Commit Graph
158 Commits
Author SHA1 Message Date
Sebastian 1969f14892 Basen: Add "Enable communication" switch (#235)
Add switch to enable/disable communication with Basen BMS. For example
this can be used during maintenance to disable communication with the
selected battery.
2026-02-16 21:01:05 +01:00
Sleeper85 040da87739 Set SEPLOS V3 extended as the default version #216 2026-02-16 15:18:29 +01:00
Andrew Rankin 500d7fa8f6 Add Ecoworthy BMS integration for YamBMS (#199) 2026-02-15 22:49:43 +01:00
Sleeper85 247643195b Create bms_combine_DEMO.yaml 2026-02-15 13:33:09 +01:00
Sleeper85 f70359c0a8 SEPLOS V3 extended version 2026-02-13 16:15:19 +01:00
Sleeper85 7bf602fd1c Added BMS FAKE extended 2026-02-11 15:58:59 +01:00
Sleeper85 b486f34a06 Create bms_demo_charge_simulation.yaml 2026-02-11 02:06:04 +01:00
Sleeper85 b4ff48d377 New BMS FAKE automated 2026-02-11 02:05:53 +01:00
Sleeper85 16937f9e1f Added missing unit_of_measurement 2026-02-10 08:55:27 +01:00
Sleeper85 5ed95b0db9 Updated switch id name 2026-02-07 17:17:37 +01:00
Sleeper85 29a0fe1dee Update bms_options_charging_logic.yaml 2026-02-07 13:53:23 +01:00
Sleeper85 57f256a71d Modbus packages update for testing modbus dev PRs 2026-02-06 16:59:49 +01:00
Sebastian 0b52365492 Clamp Modbus client sensors to reasonable values (#209) 2026-02-06 16:08:28 +01:00
Sebastian 80d5c9ab39 JK-BMS: Add temperature configuration (#205) 2026-02-06 00:30:59 +01:00
MrPabloUK e846ff8ea2 Update fault registry source sensors to trigger on initial state (#203) 2026-02-05 23:44:42 +01:00
Sleeper85 831fc11f13 Update bms_options_charging_logic.yaml 2026-02-05 22:27:02 +01:00
Sleeper85 8db17d6e64 Deleting unnecessary YAMLs 2026-02-05 21:41:02 +01:00
MrPabloUK 447a18b832 Component Fault Registry & Advanced LED Control (#194) 2026-02-05 09:26:49 +01:00
Sleeper85 4165b23670 Improved bms_can_be_combined condition 2026-02-02 12:10:59 +01:00
Sleeper85 434db0ebdc Improved YamBMS datas control + yambms_debug logs 2026-02-01 08:11:54 +01:00
Sleeper85 089338ace1 New YamBMS 1.7.0 three steps lambdas 2026-01-30 16:56:04 +01:00
Sebastian 5b297a2db2 Basen BMS: Add heating control (#178) 2026-01-27 21:13:51 +01:00
Sebastian a9c8443a66 Provide connected BMS IDs to shunt (#158)
The `bms_ids` variable allows to provide an array of BMS IDs that are connected to this shunt.

If one or more BMS from this array are offline, the shunt is not used anymore (Combine = Disabled). This avoids returning a wrong SOC when not all batteries are online/available anymore.

If the BMS goes online again, the shunt is then used again.

This variable is optional. If not provided, the shunt work independently from the BMS online status.

