# Updated : 2025.01.16 # Version : 1.5.3 # GitHub : https://github.com/Sleeper85/esphome-yambms # YamBMS ( Yet another multi-BMS Merging Solution ) # This YAML is free software: you can redistribute it and/or # modify it under the terms of the GNU General Public License # as published by the Free Software Foundation, either version 3 # of the License, or (at your option) any later version. # # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. # See the GNU General Public License for more details. # # You should have received a copy of the GNU General Public License # along with this program. If not, see . substitutions: name: yambms-node2 # Don't forget to configure your WiFi credentials in the secrets.yaml file # # If needed, configure a static IP here # wifi: # manual_ip: # static_ip: 192.168.0.85 # gateway: 192.168.0.1 # subnet: 255.255.255.0 # dns1: 8.8.8.8 # dns2: 8.8.4.4 logger: level: INFO # DEBUG / INFO / WARN ota: platform: esphome # Please use the native `api` component instead of the `mqtt` section. # If you use Home Assistant, the native API is more lightweight. # If there is no HA server connected to this API, the ESP32 reboots every 15 minutes to try to resolve the problem. # The "reboot_timeout: 0s" option will keep your ESP32 up and running even if you lose connection to your HA server. api: reboot_timeout: 0s # If you don't want to use ESPHome's native API you can use MQTT instead. # In this case don't forget to remove the 'api:' section. # mqtt: # broker: !secret mqtt_host # username: !secret mqtt_username # password: !secret mqtt_password # id: mqtt_client # Please note that enabling this component will take up a lot of memory and may decrease # stability and be the cause of reboot depending on the capabilities of the board used. #web_server: # port: 80 # log: false # ota: false # Remove canbus_node1 (not necessary) canbus: - id: !remove canbus_node1 # +--------------------------------------+ # | Packages | # +--------------------------------------+ # PLEASE READ : https://github.com/Sleeper85/esphome-yambms/blob/main/documents/README/YamBMS_main_YAML_HowTo.md packages: ############### >>> UNCOMMENT YOUR BOARD <<< ############### # This list is incomplete, other board.yaml are available in the board folder # device_board: !include packages/board/board_ESP32_Generic.yaml # device_board: !include packages/board/board_ESP32_DevKit-V1.yaml # device_board: !include packages/board/board_ESP32_LilyGo-T-CAN485.yaml # device_board: !include packages/board/board_ESP32-C3_ETH01-EVO.yaml # device_board: !include packages/board/board_ESP32-S3_DevKitC-1.yaml # device_board: !include packages/board/board_ESP32-S3_LilyGo-T-Connect.yaml device_board: !include packages/board/board_ESP32-S3_AtomS3-Lite.yaml # device_board: !include # file: packages/board/board_ESP32-S3_AtomS3.yaml # board_ESP32-S3_AtomS3R.yaml # vars: # display_auto_next_page_interval: '5s' ############################################################ # Config : this YAMLs contains the settings shared between all ESP32s config_yambms: !include packages/config/config_yambms.yaml config_multinode_modbus: !include packages/config/config_multi-node_modbus.yaml modbus: !include file: packages/base/device_modbus.yaml vars: modbus_role: 'server' # client / server modbus_uart_id: 'uart_esp_1' # RS485 board modbus_baud_rate: '19200' # 9600 / 19200 / 115200 bms2: !include file: packages/bms/bms_modbus_JK-ALL_BLE_standard.yaml vars: bms_id: '2' # must be a number, also represents the modbus server number ! bms_name: 'JK-BMS 2' bms_ble_protocol_version: JK02_32S # JK02_24S < hardware version 11.0 >= JK02_32S bms_ble_mac_address: C8:47:8C:10:7E:AA bms3: !include file: packages/bms/bms_modbus_JK-ALL_BLE_standard.yaml vars: bms_id: '3' # must be a number, also represents the modbus server number ! bms_name: 'JK-BMS 3' bms_ble_protocol_version: JK02_32S # JK02_24S < hardware version 11.0 >= JK02_32S bms_ble_mac_address: C8:47:8C:EE:16:EA # +--------------------------------------+ # | DEBUG ( logger level must be DEBUG ) | # +--------------------------------------+ device_debug: !include file: packages/base/device_debug_ESP32.yaml vars: debug_name: 'Debug' debug_update_interval: '5s'