Files
esphome-yambms/packages
Sleeper85 6973cee171 PVbrain2 board split into two DevKitC-1 pin variants
The DevKitC-1 swapped the RGB LED between V1.0 (GPIO 48) and V1.1 (GPIO 38),
and the freed pin is the one PVbrain2 uses for CAN TX. Both pins are therefore
board-revision dependent and cannot stay hardcoded in a single board file.

board_ESP32-S3_DevKitC-1_PVbrain2.yaml becomes the common base :
- tx_pin_4 / rx_pin_4 and the LED strip pin are removed from it
- esp_light now reads ${rgb_led_pin}
- GPLv3 header added, which was missing

Two thin wrappers provide the revision-specific pins and include the base :
- board_ESP32-S3_DevKitC-1_PVbrain2_LED-48.yaml : V1.0, LED 48 / CAN TX 38
- board_ESP32-S3_DevKitC-1_PVbrain2_LED-38.yaml : V1.1, LED 38 / CAN TX 48

YamBMS_LP_PVbrain2.yaml and YamBMS_RP_PVbrain2.yaml include the LED-48 variant,
the LED-38 line being commented right next to it.

Same split applied to the RS485 Pylontech package : the content moves to
yambms_rs485_pylon_core.yaml and yambms_rs485_pylon.yaml keeps only the uart
baud_rate extend, so PVbrain2 — whose board already declares the UART — can
include the core directly.

PCB LED 1 / PCB LED 2 / ESP32 LED are no longer prefixed by ${name}, and the
`name` substitution is added to the PVbrain2 root YAMLs.
2026-11-08 23:08:33 +01:00
..
2026-11-08 23:08:33 +01:00
2026-11-08 23:08:33 +01:00