Files
esphome-yambms/examples/single-node/LP_BMS_example_SEPLOS_V3_RS485_sniffer.yaml
T
Sleeper85 7d347ae626 Examples - Add bms_fake_equalizing_enabled
Every example including a BMS that ships Fake Equalizing (EG4 LL V2,
Seplos V1/V2, Seplos V3, Demo BMS) now declares
bms_fake_equalizing_enabled on each BMS, with a comment explaining what
enabling it does and warning that a BMS without a balancer can stay in
Cut-Off for a long time before reaching EOC.

The EG4 and Seplos examples set it to 'false', the package default. The
DEMO examples set it to 'true'.
2026-11-19 04:18:57 +01:00

99 lines
5.4 KiB
YAML
Raw Blame History

This file contains invisible Unicode characters
This file contains invisible Unicode characters that are indistinguishable to humans but may be processed differently by a computer. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.
# Updated : 2026.02.16
# Version : 1.1.4
# GitHub : https://github.com/Sleeper85/esphome-yambms
# YamBMS ( Yet another multi-BMS Merging Solution )
# This YAML is free software: you can redistribute it and/or
# modify it under the terms of the GNU General Public License
# as published by the Free Software Foundation, either version 3
# of the License, or (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
# See the GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program. If not, see <http://www.gnu.org/licenses/gpl.html>.
############################ Local Packages Example ############################
# This is not a working YAML but just code ready to copy into
# your main YAML below the `packages:` section.
################################################################################
packages:
seplos_parser: !include
file: packages/bms/bms_combine_SEPLOS_V3_RS485_modbus_sniffer.yaml
vars:
seplos_uart_id: 'uart_esp_1'
seplos_baud_rate: '19200' # 9600 / 19200 ; please set the baudrate of your Seplos BMS model here
seplos_bms_count: '3' # Seplos V3 BMS count
seplos_update_interval: '3' # # Time in seconds, update interval for all data points
bms1: !include
file: packages/bms/bms_combine_SEPLOS_V3_RS485_bms_full.yaml
vars:
bms_id: '1'
bms_prefix: 'bms0' # DON'T CHANGE THIS NAME !
bms_name: 'SEPLOS-BMS 1'
# Required settings cannot be retrieved from BMS
# These values ​​must match your BMS settings
bms_max_charge_current: '100' # A. The maximum current your BMS can handle
bms_max_discharge_current: '100' # A. The maximum current your BMS can handle
# LFP values example
bms_cell_ovp: '3.650' # V. Used by 'Auto CCL' functions
bms_cell_uvp: '2.800' # V. Used by 'Auto DCL' functions and to calculate maximum discharge voltage
bms_balance_trigger_voltage: '0.010' # V. Used by 'Auto CVL' functions
# Fake Equalizing: this BMS does not report its balancing state. When enabled, YamBMS infers it
# from the cell spread and holds the Cut-Off timer while the pack balances, instead of ending the charge.
# Warning: a BMS without a balancer (or with balancing disabled) never closes its cell spread, so it can
# stay in Cut-Off a long time, until the EOC timer (30min default) ends the charge, or forever if disabled.
bms_fake_equalizing_enabled: 'false' # true/false, false by default
bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable
bms2: !include
file: packages/bms/bms_combine_SEPLOS_V3_RS485_bms_full.yaml
vars:
bms_id: '2'
bms_prefix: 'bms1' # DON'T CHANGE THIS NAME !
bms_name: 'SEPLOS-BMS 2'
# Required settings cannot be retrieved from BMS
# These values ​​must match your BMS settings
bms_max_charge_current: '100' # A. The maximum current your BMS can handle
bms_max_discharge_current: '100' # A. The maximum current your BMS can handle
# LFP values example
bms_cell_ovp: '3.650' # V. Used by 'Auto CCL' functions
bms_cell_uvp: '2.800' # V. Used by 'Auto DCL' functions and to calculate maximum discharge voltage
bms_balance_trigger_voltage: '0.010' # V. Used by 'Auto CVL' functions
# Fake Equalizing: this BMS does not report its balancing state. When enabled, YamBMS infers it
# from the cell spread and holds the Cut-Off timer while the pack balances, instead of ending the charge.
# Warning: a BMS without a balancer (or with balancing disabled) never closes its cell spread, so it can
# stay in Cut-Off a long time, until the EOC timer (30min default) ends the charge, or forever if disabled.
bms_fake_equalizing_enabled: 'false' # true/false, false by default
bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable
bms3: !include
file: packages/bms/bms_combine_SEPLOS_V3_RS485_bms_full.yaml
vars:
bms_id: '3'
bms_prefix: 'bms2' # DON'T CHANGE THIS NAME !
bms_name: 'SEPLOS-BMS 3'
# Required settings cannot be retrieved from BMS
# These values ​​must match your BMS settings
bms_max_charge_current: '100' # A. The maximum current your BMS can handle
bms_max_discharge_current: '100' # A. The maximum current your BMS can handle
# LFP values example
bms_cell_ovp: '3.650' # V. Used by 'Auto CCL' functions
bms_cell_uvp: '2.800' # V. Used by 'Auto DCL' functions and to calculate maximum discharge voltage
bms_balance_trigger_voltage: '0.010' # V. Used by 'Auto CVL' functions
# Fake Equalizing: this BMS does not report its balancing state. When enabled, YamBMS infers it
# from the cell spread and holds the Cut-Off timer while the pack balances, instead of ending the charge.
# Warning: a BMS without a balancer (or with balancing disabled) never closes its cell spread, so it can
# stay in Cut-Off a long time, until the EOC timer (30min default) ends the charge, or forever if disabled.
bms_fake_equalizing_enabled: 'false' # true/false, false by default
bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable