# Updated : 2026.06.29 # Version : 1.7.0 # GitHub : https://github.com/Sleeper85/esphome-yambms # YamBMS ( Yet another multi-BMS Merging Solution ) # This YAML is free software: you can redistribute it and/or # modify it under the terms of the GNU General Public License # as published by the Free Software Foundation, either version 3 # of the License, or (at your option) any later version. # # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. # See the GNU General Public License for more details. # # You should have received a copy of the GNU General Public License # along with this program. If not, see . ######################## YamBMS Remote Packages Version ######################## # You can compile this YAML directly without the `packages` folder. # The packages will be automatically downloaded from GitHub. # Don't forget to configure your WiFi credentials in the secrets.yaml ################################################################################ # If needed, configure a static IP here # wifi: # manual_ip: # static_ip: 192.168.0.85 # gateway: 192.168.0.1 # subnet: 255.255.255.0 # dns1: 8.8.8.8 # dns2: 8.8.4.4 logger: level: INFO # VERBOSE / DEBUG / INFO / WARN # baud_rate: 115200 # Send logs to the `hardware_uart` USB output (this consumes a UART interface) # hardware_uart: UART0 # UART0 / USB_SERIAL_JTAG ota: - platform: esphome # Uncomment: # API: to monitor entities via Home Assistant # MQTT: to monitor entities via another system # Neither: to monitor entities only via `web_server` or nothing api: reboot_timeout: 0s # mqtt: # broker: !secret mqtt_host # username: !secret mqtt_username # password: !secret mqtt_password # id: mqtt_client # +--------------------------------------+ # | Global Settings | # +--------------------------------------+ substitutions: # This project uses the `sub-device` function of ESPHome to prefix entity names. # This allows to group entities into logical devices that appear separately in Home Assistant. hostname: 'pvbrain2' # Name of your ESPHome node registered on the IP network (DNS name must be unique) friendly_name : 'PVbrain2' # Name of your board (prefix for board entities) # +--------------------------------------+ # | YamBMS Settings | # +--------------------------------------+ # Please read the cut-off charging logic README to understand how the YamBMS works yambms_id: '1' # Number without spaces yambms_name: 'YamBMS 1' # Prefix for YamBMS entities yambms_update_interval: '1s' # Input numbers can be displayed as a slider or an input box, options are 'slider' or 'box'. yambms_input_number_mode: 'slider' # Please check and fill in the options below correctly according to your battery chemistry and number of cells in series. # These parameters are important and used for charging logic. # Battery Chemistry yambms_battery_chemistry: '1' # 1-LFP | 2-Li-ion | 3-LTO # Number of cells in series yambms_cell_count: '16' # Bulk / Absorption Voltage : corresponds to the Bulk voltage that will be used to charge the battery. (LFP : 55.2V = 3.45V/Cell for 16S battery) yambms_bulk_v: '55.2' # Float Voltage : corresponds to the voltage at which the battery would be maintained at the end of charge. (LFP : 53.6V = 3.35V/Cell for 16S battery) yambms_float_v: '53.6' # Rebulk voltage, voltage from which a new Bulk charge can start. (LFP : 52.8V = 3.3V/Cell for 16S battery) yambms_rebulk_v: '52.8' # Maximum time in minutes that the cut-off step can last before charging is complete # If your cells are properly balanced this step ends at the fastest after the `cut-off timer` # This timer can be deactivated with a switch yambms_eoc_timer: '30' # Time in seconds during which the end of charge conditions must be respected (cut-off + cells not equalizing) yambms_cutoff_timer: '60' # Max. charge current : corresponds to the maximum charge current which may be requested by YamBMS. # The current requested will be proportional to the BMS count without ever exceeding this value. yambms_max_requested_charge_current: '300' # in Ampere # Max. discharge current : corresponds to the maximum discharge current which may be requested by YamBMS. # The current requested will be proportional to the BMS count without