# Updated : 2026.02.16 # Version : 1.1.2 # GitHub : https://github.com/Sleeper85/esphome-yambms # YamBMS ( Yet another multi-BMS Merging Solution ) # This YAML is free software: you can redistribute it and/or # modify it under the terms of the GNU General Public License # as published by the Free Software Foundation, either version 3 # of the License, or (at your option) any later version. # # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. # See the GNU General Public License for more details. # # You should have received a copy of the GNU General Public License # along with this program. If not, see . ############################ Local Packages Example ############################ # This is not a working YAML but just code ready to copy into # your main YAML below the `packages:` section. ################################################################################ packages: # Basen controller controller: !include file: packages/bms/bms_combine_BASEN_RS485_controller.yaml vars: basen_uart_id: 'uart_esp_1' basen_uart_baud_rate: '9600' basen_controller_id: "basen_controller_1" # Basen module 1 bms1: !include file: packages/bms/bms_combine_BASEN_RS485_full.yaml vars: bms_id: '1' # must be a number bms_name: 'BASEN-BMS 1' bms_address: '0x01' bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable # Basen module 2 bms2: !include file: packages/bms/bms_combine_BASEN_RS485_full.yaml vars: bms_id: '2' # must be a number bms_name: 'BASEN-BMS 2' bms_address: '0x02' bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable # Balancer 1 linked to BMS 1 balancer1: !include file: packages/balancer/balancer_sensors_JK_NEEY_BLE.yaml vars: bms_id: '1' # must match the BMS ID balancer_name: 'Balancer 1' balancer_ble_mac_address: 11:22:33:44:55:66 balancer_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable # Balancer 2 linked to BMS 2 balancer2: !include file: packages/balancer/balancer_sensors_JK_NEEY_BLE.yaml vars: bms_id: '2' # must match the BMS ID balancer_name: 'Balancer 2' balancer_ble_mac_address: 11:22:33:44:55:67 balancer_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable