The board_name substitution of each board_*.yaml only reached the
telemetry POST. Home Assistant had no way to read it: the device model is
replaced by the project name, and a sub-device carries no model.
device_base.yaml declares a "Board name" diagnostic text sensor on the
board sub-device. Its value is a constant, so it is published once from
the existing on_boot at priority 600, and update_interval is never: the
API resends the stored state on every connection.
The Diagnostic card of the HA dashboards shows it in a Board row, under
Chip.
The RPi Pico board does not include device_base.yaml and has no such
sensor.
- update and telemetry are now gated independently by substitution;
var_service and its Update service switch are removed
- the uptime text sensor is published by its source instead of polling
it, which fixes the 24855d readings that reached the telemetry, and
the raw seconds are now sent instead of the formatted string
- the MAC address is replaced by a salted SHA-256, derived identically
server side so no pairing window is needed
bms_base_charging_cycles.yaml coerced a NaN raw reading to 0 before adding
the user offset, instead of letting NaN propagate like the sensors fixed
in dee203e4 ("Sensors published to NAN when no BMS is combined"). *_raw is
NaN until the first trusted BMS frame arrives after a reboot, so both
`charging cycles` and `total charging cycle capacity` published a literal
0 during that transient - with `state_class: total`, that 0 also landed
in Home Assistant's long-term statistics.
Fix is to drop the two `if (isnan(...)) = 0;` coercions and let
`NaN + offset == NaN` propagate, so both sensors go unavailable through
the transient instead of reporting 0.
Both sensors also moved from `or: [throttle: 10s, delta: 1]` to the
NaN-safe rate-limit filter already used throughout yambms_core.yaml, since
the built-in `delta` filter drops a NaN transition without updating its
reference and would otherwise freeze the sensor on its last value for up
to 10s.
That filter is extracted from yambms_core.yaml into
packages/base/device_base.yaml, which every node loads via its board_*.yaml
regardless of whether it runs the YamBMS engine - unlike yambms_core.yaml,
which is absent from a multi-node Modbus-server node that only exposes
BMS/Shunt packages. Renamed yambms_rate_limit_filter to rate_limit_filter
now that it is no longer engine-specific.