ever exceeding this value. yambms_max_requested_discharge_current: '300' # in Ampere # +------------------------------------------------------------------------- # | Temperature-based current limitation # | Can be disabled via the switch "Temperature-based current limitation" # | This factor is applied to the battery capacity (Ah), not the current # | maximum charge/discharge current. For example : 280Ah x 0.5 = 140A # +------------------------------------------------------------------------- # Temperature °C -> Charge Rate (0.0C to 1.0C) yambms_charging_rate_table: | { { -0.1, 0.00 }, { 0.0, 0.05 }, { 5.0, 0.12 }, { 10.0, 0.30 }, { 20.0, 0.50 }, { 25.0, 0.50 }, { 45.0, 0.50 }, { 50.0, 0.50 }, { 55.0, 0.50 }, { 60.0, 0.00 } } # Temperature °C -> Discharge Rate (0.0C to 1.0C) yambms_discharging_rate_table: | { {-30.0, 0.00 }, {-20.0, 0.50 }, {-10.0, 0.50 }, { -5.0, 0.50 }, { 0.0, 0.50 }, { 5.0, 0.50 }, { 45.0, 0.50 }, { 50.0, 0.50 }, { 55.0, 0.50 }, { 60.0, 0.00 } } # +--------------------------------------+ # | Shunt Settings | # +--------------------------------------+ shunt_update_interval: '3s' # frequency at which Shunt data is refreshed # +--------------------------------------+ # | BMS Settings | # +--------------------------------------+ bms_update_interval: '3s' # frequency at which BMS data is refreshed, going below '3s' can cause problems # +--------------------------------------+ # | Health & LED Assignment Logs | # +--------------------------------------+ enable_led_logging: 'false' # Set to true to see if an led is assigned to a component correctly, logged every 60 seconds enable_health_logging: 'false' # Set to true to see if component health for all component instances, logged every 60 seconds # +--------------------------------------+ # | UART expander WK2168 | # +--------------------------------------+ uart0_baudrate: '2400' # uart_id : uart_${uart_hub_bus}_0 WKS {RJ45-UART0} uart1_baudrate: '38400' # uart_id : uart_${uart_hub_bus}_1 JSY193 uart2_baudrate: '19200' # uart_id : uart_${uart_hub_bus}_2 SmartShunt uart3_baudrate: '9600' # uart_id : uart_${uart_hub_bus}_3 SRNE {RJ45-UART3} uart4_baudrate: '115200' # uart_id : uart_${uart_hub_bus}_4 JK-BMS 1 uart5_baudrate: '115200' # uart_id : uart_${uart_hub_bus}_5 JK-BMS 2 uart6_baudrate: '115200' # uart_id : uart_${uart_hub_bus}_6 Pylontech uart7_baudrate: '9600' # uart_id : uart_${uart_hub_bus}_7 EPEVER {RJ45-UART7} # +--------------------------------------+ # | Packages | # +--------------------------------------+ # PLEASE READ : https://github.com/Sleeper85/esphome-yambms/blob/main/documents/README/YamBMS_LP_YAML.md packages: board: !include file: packages/board/board_ESP32-S3_DevKitC-1_PVbrain2.yaml # vars: # server_status_led_id: 'virtual_status_light' # led used to show status. Default = esp_light, set specific led or set to 'virtual_status_light' to disable # network_status_led_id: 'virtual_status_light' # led used to show status. Default = esp_light, set specific led or set to 'virtual_status_light' to disable # +------------------------------------------------------------------------------+ # | >>> Board Options # | >>> Uncomment your interfaces and options # +------------------------------------------------------------------------------+ # UART 1 (uart_id: uart_esp_1) # uart_esp_1: !include packages/board/board_options_itf_uart_esp_1.yaml # UART 2 (uart_id: uart_esp_2) # uart_esp_2: !include packages/board/board_options_itf_uart_esp_2.yaml # UART 3 (uart_id: uart_esp_3) # uart_esp_3: !include packages/board/board_options_itf_uart_esp_3.yaml # BUS # spi_bus: !include packages/board/board_options_itf_bus_spi.yaml # SPI bus for MCP2515 # i2c_bus: !include packages/board/board_options_itf_bus_i2c.yaml # I2C bus for SX1509 and BME280/BMP280 # one_wire_bus: !include packages/board/board_options_itf_bus_one_wire.yaml # One wire bus for Dallas Temperature Sensor # WK2168 UART/IO Expander wk2168_spi: !include packages/board/board_options_itf_pvbrain2_wk2168_spi.yaml # wk2168_i2c: !include packages/board/board_options_itf_pvbrain2_wk2168_i2c.yaml # SX1509 16 channel I/O Expander # sx1509: !include packages/board/board_options_itf_pvbrain2_sx1509.yaml # CAN