMS Merging Solution ) @@ -144,33 +144,6 @@ packages: # | >>> Uncomment your interfaces and options # +------------------------------------------------------------------------------+ - # UART 1 (uart_id: uart_esp_1) - # - path: 'packages/board/board_options_itf_uart_esp_1.yaml' - # UART 2 (uart_id: uart_esp_2) - # - path: 'packages/board/board_options_itf_uart_esp_2.yaml' - # UART 3 (uart_id: uart_esp_3) - # - path: 'packages/board/board_options_itf_uart_esp_3.yaml' - - # UART flow control - # - path: 'packages/board/board_options_itf_uart_flow_control.yaml' - # vars: - # uart_id: 'uart_esp_1' - # uart_flow_control_pin: ${talk_pin} - - # CAN transceiver - ESP32_CAN (TJA105x, SN65HVD230, M5Stack CAN base/unit) - # - path: 'packages/board/board_options_itf_canbus_esp32_can.yaml' - # vars: - # # to bms = canbus_bms_1 - # # to inverter = canbus_inverter_1 - # canbus_node_id: 'canbus_inverter_1' - - # CAN transceiver - MCP2515 - # - path: 'packages/board/board_options_itf_canbus_mcp2515.yaml' - # vars: - # # to bms = canbus_bms_1 - # # to inverter = canbus_inverter_1 - # canbus_node_id: 'canbus_inverter_1' - # PSRAM octal 80Mhz # - path: 'packages/board/board_options_PSRAM_octal_80Mhz.yaml' diff --git a/YamBMS_RP_PVbrain2.yaml b/YamBMS_RP_PVbrain2.yaml index 1eec8c0..b7e1c7b 100644 --- a/YamBMS_RP_PVbrain2.yaml +++ b/YamBMS_RP_PVbrain2.yaml @@ -1,5 +1,5 @@ -# Updated : 2026.08.27 -# Version : 1.8.0 +# Updated : 2026.11.05 +# Version : 1.8.1 # GitHub : https://github.com/Sleeper85/esphome-yambms # YamBMS ( Yet another multi-BMS Merging Solution ) @@ -133,6 +133,16 @@ substitutions: { 60.0, 0.00 } } # +--------------------------------------+ + # | YamBMS services | + # +--------------------------------------+ + # Update service : checks GitHub for a newer YamBMS version. + # Telemetry service : sends anonymous data about your setup (BMS model, board, + # inverter protocol, YamBMS version). It is what tells me which hardware is + # actually in use, so I know where to spend my time. Public stats and details + # on what is collected : stats.yambms.org + yambms_update_service: 'true' # Set to false to disable update checks + yambms_telemetry_service: 'true' # Set to false to disable the sending of telemetry data + # +--------------------------------------+ # | Shunt Settings | # +--------------------------------------+ shunt_update_interval: '3s' # frequency at which Shunt data is refreshed @@ -161,14 +171,14 @@ substitutions: # +--------------------------------------+ # | UART expander WK2168 | # +--------------------------------------+ - uart0_baudrate: '2400' # uart_id : uart_${uart_hub_bus}_0 WKS {RJ45-UART0} - uart1_baudrate: '38400' # uart_id : uart_${uart_hub_bus}_1 JSY193 - uart2_baudrate: '19200' # uart_id : uart_${uart_hub_bus}_2 SmartShunt - uart3_baudrate: '9600' # uart_id : uart_${uart_hub_bus}_3 SRNE {RJ45-UART3} - uart4_baudrate: '115200' # uart_id : uart_${uart_hub_bus}_4 JK-BMS 1 - uart5_baudrate: '115200' # uart_id : uart_${uart_hub_bus}_5 JK-BMS 2 - uart6_baudrate: '115200' # uart_id : uart_${uart_hub_bus}_6 Pylontech - uart7_baudrate: '9600' # uart_id : uart_${uart_hub_bus}_7 EPEVER {RJ45-UART7} + # uart_spi_0 : 2400 WKS {RJ45-UART0} + # uart_spi_1 : 38400 JSY193 + # uart_spi_2 : 19200 SmartShunt + # uart_spi_3 : 9600 SRNE {RJ45-UART3} + # uart_spi_4 : 115200 JK-BMS 1 + # uart_spi_5 : 115200 JK-BMS 2 + # uart_spi_6 : 115200 Pylontech + # uart_spi_7 : 9600 EPEVER {RJ45-UART7} @@ -199,53 +209,32 @@ packages: # | >>> Uncomment your interfaces and options # +------------------------------------------------------------------------------+ - # UART 1 (uart_id: uart_esp_1) - # - path: 'packages/board/board_options_itf_uart_esp_1.yaml' - # UART 2 (uart_id: uart_esp_2) - # - path: 'packages/board/board_options_itf_uart_esp_2.yaml' - # UART 3 (uart_id: uart_esp_3) - # - path: 'packages/board/board_options_itf_uart_esp_3.yaml' - # BUS # - path: 'packages/board/board_options_itf_bus_spi.yaml' # SPI bus # - path: 'packages/board/board_options_itf_bus_i2c.yaml' # I2C bus for SX1509 and BME280/BMP280 # - path: 'packages/board/board_options_itf_bus_one_wire.yaml' # One wire bus for Dallas Temperature Sensor + # WK2168 UART/IO Expander + - path: 'packages/board/board_options_itf_wk2168_spi.yaml' + # - path: 'packages/board/board_options_itf_wk2168_i2c.yaml' + # Modbus 1 - # - path: 'packages/board/board_options_itf_modbus_expander.yaml' + # - path: 'packages/board/board_options_itf_modbus.yaml' # vars: # modbus_id: '1' # can be a number or text or a mixture of both, e.g. full id = modbus_client_1 # modbus_role: 'client' # client / server - # modbus_uart_id: 'uart_${uart_hub_bus}_1' + # modbus_uart_id: 'uart_spi_1' # Modbus 2 - # - path: 'packages/board/board_options_itf_modbus_expander.yaml' + # - path: 'packages/board/board_options_itf_modbus.yaml' # vars: # modbus_id: '2' # can be a number or text or a mixture of both, e.g. full id = modbus_client_2 # modbus_role: 'client' # client / server - # modbus_uart_id: 'uart_${uart_hub_bus}_2' - - # WK2168 UART/IO Expander - - path: 'packages/board/board_options_itf_pvbrain2_wk2168_spi.yaml' - # - path: 'packages/board/board_options_itf_pvbrain2_wk2168_i2c.yaml' + # modbus_uart_id: 'uart_spi_2' # SX1509 16 channel I/O Expander # - path: 'packages/board/board_options_itf_pvbrain2_sx1509.yaml' - # CAN transceiver - ESP32_CAN (TJA105x, SN65HVD230, M5Stack CAN base/unit) - - path: 'packages/board/board_options_itf_canbus_esp32_can.yaml' - vars: - # to bms = canbus_bms_1 - # to inverter = canbus_inverter_1 - canbus_node_id: 'canbus_inverter_1' - - # CAN transceiver - SPI bus and MCP2515 - # - path: 'packages/board/board_options_itf_canbus_mcp2515.yaml' - # vars: - # # to bms = canbus_bms_1 - # # to inverter = canbus_inverter_1 - # canbus_node_id: 'canbus_inverter_1' - # PSRAM octal 80Mhz - path: 'packages/board/board_options_PSRAM_octal_80Mhz.yaml' @@ -291,12 +280,14 @@ packages: vars: canbus_id: '1' # must be a number canbus_name: 'CANBUS 1' - canbus_node_id: 'canbus_inverter_1' # CAN bus node to which your inverter is connected canbus_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable # CAN frames sending will be paused for `30s` if the inverter does not respond with an ACK (can_id 0x305) before the end of the `canbus_link_timer` (5s by default). canbus_link_timer_enabled: 'true' # Set it to 'false' if your inverter/charger is not sending ACK (can_id 0x305) every `1s` as specified by the protocol - canbus_link_timer: '5s' - canbus_extended_ack: 'false' # Set to 'true' for enable extended 29-bit IDs (required for Schneider XW Pro) + canbus_link_timer: '10s' # min 6s with Deye + # CAN setup + canbus_platform: 'esp32_can' # esp32_can / mcp2515 + canbus_node_id: 'canbus_inverter_1' # CAN bus node to which your inverter is connected + canbus_bitrate: '500kbps' # Default : 500kbps @@ -304,14 +295,17 @@ packages: # | >>> RS485 bus to Inverter # +------------------------------------------------------------------------------+ - # - path: 'packages/yambms/yambms_rs485_pylon_core.yaml' + # - path: 'packages/yambms/yambms_rs485.yaml' + # # - path: 'packages/yambms/yambms_rs485_web_server.yaml' # vars: - # rs485_id: '1' # Must be a number + # rs485_id: '1' # Must be a number # rs485_name: 'RS485 1' - # rs485_uart_id: 'uart_${uart_hub_bus}_3' # UART interface to which your inverter is connected - # rs485_uart_baud_rate: '9600' + # rs485_protocol: 'pylon' # pylon / voltronic # rs485_update_timeout: '10s' # rs485_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable + # # UART setup + # rs485_uart_id: 'uart_spi_3' # UART interface to which your inverter is connected + # rs485_uart_baud_rate: '9600' # Default : 9600 / Epever : 115200 diff --git a/YamBMS_RP_RPi_Pico_Shunts_modbus_server.yaml b/YamBMS_RP_RPi_Pico_Shunts_modbus_server.yaml index f797167..754ae36 100644 --- a/YamBMS_RP_RPi_Pico_Shunts_modbus_server.yaml +++ b/YamBMS_RP_RPi_Pico_Shunts_modbus_server.yaml @@ -1,5 +1,5 @@ -# Updated : 2026.08.11 -# Version : 1.8.0 +# Updated : 2026.11.05 +# Version : 1.8.1 # GitHub : https://github.com/Sleeper85/esphome-yambms # YamBMS ( Yet another multi-BMS Merging Solution ) @@ -68,14 +68,6 @@ packages: # server_status_led_id: 'virtual_status_light' # led used to show status. Default = esp_light, set specific led or set to 'virtual_status_light' to disable # network_status_led_id: 'virtual_status_light' # led used to show status. Default = esp_light, set specific led or set to 'virtual_status_light' to disable - # uart - - path: packages/board/board_options_itf_uart_1.yaml - - path: packages/board/board_options_itf_uart_2.yaml - - path: packages/board/board_options_itf_uart_3.yaml - - path: packages/board/board_options_itf_uart_4.yaml - - path: packages/board/board_options_itf_uart_5.yaml - - path: packages/board/board_options_itf_uart_6.yaml - # modbus - path: packages/board/board_options_itf_modbus.yaml vars: diff --git a/YamBMS_Remote_Packages_example.yaml b/YamBMS_Remote_Packages_example.yaml index 772056d..2656855 100644 --- a/YamBMS_Remote_Packages_example.yaml +++ b/YamBMS_Remote_Packages_example.yaml @@ -1,5 +1,5 @@ -# Updated : 2026.07.30 -# Version : 1.7.1 +# Updated : 2026.11.05 +# Version : 1.8.1 # GitHub : https://github.com/Sleeper85/esphome-yambms # YamBMS ( Yet another multi-BMS Merging Solution ) @@ -132,6 +132,16 @@ substitutions: { 60.0, 0.00 } } # +--------------------------------------+ + # | YamBMS services | + # +--------------------------------------+ + # Update service : checks GitHub for a newer YamBMS version. + # Telemetry service : sends anonymous data about your setup (BMS model, board, + # inverter protocol, YamBMS version). It is what tells me which hardware is + # actually in use, so I know where to spend my time. Public stats and details + # on what is collected : stats.yambms.org + yambms_update_service: 'true' # Set to false to disable update checks + yambms_telemetry_service: 'true' # Set to false to disable the sending of telemetry data + # +--------------------------------------+ # | Shunt Settings | # +--------------------------------------+ shunt_update_interval: '3s' # frequency at which Shunt data is refreshed @@ -220,33 +230,6 @@ packages: # | >>> Uncomment your interfaces and options # +------------------------------------------------------------------------------+ - # UART 1 (uart_id: uart_esp_1) - - path: 'packages/board/board_options_itf_uart_esp_1.yaml' - # UART 2 (uart_id: uart_esp_2) - # - path: 'packages/board/board_options_itf_uart_esp_2.yaml' - # UART 3 (uart_id: uart_esp_3) - # - path: 'packages/board/board_options_itf_uart_esp_3.yaml' - - # UART flow control - # - path: 'packages/board/board_options_itf_uart_flow_control.yaml' - # vars: - # uart_id: 'uart_esp_1' - # uart_flow_control_pin: ${talk_pin} - - # CAN transceiver - ESP32_CAN (TJA105x, SN65HVD230, M5Stack CAN base/unit) - - path: 'packages/board/board_options_itf_canbus_esp32_can.yaml' - vars: - # to bms = canbus_bms_1 - # to inverter = canbus_inverter_1 - canbus_node_id: 'canbus_inverter_1' - - # CAN transceiver - MCP2515 - # - path: 'packages/board/board_options_itf_canbus_mcp2515.yaml' - # vars: - # # to bms = canbus_bms_1 - # # to inverter = canbus_inverter_1 - # canbus_node_id: 'canbus_inverter_1' - # PSRAM octal 80Mhz # - path: 'packages/board/board_options_PSRAM_octal_80Mhz.yaml' @@ -290,12 +273,14 @@ packages: vars: canbus_id: '1' # must be a number canbus_name: 'CANBUS 1' - canbus_node_id: 'canbus_inverter_1' # CAN bus node to which your inverter is connected canbus_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable # CAN frames sending will be paused for `30s` if the inverter does not respond with an ACK (can_id 0x305) before the end of the `canbus_link_timer` (5s by default). canbus_link_timer_enabled: 'true' # Set it to 'false' if your inverter/charger is not sending ACK (can_id 0x305) every `1s` as specified by the protocol - canbus_link_timer: '5s' - canbus_extended_ack: 'false' # Set to 'true' for enable extended 29-bit IDs (required for Schneider XW Pro) + canbus_link_timer: '10s' # min 6s with Deye + # CAN setup + canbus_platform: 'esp32_can' # esp32_can / mcp2515 + canbus_node_id: 'canbus_inverter_1' # CAN bus node to which your inverter is connected + canbus_bitrate: '500kbps' # Default : 500kbps @@ -303,14 +288,20 @@ packages: # | >>> RS485 bus to Inverter # +------------------------------------------------------------------------------+ - # - path: 'packages/yambms/yambms_rs485_pylon.yaml' # yambms_rs485_pylon_web_server.yaml + # - path: 'packages/yambms/yambms_rs485.yaml' + # # - path: 'packages/yambms/yambms_rs485_web_server.yaml' # vars: - # rs485_id: '1' # Must be a number + # rs485_id: '1' # Must be a number # rs485_name: 'RS485 1' - # rs485_uart_id: 'uart_esp_3' # UART interface to which your inverter is connected - # rs485_uart_baud_rate: '9600' + # rs485_protocol: 'pylon' # pylon / voltronic # rs485_update_timeout: '10s' # rs485_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable + # # UART setup + # rs485_uart_id: 'uart_esp_3' # UART interface to which your inverter is connected + # # ESP32 : uart_esp_1 to uart_esp_3 + # # WK2168 : uart_spi_0 to uart_spi_7 / uart_i2c_0 to uart_i2c_7 + # rs485_uart_baud_rate: '9600' # Default : 9600 / Epever : 115200 + # +------------------------------------------------------------------------------+ diff --git a/YamBMS_Remote_Packages_example_dev_branch.yaml b/YamBMS_Remote_Packages_example_dev_branch.yaml index dfff822..a76a580 100644 --- a/YamBMS_Remote_Packages_example_dev_branch.yaml +++ b/YamBMS_Remote_Packages_example_dev_branch.yaml @@ -1,5 +1,5 @@ -# Updated : 2026.07.30 -# Version : 1.7.1 +# Updated : 2026.11.05 +# Version : 1.8.1 # GitHub : https://github.com/Sleeper85/esphome-yambms # YamBMS ( Yet another multi-BMS Merging Solution ) @@ -132,6 +132,16 @@ substitutions: { 60.0, 0.00 } } # +--------------------------------------+ + # | YamBMS services | + # +--------------------------------------+ + # Update service : checks GitHub for a newer YamBMS version. + # Telemetry service : sends anonymous data about your setup (BMS model, board, + # inverter protocol, YamBMS version). It is what tells me which hardware is + # actually in use, so I know where to spend my time. Public stats and details + # on what is collected : stats.yambms.org + yambms_update_service: 'true' # Set to false to disable update checks + yambms_telemetry_service: 'true' # Set to false to disable the sending of telemetry data + # +--------------------------------------+ # | Shunt Settings | # +--------------------------------------+ shunt_update_interval: '3s' # frequency at which Shunt data is refreshed @@ -220,33 +230,6 @@ packages: # | >>> Uncomment your interfaces and options # +------------------------------------------------------------------------------+ - # UART 1 (uart_id: uart_esp_1) - - path: 'packages/board/board_options_itf_uart_esp_1.yaml' - # UART 2 (uart_id: uart_esp_2) - # - path: 'packages/board/board_options_itf_uart_esp_2.yaml' - # UART 3 (uart_id: uart_esp_3) - # - path: 'packages/board/board_options_itf_uart_esp_3.yaml' - - # UART flow control - # - path: 'packages/board/board_options_itf_uart_flow_control.yaml' - # vars: - # uart_id: 'uart_esp_1' - # uart_flow_control_pin: ${talk_pin} - - # CAN transceiver - ESP32_CAN (TJA105x, SN65HVD230, M5Stack CAN base/unit) - - path: 'packages/board/board_options_itf_canbus_esp32_can.yaml' - vars: - # to bms = canbus_bms_1 - # to inverter = canbus_inverter_1 - canbus_node_id: 'canbus_inverter_1' - - # CAN transceiver - MCP2515 - # - path: 'packages/board/board_options_itf_canbus_mcp2515.yaml' - # vars: - # # to bms = canbus_bms_1 - # # to inverter = canbus_inverter_1 - # canbus_node_id: 'canbus_inverter_1' - # PSRAM octal 80Mhz # - path: 'packages/board/board_options_PSRAM_octal_80Mhz.yaml' @@ -290,12 +273,14 @@ packages: vars: canbus_id: '1' # must be a number canbus_name: 'CANBUS 1' - canbus_node_id: 'canbus_inverter_1' # CAN bus node to which your inverter is connected canbus_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable # CAN frames sending will be paused for `30s` if the inverter does not respond with an ACK (can_id 0x305) before the end of the `canbus_link_timer` (5s by default). canbus_link_timer_enabled: 'true' # Set it to 'false' if your inverter/charger is not sending ACK (can_id 0x305) every `1s` as specified by the protocol - canbus_link_timer: '5s' - canbus_extended_ack: 'false' # Set to 'true' for enable extended 29-bit IDs (required for Schneider XW Pro) + canbus_link_timer: '10s' # min 6s with Deye + # CAN setup + canbus_platform: 'esp32_can' # esp32_can / mcp2515 + canbus_node_id: 'canbus_inverter_1' # CAN bus node to which your inverter is connected + canbus_bitrate: '500kbps' # Default : 500kbps @@ -303,14 +288,18 @@ packages: # | >>> RS485 bus to Inverter # +------------------------------------------------------------------------------+ - # - path: 'packages/yambms/yambms_rs485_pylon.yaml' # yambms_rs485_pylon_web_server.yaml + # - path: 'packages/yambms/yambms_rs485.yaml' + # # - path: 'packages/yambms/yambms_rs485_web_server.yaml' # vars: - # rs485_id: '1' # Must be a number + # rs485_id: '1' # Must be a number # rs485_name: 'RS485 1' - # rs485_uart_id: 'uart_esp_3' # UART interface to which your inverter is connected - # rs485_uart_baud_rate: '9600' + # rs485_protocol: 'pylon' # pylon / voltronic # rs485_update_timeout: '10s' # rs485_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable + # # UART setup + # rs485_uart_id: 'uart_esp_3' # UART interface to which your inverter is connected + # rs485_uart_baud_rate: '9600' # Default : 9600 / Epever : 115200 + # +------------------------------------------------------------------------------+ diff --git a/documents/README/YamBMS_LP_YAML.md b/documents/README/YamBMS_LP_YAML.md index ff339b3..ab27373 100644 --- a/documents/README/YamBMS_LP_YAML.md +++ b/documents/README/YamBMS_LP_YAML.md @@ -71,6 +71,7 @@ api: > Please note that enabling this component will take up a lot of memory and may decrease stability and be the cause of reboot depending on the capabilities of the board used. If you don't use `Home Assistant`, you can activate the `Web Server` and have access to YamBMS information and also interact with the application. +To do so, include the `yambms_web_server.yaml` package, see [Board options](#board-options). [ESPHome Web Server Component](https://esphome.io/components/web_server.html) @@ -93,55 +94,52 @@ So just one of the packages below : ### ESP32 Generic ```YAML - device_board: !include packages/board/board_ESP32_Generic.yaml + board: !include packages/board/board_ESP32_Generic.yaml ``` ### ESP32 DevKit-V1 ```YAML - device_board: !include packages/board/board_ESP32_DevKit-V1.yaml + board: !include packages/board/board_ESP32_DevKit-V1.yaml ``` ### ESP32-S3 DevKitC-1 ```YAML # RGB LED to GPIO 38 - device_board: !include packages/board/board_ESP32-S3_DevKitC-1_LED-38.yaml + board: !include packages/board/board_ESP32-S3_DevKitC-1_LED-38.yaml ``` ```YAML # RGB LED to GPIO 48 - device_board: !include packages/board/board_ESP32-S3_DevKitC-1_LED-48.yaml + board: !include packages/board/board_ESP32-S3_DevKitC-1_LED-48.yaml ``` ### Atom S3 Lite ```YAML - device_board: !include packages/board/board_ESP32-S3_AtomS3-Lite.yaml + board: !include packages/board/board_ESP32-S3_AtomS3-Lite.yaml ``` ### Atom S3 / S3R (display) -In this case you need to specify the `yambms` and `canbus` IDs to display the information on the screen. +The screen is a separate package, `board_options_display_128x128.yaml`, to include next to the board. ```YAML - device_board: !include - file: packages/board/board_ESP32-S3_AtomS3.yaml - vars: - display_auto_next_page_interval: '5s' -``` + board: !include packages/board/board_ESP32-S3_AtomS3.yaml + # board: !include packages/board/board_ESP32-S3_AtomS3R.yaml -```YAML - device_board: !include - file: packages/board/board_ESP32-S3_AtomS3R.yaml + board_display: !include + file: packages/board/board_options_display_128x128.yaml vars: display_auto_next_page_interval: '5s' + display_rotation: '0' # 0/90/180/270 rotation angle in degrees ``` ### ESP32-C3 DevKitM-1 ```YAML - device_board: !include packages/board_ESP32-C3_DevKitM-1.yaml + board: !include packages/board/board_ESP32-C3_DevKitM-1.yaml ``` ### ESP32-C3 ETH01-EVO @@ -149,13 +147,13 @@ In this case you need to specify the `yambms` and `canbus` IDs to display the in This board has an `Ethernet` port and can be powered from `POE` (optional). ```YAML - device_board: !include packages/board/board_ESP32-C3_ETH01-EVO.yaml + board: !include packages/board/board_ESP32-C3_ETH01-EVO.yaml ``` ### ESP32 LilyGo T-CAN485 ```YAML - device_board: !include packages/board/board_ESP32_LilyGo-T-CAN485.yaml + board: !include packages/board/board_ESP32_LilyGo-T-CAN485.yaml ``` > [!NOTE] > The device has an integrated 120 Ohm termination resistor. If used as a node in the middle, this resistor must be removed. ![Image](../../images/MCU_ESP32_LilyGo-T-CAN485_resistors.jpg) @@ -163,7 +161,7 @@ This board has an `Ethernet` port and can be powered from `POE` (optional). ### ESP32-S3 LilyGo T-Connect ```YAML - device_board: !include packages/board/board_ESP32-S3_LilyGo-T-Connect.yaml + board: !include packages/board/board_ESP32-S3_LilyGo-T-Connect.yaml ``` > [!NOTE] > The device has an integrated 120 Ohm termination resistor. If used as a node in the middle, this resistor must be removed. @@ -171,11 +169,34 @@ This board has an `Ethernet` port and can be powered from `POE` (optional). ### ESP32-S3 LilyGo T-Connect Pro ```YAML - device_board: !include packages/board/board_ESP32-S3_LilyGo-T-Connect-Pro.yaml + board: !include packages/board/board_ESP32-S3_LilyGo-T-Connect-Pro.yaml ``` > [!NOTE] > The device has an integrated 120 Ohm termination resistor. If used as a node in the middle, this resistor must be removed. +## Board options + +Uncomment the options you need. Boards with a screen also need their display package, see the +`Board Display` block of the [example YAML](../../YamBMS_Local_Packages_example.yaml). + +```YAML + # PSRAM octal 80Mhz + # psram_octal_80Mhz: !include packages/board/board_options_PSRAM_octal_80Mhz.yaml + + # Web Server + # web_server: !include packages/yambms/yambms_web_server.yaml + + # WiFi AP @ 192.168.4.1 + # wifi_ap: !include packages/board/board_options_wifi_ap.yaml + + # Captive Portal @ 192.168.4.1 + # captive_portal: !include packages/board/board_options_captive_portal.yaml +``` + +> [!NOTE] +> UART and CAN interfaces are not included here. Each package declares its own, from its +> `*_uart_id` or `canbus_platform` var. + ## YamBMS single-node example ```YAML @@ -184,6 +205,7 @@ This board has an `Ethernet` port and can be powered from `POE` (optional). vars: shunt_id: '1' # must be a number shunt_name: 'Shunt 1' + shunt_uart_id: 'uart_esp_1' # other settings # ... @@ -192,14 +214,16 @@ This board has an `Ethernet` port and can be powered from `POE` (optional). vars: bms_id: '1' # must be a number bms_name: 'BMS 1' + bms_uart_id: 'uart_esp_2' # other settings # ... bms2: !include - file: packages/bms/bms_combine_JBD_UART_full.yaml + file: packages/bms/bms_combine_JBD_BLE_full.yaml vars: bms_id: '2' # must be a number bms_name: 'BMS 2' + bms_ble_mac_address: 11:22:33:44:55:77 # other settings # ... @@ -220,7 +244,7 @@ This board has an `Ethernet` port and can be powered from `POE` (optional). ```YAML modbus: !include - file: packages/base/device_modbus.yaml + file: packages/board/board_options_itf_modbus.yaml vars: modbus_role: 'client' # client / server modbus_uart_id: 'uart_esp_1' # RS485 board @@ -254,7 +278,7 @@ This board has an `Ethernet` port and can be powered from `POE` (optional). ```YAML modbus: !include - file: packages/base/device_modbus.yaml + file: packages/board/board_options_itf_modbus.yaml vars: modbus_role: 'server' # client / server modbus_uart_id: 'uart_esp_1' # RS485 board @@ -287,7 +311,7 @@ This board has an `Ethernet` port and can be powered from `POE` (optional). ```YAML modbus: !include - file: packages/base/device_modbus.yaml + file: packages/board/board_options_itf_modbus.yaml vars: modbus_role: 'server' # client / server modbus_uart_id: 'uart_esp_1' # RS485 board @@ -354,40 +378,59 @@ As soon as the balancer is available/online the values ​​`equalizing` and `b Take the time to configure `YamBMS` correctly according to your battery chemistry type `LFP/Li-ion/LTO` and `cell count`. Charging voltages can be changed in the app. +The YamBMS settings are `substitutions`, not `vars`, because the other packages read them too +(`yambms_id` for instance is used by the CAN and RS485 packages). Set them in the +`substitutions:` block at the top of your YAML : + ```YAML - yambms1: !include - file: packages/yambms/yambms.yaml - vars: - # Please read the cut-off charging logic README to understand how the YamBMS works - yambms_id: 'yambms1' - yambms_name: 'YamBMS 1' - yambms_update_interval: '1s' - # Input numbers can be displayed as a slider or an input box, options are 'slider' or 'box'. - yambms_input_number_mode: 'slider' - # Please check and fill in the options below correctly according to your battery chemistry and number of cells in series. - # These parameters are important and used for charging logic. - # Battery Chemistry - yambms_battery_chemistry: '1' # 1-LFP | 2-Li-ion | 3-LTO - # Number of cells in series - yambms_cell_count: '16' - # Bulk / Absorption Voltage : corresponds to the Bulk voltage that will be used to charge the battery. (LFP : 55.2V = 3.45V/Cell for 16S battery) - yambms_bulk_v: '55.2' - # Float Voltage : corresponds to the voltage at which the battery would be maintained at the end of charge. (LFP : 53.6V = 3.35V/Cell for 16S battery) - yambms_float_v: '53.6' - # Rebulk voltage, voltage from which a new Bulk charge can start. (LFP : 52.8V = 3.3V/Cell for 16S battery) - yambms_rebulk_v: '52.8' - # Maximum time in minutes that the cut-off step can last before charging is complete - # If your cells are properly balanced this step ends at the fastest after the `cut-off timer` - # This timer can be deactivated with a switch - yambms_eoc_timer: '30' - # Time in seconds during which the end of charge conditions must be respected (cut-off + cells not equalizing) - yambms_cutoff_timer: '60' - # Max. charge current : corresponds to the maximum charge current which may be requested by YamBMS. - # The current requested will be proportional to the BMS count without ever exceeding this value. - yambms_max_requested_charge_current: '300' # in Ampere - # Max. discharge current : corresponds to the maximum discharge current which may be requested by YamBMS. - # The current requested will be proportional to the BMS count without ever exceeding this value. - yambms_max_requested_discharge_current: '300' # in Ampere +substitutions: + # Please read the cut-off charging logic README to understand how the YamBMS works + yambms_id: '1' # Number without spaces + yambms_name: 'YamBMS 1' # Prefix for YamBMS entities + yambms_update_interval: '1s' + # Input numbers can be displayed as a slider or an input box, options are 'slider' or 'box'. + yambms_input_number_mode: 'slider' + # Please check and fill in the options below correctly according to your battery chemistry and number of cells in series. + # These parameters are important and used for charging logic. + # Battery Chemistry + yambms_battery_chemistry: '1' # 1-LFP | 2-Li-ion | 3-LTO + # Number of cells in series + yambms_cell_count: '16' + # Bulk / Absorption Voltage : corresponds to the Bulk voltage that will be used to charge the battery. (LFP : 55.2V = 3.45V/Cell for 16S battery) + yambms_bulk_v: '55.2' + # Float Voltage : corresponds to the voltage at which the battery would be maintained at the end of charge. (LFP : 53.6V = 3.35V/Cell for 16S battery) + yambms_float_v: '53.6' + # Rebulk voltage, voltage from which a new Bulk charge can start. (LFP : 52.8V = 3.3V/Cell for 16S battery) + yambms_rebulk_v: '52.8' + # Maximum time in minutes that the cut-off step can last before charging is complete + # If your cells are properly balanced this step ends at the fastest after the `cut-off timer` + # This timer can be deactivated with a switch + yambms_eoc_timer: '30' + # Time in seconds during which the end of charge conditions must be respected (cut-off + cells not equalizing) + yambms_cutoff_timer: '180' + # Max. charge current : corresponds to the maximum charge current which may be requested by YamBMS. + # The current requested will be proportional to the BMS count without ever exceeding this value. + yambms_max_requested_charge_current: '300' # in Ampere + # Max. discharge current : corresponds to the maximum discharge current which may be requested by YamBMS. + # The current requested will be proportional to the BMS count without ever exceeding this value. + yambms_max_requested_discharge_current: '300' # in Ampere +``` + +Then include the package below `packages:`, with no `vars:` : + +```YAML + yambms: !include packages/yambms/yambms.yaml +``` + +### YamBMS services + +The update service checks for a newer YamBMS version. The telemetry service sends anonymous data +about your setup, see [Telemetry](Telemetry.md). Both are enabled by default and set in the same +`substitutions:` block : + +```YAML + yambms_update_service: 'true' # Set to false to disable update checks + yambms_telemetry_service: 'true' # Set to false to disable the sending of telemetry data ``` ## CAN bus to Inverter @@ -396,6 +439,10 @@ Take the time to configure `YamBMS` correctly according to your battery chemistr > This package is only used with the `YamBMS` main node. > It's possible to use this package multiple times in order to send information on two different `CAN` bus. +> [!WARNING] +> Each declared `CAN` or `RS485` link divides the requested CCL/DCL, even when its `Protocol` is `Disabled`. +> Only declare the links actually wired to an inverter/charger, see [Multi-inverter / multi-charger](YamBMS_functions.md#multi-inverter--multi-charger). + The CAN bus connected to your inverter via the CAN transceiver `canbus_inverter_1`. > [!NOTE] @@ -426,12 +473,21 @@ You can keep the default configuration and adapt the `canbus` node on which the canbus_bitrate: '500kbps' # Default : 500kbps ``` -# RS485 bus to Inverter +> [!IMPORTANT] +> After flashing, select the `Inverter brand` of this link in Home Assistant or the web server. +> The link stays inactive until this is done. If your brand is not listed, select `Other` and set +> `Protocol` yourself, see [Supported devices](Supported_devices.md). + +## RS485 bus to Inverter > [!TIP] > This package is only used with the `YamBMS` main node. > It's possible to use this package multiple times in order to send information on two different `RS485` bus. +> [!WARNING] +> Each declared `CAN` or `RS485` link divides the requested CCL/DCL, even when its `Protocol` is `Disabled`. +> Only declare the links actually wired to an inverter/charger, see [Multi-inverter / multi-charger](YamBMS_functions.md#multi-inverter--multi-charger). + The RS485 bus connected to your inverter via the RS485 transceiver `uart_esp_3`. > [!NOTE] @@ -454,9 +510,16 @@ You can keep the default configuration and adapt the `uart` port on which the co rs485_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable # UART setup rs485_uart_id: 'uart_esp_3' # UART interface to which your inverter is connected + # ESP32 : uart_esp_1 to uart_esp_3 + # WK2168 : uart_spi_0 to uart_spi_7 / uart_i2c_0 to uart_i2c_7 rs485_uart_baud_rate: '9600' # Default : 9600 / Epever : 115200 ``` +> [!IMPORTANT] +> After flashing, select the `Inverter