ESPHome 2026.11 makes `relation` a required option for every entry under `esphome: devices:`, and 2026.10 rejects that key. Both changes have to land together, so raise min_version to 2026.11.0 in the same commit. Use `relation: via` on all ten device declarations (BMS, sniffer, shunt, balancer, Deye stack, board, YamBMS instance, CAN and RS485 links). It is the value the API assumed before the key existed, so Home Assistant keeps showing the devices exactly as before. `child` would fit the board, the YamBMS instance and the inverter links better, but it is left for later: a Home Assistant release that reads the field without supporting `child` drops those devices and their entities. Docs: ESPHome 2026.11.0 in README and Installation_procedure (which still said 2025.11.0), Design_decisions no longer equates min_version with the flow_control requirement, and Coding_conventions documents the `relation: via` rule.
5.0 KiB
YamBMS - Installation procedure
Make your YAML
Tip
Not sure which YAML to choose ? ... YamBMS_Remote_Packages_example.yaml is a good basis for creating your custom YAML. Examples of
BMSandShuntpackages can be found in the examples folder. You don't have to import a shunt but you must import at leastone BMS. You can mix differentBMSmodels, the only condition is that thebms_idare numbered in order starting from1!
Installation from the ESPHome Builder add-on of your Home Assistant server
Tip
This method is the easiest for beginners.
Prerequisites: install the ESPHome Builder add-on in your Home Assistant server.
1. Enter your WiFi credentials in the SECRETS YAML in the top right corner
Copy, past and enter your credentials :
# WiFi
wifi_ssid: Your_SSID
wifi_password: Your_Password
domain: .local
# WiFi AP
wifi_ap_ssid: Your_AP_SSID
wifi_ap_password: Your_AP_Password
# Web Server
web_server_username: Your_Username
web_server_password: Your_Password
2. Add your ESP32 by clicking on + NEW DEVICE at the bottom right
Follow the procedure displayed on the screen.
3. EDIT your newly added ESP32 and copy your YamBMS RP YAML
Important
If your ESP32 already contains
APIorOTAkeys, don't forget to add them to your YAML.
4. Install your YAML Wirelessly or via USB port
Follow the procedure displayed on the screen.
5. Optional but recommended, add the ESP32 in your Home Assistant server
In Home Assistant under " Settings > Devices and services > Add Intergration " select ESPHome add device yambms if found or supply ip address of ESP32.
Installation from a Windows, Mac or Linux computer
1. Install ESPHome on your computer
Before you can flash your ESP32 you need to install the ESPHome 2026.11.0 or higher command line application.
Follow these instructions for installation on Windows, Mac or Linux.
Tip
If you are using Windows install the
setuptoolspackage in addition towheelandesphome.
pip3 install setuptools
pip3 install wheel
pip3 install esphome
2. Download all YAML files to your computer
Tip
The
packagesfolder is not necessary if you are compiling theRemote Packagesversion of the YAML.
You can do this from the command line or in your preferred method.
You need to gather the following three points in the same folder. If you are compiling from your HA server use the Samba Share add-on so that you can copy the packages folder to the esphome folder on the HA server.
- the
packagesfolder (not necessary withRPYAMLs) - your
secrets.yaml - your custom
main.yaml
# Clone this external component
git clone https://github.com/Sleeper85/esphome-yambms.git
cd esphome-yambms
3. Enter your WiFi credentials in the secrets.yaml files
# WiFi
wifi_ssid: Your_SSID
wifi_password: Your_Password
domain: .local
# WiFi AP
wifi_ap_ssid: Your_AP_SSID
wifi_ap_password: Your_AP_Password
# Web Server
web_server_username: Your_Username
web_server_password: Your_Password
4. Install the YamBMS.yaml into your ESP32
# install your YamBMS.yaml
# validate the configuration, create a binary, upload it, and start logs.
esphome run YamBMS.yaml
# upgrade via OTA by specifying the IP address of the ESP32
esphome run YamBMS.yaml --device 192.168.x.x
5. Optional but recommended, add the ESP32 in your Home Assistant server
In Home Assistant under " Settings > Devices and services > Add Intergration " select ESPHome add device yambms if found or supply ip address of ESP32.
Other ESPHome command-line
# clean files before compiling again
esphome clean YamBMS.yaml
# test the config
esphome config YamBMS.yaml
# install the config in ESP32
esphome run YamBMS.yaml
# compile the firmware.bin
esphome compile YamBMS.yaml
# check the logs (the --device option is not required)
esphome logs YamBMS.yaml --device 192.168.x.x
Debugging
If this component doesn't work out of the box for your device please update your configuration to increase the log level to DEBUG.
logger:
level: DEBUG
