# Updated : 2026.02.01 # Version : 1.2.4 # GitHub : https://github.com/Sleeper85/esphome-yambms # YamBMS ( Yet another multi-BMS Merging Solution ) # This YAML is free software: you can redistribute it and/or # modify it under the terms of the GNU General Public License # as published by the Free Software Foundation, either version 3 # of the License, or (at your option) any later version. # # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. # See the GNU General Public License for more details. # # You should have received a copy of the GNU General Public License # along with this program. If not, see . substitutions: # The ID of the LED on your board used for this component network_status_led_id: "esp_light" # ID for this component instance for fault registry network_fault_device_id: "1" esphome: on_boot: - priority: 600.0 then: - lambda: |- // Register System id(global_register_led)(${CAT_NETWORK}, ${network_fault_device_id}, id(${network_status_led_id})); sensor: # https://esphome.io/components/sensor/wifi_signal - platform: wifi_signal name: WiFi power id: esp32_wifi_power device_id: ${board_id} update_interval: 30s entity_category: diagnostic # Reports the WiFi signal strength in % - platform: template name: WiFi power percentage id: esp32_wifi_power_percent device_id: ${board_id} update_interval: 30s unit_of_measurement: '%' icon: mdi:wifi entity_category: diagnostic accuracy_decimals: 0 lambda: |- float wifi_power_dbm = id(esp32_wifi_power).state; return min(max(2 * (wifi_power_dbm + 100.0), 0.0), 100.0); text_sensor: # https://esphome.io/components/text_sensor/wifi_info - platform: wifi_info ip_address: name: IP address id: esp32_ip_address device_id: ${board_id} ssid: name: connected SSID id: esp32_connected_ssid device_id: ${board_id} bssid: name: connected BSSID id: esp32_connected_bssid device_id: ${board_id} mac_address: name: MAC address id: esp32_mac_address device_id: ${board_id} scan_results: name: latest scan results id: esp32_latest_scan_results device_id: ${board_id} dns_address: name: DNS address id: esp32_dns_address device_id: ${board_id} interval: - interval: 5s then: - lambda: |- // network::is_connected() can be used for wifi or ethernet. // It returns true if Ethernet or WiFi has a valid Link + IP. bool x = network::is_connected(); id(global_update_fault)(${CAT_NETWORK}, ${network_fault_device_id}, !x);