Hardware highlighted and changelog moved
This commit is contained in:
1 parent
beb9139d90
commit
fbea8d3ffc
2 files changed
+122
-107
No files matched your search
@@ -60,6 +60,16 @@
|
||||
|
||||

|
||||
|
||||
## Hardware highlighted
|
||||
|
||||
This project works with various `ESP32` variants and also with the `Raspberry Pi Pico (RP2040)`.
|
||||
Note that merging data from multiple BMS, balancers and shunts is resource-intensive, so I highly recommend a board based on the `ESP32-S3` with `PSRAM`.
|
||||
|
||||
| [LilyGo T-Connect](https://github.com/Xinyuan-LilyGO/T-Connect) | [Waveshare ESP32-S3-RS485-CAN](https://www.waveshare.com/esp32-s3-rs485-can.htm) | [M5Stack AtomS3R](https://docs.m5stack.com/en/core/AtomS3R) |
|
||||
| --- | --- | --- |
|
||||
| - ESP32-S3<br>- 8MB PSRAM<br>- 3x RS485 port<br>- 1x CAN port<br>- 15x GPIOs | - ESP32-S3<br>- 8MB PSRAM<br>- 1x RS485 port<br>- 1x CAN port<br>- 1x SH1.0 connector<br>- 16x GPIOs | - ESP32-S3<br>- 8MB PSRAM<br>- 1x BASE port (**for adding RS485/CAN base**)<br>- 1x UNIT HY2.0 port (**for adding RS485/CAN unit**)<br>- 6x GPIOs |
|
||||
| <img src="images/MCU_ESP32-S3_LilyGo-T-Connect.jpg" width="300"> | <img src="images/MCU_ESP32-S3_WS-RS485-CAN.png" width="300"> | <img src="images/MCU_AtomS3R.png" width="300"> |
|
||||
|
||||
### Single-node
|
||||
|
||||
You install `YamBMS` on a single ESP32 connected to your BMS and your inverter.
|
||||
@@ -146,113 +156,6 @@ for statistics collection. Only [@Sleeper85](https://github.com/Sleeper85) have
|
||||
- Uptime
|
||||
- Current date and time
|
||||
|
||||
## Changelog
|
||||
|
||||
* YamBMS 1.5.8 :
|
||||
* New Dashboards `1.5.8` compatible with `CANBUS` and `RS485` inverter communication protocol
|
||||
* Added BMS `SEPLOS V3` (beta)
|
||||
* Added YamBMS `Web Server v3`
|
||||
* Added `WiFi AP`
|
||||
* `WiFi AP` and `Web Server` credentials centralized in `secrets.yaml`
|
||||
* Added `WT32-ETH01` board
|
||||
* Fixed [issue 8](https://github.com/Sleeper85/esphome-yambms/issues/8) ETH01-EVO board - Davicom DM9051 SPI Ethernet Controller is now integrated in esphome `2025.7`
|
||||
* Fixed [issue 24](https://github.com/Sleeper85/esphome-yambms/issues/24) [JK-PB] SoC never reaches 100%
|
||||
* Fixed [issue 63](https://github.com/Sleeper85/esphome-yambms/issues/63) [JK RS485 component] Fix *.*_SCHEMA deprecations
|
||||
* Merged [PR 67](https://github.com/Sleeper85/esphome-yambms/pull/67) Add options to restrict max. charge and discharge current
|
||||
* Merged [PR 72](https://github.com/Sleeper85/esphome-yambms/pull/72) Add Pylontech RS485 inverter protocol
|
||||
* Merged [PR 74](https://github.com/Sleeper85/esphome-yambms/pull/74) `PYLON RS485` link status, Heartbeat and Requested Force Charge
|
||||
* Merged [PR 75](https://github.com/Sleeper85/esphome-yambms/pull/75) Round `Auto CCL` / `Auto DCL` values
|
||||
* Merged [PR 77](https://github.com/Sleeper85/esphome-yambms/pull/77) `PYLON RS485` prevent stale data on BMS disconnect
|
||||
* Merged [PR 80](https://github.com/Sleeper85/esphome-yambms/pull/80) BMS Modbus client: Return 0 when not online
|
||||
* Merged [PR 81](https://github.com/Sleeper85/esphome-yambms/pull/81) Fix balance trigger voltage for Basen and Deye
|
||||
* YamBMS 1.5.7 :
|
||||
* Adapted the default `min/max` values for the `Float` slider
|
||||
* Merged [PR 53](https://github.com/Sleeper85/esphome-yambms/pull/53) Add feature `Auto Float Voltage`
|
||||
* New dashboard for `Auto Float Voltage` function
|
||||
* Defining `state_class` for all YamBMS sensors
|
||||
* Set esphome `min_version` to `2025.6.0`
|
||||
* Fixed: change `Charge Status` to `Bulk` when `Force Charge` is requested
|
||||
* Merged [PR 70](https://github.com/Sleeper85/esphome-yambms/pull/70) Dashboards compatible with `HA 2025.7`
|
||||
* Merged [PR 70](https://github.com/Sleeper85/esphome-yambms/pull/71) Dashboard `max/min` cell voltage in color using macro
|
||||
* Removed all special characters in entities name + dashboards correction
|
||||
* YamBMS 1.5.6 :
|
||||
* Fixed [issue 58](https://github.com/Sleeper85/esphome-yambms/issues/58) Compilation problem with `esphome 2025.5.0`
|
||||
* Fixed [issue 55](https://github.com/Sleeper85/esphome-yambms/issues/55) New CPU frequency option