brand` of this link in Home Assistant or the web server. +> The link stays inactive until this is done. If your brand is not listed, select `Other` and set +> `Protocol` yourself, see [Supported devices](Supported_devices.md). + ## Debug The `debug` package will add useful information to refer to if problems occur. diff --git a/documents/README/YamBMS_RP_YAML.md b/documents/README/YamBMS_RP_YAML.md index 887afd9..00ccf1b 100644 --- a/documents/README/YamBMS_RP_YAML.md +++ b/documents/README/YamBMS_RP_YAML.md @@ -71,6 +71,7 @@ api: > Please note that enabling this component will take up a lot of memory and may decrease stability and be the cause of reboot depending on the capabilities of the board used. If you don't use `Home Assistant`, you can activate the `Web Server` and have access to YamBMS information and also interact with the application. +To do so, include the `yambms_web_server.yaml` package, see [Board options](#board-options). [ESPHome Web Server Component](https://esphome.io/components/web_server.html) @@ -137,17 +138,13 @@ So just one of the packages below : ### Atom S3 / S3R (display) -In this case you need to specify the `yambms` and `canbus` IDs to display the information on the screen. +The screen is a separate package, `board_options_display_128x128.yaml`, to include next to the board. ```YAML - path: 'packages/board/board_ESP32-S3_AtomS3.yaml' - vars: - display_auto_next_page_interval: '5s' - display_rotation: '0' # 0/90/180/270 rotation angle in degrees -``` + # - path: 'packages/board/board_ESP32-S3_AtomS3R.yaml' -```YAML - - path: 'packages/board/board_ESP32-S3_AtomS3R.yaml' + - path: 'packages/board/board_options_display_128x128.yaml' vars: display_auto_next_page_interval: '5s' display_rotation: '0' # 0/90/180/270 rotation angle in degrees @@ -156,7 +153,7 @@ In this case you need to specify the `yambms` and `canbus` IDs to display the in ### ESP32-C3 DevKitM-1 ```YAML - - path: 'packages/board_ESP32-C3_DevKitM-1.yaml' + - path: 'packages/board/board_ESP32-C3_DevKitM-1.yaml' ``` ### ESP32-C3 ETH01-EVO @@ -191,6 +188,29 @@ This board has an `Ethernet` port and can be powered from `POE` (optional). > [!NOTE] > The device has an integrated 120 Ohm termination resistor. If used as a node in the middle, this resistor must be removed. +## Board options + +Uncomment the options you need. Boards with a screen also need their display package, see the +`Board Display` block of the [example YAML](../../YamBMS_Remote_Packages_example.yaml). + +```YAML + # PSRAM octal 80Mhz + # - path: 'packages/board/board_options_PSRAM_octal_80Mhz.yaml' + + # Web Server + # - path: 'packages/yambms/yambms_web_server.yaml' + + # WiFi AP @ 192.168.4.1 + # - path: 'packages/board/board_options_wifi_ap.yaml' + + # Captive Portal @ 192.168.4.1 + # - path: 'packages/board/board_options_captive_portal.yaml' +``` + +> [!NOTE] +> UART and CAN interfaces are not included here. Each package declares its own, from its +> `*_uart_id` or `canbus_platform` var. + ## YamBMS [single-node](../../examples/single-node/) example ```YAML @@ -206,7 +226,8 @@ This board has an `Ethernet` port and can be powered from `POE` (optional). vars: bms_id: '1' # must be a number bms_name: 'BMS 1' -- # other settings + bms_uart_id: 'uart_esp_2' + # other settings # ... # BMS 2 @@ -214,6 +235,7 @@ This board has an `Ethernet` port and can be powered from `POE` (optional). vars: bms_id: '2' # must be a number bms_name: 'BMS 2' + bms_ble_mac_address: 11:22:33:44:55:77 # other settings # ... @@ -234,7 +256,7 @@ This board has an `Ethernet` port and can be powered from `POE` (optional). ```YAML # Modbus client - - path: 'packages/base/device_modbus.yaml' + - path: 'packages/board/board_options_itf_modbus.yaml' vars: modbus_role: 'client' # client / server modbus_uart_id: 'uart_esp_1' # RS485 board @@ -264,7 +286,7 @@ This board has an `Ethernet` port and can be powered from `POE` (optional). ```YAML # Modbus server - - path: 'packages/base/device_modbus.yaml' + - path: 'packages/board/board_options_itf_modbus.yaml' vars: modbus_role: 'server' # client / server modbus_uart_id: 'uart_esp_1' # RS485 board @@ -294,7 +316,7 @@ This board has an `Ethernet` port and can be powered from `POE` (optional). ```YAML # Modbus server - - path: 'packages/base/device_modbus.yaml' + - path: 'packages/board/board_options_itf_modbus.yaml' vars: modbus_role: 'server' # client / server modbus_uart_id: 'uart_esp_1' # RS485 board @@ -359,44 +381,59 @@ As soon as the balancer is available/online the values ​​`equalizing` and `b Take the time to configure `YamBMS` correctly according to your battery chemistry type `LFP/Li-ion/LTO` and `cell count`. Charging voltages can be changed in the app. +The YamBMS settings are `substitutions`, not `vars`, because the other packages read them too +(`yambms_id` for instance is used by the CAN and RS485 packages). Set them in the +`substitutions:` block at the top of your YAML : + +```YAML +substitutions: + # Please read the cut-off charging logic README to understand how the YamBMS works + yambms_id: '1' # Number without spaces + yambms_name: 'YamBMS 1' # Prefix for YamBMS entities + yambms_update_interval: '1s' + # Input numbers can be displayed as a slider or an input box, options are 'slider' or 'box'. + yambms_input_number_mode: 'slider' + # Please check and fill in the options below correctly according to your battery chemistry and number of cells in series. + # These parameters are important and used for charging logic. + # Battery Chemistry + yambms_battery_chemistry: '1' # 1-LFP | 2-Li-ion | 3-LTO + # Number of cells in series + yambms_cell_count: '16' + # Bulk / Absorption Voltage : corresponds to the Bulk voltage that will be used to charge the battery. (LFP : 55.2V = 3.45V/Cell for 16S battery) + yambms_bulk_v: '55.2' + # Float Voltage : corresponds to the voltage at which the battery would be maintained at the end of charge. (LFP : 53.6V = 3.35V/Cell for 16S battery) + yambms_float_v: '53.6' + # Rebulk voltage, voltage from which a new Bulk charge can start. (LFP : 52.8V = 3.3V/Cell for 16S battery) + yambms_rebulk_v: '52.8' + # Maximum time in minutes that the cut-off step can last before charging is complete + # If your cells are properly balanced this step ends at the fastest after the `cut-off timer` + # This timer can be deactivated