Examples:
```
bms_ids: '{1}'
bms_ids: '{1, 2}'
bms_ids: '{4, 5, 6}'
```
2026-01-26 21:31:46 +01:00
bradmatt275 5f29d3c50d PACE Sensor Fixes (#162)
* Update unit_of_measurement from mV to V and apply scaling filter for voltage readings
* Change readings to use multiply instead of filters for scaling
* Changed number components to use lambda functions for value conversion
* Enhance online status binary sensor to validate BMS communication based on total voltage reading
* Update version numbers and update dates in YAML configuration files
2026-01-19 14:18:54 +01:00
Sleeper85 db2e19586d Testing modbus PR_12614 2026-01-15 19:55:12 +01:00
Sleeper85 00109a7c6e Improved DEMO/FAKE BMS and dashboard 2026-01-14 20:13:26 +01:00
Sebastian f924af33f4 Update temperature sensor filters to reduce noise (#155)
* Update BMS min/max temperature filters to filter out noise
* Add filters for Basen temperature sensors
  - Basen temperature sensors only have full integer resolution. Add additional filters to reduce noise.
* Update filter for min/max temperature
  - Change filters for min/max temperature to reduce noise introduced by changes in the lowest bit (0.1°C). Otherwise this noise will be forwarded by auto temp based current to the requrested charge/discharge current and therefore to the inverter.
2026-01-14 09:20:48 +01:00
Sleeper85 a3bd991e2f Added bms_prefix for SEPLOS V3 for better sub_device support 2025-12-23 14:47:52 +01:00
Sleeper85 0a6e42e1de Changed sub_device version 2025-12-23 12:58:24 +01:00
Sleeper85 a343ee32ab Fixed entity names following sub_device PR #134 2025-12-23 12:25:13 +01:00
MrPabloUK 1804d41f48 Fix JK powertube temp device id (#139) 2025-12-18 22:26:02 +01:00
Andrew Rankin 59cb64181e Correct min/max cells (#140) 2025-12-18 19:06:40 +00:00
Sleeper85 84eb560c66 Fixed bms and shunt modbus client sub_device_id 2025-12-18 00:21:32 +01:00
Sleeper85 da8e3f0200 Fixed sub_device 2025-12-17 22:04:05 +01:00
Sleeper85 e8cdadce56 JK RS485 cell balancing trigger voltage name 2025-12-17 19:36:30 +01:00
MrPabloUK 547b824b5e Sub device support (#134) 2025-12-17 00:42:53 +01:00
Andrew Rankin a9394095d2 [EG4] Swap away from esphome modbus component (#130)
* Rebase was a mess, so re-adding based on the dev branch.
* updates for the 1.6.0 release / dev branch to compile.
* Update external component source version
* Updated the external component source version from main to v1.0.0.
* Update external component source version to v1.0.0
* Add an example for EG4.
2025-12-15 10:06:21 +01:00
Sleeper85 ea30ea145c BMS fake sensors 1.2.0 2025-12-15 09:39:27 +01:00
Sleeper85 b2c5f65478 Reorganization of variables 2025-12-09 02:45:05 +01:00
Sleeper85 de6d37e308 YamBMS modbus dev YAMLs 2025-12-05 22:05:41 +01:00
Sleeper85 9847a53755 New Multi-node BMS names 2025-11-26 00:07:16 +01:00
Sleeper85 9e196afef3 Remove the non-functional SEPLOS V3 version (#94) 2025-11-26 00:04:34 +01:00
Sleeper85 e2de6d6724 Fixed update_interval 2025-11-24 17:02:10 +01:00
Sleeper85 dcbf3e6b8a YamBMS 1.6.0 - 2025.11.23 2025-11-24 14:34:30 +01:00
Sleeper85 6107f9e365 Create bms_modbus_PACE_RS485_bms_full.yaml 2025-11-24 01:45:52 +01:00
Sleeper85 a90071bd87 New BMS battery_capacity_remaining manipulated sensor (issue #96) 2025-11-17 00:12:04 +01:00
Sleeper85 a1a2ce9e19 Improved SEPLOS V1 V2 examples 2025-11-15 00:19:38 +01:00
Sleeper85 68a7a6aac6 Added SEPLOS V3 sniffer version 2025-11-14 23:35:59 +01:00
Sleeper85 beb9139d90 Fixed balance_trigger_voltage and equalizing IDs 2025-10-25 13:09:56 +02:00
Sleeper85 22c0336e8e Added ${sniffer_id} to Broadcasting JK-PB settings to all BMS switch 2025-10-22 19:10:48 +02:00