Files
esphome-yambms/multi-bms_DEMO.yaml
T
2025-01-18 06:35:01 +01:00

232 lines
9.6 KiB
YAML

# Updated : 2025.01.16
# Version : 1.5.3
# GitHub : https://github.com/Sleeper85/esphome-yambms
# YamBMS ( Yet another multi-BMS Merging Solution )
# This YAML is free software: you can redistribute it and/or
# modify it under the terms of the GNU General Public License
# as published by the Free Software Foundation, either version 3
# of the License, or (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
# See the GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program. If not, see <http://www.gnu.org/licenses/gpl.html>.
substitutions:
name: yambms-demo
# Don't forget to configure your WiFi credentials in the secrets.yaml file
#
# If needed, configure a static IP here
# wifi:
# manual_ip:
# static_ip: 192.168.0.85
# gateway: 192.168.0.1
# subnet: 255.255.255.0
# dns1: 8.8.8.8
# dns2: 8.8.4.4
logger:
level: DEBUG # DEBUG / INFO / WARN
ota:
platform: esphome
# Please use the native `api` component instead of the `mqtt` section.
# If you use Home Assistant, the native API is more lightweight.
# If there is no HA server connected to this API, the ESP32 reboots every 15 minutes to try to resolve the problem.
# The "reboot_timeout: 0s" option will keep your ESP32 up and running even if you lose connection to your HA server.
api:
reboot_timeout: 0s
# If you don't want to use ESPHome's native API you can use MQTT instead.
# In this case don't forget to remove the 'api:' section.
# mqtt:
# broker: !secret mqtt_host
# username: !secret mqtt_username
# password: !secret mqtt_password
# id: mqtt_client
# Please note that enabling this component will take up a lot of memory and may decrease
# stability and be the cause of reboot depending on the capabilities of the board used.
#web_server:
# port: 80
# log: false
# ota: false
# +--------------------------------------+
# | Packages |
# +--------------------------------------+
# PLEASE READ : https://github.com/Sleeper85/esphome-yambms/blob/main/documents/README/YamBMS_main_YAML_HowTo.md
packages:
############### >>> UNCOMMENT YOUR BOARD <<< ###############
# This list is incomplete, other board.yaml are available in the board folder
device_board: !include packages/board/board_ESP32_Generic.yaml
# device_board: !include packages/board/board_ESP32_DevKit-V1.yaml
# device_board: !include packages/board/board_ESP32_LilyGo-T-CAN485.yaml
# device_board: !include packages/board/board_ESP32-C3_ETH01-EVO.yaml
# device_board: !include packages/board/board_ESP32-S3_DevKitC-1.yaml
# device_board: !include packages/board/board_ESP32-S3_LilyGo-T-Connect.yaml
# device_board: !include packages/board/board_ESP32-S3_AtomS3-Lite.yaml
# device_board: !include
# file: packages/board/board_ESP32-S3_AtomS3.yaml # board_ESP32-S3_AtomS3R.yaml
# vars:
# display_auto_next_page_interval: '5s'
############################################################
# Config : this YAML contains the settings shared between all ESP32s
config_yambms: !include packages/config/config_yambms.yaml
config_captive_portal: !include packages/config/config_captive_portal.yaml
shunt1: !include
file: packages/shunt/shunt_combine_FAKE.yaml
vars:
shunt_id: '1' # must be a number
shunt_name: 'Shunt 1'
# Shunt sensors values
shunt_voltage: '53.41' # V
shunt_current: '37.5' # A
shunt_power: '2003' # W
shunt_soc: '86' # %
bms1: !include
file: packages/bms/bms_combine_FAKE.yaml
vars:
bms_id: '1' # must be a number
bms_name: 'BMS 1'
# BMS sensors values
bms_battery_capacity: '280' # Ah
bms_battery_capacity_remaining: '243' # Ah
bms_voltage: '53.45' # V
bms_current: '9.2' # A
bms_power: '492' # W
bms_soc: '87' # %
bms_min_cell_voltage: '3.339' # V
bms_min_voltage_cell: '2' # cell number 1~16
bms_max_cell_voltage: '3.341' # V
bms_max_voltage_cell: '11' # cell number 1~16
bms_temperature_sensor_1: '21.1' # °C
bms_temperature_sensor_2: '21.3' # °C
bms_temperature_sensor_3: '21.5' # °C
bms_temperature_sensor_4: '21.7' # °C
bms_max_charge_current: '100' # A
bms_max_discharge_current: '100' # A
bms_cell_ovp: '3.650' # V Used by 'Auto CCL' functions
bms_cell_uvp: '2.800' # V Used by 'Auto DCL' functions and to calculate maximum discharge voltage
bms_balance_trigger_voltage: '0.010' # V Used by 'Auto CVL' functions
bms_charging_cycles: '178' # charging cycles number Used to calculate the SoH
bms2: !include
file: packages/bms/bms_combine_FAKE.yaml
vars:
bms_id: '2' # must be a number
bms_name: 'BMS 2'
# BMS sensors values
bms_battery_capacity: '280' # Ah
bms_battery_capacity_remaining: '238' # Ah
bms_voltage: '53.41' # V
bms_current: '11.3' # A
bms_power: '604' # W
bms_soc: '85' # %
bms_min_cell_voltage: '3.337' # V
bms_min_voltage_cell: '14' # cell number 1~16
bms_max_cell_voltage: '3.339' # V
bms_max_voltage_cell: '3' # cell number 1~16
bms_temperature_sensor_1: '21.8' # °C
bms_temperature_sensor_2: '21.6' # °C
bms_temperature_sensor_3: '21.4' # °C
bms_temperature_sensor_4: '21.2' # °C
bms_max_charge_current: '100' # A
bms_max_discharge_current: '100' # A
bms_cell_ovp: '3.650' # V Used by 'Auto CCL' functions
bms_cell_uvp: '2.800' # V Used by 'Auto DCL' functions and to calculate maximum discharge voltage
bms_balance_trigger_voltage: '0.010' # V Used by 'Auto CVL' functions
bms_charging_cycles: '226' # charging cycles number Used to calculate the SoH
bms3: !include
file: packages/bms/bms_combine_FAKE.yaml
vars:
bms_id: '3' # must be a number
bms_name: 'BMS 3'
# BMS sensors values
bms_battery_capacity: '280' # Ah
bms_battery_capacity_remaining: '232' # Ah
bms_voltage: '53.37' # V
bms_current: '15.7' # A
bms_power: '838' # W
bms_soc: '83' # %
bms_min_cell_voltage: '3.334' # V
bms_min_voltage_cell: '7' # cell number 1~16
bms_max_cell_voltage: '3.336' # V
bms_max_voltage_cell: '9' # cell number 1~16
bms_temperature_sensor_1: '21.9' # °C
bms_temperature_sensor_2: '22.0' # °C
bms_temperature_sensor_3: '22.1' # °C
bms_temperature_sensor_4: '22.2' # °C
bms_max_charge_current: '100' # A
bms_max_discharge_current: '100' # A
bms_cell_ovp: '3.650' # V Used by 'Auto CCL' functions
bms_cell_uvp: '2.800' # V Used by 'Auto DCL' functions and to calculate maximum discharge voltage
bms_balance_trigger_voltage: '0.010' # V Used by 'Auto CVL' functions
bms_charging_cycles: '194' # charging cycles number Used to calculate the SoH
yambms1: !include
file: packages/yambms/yambms.yaml
vars:
# Please read the cut-off charging logic README to understand how the YamBMS works
yambms_update_interval: '1s'
# Input numbers can be displayed as a slider or an input box, options are 'slider' or 'box'.
yambms_input_number_mode: 'slider'
# Please check and fill in the options below correctly according to your battery chemistry and number of cells in series.
# These parameters are important and used for charging logic.
# Battery Chemistry
yambms_battery_chemistry: '1' # 1-LFP | 2-Li-ion | 3-LTO
# Number of cells in series
yambms_cell_count: '16'
# Bulk / Absorption Voltage : corresponds to the Bulk voltage that will be used to charge the battery. (LFP : 55.2V = 3.45V/Cell for 16S battery)
yambms_bulk_v: '55.2'
# Float Voltage : corresponds to the voltage at which the battery would be maintained at the end of charge. (LFP : 53.6V = 3.35V/Cell for 16S battery)
yambms_float_v: '53.6'
# Rebulk voltage, voltage from which a new Bulk charge can start. (LFP : 52.8V = 3.3V/Cell for 16S battery)
yambms_rebulk_v: '52.8'
# Maximum time in minutes that the cut-off step can last before charging is complete
# If your cells are properly balanced this step ends at the fastest after the `cut-off timer`
# This timer can be deactivated with a switch
yambms_eoc_timer: '30'
# Time in seconds during which the end of charge conditions must be respected (cut-off + cells not equalizing)
yambms_cutoff_timer: '60'
# Maximum charging cycles is used to calculate the battey SOH, LF280K v3 =8000.0, LF280K v2 =6000.0, LF280=3000.0 (decimal is required)
yambms_max_cycles: '6000.0'
canbus1: !include
file: packages/yambms/yambms_canbus.yaml
vars:
canbus_id: 'canbus1'
canbus_name: 'CANBUS 1'
canbus_node_id: 'canbus_node1'
canbus_light_id: 'esp_light'
# The CANBUS link will be considered down if no response from the inverter (ID 0x305) for 5s
# The Deye inverter sends the ACK (can_id 0x305) only when it receives the can_id 0x356
canbus_link_timer: '5s'
# +--------------------------------------+
# | DEBUG ( logger level must be DEBUG ) |
# +--------------------------------------+
device_debug: !include
file: packages/base/device_debug_ESP32.yaml
vars:
debug_name: 'Debug'
debug_update_interval: '5s'