|
||||
* Fixed [issue 65](https://github.com/Sleeper85/esphome-yambms/issues/65) JBD Circular dependency error
|
||||
* Fixed [issue 35](https://github.com/Sleeper85/esphome-yambms/issues/35) BMS Charging Cycles Offset
|
||||
* Merged [PR 51](https://github.com/Sleeper85/esphome-yambms/pull/51) Support for RP2040 RPi Pico
|
||||
* Merged [PR 56](https://github.com/Sleeper85/esphome-yambms/pull/56) Add support for Basengreen BMS
|
||||
* Merged [PR 60](https://github.com/Sleeper85/esphome-yambms/pull/60) Fixes for new ESPHome and add of BMS Cycle Count offset
|
||||
* Merged [PR 61](https://github.com/Sleeper85/esphome-yambms/pull/61) Set Modbus BMS values to 0 when BMS goes offline
|
||||
* New `board_ESP32-S3_Touch-LCD-4.3.yaml` board
|
||||
* New `board_ESP32-S3_Touch-LCD-7.yaml` board
|
||||
* New `board_ESP32-S3_YBoard_DJK.yaml` board
|
||||
* New `board_RP2040_RPi_Pico.yaml` board
|
||||
* YamBMS 1.5.5 :
|
||||
* New `main.yaml` with LP (local packages) and RP (remote packages) versions
|
||||
* New `board.yaml` with modular UART/CAN interfaces
|
||||
* The name of the JK `bms.yaml` is no longer linked to a specific model
|
||||
* SoC calculation is now based on remaining capacity for more accuracy (BMS only) [issues #39](https://github.com/Sleeper85/esphome-yambms/issues/39)
|
||||
* SoH calculation is moved to BMS level (for those who do not provide this information)
|
||||
* Improvement of the Victron SmartShunt doc [issues #38](https://github.com/Sleeper85/esphome-yambms/issues/38)
|
||||
* YamBMS 1.5.4 :
|
||||
* New low SoC corrected at each BMS level (the corrected SoC is the one transmitted to YamBMS)
|
||||
* New BMS dashboard
|
||||
* New end of charge logic at each BMS level, the charge switch turns off when the cells are equalized (disabled by default)
|
||||
* Fixed `errors_bitamsk` for JK-PB RS485, test OK with YamBMS (forked component)
|
||||
* YamBMS 1.5.3 :
|
||||
* Broadcasting JK-PB settings to all BMS set to OFF by default
|
||||
* Reorganizing the `board` folder and YAMLs (device_base.yaml moved to board.yaml)
|
||||
* `device_base.yaml` should no longer be part of `YamBMS_main.yaml`
|
||||
* New `RGB LED status` light effects (red, green, blue, cyan) as an `options` packages for `board.yaml`
|
||||
* Increased CPU frequency to `240Mhz` as an `options` packages for `board.yaml`
|
||||
* Added `ESP32 Generic`, `LilyGo T-CAN485`, `LilyGo T-Connect` and `XIAO` boards
|
||||
* Fixed SoC logic (low SoC will be detected at BMS level and no longer at YamBMS level)
|
||||
* Simplified combination logic (removal of the combine switch) + dashboard update
|
||||
* Check `Battery Capacity` is `> 0` before combining info (see [issue #14](https://github.com/Sleeper85/esphome-yambms/issues/14))
|
||||
* Improved alarm logic with a common `YamBMS errors bitmask` for all BMS models (see OTP vs UTP bug reported by @ChrisG)
|
||||
* Added [PR #7547](https://github.com/esphome/esphome/pull/7547) regarding publishing entities via the API
|
||||
* Removed `captive_portal` because it increases the `loop time` too much
|
||||
* `PSRAM` will no longer be enabled by default as this has a bad impact on `BLE BMS`
|
||||
* YamBMS 1.5.2 :
|
||||
* Added shunt `Online Status` binary_sensor
|
||||
* Shunt combine condition based on the new binary_sensor `Online Status`
|
||||
* Logger `baud_rate: 0` by default (frees the 3rd UART and avoids some bugs like "WK2168 with canbus" or "BLE client with RS485 modbus")
|
||||
* Changed names of `bms` and `shunt` YAMLs for modbus `multi-node` solution
|
||||
* Added shared configuration file to simplify main YAML (centralization of parameters)
|
||||
* Simplification (fewer options) when importing `BMS / Shunt` YAMLs
|
||||
* New `multi-node` solution using `RS485 modbus` to communicate information to YamBMS
|
||||
* New board `espBerry` with `2-CH-CAN HAT`
|
||||
* YamBMS 1.5.1 :
|
||||
* The conditions for `combining` BMS and the `charging` and `discharging` instructions no longer have any relation with the `errors_bitmask` sensor, the new system relies on the three **binary_sensor** `online status`, `charging allowed` and `discharging allowed` being linked to the status of alarms and switches.
|
||||
* The BMS combination procedure has been completely rewritten.
|
||||
* Improved structure and ID names of `bms.yaml`.
|
||||
* The `yambms.yaml` and `yambms_combine.yaml` global variable names have been changed for better code reading.
|
||||
* Improved code regarding the CAN bus `esp_light` status for boards without integrated LED.
|
||||
* New `Atom S3R` board and `Smartshunt BLE` shunt.
|
||||
* New `JBD`, `Seplos V1 V2`, `JK-B RS485` (display port) and `FAKE` BMS.
|
||||
* New `YamBMS DEMO` YAML and firmware offered to test and discover how `YamBMS` works.
|
||||
* New management of temperature sensors (no longer limited to two sensors).
|
||||
* **@Der_Hannes** fixed the AtomS3 `black screen` issue (with **esphome > 2024.7.3**) and developed new code for display management based on the [ili9xxx](https://esphome.io/components/display/ili9xxx.html) platform.
|
||||
* `Auto CCL/DCL` functions have been fixed to work with `JK-PB` and `new JK-B` BMS, [see this issue](https://github.com/Sleeper85/esphome-yambms/issues/11).
|
||||
* The `UVPR` and `OVPR` sensors are no longer used and replaced by `UVP` and `OVP` to ensure operation with all BMS.
|
||||
* **@txubelaxu** fixed a bug in the `JK-PB RS485` component that could cause a false battery voltage value to be sent, [see this issue](https://github.com/Sleeper85/esphome-yambms/issues/10).
|
||||
* Improved documentation, added a `HowTo` to create its main YAML, warning about galvanic isolation.
|
||||
* CANBUS 2.3.7 : If there is no response from the inverter, the time before a new communication test has been reduced from `120s` to `60s`, added Victron `0x372` nbr. of modules `blocking charge/discharge`.
|
||||
* YamBMS 1.4.5 : Changed the way to configure WiFi/Ethernet network, added `ESP32-C3 ETH01-EVO` ethernet board, reduction of the number of YAML bms files, UART `rx_buffer_size` is set to `512` by default for JK-B and JK-PB, new JK-BMS BLE sensors (last commits of @syssi) and new BLE `standard` version
|
||||
* CANBUS 2.3.6 : Sending CAN frames stops immediately if there are no combined BMS
|
||||
* YamBMS 1.4.4 : Multi-shunt support, Simplified and new YamBMS option `battery chemistry`, slider `min/max` values are automatically configured based on the battery chemistry and cell count, added `YamBMS Fallback Hotspot`, added YamBMS `Update service`, added PVbrain2 and Atom Matrix board, added PSRAM settings YAML (not enabled by default), new MIN/MAX temperature sensor, added DC current icon, fixed dual sensor `Cell UVPR (MAX)` bug, Improved `combine` code, Breaking change : Atom S3 `GPIOs 1 and 2` reversed
|
||||
* CANBUS 2.3.5 : New MIN/MAX temperature / sensor ID, Improved Victron protocol (online/offline battery modules, installed/available battery capacity)
|
||||
* CANBUS 2.3.4 : Fixed bug of canbus link validation without inverter connected
|
||||
* YamBMS 1.4.3 : Added Victron and Junctek KH-F `Shunt` support and `Requested Force Charge` function based on `SoC start/stop`, new `Total Daily Energy` sensors
|
||||
* CANBUS 2.3.3 : Added `Automatic` BMS name selection and `Requested Force Charge` Bit 3/4/5 (PYLON 0x35C)
|
||||
* CANBUS 2.3.2 : Added `LuxPower` protocol with updated `can_id` 0x355, 0x356, 0x359 and 0x35C
|
||||
* CANBUS 2.3.1 : Improved the procedure for sending canbus frames with reduced loop time, rewritten of the canbus link validation code and added `Inverter Heartbeat Monitoring` function
|
||||
* YamBMS 1.4.2 : Added new `Auto CVL Boost V.` and `Rebulk SoC` functions, new debug.yaml for ESP32 and ESP32-S3, improved code and comments
|
||||
* YamBMS 1.4.1 : Rewriting of the alarm system, bug fixes and improvement of the charging logic (new status `Cut-Off`), icon allocation for each sensor, UART and CANBUS `!extend ${vars}`, New sensor `YamBMS Delta Cell V.`, Improved `Battery SOC` logic
|
||||
* YamBMS 1.3.2 : New var `yambms_cell_count`, the BMS charge or discharge switches can be activated separately without causing the decombination of the BMS, new `minimal` version of the BMS YAML in order to reduce the loop time
|
||||
* YamBMS 1.3.1 : First multi-BMS version named `YamBMS`
|
||||
|
||||
## References
|
||||
|
||||
* Thanks to [@syssi](https://github.com/syssi/esphome-jk-bms) for help and making many BMS components (JK, JBD, Seplos, Pace, etc.)
|
||||
|
||||
Reference in new issue
Block a user