transceiver - ESP32_CAN (TJA105x, SN65HVD230, M5Stack CAN base/unit) canbus_node_1: !include file: packages/board/board_options_itf_canbus_esp32_can.yaml vars: # to bms = canbus_bms_1 # to inverter = canbus_inverter_1 canbus_node_id: 'canbus_inverter_1' # CAN transceiver - MCP2515 # canbus_node_2: !include # file: packages/board/board_options_itf_canbus_mcp2515.yaml # vars: # # to bms = canbus_bms_1 # # to inverter = canbus_inverter_1 # canbus_node_id: 'canbus_inverter_1' # PSRAM octal 80Mhz # psram_octal_80Mhz: !include packages/board/board_options_PSRAM_octal_80Mhz.yaml # Web Server # web_server: !include packages/yambms/yambms_web_server.yaml # WiFi AP @ 192.168.4.1 # wifi_ap: !include packages/board/board_options_wifi_ap.yaml # Captive Portal @ 192.168.4.1 # captive_portal: !include packages/board/board_options_captive_portal.yaml # +------------------------------------------------------------------------------+ # | >>> BMS / Balancer / Shunt # +------------------------------------------------------------------------------+ # You don't have to import a shunt but you must import at least one BMS. # You can mix different BMS models, the only condition is that the `bms_id` are numbered in order starting from 1 ! # >>> Copy your BMS / Balancer / Shunt packages here # >>> You can find examples at this address : # >>> https://github.com/Sleeper85/esphome-yambms/tree/main/examples/single-node/ # +------------------------------------------------------------------------------+ # | >>> YamBMS # +------------------------------------------------------------------------------+ yambms: !include packages/yambms/yambms.yaml # +------------------------------------------------------------------------------+ # | >>> CAN bus to Inverter # +------------------------------------------------------------------------------+ canbus1: !include file: packages/yambms/yambms_canbus.yaml # yambms_canbus_web_server.yaml vars: canbus_id: '1' # Must be a number canbus_name: 'CANBUS 1' canbus_node_id: 'canbus_inverter_1' # CAN bus node to which your inverter is connected canbus_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable # CAN frames sending will be paused for `30s` if the inverter does not respond with an ACK (can_id 0x305) before the end of the `canbus_link_timer` (5s by default). canbus_link_timer_enabled: 'true' # Set it to 'false' if your inverter/charger is not sending ACK (can_id 0x305) every `1s` as specified by the protocol canbus_link_timer: '5s' canbus_extended_ack: 'false' # Set to 'true' for enable extended 29-bit IDs for the ACK can_id 0x305 (required for Schneider XW Pro) # +------------------------------------------------------------------------------+ # | >>> RS485 bus to Inverter # +------------------------------------------------------------------------------+ # rs485_pylon: !include # file: packages/yambms/yambms_rs485_pylon.yaml # yambms_rs485_pylon_web_server.yaml # vars: # rs485_id: '1' # Must be a number # rs485_name: 'RS485 1' # rs485_uart_id: 'uart_esp_3' # UART interface to which your inverter is connected # rs485_uart_baud_rate: '9600' # rs485_update_timeout: '10s' # rs485_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable # +------------------------------------------------------------------------------+ # | >>> DEBUG ( logger level must be DEBUG ) # +------------------------------------------------------------------------------+ device_debug: !include file: packages/base/device_debug_ESP32.yaml # file: packages/base/device_debug_ESP32_PSRAM.yaml vars: debug_name: 'Debug' debug_update_interval: '5s' # Size of your PSRAM in bits # 8Mb='8388608' | 6Mb='6291456' | 4Mb='4194304' | 2Mb='2097152' | NoPSRAM='0' debug_psram_size: '8388608' # +------------------------------------------------------------------------------+ # | >>> Add your custom packages below # +------------------------------------------------------------------------------+ # Custom packages # yambms_custom: !include yambms_custom.yaml # +------------------------------------------------------------------------------+ # | >>> Add your custom YAML below # +----- -------------------------------------------------------------------------+ # Custom YAML