Files
esphome-yambms/examples/single-node/LP_BMS_example_JK-PB_RS485_Modbus_mode1.yaml
T

101 lines
3.9 KiB
YAML

# Updated : 2026.02.03
# Version : 1.1.4
# GitHub : https://github.com/Sleeper85/esphome-yambms
# YamBMS ( Yet another multi-BMS Merging Solution )
# This YAML is free software: you can redistribute it and/or
# modify it under the terms of the GNU General Public License
# as published by the Free Software Foundation, either version 3
# of the License, or (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
# See the GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program. If not, see <http://www.gnu.org/licenses/gpl.html>.
############################ Local Packages Example ############################
# This is not a working YAML but just code ready to copy into your main YAML.
################################################################################
packages:
# The sniffer represents the ESP node connected to the JK-BMS PB RS485 bus
# If address 0x00 is not detected on the RS485 bus, the sniffer will act directly as a master BMS (mode 1, max 16 BMS)
# RS485 Sniffer with talk_pin (WS-RS485-CAN and other RS485 boards with a flow_control_pin)
# sniffer1: !include
# file: packages/bms/bms_combine_JK_RS485_Modbus_sniffer_talk_pin.yaml
# vars:
# sniffer_protocol: 'JK02_32S'
# sniffer_uart_id: 'uart_esp_1'
# sniffer_talk_pin: ${talk_pin} # can be replaced by the GPIO number
sniffer1: !include
file: packages/bms/bms_combine_JK_RS485_Modbus_sniffer.yaml
vars:
sniffer_protocol: 'JK02_32S'
sniffer_uart_id: 'uart_esp_1'
# Mode1 : configure the DIP switches of your BMS from 0x00 to 0x0F (max 16 BMS)
bms1: !include
file: packages/bms/bms_combine_JK_RS485_Modbus_bms_full.yaml
vars:
bms_id: '1' # must be a number
bms_name: 'JK-BMS 1'
bms_address: '0x00' # BMS 1 DIP switch
bms_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable
bms2: !include
file: packages/bms/bms_combine_JK_RS485_Modbus_bms_full.yaml
vars:
bms_id: '2' # must be a number
bms_name: 'JK-BMS 2'
bms_address: '0x01' # BMS 2 DIP switch
bms_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable
bms3: !include
file: packages/bms/bms_combine_JK_RS485_Modbus_bms_full.yaml
vars:
bms_id: '3' # must be a number
bms_name: 'JK-BMS 3'
bms_address: '0x02' # BMS 3 DIP switch
bms_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable
bms4: !include
file: packages/bms/bms_combine_JK_RS485_Modbus_bms_full.yaml
vars:
bms_id: '4' # must be a number
bms_name: 'JK-BMS 4'
bms_address: '0x03' # BMS 4 DIP switch
bms_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable
bms5: !include
file: packages/bms/bms_combine_JK_RS485_Modbus_bms_full.yaml
vars:
bms_id: '5' # must be a number
bms_name: 'JK-BMS 5'
bms_address: '0x04' # BMS 5 DIP switch
bms_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable
bms6: !include
file: packages/bms/bms_combine_JK_RS485_Modbus_bms_full.yaml
vars:
bms_id: '6' # must be a number
bms_name: 'JK-BMS 6'
bms_address: '0x05' # BMS 6 DIP switch
bms_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable
bms7: !include
file: packages/bms/bms_combine_JK_RS485_Modbus_bms_full.yaml
vars:
bms_id: '7' # must be a number
bms_name: 'JK-BMS 7'
bms_address: '0x06' # BMS 7 DIP switch
bms_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable