Files
esphome-yambms/multi-bms_JK-ALL_BLE.yaml
T
2024-11-16 19:43:10 +01:00

181 lines
6.8 KiB
YAML
Raw Blame History

This file contains ambiguous Unicode characters
This file contains Unicode characters that might be confused with other characters. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.
# Updated : 2024.11.11
# Version : 1.5.1
# GitHub : https://github.com/Sleeper85/esphome-yambms
# YamBMS ( Yet another multi-BMS Merging Solution )
# This YAML is free software: you can redistribute it and/or
# modify it under the terms of the GNU General Public License
# as published by the Free Software Foundation, either version 3
# of the License, or (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
# See the GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program. If not, see <http://www.gnu.org/licenses/gpl.html>.
substitutions:
name: yambms
# Don't forget to configure your WiFi credentials in the secrets.yaml file
#
# If needed, configure a static IP here
# wifi:
# manual_ip:
# static_ip: 192.168.0.85
# gateway: 192.168.0.1
# subnet: 255.255.255.0
# dns1: 8.8.8.8
# dns2: 8.8.4.4
logger:
level: DEBUG # DEBUG / INFO / WARN
logs:
esp32_ble_tracker: INFO
esp32_ble_client: INFO
ota:
platform: esphome
# Please use the native `api` component instead of the `mqtt` section.
# If you use Home Assistant, the native API is more lightweight.
# If there is no HA server connected to this API, the ESP32 reboots every 15 minutes to try to resolve the problem.
# The "reboot_timeout: 0s" option will keep your ESP32 up and running even if you lose connection to your HA server.
api:
reboot_timeout: 0s
# If you don't want to use ESPHome's native API you can use MQTT instead.
# In this case don't forget to remove the 'api:' section.
# mqtt:
# broker: !secret mqtt_host
# username: !secret mqtt_username
# password: !secret mqtt_password
# id: mqtt_client
# Please note that enabling this component will take up a lot of memory and may decrease
# stability and be the cause of reboot depending on the capabilities of the board used.
#web_server:
# port: 80
# log: false
# ota: false
# +--------------------------------------+
# | Packages |
# +--------------------------------------+
# PLEASE READ : https://github.com/Sleeper85/esphome-yambms/blob/main/documents/README/YamBMS_main_YAML_HowTo.md
# Max 3 BLE connections.
# The BLE software stack (Bluedroid) on the ESP32 consumes a significant amount of RAM on the device.
# Crashes are likely to occur if you include too many additional components in your device’s configuration.
# https://esphome.io/components/ble_client.html
packages:
device_base: !include packages/base/device_base.yaml
# Board : uncomment your board
device_board: !include packages/board/board_esp32-devkit-v1.yaml
# device_board: !include packages/board/board_esp32-s3-devkitc-1.yaml
# device_board: !include packages/board/board_atom-s3-lite.yaml
# device_board: !include
# file: packages/board/board_atom-s3.yaml # board_atom-s3r.yaml
# vars:
# yambms_id: 'yambms1'
# canbus_id: 'canbus1'
# display_auto_next_page_interval: '5s'
# shunt1: !include
# file: packages/shunt/shunt_victron_smartshunt_UART.yaml # shunt_junctek_khf_UART.yaml
# vars:
# # YamBMS ID
# yambms_id: 'yambms1'
# # Shunt vars
# shunt_id: '1' # must be a number
# shunt_name: 'Shunt 1'
# shunt_update_interval: '3s'
# shunt_combine_interval: '1s'
# shunt_uart_id: uart_esp_0
bms1: !include
file: packages/bms/bms_JK-ALL_BLE_standard.yaml
vars:
# YamBMS ID
yambms_id: 'yambms1'
# BMS vars
bms_id: '1' # must be a number
bms_name: 'JK-BMS 1'
bms_update_interval: '3s'
bms_combine_interval: '1s'
bms_ble_protocol_version: JK02_32S # JK02_24S < hardware version 11.0 >= JK02_32S
bms_ble_mac_address: C8:47:8C:10:7E:AA
bms2: !include
file: packages/bms/bms_JK-ALL_BLE_standard.yaml
vars:
# YamBMS ID
yambms_id: 'yambms1'
# BMS vars
bms_id: '2' # must be a number
bms_name: 'JK-BMS 2'
bms_update_interval: '3s'
bms_combine_interval: '1s'
bms_ble_protocol_version: JK02_32S # JK02_24S < hardware version 11.0 >= JK02_32S
bms_ble_mac_address: C8:47:8C:EE:16:EA
yambms1: !include
file: packages/yambms/yambms.yaml
vars:
# Please read the cut-off charging logic README to understand how the YamBMS works
yambms_id: 'yambms1'
yambms_name: 'YamBMS 1'
yambms_update_interval: '1s'
# Input numbers can be displayed as a slider or an input box, options are 'slider' or 'box'.
yambms_input_number_mode: 'slider'
# Please check and fill in the options below correctly according to your battery chemistry and number of cells in series.
# These parameters are important and used for charging logic.
# Battery Chemistry
yambms_battery_chemistry: '1' # 1-LFP | 2-Li-ion | 3-LTO
# Number of cells in series
yambms_cell_count: '16'
# Bulk / Absorption Voltage : corresponds to the Bulk voltage that will be used to charge the battery. (LFP : 55.2V = 3.45V/Cell for 16S battery)
yambms_bulk_v: '55.2'
# Float Voltage : corresponds to the voltage at which the battery would be maintained at the end of charge. (LFP : 53.6V = 3.35V/Cell for 16S battery)
yambms_float_v: '53.6'
# Rebulk voltage, voltage from which a new Bulk charge can start. (LFP : 52.8V = 3.3V/Cell for 16S battery)
yambms_rebulk_v: '52.8'
# Maximum time in minutes that the cut-off step can last before charging is complete
# If your cells are properly balanced this step ends at the fastest after the `cut-off timer`
# This timer can be deactivated with a switch
yambms_eoc_timer: '30'
# Time in seconds during which the end of charge conditions must be respected (cut-off + cells not equalizing)
yambms_cutoff_timer: '60'
# Maximum charging cycles is used to calculate the battey SOH, LF280K v3 =8000.0, LF280K v2 =6000.0, LF280=3000.0 (decimal is required)
yambms_max_cycles: '6000.0'
canbus1: !include
file: packages/yambms/yambms_canbus.yaml
vars:
# YamBMS ID
yambms_id: 'yambms1' # YamBMS ID to retrieve information from
# CANBUS vars
canbus_id: 'canbus1'
canbus_name: 'CANBUS 1'
canbus_node_id: 'canbus_node1'
canbus_light_id: 'esp_light'
# The CANBUS link will be considered down if no response from the inverter (ID 0x305) for 5s
# The Deye inverter sends the ACK (can_id 0x305) only when it receives the can_id 0x356
canbus_link_timer: '5s'
# +--------------------------------------+
# | DEBUG ( logger level must be DEBUG ) |
# +--------------------------------------+
device_debug: !include
file: packages/base/device_debug_ESP32.yaml
vars:
debug_name: 'Debug'
debug_update_interval: '5s'