11 KiB
11 KiB
YamBMS - Changelog
- YamBMS 1.5.8 :
- New Dashboards
1.5.8compatible withCANBUSandRS485inverter communication protocol - Added BMS
SEPLOS V3(beta) - Added YamBMS
Web Server v3 - Added
WiFi AP WiFi APandWeb Servercredentials centralized insecrets.yaml- Added
WT32-ETH01board - Fixed issue 8 ETH01-EVO board - Davicom DM9051 SPI Ethernet Controller is now integrated in esphome
2025.7 - Fixed issue 24 [JK-PB] SoC never reaches 100%
- Fixed issue 63 [JK RS485 component] Fix ._SCHEMA deprecations
- Merged PR 67 Add options to restrict max. charge and discharge current
- Merged PR 72 Add Pylontech RS485 inverter protocol
- Merged PR 74
PYLON RS485link status, Heartbeat and Requested Force Charge - Merged PR 75 Round
Auto CCL/Auto DCLvalues - Merged PR 77
PYLON RS485prevent stale data on BMS disconnect - Merged PR 80 BMS Modbus client: Return 0 when not online
- Merged PR 81 Fix balance trigger voltage for Basen and Deye
- New Dashboards
- YamBMS 1.5.7 :
- Adapted the default
min/maxvalues for theFloatslider - Merged PR 53 Add feature
Auto Float Voltage - New dashboard for
Auto Float Voltagefunction - Defining
state_classfor all YamBMS sensors - Set esphome
min_versionto2025.6.0 - Fixed: change
Charge StatustoBulkwhenForce Chargeis requested - Merged PR 70 Dashboards compatible with
HA 2025.7 - Merged PR 70 Dashboard
max/mincell voltage in color using macro - Removed all special characters in entities name + dashboards correction
- Adapted the default
- YamBMS 1.5.6 :
- Fixed issue 58 Compilation problem with
esphome 2025.5.0 - Fixed issue 55 New CPU frequency option
- Fixed issue 65 JBD Circular dependency error
- Fixed issue 35 BMS Charging Cycles Offset
- Merged PR 51 Support for RP2040 RPi Pico
- Merged PR 56 Add support for Basengreen BMS
- Merged PR 60 Fixes for new ESPHome and add of BMS Cycle Count offset
- Merged PR 61 Set Modbus BMS values to 0 when BMS goes offline
- New
board_ESP32-S3_Touch-LCD-4.3.yamlboard - New
board_ESP32-S3_Touch-LCD-7.yamlboard - New
board_ESP32-S3_YBoard_DJK.yamlboard - New
board_RP2040_RPi_Pico.yamlboard
- Fixed issue 58 Compilation problem with
- YamBMS 1.5.5 :
- New
main.yamlwith LP (local packages) and RP (remote packages) versions - New
board.yamlwith modular UART/CAN interfaces - The name of the JK
bms.yamlis no longer linked to a specific model - SoC calculation is now based on remaining capacity for more accuracy (BMS only) issues #39
- SoH calculation is moved to BMS level (for those who do not provide this information)
- Improvement of the Victron SmartShunt doc issues #38
- New
- YamBMS 1.5.4 :
- New low SoC corrected at each BMS level (the corrected SoC is the one transmitted to YamBMS)
- New BMS dashboard
- New end of charge logic at each BMS level, the charge switch turns off when the cells are equalized (disabled by default)
- Fixed
errors_bitamskfor JK-PB RS485, test OK with YamBMS (forked component)
- YamBMS 1.5.3 :
- Broadcasting JK-PB settings to all BMS set to OFF by default
- Reorganizing the
boardfolder and YAMLs (device_base.yaml moved to board.yaml) device_base.yamlshould no longer be part ofYamBMS_main.yaml- New
RGB LED statuslight effects (red, green, blue, cyan) as anoptionspackages forboard.yaml - Increased CPU frequency to
240Mhzas anoptionspackages forboard.yaml - Added
ESP32 Generic,LilyGo T-CAN485,LilyGo T-ConnectandXIAOboards - Fixed SoC logic (low SoC will be detected at BMS level and no longer at YamBMS level)
- Simplified combination logic (removal of the combine switch) + dashboard update
- Check
Battery Capacityis> 0before combining info (see issue #14) - Improved alarm logic with a common
YamBMS errors bitmaskfor all BMS models (see OTP vs UTP bug reported by @ChrisG) - Added PR #7547 regarding publishing entities via the API
- Removed
captive_portalbecause it increases theloop timetoo much PSRAMwill no longer be enabled by default as this has a bad impact onBLE BMS
- YamBMS 1.5.2 :
- Added shunt
Online Statusbinary_sensor - Shunt combine condition based on the new binary_sensor
Online Status - Logger
baud_rate: 0by default (frees the 3rd UART and avoids some bugs like "WK2168 with canbus" or "BLE client with RS485 modbus") - Changed names of
bmsandshuntYAMLs for modbusmulti-nodesolution - Added shared configuration file to simplify main YAML (centralization of parameters)
- Simplification (fewer options) when importing
BMS / ShuntYAMLs - New
multi-nodesolution usingRS485 modbusto communicate information to YamBMS - New board
espBerrywith2-CH-CAN HAT
- Added shunt
- YamBMS 1.5.1 :
- The conditions for
combiningBMS and thecharginganddischarginginstructions no longer have any relation with theerrors_bitmasksensor, the new system relies on the three binary_sensoronline status,charging allowedanddischarging allowedbeing linked to the status of alarms and switches. - The BMS combination procedure has been completely rewritten.
- Improved structure and ID names of
bms.yaml. - The
yambms.yamlandyambms_combine.yamlglobal variable names have been changed for better code reading. - Improved code regarding the CAN bus
esp_lightstatus for boards without integrated LED. - New
Atom S3Rboard andSmartshunt BLEshunt. - New
JBD,Seplos V1 V2,JK-B RS485(display port) andFAKEBMS. - New
YamBMS DEMOYAML and firmware offered to test and discover howYamBMSworks. - New management of temperature sensors (no longer limited to two sensors).
- @Der_Hannes fixed the AtomS3
black screenissue (with esphome > 2024.7.3) and developed new code for display management based on the ili9xxx platform. Auto CCL/DCLfunctions have been fixed to work withJK-PBandnew JK-BBMS, see this issue.- The
UVPRandOVPRsensors are no longer used and replaced byUVPandOVPto ensure operation with all BMS. - @txubelaxu fixed a bug in the
JK-PB RS485component that could cause a false battery voltage value to be sent, see this issue. - Improved documentation, added a
HowToto create its main YAML, warning about galvanic isolation.
- The conditions for
- CANBUS 2.3.7 : If there is no response from the inverter, the time before a new communication test has been reduced from
120sto60s, added Victron0x372nbr. of modulesblocking charge/discharge. - YamBMS 1.4.5 : Changed the way to configure WiFi/Ethernet network, added
ESP32-C3 ETH01-EVOethernet board, reduction of the number of YAML bms files, UARTrx_buffer_sizeis set to512by default for JK-B and JK-PB, new JK-BMS BLE sensors (last commits of @syssi) and new BLEstandardversion - CANBUS 2.3.6 : Sending CAN frames stops immediately if there are no combined BMS
- YamBMS 1.4.4 : Multi-shunt support, Simplified and new YamBMS option
battery chemistry, slidermin/maxvalues are automatically configured based on the battery chemistry and cell count, addedYamBMS Fallback Hotspot, added YamBMSUpdate service, added PVbrain2 and Atom Matrix board, added PSRAM settings YAML (not enabled by default), new MIN/MAX temperature sensor, added DC current icon, fixed dual sensorCell UVPR (MAX)bug, Improvedcombinecode, Breaking change : Atom S3GPIOs 1 and 2reversed - CANBUS 2.3.5 : New MIN/MAX temperature / sensor ID, Improved Victron protocol (online/offline battery modules, installed/available battery capacity)
- CANBUS 2.3.4 : Fixed bug of canbus link validation without inverter connected
- YamBMS 1.4.3 : Added Victron and Junctek KH-F
Shuntsupport andRequested Force Chargefunction based onSoC start/stop, newTotal Daily Energysensors - CANBUS 2.3.3 : Added
AutomaticBMS name selection andRequested Force ChargeBit 3/4/5 (PYLON 0x35C) - CANBUS 2.3.2 : Added
LuxPowerprotocol with updatedcan_id0x355, 0x356, 0x359 and 0x35C - CANBUS 2.3.1 : Improved the procedure for sending canbus frames with reduced loop time, rewritten of the canbus link validation code and added
Inverter Heartbeat Monitoringfunction - YamBMS 1.4.2 : Added new
Auto CVL Boost V.andRebulk SoCfunctions, new debug.yaml for ESP32 and ESP32-S3, improved code and comments - YamBMS 1.4.1 : Rewriting of the alarm system, bug fixes and improvement of the charging logic (new status
Cut-Off), icon allocation for each sensor, UART and CANBUS!extend ${vars}, New sensorYamBMS Delta Cell V., ImprovedBattery SOClogic - YamBMS 1.3.2 : New var
yambms_cell_count, the BMS charge or discharge switches can be activated separately without causing the decombination of the BMS, newminimalversion of the BMS YAML in order to reduce the loop time - YamBMS 1.3.1 : First multi-BMS version named
YamBMS