# Updated : 2026.02.16 # Version : 1.1.4 # GitHub : https://github.com/Sleeper85/esphome-yambms # YamBMS ( Yet another multi-BMS Merging Solution ) # This YAML is free software: you can redistribute it and/or # modify it under the terms of the GNU General Public License # as published by the Free Software Foundation, either version 3 # of the License, or (at your option) any later version. # # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. # See the GNU General Public License for more details. # # You should have received a copy of the GNU General Public License # along with this program. If not, see . ############################ Local Packages Example ############################ # This is not a working YAML but just code ready to copy into # your main YAML below the `packages:` section. ################################################################################ packages: seplos_parser: !include file: packages/bms/bms_combine_SEPLOS_V3_RS485_modbus_sniffer.yaml vars: seplos_uart_id: 'uart_esp_1' seplos_baud_rate: '19200' # 9600 / 19200 ; please set the baudrate of your Seplos BMS model here seplos_bms_count: '3' # Seplos V3 BMS count seplos_update_interval: '3' # # Time in seconds, update interval for all data points bms1: !include file: packages/bms/bms_combine_SEPLOS_V3_RS485_bms_full.yaml vars: bms_id: '1' bms_prefix: 'bms0' # DON'T CHANGE THIS NAME ! bms_name: 'SEPLOS-BMS 1' # Required settings cannot be retrieved from BMS # These values ​​must match your BMS settings bms_max_charge_current: '100' # A. The maximum current your BMS can handle bms_max_discharge_current: '100' # A. The maximum current your BMS can handle # LFP values example bms_cell_ovp: '3.650' # V. Used by 'Auto CCL' functions bms_cell_uvp: '2.800' # V. Used by 'Auto DCL' functions and to calculate maximum discharge voltage bms_balance_trigger_voltage: '0.010' # V. Used by 'Auto CVL' functions # Fake Equalizing: this BMS does not report its balancing state. When enabled, YamBMS infers it # from the cell spread and holds the Cut-Off timer while the pack balances, instead of ending the charge. # Warning: a BMS without a balancer (or with balancing disabled) never closes its cell spread, so it can # stay in Cut-Off a long time, until the EOC timer (30min default) ends the charge, or forever if disabled. bms_fake_equalizing_enabled: 'false' # true/false, false by default bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable bms2: !include file: packages/bms/bms_combine_SEPLOS_V3_RS485_bms_full.yaml vars: bms_id: '2' bms_prefix: 'bms1' # DON'T CHANGE THIS NAME ! bms_name: 'SEPLOS-BMS 2' # Required settings cannot be retrieved from BMS # These values ​​must match your BMS settings bms_max_charge_current: '100' # A. The maximum current your BMS can handle bms_max_discharge_current: '100' # A. The maximum current your BMS can handle # LFP values example bms_cell_ovp: '3.650' # V. Used by 'Auto CCL' functions bms_cell_uvp: '2.800' # V. Used by 'Auto DCL' functions and to calculate maximum discharge voltage bms_balance_trigger_voltage: '0.010' # V. Used by 'Auto CVL' functions # Fake Equalizing: this BMS does not report its balancing state. When enabled, YamBMS infers it # from the cell spread and holds the Cut-Off timer while the pack balances, instead of ending the charge. # Warning: a BMS without a balancer (or with balancing disabled) never closes its cell spread, so it can # stay in Cut-Off a long time, until the EOC timer (30min default) ends the charge, or forever if disabled. bms_fake_equalizing_enabled: 'false' # true/false, false by default bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable bms3: !include file: packages/bms/bms_combine_SEPLOS_V3_RS485_bms_full.yaml vars: bms_id: '3' bms_prefix: 'bms2' # DON'T CHANGE THIS NAME ! bms_name: 'SEPLOS-BMS 3' # Required settings cannot be retrieved from BMS # These values ​​must match your BMS settings bms_max_charge_current: '100' # A. The maximum current your BMS can handle bms_max_discharge_current: '100' # A. The maximum current your BMS can handle # LFP values example bms_cell_ovp: '3.650' # V. Used by 'Auto CCL' functions bms_cell_uvp: '2.800' # V. Used by 'Auto DCL' functions and to calculate maximum discharge voltage bms_balance_trigger_voltage: '0.010' # V. Used by 'Auto CVL' functions # Fake Equalizing: this BMS does not report its balancing state. When enabled, YamBMS infers it # from the cell spread and holds the Cut-Off timer while the pack balances, instead of ending the charge. # Warning: a BMS without a balancer (or with balancing disabled) never closes its cell spread, so it can # stay in Cut-Off a long time, until the EOC timer (30min default) ends the charge, or forever if disabled. bms_fake_equalizing_enabled: 'false' # true/false, false by default bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable