Files
esphome-yambms/examples/single-node/RP_BMS_example_EG4_LLV2_RS485_Modbus.yaml
Sleeper85 7d347ae626 Examples - Add bms_fake_equalizing_enabled
Every example including a BMS that ships Fake Equalizing (EG4 LL V2,
Seplos V1/V2, Seplos V3, Demo BMS) now declares
bms_fake_equalizing_enabled on each BMS, with a comment explaining what
enabling it does and warning that a BMS without a balancer can stay in
Cut-Off for a long time before reaching EOC.

The EG4 and Seplos examples set it to 'false', the package default. The
DEMO examples set it to 'true'.
2026-11-19 04:18:57 +01:00

79 lines
4.3 KiB
YAML

# Updated : 2026.08.29
# Version : 1.1.5
# GitHub : https://github.com/Sleeper85/esphome-yambms
# YamBMS ( Yet another multi-BMS Merging Solution )
# This YAML is free software: you can redistribute it and/or
# modify it under the terms of the GNU General Public License
# as published by the Free Software Foundation, either version 3
# of the License, or (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
# See the GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program. If not, see <http://www.gnu.org/licenses/gpl.html>.
############################ Remote Packages Example ###########################
# This is not a working YAML but just code ready to copy into
# your main YAML below the `packages:` section.
# packages:
# remote_packages:
# url: https://github.com/Sleeper85/esphome-yambms
# ref: main
# refresh: 60s
# files:
################################################################################
# EG4 Modbus
- path: 'packages/bms/bms_combine_EG4_RS485_modbus.yaml'
vars:
eg4_modbus_uart_id: 'uart_esp_1'
eg4_modbus_baud_rate: '9600'
# BMS 1
- path: 'packages/bms/bms_combine_EG4_LLV2_RS485_bms_full.yaml'
vars:
bms_id: '1' # must be a number
bms_name: 'EG4-BMS 1'
## BMS address must start at 2 with EG4 LLV2, ID 1 is a special case and has different output.
bms_address: 2 # BMS 1 modbus address
bms_balance_trigger_voltage: '0.030' # V. Cell spread at which the BMS balances, set yours
# Fake Equalizing: this BMS does not report its balancing state. When enabled, YamBMS infers it
# from the cell spread and holds the Cut-Off timer while the pack balances, instead of ending the charge.
# Warning: a BMS without a balancer (or with balancing disabled) never closes its cell spread, so it can
# stay in Cut-Off a long time, until the EOC timer (30min default) ends the charge, or forever if disabled.
bms_fake_equalizing_enabled: 'false' # true/false, false by default
bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable
# BMS 2
- path: 'packages/bms/bms_combine_EG4_LLV2_RS485_bms_full.yaml'
vars:
bms_id: '2' # must be a number
bms_name: 'EG4-BMS 2'
bms_address: 3 # BMS 2 modbus address
bms_balance_trigger_voltage: '0.030' # V. Cell spread at which the BMS balances, set yours
# Fake Equalizing: this BMS does not report its balancing state. When enabled, YamBMS infers it
# from the cell spread and holds the Cut-Off timer while the pack balances, instead of ending the charge.
# Warning: a BMS without a balancer (or with balancing disabled) never closes its cell spread, so it can
# stay in Cut-Off a long time, until the EOC timer (30min default) ends the charge, or forever if disabled.
bms_fake_equalizing_enabled: 'false' # true/false, false by default
bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable
# BMS 3
- path: 'packages/bms/bms_combine_EG4_LLV2_RS485_bms_full.yaml'
vars:
bms_id: '3' # must be a number
bms_name: 'EG4-BMS 3'
bms_address: 4 # BMS 3 modbus address
bms_balance_trigger_voltage: '0.030' # V. Cell spread at which the BMS balances, set yours
# Fake Equalizing: this BMS does not report its balancing state. When enabled, YamBMS infers it
# from the cell spread and holds the Cut-Off timer while the pack balances, instead of ending the charge.
# Warning: a BMS without a balancer (or with balancing disabled) never closes its cell spread, so it can
# stay in Cut-Off a long time, until the EOC timer (30min default) ends the charge, or forever if disabled.
bms_fake_equalizing_enabled: 'false' # true/false, false by default
bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable