Files
esphome-yambms/packages/board/board_ESP32_Generic.yaml
T

88 lines
2.3 KiB
YAML

# Updated : 2026.02.15
# Version : 1.3.4
# GitHub : https://github.com/Sleeper85/esphome-yambms
# YamBMS ( Yet another multi-BMS Merging Solution )
# This YAML is free software: you can redistribute it and/or
# modify it under the terms of the GNU General Public License
# as published by the Free Software Foundation, either version 3
# of the License, or (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
# See the GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program. If not, see <http://www.gnu.org/licenses/gpl.html>.
substitutions:
board_chip: "ESP32"
board_name: "Generic"
# Interfaces GPIOs
# uart_esp_1
tx_pin_1: '17'
rx_pin_1: '16'
# uart_esp_2
tx_pin_2: '19'
rx_pin_2: '18'
# uart_esp_3
tx_pin_3: '26'
rx_pin_3: '25'
# canbus_esp32_can
tx_pin_4: '23'
rx_pin_4: '22'
# canbus_mcp2515
spi_mosi_pin: '13'
spi_miso_pin: '12'
spi_clk_pin: '14'
mcp2515_cs_pin: '15'
# talk_pin
talk_pin: '4' # ESP32: 4, ESP32-S3: 8, ESP32-C3: 10
# LED
board_has_rgb: "false" # LED `RGB` flag to show functionality is available
packages:
device_base: !include ../base/device_base.yaml
device_base_wifi: !include ../base/device_base_wifi.yaml
led_control: !include board_options_led_control.yaml
esp32:
variant: esp32
cpu_frequency: 240MHz
framework:
type: esp-idf
esphome:
platformio_options:
board_build.flash_mode: dio # use Dual IO (dio) instead of Quad IO (qio) to prevent boot loop after flashing
wifi:
id: my_network
ssid: !secret wifi_ssid
password: !secret wifi_password
domain: !secret domain
reboot_timeout: 0s
logger:
baud_rate: 0 # frees the 3rd UART and avoids some bugs like "WK2168 with canbus" or "BLE client with RS485 modbus"
# +--------------------------------------+
# | Inverter Heartbeat Light |
# +--------------------------------------+
light:
# ESP Light used to see the inverter heartbeat
# Internal : only specifying an id without a name will implicitly set this to true.
- platform: binary
output: esp_led
id: esp_light
output:
# ESP LED
- platform: gpio
pin: 2
id: esp_led
inverted: true