3.2 KiB
3.2 KiB
YamBMS - JK RS485 DISPLAY
Important
The most important thing for proper functioning of YamBMS is that the voltage of your BMS is well calibrated. YamBMS logic is based on the
min_cell_voltageandmax_cell_voltagevoltages of your BMS.
External component
Schematic and setup instructions
Caution
The
jk_bms_displaycomponent does not provide all the information needed for an optimal operation ofYamBMS. The missing information has been added in the code by fixed values. e.g. it's not possible to know if the BMS isonlineor if the BMS isequalizingthe cells.
JK-B2A8S20P
│ JK-B2A8S20P │
│ │
│ Temp CAN GPS Display Balancer │
└──[oooo]──[ooo]──[oooo]──[oooooo]──[oooooooooo]──┘
││││││
│││││└─ K-
││││└── K+
│││└─── GND ( not common with B- , isolated ? )
││└──── B
│└───── A
└────── VCC = +/- 11.5V
JK-BD6A2xS10P and JK-BxA24SxxP
│ JK-BD6A2xS10P, JK-BxA24SxxP │
│ │
│ CAN GPS Display Heat │
└────[ooo]─[oooo]───[oooooo]───[ooooooo]──────────┘
││││││
│││││└─ VCC ┌───────────────┐ ┌─────────────────┐
││││└── A ────────│A+ GND│────────│GND │
│││└─── B ────────│B- RS485 RXD│────────│RX ESP32/ │
││└──── GND │ to TTL TXD│ │TX ESP8266 GND│──────
│└───── K+ │ module VCC│────────│5V VCC│──────
└────── K- └───────────────┘ └─────────────────┘
Power Button
K- o-------[ 100kΩ ]-----o /
/---|
K+ o---------------------o/