with a switch + yambms_eoc_timer: '30' + # Time in seconds during which the end of charge conditions must be respected (cut-off + cells not equalizing) + yambms_cutoff_timer: '180' + # Max. charge current : corresponds to the maximum charge current which may be requested by YamBMS. + # The current requested will be proportional to the BMS count without ever exceeding this value. + yambms_max_requested_charge_current: '300' # in Ampere + # Max. discharge current : corresponds to the maximum discharge current which may be requested by YamBMS. + # The current requested will be proportional to the BMS count without ever exceeding this value. + yambms_max_requested_discharge_current: '300' # in Ampere +``` + +Then include the package, with no `vars:` : + ```YAML - yambms: - url: https://github.com/Sleeper85/esphome-yambms - ref: main - refresh: 0s - files: - path: 'packages/yambms/yambms.yaml' - vars: - # Please read the cut-off charging logic README to understand how the YamBMS works - yambms_id: 'yambms1' - yambms_name: 'YamBMS 1' - yambms_update_interval: '1s' - # Input numbers can be displayed as a slider or an input box, options are 'slider' or 'box'. - yambms_input_number_mode: 'slider' - # Please check and fill in the options below correctly according to your battery chemistry and number of cells in series. - # These parameters are important and used for charging logic. - # Battery Chemistry - yambms_battery_chemistry: '1' # 1-LFP | 2-Li-ion | 3-LTO - # Number of cells in series - yambms_cell_count: '16' - # Bulk / Absorption Voltage : corresponds to the Bulk voltage that will be used to charge the battery. (LFP : 55.2V = 3.45V/Cell for 16S battery) - yambms_bulk_v: '55.2' - # Float Voltage : corresponds to the voltage at which the battery would be maintained at the end of charge. (LFP : 53.6V = 3.35V/Cell for 16S battery) - yambms_float_v: '53.6' - # Rebulk voltage, voltage from which a new Bulk charge can start. (LFP : 52.8V = 3.3V/Cell for 16S battery) - yambms_rebulk_v: '52.8' - # Maximum time in minutes that the cut-off step can last before charging is complete - # If your cells are properly balanced this step ends at the fastest after the `cut-off timer` - # This timer can be deactivated with a switch - yambms_eoc_timer: '30' - # Time in seconds during which the end of charge conditions must be respected (cut-off + cells not equalizing) - yambms_cutoff_timer: '60' - # Max. charge current : corresponds to the maximum charge current which may be requested by YamBMS. - # The current requested will be proportional to the BMS count without ever exceeding this value. - yambms_max_requested_charge_current: '300' # in Ampere - # Max. discharge current : corresponds to the maximum discharge current which may be requested by YamBMS. - # The current requested will be proportional to the BMS count without ever exceeding this value. - yambms_max_requested_discharge_current: '300' # in Ampere +``` + +### YamBMS services + +The update service checks for a newer YamBMS version. The telemetry service sends anonymous data +about your setup, see [Telemetry](Telemetry.md). Both are enabled by default and set in the same +`substitutions:` block : + +```YAML + yambms_update_service: 'true' # Set to false to disable update checks + yambms_telemetry_service: 'true' # Set to false to disable the sending of telemetry data ``` ## CAN bus to Inverter @@ -405,6 +442,10 @@ Take the time to configure `YamBMS` correctly according to your battery chemistr > This package is only used with the `YamBMS` main node. > It's possible to use this package multiple times in order to send information on two different `CAN` bus. +> [!WARNING] +> Each declared `CAN` or `RS485` link divides the requested CCL/DCL, even when its `Protocol` is `Disabled`. +> Only declare the links actually wired to an inverter/charger, see [Multi-inverter / multi-charger](YamBMS_functions.md#multi-inverter--multi-charger). + The CAN bus connected to your inverter via the CAN transceiver `canbus_inverter_1`. > [!NOTE] @@ -438,12 +479,21 @@ You can keep the default configuration and adapt the `canbus` node on which the canbus_bitrate: '500kbps' # Default : 500kbps ``` -# RS485 bus to Inverter +> [!IMPORTANT] +> After flashing, select the `Inverter brand` of this link in Home Assistant or the web server. +> The link stays inactive until this is done. If your brand is not listed, select `Other` and set +> `Protocol` yourself, see [Supported devices](Supported_devices.md). + +## RS485 bus to Inverter > [!TIP] > This package is only used with the `YamBMS` main node. > It's possible to use this package multiple times in order to send information on two different `RS485` bus. +> [!WARNING] +> Each declared `CAN` or `RS485` link divides the requested CCL/DCL, even when its `Protocol` is `Disabled`. +> Only declare the links actually wired to an inverter/charger, see [Multi-inverter / multi-charger](YamBMS_functions.md#multi-inverter--multi-charger). + The RS485 bus connected to your inverter via the RS485 transceiver `uart_esp_3`. > [!NOTE] @@ -470,9 +520,16 @@ You can keep the default configuration and adapt the `uart` port on which the co rs485_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable # UART setup rs485_uart_id: 'uart_esp_3' # UART interface to which your inverter is connected + # ESP32 : uart_esp_1 to uart_esp_3 + # WK2168 : uart_spi_0 to uart_spi_7 / uart_i2c_0 to uart_i2c_7 rs485_uart_baud_rate: '9600' # Default : 9600 / Epever : 115200 ``` +> [!IMPORTANT] +> After flashing, select the `Inverter brand` of this link in Home Assistant or the web server. +> The link stays inactive until this is done. If your brand is not listed, select `Other` and set +> `Protocol` yourself, see [Supported devices](Supported_devices.md). + ## Debug The `debug` package will add useful information to refer to if problems occur. diff --git a/examples/single-node/LP_BMS_example_DEYE_CAN.yaml b/examples/single-node/LP_BMS_example_DEYE_CAN.yaml index 6817cee..b50cfaf 100644 --- a/examples/single-node/LP_BMS_example_DEYE_CAN.yaml +++ b/examples/single-node/LP_BMS_example_DEYE_CAN.yaml @@ -32,6 +32,8 @@ packages: vars: # CAN BUS ID canbus_id: 'canbus_bms_1' + canbus_platform: 'mcp2515' # esp32_can / mcp2515 + canbus_bitrate: '500kbps' # Default : 500kbps deye_name: 'DEYE-Top 1' deye_id: '1' diff --git a/examples/single-node/LP_BMS_example_JK-B_RS485_Modbus_mode2.yaml b/examples/single-node/LP_BMS_example_JK-B_RS485_Modbus_mode2.yaml index d930152..069ab22 100644 --- a/examples/single-node/LP_BMS_example_JK-B_RS485_Modbus_mode2.yaml +++ b/examples/single-node/LP_BMS_example_JK-B_RS485_Modbus_mode2.yaml @@ -29,19 +29,12 @@ packages: # The sniffer represents the ESP node connected to the JK-BMS PB RS485 bus # If address 0x00 is not detected on the RS485 bus, the sniffer will act directly as a master BMS (mode 2, max 15 BMS) - # RS485 Sniffer with talk_pin (WS-RS485-CAN and other RS485 boards with a flow_control_pin) - # sniffer1: !include - # file: packages/bms/bms_combine_JK_RS485_Modbus_sniffer_talk_pin.yaml - # vars: - # sniffer_protocol: 'JK02_32S' - # sniffer_uart_id: 'uart_esp_1' - # sniffer_talk_pin: ${talk_pin} # can be replaced by the GPIO number - sniffer1: !include file: packages/bms/bms_combine_JK_RS485_Modbus_sniffer.yaml vars: sniffer_protocol: 'JK02_32S' sniffer_uart_id: 'uart_esp_1' + # uart_flow_control_pin: ${talk_pin} # WS-RS485-CAN and other RS485 boards with a flow_control_pin # Mode2 : configure the DIP switches of your BMS from 0x01 to 0x0F (don't use the 0x00 address, maximum 15 BMS) bms1: !include diff --git a/examples/single-node/LP_BMS_example_JK-PB_RS485_Modbus_mode1.yaml b/examples/single-node/LP_BMS_example_JK-PB_RS485_Modbus_mode1.yaml index 3d8510f..b39d2d4 100644 --- a/examples/single-node/LP_BMS_example_JK-PB_RS485_Modbus_mode1.yaml +++ b/examples/single-node/LP_BMS_example_JK-PB_RS485_Modbus_mode1.yaml @@ -29,19 +29,12 @@ packages: # The sniffer represents the ESP node connected to the JK-BMS PB RS485 bus # If address 0x00 is not detected on the RS485 bus, the sniffer will act directly as a master BMS (mode 1, max 16 BMS) - # RS485 Sniffer with talk_pin (WS-RS485-CAN and other RS485 boards with a flow_control_pin) - # sniffer1: !include - # file: packages/bms/bms_combine_JK_RS485_Modbus_sniffer_talk_pin.yaml - # vars: - # sniffer_protocol: 'JK02_32S' - # sniffer_uart_id: 'uart_esp_1' - # sniffer_talk_pin: ${talk_pin} # can be replaced by the GPIO number - sniffer1: !include file: packages/bms/bms_combine_JK_RS485_Modbus_sniffer.yaml vars: sniffer_protocol: 'JK02_32S' sniffer_uart_id: 'uart_esp_1' + # uart_flow_control_pin: ${talk_pin} # WS-RS485-CAN and other RS485 boards with a flow_control_pin # Mode1 : configure the DIP switches of your BMS from 0x00 to 0x0F (max 16 BMS) bms1: !include diff --git a/examples/single-node/LP_BMS_example_JK-PB_RS485_Modbus_mode2.yaml b/examples/single-node/LP_BMS_example_JK-PB_RS485_Modbus_mode2.yaml index 4d39c2e..498e244 100644 --- a/examples/single-node/LP_BMS_example_JK-PB_RS485_Modbus_mode2.yaml +++ b/examples/single-node/LP_BMS_example_JK-PB_RS485_Modbus_mode2.yaml @@ -29,19 +29,12 @@ packages: # The sniffer represents the ESP node connected to the JK-BMS PB RS485 bus # If address 0x00 is not detected on the RS485 bus, the sniffer will act directly as a master BMS (mode 2, max 15 BMS) - # RS485 Sniffer with talk_pin (WS-RS485-CAN and other RS485 boards with a flow_control_pin) - # sniffer1: !include - # file: packages/bms/bms_combine_JK_RS485_Modbus_sniffer_talk_pin.yaml - # vars: - # sniffer_protocol: 'JK02_32S' - # sniffer_uart_id: 'uart_esp_1' - # sniffer_talk_pin: ${talk_pin} # can be replaced by the GPIO number - sniffer1: !include file: packages/bms/bms_combine_JK_RS485_Modbus_sniffer.yaml vars: sniffer_protocol: 'JK02_32S' sniffer_uart_id: 'uart_esp_1' + # uart_flow_control_pin: ${talk_pin} # WS-RS485-CAN and other RS485 boards with a flow_control_pin # Mode2 : configure the DIP switches of your BMS from 0x01 to 0x0F (don't use the 0x00 address, maximum 15 BMS) bms1: !include diff --git a/examples/single-node/RP_BMS_example_DEYE_CAN.yaml b/examples/single-node/RP_BMS_example_DEYE_CAN.yaml index 6ed6697..0cb0250 100644 --- a/examples/single-node/RP_BMS_example_DEYE_CAN.yaml +++ b/examples/single-node/RP_BMS_example_DEYE_CAN.yaml @@ -36,6 +36,8 @@ vars: # CAN BUS ID canbus_id: 'canbus_bms_1' + canbus_platform: 'mcp2515' # esp32_can / mcp2515 + canbus_bitrate: '500kbps' # Default : 500kbps deye_name: 'DEYE-Top 1' deye_id: '1' # Deye module 1 diff --git a/examples/single-node/RP_BMS_example_JK-B_RS485_Modbus_mode2.yaml b/examples/single-node/RP_BMS_example_JK-B_RS485_Modbus_mode2.yaml index 9310ede..fc91e78 100644 --- a/examples/single-node/RP_BMS_example_JK-B_RS485_Modbus_mode2.yaml +++ b/examples/single-node/RP_BMS_example_JK-B_RS485_Modbus_mode2.yaml @@ -31,17 +31,12 @@ ################################################################################ - # RS485 Sniffer with talk_pin (WS-RS485-CAN and other RS485 boards with a flow_control_pin) - # - path: 'packages/bms/bms_combine_JK_RS485_Modbus_sniffer_talk_pin.yaml' - # vars: - # sniffer_protocol: 'JK02_32S' - # sniffer_uart_id: 'uart_esp_1' - # sniffer_talk_pin: ${talk_pin} # can be replaced by the GPIO number # RS485 Sniffer - path: 'packages/bms/bms_combine_JK_RS485_Modbus_sniffer.yaml' vars: sniffer_protocol: 'JK02_32S' sniffer_uart_id: 'uart_esp_1' + # uart_flow_control_pin: ${talk_pin} # WS-RS485-CAN and other RS485 boards with a flow_control_pin # BMS 1 - path: 'packages/bms/bms_combine_JK_RS485_Modbus_JK-B_standard.yaml' vars: diff --git a/examples/single-node/RP_BMS_example_JK-PB_RS485_Modbus_mode2.yaml b/examples/single-node/RP_BMS_example_JK-PB_RS485_Modbus_mode2.yaml index 02e197d..b67063b 100644 --- a/examples/single-node/RP_BMS_example_JK-PB_RS485_Modbus_mode2.yaml +++ b/examples/single-node/RP_BMS_example_JK-PB_RS485_Modbus_mode2.yaml @@ -31,17 +31,12 @@ ################################################################################ - # RS485 Sniffer with talk_pin (WS-RS485-CAN and other RS485 boards with a flow_control_pin) - # - path: 'packages/bms/bms_combine_JK_RS485_Modbus_sniffer_talk_pin.yaml' - # vars: - # sniffer_protocol: 'JK02_32S' - # sniffer_uart_id: 'uart_esp_1' - # sniffer_talk_pin: ${talk_pin} # can be replaced by the GPIO number # RS485 Sniffer - path: 'packages/bms/bms_combine_JK_RS485_Modbus_sniffer.yaml' vars: sniffer_protocol: 'JK02_32S' sniffer_uart_id: 'uart_esp_1' + # uart_flow_control_pin: ${talk_pin} # WS-RS485-CAN and other RS485 boards with a flow_control_pin # BMS 1 - path: 'packages/bms/bms_combine_JK_RS485_Modbus_bms_standard.yaml' vars: