Files
esphome-yambms/examples/single-node/RP_BMS_example_SEPLOS_V3_RS485_sniffer.yaml
Sleeper85 7d347ae626 Examples - Add bms_fake_equalizing_enabled
Every example including a BMS that ships Fake Equalizing (EG4 LL V2,
Seplos V1/V2, Seplos V3, Demo BMS) now declares
bms_fake_equalizing_enabled on each BMS, with a comment explaining what
enabling it does and warning that a BMS without a balancer can stay in
Cut-Off for a long time before reaching EOC.

The EG4 and Seplos examples set it to 'false', the package default. The
DEMO examples set it to 'true'.
2026-11-19 04:18:57 +01:00

101 lines
5.8 KiB
YAML
Raw Permalink Blame History

This file contains invisible Unicode characters
This file contains invisible Unicode characters that are indistinguishable to humans but may be processed differently by a computer. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.
# Updated : 2026.02.16
# Version : 1.1.4
# GitHub : https://github.com/Sleeper85/esphome-yambms
# YamBMS ( Yet another multi-BMS Merging Solution )
# This YAML is free software: you can redistribute it and/or
# modify it under the terms of the GNU General Public License
# as published by the Free Software Foundation, either version 3
# of the License, or (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
# See the GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program. If not, see <http://www.gnu.org/licenses/gpl.html>.
############################ Remote Packages Example ###########################
# This is not a working YAML but just code ready to copy into
# your main YAML below the `packages:` section.
# packages:
# remote_packages:
# url: https://github.com/Sleeper85/esphome-yambms
# ref: main
# refresh: 60s
# files:
################################################################################
# Seplos Parser
- path: 'packages/bms/bms_combine_SEPLOS_V3_RS485_modbus_sniffer.yaml'
vars:
seplos_uart_id: 'uart_esp_1'
seplos_baud_rate: '19200' # 9600 / 19200 ; please set the baudrate of your Seplos BMS model here
seplos_bms_count: '3' # Seplos V3 BMS count
seplos_update_interval: '3' # # Time in seconds, update interval for all data points
# BMS 1
- path: 'packages/bms/bms_combine_SEPLOS_V3_RS485_bms_full.yaml'
vars:
bms_id: '1'
bms_prefix: 'bms0' # DON'T CHANGE THIS NAME !
bms_name: 'SEPLOS-BMS 1'
# Required settings cannot be retrieved from BMS
# These values ​​must match your BMS settings
bms_max_charge_current: '100' # A. The maximum current your BMS can handle
bms_max_discharge_current: '100' # A. The maximum current your BMS can handle
# LFP values example
bms_cell_ovp: '3.650' # V. Used by 'Auto CCL' functions
bms_cell_uvp: '2.800' # V. Used by 'Auto DCL' functions and to calculate maximum discharge voltage
bms_balance_trigger_voltage: '0.010' # V. Used by 'Auto CVL' functions
# Fake Equalizing: this BMS does not report its balancing state. When enabled, YamBMS infers it
# from the cell spread and holds the Cut-Off timer while the pack balances, instead of ending the charge.
# Warning: a BMS without a balancer (or with balancing disabled) never closes its cell spread, so it can
# stay in Cut-Off a long time, until the EOC timer (30min default) ends the charge, or forever if disabled.
bms_fake_equalizing_enabled: 'false' # true/false, false by default
bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable
# BMS 2
- path: 'packages/bms/bms_combine_SEPLOS_V3_RS485_bms_full.yaml'
vars:
bms_id: '2'
bms_prefix: 'bms1' # DON'T CHANGE THIS NAME !
bms_name: 'SEPLOS-BMS 2'
# Required settings cannot be retrieved from BMS
bms_max_charge_current: '100' # A. The maximum current your BMS can handle
bms_max_discharge_current: '100' # A. The maximum current your BMS can handle
# These values ​​must match your BMS settings
# LFP values example
bms_cell_ovp: '3.650' # V. Used by 'Auto CCL' functions
bms_cell_uvp: '2.800' # V. Used by 'Auto DCL' functions and to calculate maximum discharge voltage
bms_balance_trigger_voltage: '0.010' # V. Used by 'Auto CVL' functions
# Fake Equalizing: this BMS does not report its balancing state. When enabled, YamBMS infers it
# from the cell spread and holds the Cut-Off timer while the pack balances, instead of ending the charge.
# Warning: a BMS without a balancer (or with balancing disabled) never closes its cell spread, so it can
# stay in Cut-Off a long time, until the EOC timer (30min default) ends the charge, or forever if disabled.
bms_fake_equalizing_enabled: 'false' # true/false, false by default
bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable
# BMS 3
- path: 'packages/bms/bms_combine_SEPLOS_V3_RS485_bms_full.yaml'
vars:
bms_id: '3'
bms_prefix: 'bms2' # DON'T CHANGE THIS NAME !
bms_name: 'SEPLOS-BMS 3'
# Required settings cannot be retrieved from BMS
bms_max_charge_current: '100' # A. The maximum current your BMS can handle
bms_max_discharge_current: '100' # A. The maximum current your BMS can handle
# These values ​​must match your BMS settings
# LFP values example
bms_cell_ovp: '3.650' # V. Used by 'Auto CCL' functions
bms_cell_uvp: '2.800' # V. Used by 'Auto DCL' functions and to calculate maximum discharge voltage
bms_balance_trigger_voltage: '0.010' # V. Used by 'Auto CVL' functions
# Fake Equalizing: this BMS does not report its balancing state. When enabled, YamBMS infers it
# from the cell spread and holds the Cut-Off timer while the pack balances, instead of ending the charge.
# Warning: a BMS without a balancer (or with balancing disabled) never closes its cell spread, so it can
# stay in Cut-Off a long time, until the EOC timer (30min default) ends the charge, or forever if disabled.
bms_fake_equalizing_enabled: 'false' # true/false, false by default
bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable