2.9 KiB
2.9 KiB
Victron SmartShunt How To
UART : Schematic
Caution
Please read this page about setting up galvanic isolation of the
UART-TTLconnection.
Tip
If you are unsure about to pin order please measure the voltage between GND and VCC (5V). If you measure a positive voltage you know the position of VCC and GND!
┌─────────────────┐ ┌──────────┐ ┌───────────┐
│ 5V o│<----5V---V1>│ |<V2---3V3--->| |
│ Victron RX o│<---------AO<│ UART-TTL │<AI-------TX<| ESP32 |
│ SmartShunt TX o│>---------AI>│ ISOLATOR │>BO-------RX>| |
│ GND o│<----GND---->│ │<----GND---->| |
└─────────────────┘ └──────────┘ └───────────┘
# UART-TTL VE.Direct port (JST-PH 2.0mm pinch)
┌─── ─────── ────┐
│ │
│ O O O O │
│GND RX TX VCC │
└────────────────┘
│ │ │ └ 5V
│ │ └──── TX to TTL-isolator AI (input)
│ └──────── RX to TTL-isolator AO (output)
└──────────── GND to TTL-isolator GND
Bluetooth : How to retrieve MAC address and encryption key
To connect to your Victron device with BLE component you must have two information :
mac_address- Bluetooth mac address of device.encryption_key- AES encryption key.
Use VictronConnect App v5.93 (or later) released on 2023-08-25.
- Open
Settingsof Device. - Open
Product Infopage. - Ensure
Instant readout via Bluetoothis enabled. - Bottom of page press
SHOWfor Instant readout details Encryption data.
When connected to the device via VictronConnect App no Instant readout (Bluetooth advertising) data is generated.


