# Updated : 2025.12.1 # Version : 1.1.2 # GitHub : https://github.com/Sleeper85/esphome-yambms # YamBMS ( Yet another multi-BMS Merging Solution ) # This YAML is free software: you can redistribute it and/or # modify it under the terms of the GNU General Public License # as published by the Free Software Foundation, either version 3 # of the License, or (at your option) any later version. # # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. # See the GNU General Public License for more details. # # You should have received a copy of the GNU General Public License # along with this program. If not, see . ############################ Local Packages Example ############################ # This is not a working YAML but just code ready to copy into your main YAML. ################################################################################ packages: # The sniffer represents the ESP node connected to the JK-BMS PB RS485 bus # If address 0x00 is not detected on the RS485 bus, the sniffer will act directly as a master BMS (mode 1, max 16 BMS) # RS485 Sniffer with talk_pin (WS-RS485-CAN and other RS485 boards with a flow_control_pin) # sniffer1: !include # file: packages/bms/bms_combine_JK_RS485_Modbus_sniffer_talk_pin.yaml # vars: # sniffer_id: 'sniffer1' # sniffer_protocol: 'JK02_32S' # sniffer_uart_id: 'uart_esp_1' # sniffer_talk_pin: ${talk_pin} # can be replaced by the GPIO number sniffer1: !include file: packages/bms/bms_combine_JK_RS485_Modbus_sniffer.yaml vars: sniffer_id: 'sniffer1' sniffer_protocol: 'JK02_32S' sniffer_uart_id: 'uart_esp_1' # Mode1 : configure the DIP switches of your BMS from 0x00 to 0x0F (max 16 BMS) bms1: !include file: packages/bms/bms_combine_JK_RS485_Modbus_bms_full.yaml vars: # Sniffer ID sniffer_id: 'sniffer1' # BMS vars bms_id: '1' # must be a number bms_name: 'JK-BMS 1' bms_address: '0x00' # BMS 1 DIP switch bms2: !include file: packages/bms/bms_combine_JK_RS485_Modbus_bms_full.yaml vars: # Sniffer ID sniffer_id: 'sniffer1' # BMS vars bms_id: '2' # must be a number bms_name: 'JK-BMS 2' bms_address: '0x01' # BMS 2 DIP switch bms3: !include file: packages/bms/bms_combine_JK_RS485_Modbus_bms_full.yaml vars: # Sniffer ID sniffer_id: 'sniffer1' # BMS vars bms_id: '3' # must be a number bms_name: 'JK-BMS 3' bms_address: '0x02' # BMS 3 DIP switch bms4: !include file: packages/bms/bms_combine_JK_RS485_Modbus_bms_full.yaml vars: # Sniffer ID sniffer_id: 'sniffer1' # BMS vars bms_id: '4' # must be a number bms_name: 'JK-BMS 4' bms_address: '0x03' # BMS 4 DIP switch bms5: !include file: packages/bms/bms_combine_JK_RS485_Modbus_bms_full.yaml vars: # Sniffer ID sniffer_id: 'sniffer1' # BMS vars bms_id: '5' # must be a number bms_name: 'JK-BMS 5' bms_address: '0x04' # BMS 5 DIP switch bms6: !include file: packages/bms/bms_combine_JK_RS485_Modbus_bms_full.yaml vars: # Sniffer ID sniffer_id: 'sniffer1' # BMS vars bms_id: '6' # must be a number bms_name: 'JK-BMS 6' bms_address: '0x05' # BMS 6 DIP switch bms7: !include file: packages/bms/bms_combine_JK_RS485_Modbus_bms_full.yaml vars: # Sniffer ID sniffer_id: 'sniffer1' # BMS vars bms_id: '7' # must be a number bms_name: 'JK-BMS 7' bms_address: '0x06' # BMS 7 DIP switch