Files
esphome-yambms/documents/README/Supported_devices.md
T
2024-10-07 18:25:33 +02:00

9.2 KiB

YamBMS - Supported devices

Badge License: GPLv3 Badge Version GitHub stars GitHub forks GitHub watchers

Supported ESP32

Recommended: ESP32-S3 or Atom S3

Supported BMS

All JK-B and JK-PB models with software@ version >=6.0 are using the implemented protocol and should be supported.

See the @syssi esphome-jk-bms repository for more information.

Note: other BMS brands already integrated with ESPhome can be added easily.

Supported CAN bus transceiver

Note: some inverters only accept a CAN bus at 3.3V in this case please choose the SN65HVD230 chip.

TJA1050 TJA1051 SN65HVD230
Atomic CAN Base MCP2515

Supported inverter

Inverters supporting CAN PYLON/Goodwe/SMA/Victron Low Voltage protocol should work, check your inverter manual to confirm.

The following are confirmed and known to work:

Brand Model Satus Reported by Inverter bat. mode BMS BMS protocol ESP32 board CAN name CAN protocol CAN transceiver RS485 board Multi-BMS Remarks
Deye SUN-3.6K-SG03LP1-EU Working @Der_Hannes Lithium 00 JK-B UART ESP32 DevKit V1 PYLON PYLON 1.2 SN65HVD230 3.3V --- no ---
Deye SUN-5K-SG03LP1-EU Working @vdiex Lithium 00 JK-B UART ESP32 DevKit V1 PYLON PYLON 1.2 --- no ---
Deye SUN-5K-SG03LP1-EU Working @arzaman Lithium 00 JK-B BLE Atom S3 PYLON PYLON 1.2 Atomic CAN base (SKU:A103) --- no ---
Deye SUN-5K-SG03LP1-EU (3) Working @widget4145 Lithium 00 JK-PB (7) RS485 Atom S3 Lite PYLON PYLON 1.2 Atomic CAN base (SKU:A103) RS485 (talk pin) yes ---
Deye SUN-6K-SG03LP1-EU Working @Sleeper85 Lithium 00 JK-B UART ESP32 DevKit V1 PYLON PYLON 1.2 TJA1051T --- no ---
Deye SUN-12K-SG04LP3-EU Working @lucize Lithium 00 JK-B UART ESP32 DevKit V1 PYLON PYLON 1.2 --- --- no ---
Deye SUN-12K-SG04LP3-EU Working @luckylinux Lithium 00 JK-B BLE Atom S3 Lite PYLON PYLON 1.2 CANBus Unit (CA-IS3050G) --- no ---
Deye SUN-12K-SG04LP3-EU Working @virus100b Lithium 00 JK-PB (2) RS485 ESP32 DevKit V1 PYLON PYLON 1.2 TJA1050 --- yes ---
Deye SUN-12K-SG04LP3-EU Working @b1ggi Lithium 00 JK-PB (2) BLE Atom S3 Lite PYLON PYLON 1.2 Atomic CAN base (SKU:A103) --- yes Used for Inverter Offset Setting 0.5v because of Deye bug
Goodwe 3648-ES (GW5048-ES) Working @jirdol --- JK-B UART ESP32 DevKit V1 GOODWE PYLON + --- --- no ---
Goodwe GW5000S-BP Working @Uksa007 Goodwe LX U5.4-L JK-B UART ESP32 DevKit V1 GOODWE PYLON + --- --- no ---
Goodwe GW5000S-BP & GW3600S-BP Working @OselDusan7 --- JK-B UART ESP32 DevKit V1 GOODWE PYLON + --- --- no ---
Sofar ME 3000-SP Working @starman --- JK-B UART ESP32 DevKit V1 --- --- --- --- no ---
Sofar HYD 5000-ES Working @Paulfrench35 --- JK-B UART ESP32 DevKit V1 --- --- --- --- no ---
Sofar HYD 5000-EP Working @tonystrullu --- JK-B UART ESP32 DevKit V1 --- --- --- --- no ---
Sofar HYD 3600-ES Working @chaosnature Automatic JK-PB (2) BLE Atom S3 (display) PYLON PYLON 1.2 Atomic CAN base (SKU:A103) --- yes DIY Li-ion Growatt GBLI5001 converted. A 120 Ohm resistor had to be added on the Sofar side. Prefared over original BMS Manufacture's Management System.
Growatt SPF 5000ES Working @Paulfrench35 CAN L52 JK-B UART ESP32 DevKit V1 PYLON PYLON 1.2 --- --- no ---
Growatt SPF 5000ES Working @cjdell CAN L52 JK-B UART ESP32 DevKit V1 PYLON PYLON 1.2 --- no ---
Growatt SPF 5000ES Working @cinusik CAN L52 JK-PB (2) BLE Atom S3 (display) PYLON PYLON 1.2 Isolated CAN Unit (SKU:U085) Atomic RS485 Base (SKU:A131) yes Best solution for the incomplete/wrong protocols implementation on JK Inverter BMSes and some inverters.
Solis RHI-3.6K-48ES-5G Working @cjdell Pylon LV JK-B UART ESP32 DevKit V1 PYLON PYLON + SN65HVD230 3.3V --- no ---
Solis S5-EH1P4.6K-L Working @Baker0052 Pylon LV JK-B UART ESP32 DevKit V1 PYLON PYLON + SN65HVD230 3.3V --- no ---
Solis S5-EH1P6K-L Working @MrPabloUK AoBo JK-B UART ESP32 DevKit V1 SMA SMA Adafruit CAN Pal --- no ---
Solis RHI-3.6K-48ES-5G Working @MrPabloUK AoBo JK-B UART ESP32 DevKit V1 SMA SMA Adafruit CAN Pal --- no ---
Solis RHI-3K-48ES Working @chaosnature AoBo JK-B (2) BLE Atom S3 Lite SMA SMA Atomic CAN base (SKU:A103) --- yes DIY Li-ion Growatt GBLI5001 converted.
LuxPower LXP SNA 5K Working @shvmm Lithium 6 JK-B UART ESP32 DevKit V1 Automatic LuxPower SN65HVD230 / TJA1050 --- no ---
LuxPower LXP SNA 5K Working @yur43 Lithium 6 JK-PB (1) RS485 ESP32 DevKit V1 Automatic LuxPower SN65HVD230 Isolated RS485 (high speed dual) no ---
EG4 6000XP Working @ChrisG Lithium 2 JK-B (2) BLE ESP32 DevKit V1 / ESP32-S3 DevKitC-1 PYLON PYLON 1.2 MCP2515 --- yes ---
EG4 6000XP (2) Working @SGB Lithium 6 JK-B (1) JK-PB (1) BLE Atom S3 (display) Automatic LuxPower Atomic CAN base (SKU:A103) --- yes ---
Victron MultiPlus-II 48/10000/140 Working @cali-clim ESS JK-PB (2) RS485 Atom S3 (display) Automatic Victron Atomic CAN base (SKU:A103) Isolated RS485 Unit (SKU:U094) yes ---
Victron Multiplus 24/1200/25-16 Working @dmsims ESS JK-B (1) BLE Atom S3 Lite Automatic Victron Atomic CAN base (SKU:A103) --- no Plugged into Cerbo Can port (must use supplied Victron terminator in the other port)
SMA Sunny Island --- --- --- --- --- --- --- --- --- --- --- ---