Files
esphome-yambms/YamBMS_RP_HA_Display.yaml
T

205 lines
8.6 KiB
YAML

# Updated : 2026.06.29
# Version : 1.7.0
# GitHub : https://github.com/Sleeper85/esphome-yambms
# YamBMS ( Yet another multi-BMS Merging Solution )
# This YAML is free software: you can redistribute it and/or
# modify it under the terms of the GNU General Public License
# as published by the Free Software Foundation, either version 3
# of the License, or (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
# See the GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program. If not, see <http://www.gnu.org/licenses/gpl.html>.
######################## YamBMS Remote Packages Version ########################
# You can compile this YAML directly without the `packages` folder.
# The packages will be automatically downloaded from GitHub.
# Don't forget to configure your WiFi credentials in the secrets.yaml
################################################################################
# If needed, configure a static IP here
# wifi:
# manual_ip:
# static_ip: 192.168.0.85
# gateway: 192.168.0.1
# subnet: 255.255.255.0
# dns1: 8.8.8.8
# dns2: 8.8.4.4
logger:
level: INFO # VERBOSE / DEBUG / INFO / WARN
# baud_rate: 115200 # Send logs to the `hardware_uart` USB output (this consumes a UART interface)
# hardware_uart: UART0 # UART0 / USB_SERIAL_JTAG
ota:
- platform: esphome
api: # This YAML only works with the API
# +--------------------------------------+
# | Global Settings |
# +--------------------------------------+
substitutions:
# This project uses the `sub-device` function of ESPHome to prefix entity names.
# This allows to group entities into logical devices that appear separately in Home Assistant.
hostname: 'yambms-display' # Name of your ESPHome node registered on the IP network (DNS name must be unique)
friendly_name : 'YamBMS Display' # Name of your board (prefix for board entities)
# +--------------------------------------+
# | Packages |
# +--------------------------------------+
# PLEASE READ : https://github.com/Sleeper85/esphome-yambms/blob/main/documents/README/YamBMS_RP_YAML.md
packages:
remote_packages:
url: https://github.com/Sleeper85/esphome-yambms
ref: dev
refresh: 0s
files:
# +------------------------------------------------------------------------------+
# | >>> UNCOMMENT YOUR BOARD
# | >>> ONLY ONE BOARD !
# +------------------------------------------------------------------------------+
# - path: 'packages/board/board_ESP32-S3_WS-Touch-LCD-4.3.yaml' # 800x480
- path: 'packages/board/board_ESP32-S3_WS-Touch-LCD-7.yaml' # 800x480
# - path: 'packages/board/board_ESP32-P4_M5Stack-Tab5.yaml' # 1280x720
# +------------------------------------------------------------------------------+
# | >>> Board Display
# | >>> Uncomment the display that corresponds to your board
# +------------------------------------------------------------------------------+
- path: 'packages/board/board_options_display_lvgl_package_800x480_blue_navy_ha_yambms.yaml' # 800x480 Blue Navy display - YamBMS pages
# - path: 'packages/board/board_options_display_lvgl_package_800x480_blue_navy_ha_full.yaml' # 800x480 Blue Navy display - Overview + YamBMS pages
# - path: 'packages/board/board_options_display_lvgl_package_1280x720_Tab5_ha.yaml' # 1280x720 Tab5 display
vars:
# Variables required for all display YAMLs
device_name: 'yambms' # The friendly_name of your YamBMS node is in lowercase; spaces are replaced by underscores
yambms_name: 'yambms_1' # The yambms_name of your YamBMS node is in lowercase; spaces are replaced by underscores
# +------------------------------------------------------------------------------+
# | >>> Uncomment the variables below to use the following YAMLs :
# | >>> board_options_display_lvgl_package_800x480_blue_navy_ha_full.yaml
# +------------------------------------------------------------------------------+
# Overview page inputs
# pv_power: your_pv_power
# pv_energy_today: your_pv_energy_today
# grid_power: your_grid_power # positive = import, negative = export
# grid_voltage: your_grid_voltage
# grid_frequency: your_grid_frequency
# grid_import_today: your_grid_import_today
# grid_export_today: your_grid_export_today
# bat_power: yambms_1_power # positive = charge, negative = discharge
# bat_soc: yambms_1_battery_soc
# bat_voltage: yambms_1_total_voltage
# bat_cell_count: yambms_1_cell_count
# bat_charging_phase: yambms_1_charging_status
# bat_charge_today: yambms_1_daily_charging_energy
# bat_discharge_today: yambms_1_daily_discharging_energy
# home_power: your_home_power
# home_daily_energy_total: your_home_daily_energy_total
# home_daily_energy_solar: your_home_daily_energy_solar
# home_daily_energy_grid: your_home_daily_energy_grid
# home_daily_energy_battery: yambms_1_daily_discharging_energy
# Overview page animation
# Max power = dot max speed
# anim_pv_power_max: 8000
# anim_grid_power_max: 6000
# anim_battery_power_max: 6000
# anim_home_power_max: 6000
# anim_duration_min: 800 # ms at max power
# anim_duration_max: 4000 # ms at nul power
# +------------------------------------------------------------------------------+
# | >>> Board Options
# | >>> Uncomment your interfaces and options
# +------------------------------------------------------------------------------+
# UART 1 (uart_id: uart_esp_1)
# - path: 'packages/board/board_options_itf_uart_esp_1.yaml'
# UART 2 (uart_id: uart_esp_2)
# - path: 'packages/board/board_options_itf_uart_esp_2.yaml'
# UART 3 (uart_id: uart_esp_3)
# - path: 'packages/board/board_options_itf_uart_esp_3.yaml'
# UART flow control
# - path: 'packages/board/board_options_itf_uart_flow_control.yaml'
# vars:
# uart_id: 'uart_esp_1'
# uart_flow_control_pin: ${talk_pin}
# CAN transceiver - ESP32_CAN (TJA105x, SN65HVD230, M5Stack CAN base/unit)
# - path: 'packages/board/board_options_itf_canbus_esp32_can.yaml'
# vars:
# # to bms = canbus_bms_1
# # to inverter = canbus_inverter_1
# canbus_node_id: 'canbus_inverter_1'
# CAN transceiver - MCP2515
# - path: 'packages/board/board_options_itf_canbus_mcp2515.yaml'
# vars:
# # to bms = canbus_bms_1
# # to inverter = canbus_inverter_1
# canbus_node_id: 'canbus_inverter_1'
# PSRAM octal 80Mhz
# - path: 'packages/board/board_options_PSRAM_octal_80Mhz.yaml'
# Web Server
# - path: 'packages/yambms/yambms_web_server.yaml'
# WiFi AP @ 192.168.4.1
# - path: 'packages/board/board_options_wifi_ap.yaml'
# Captive Portal @ 192.168.4.1
# - path: 'packages/board/board_options_captive_portal.yaml'
# +------------------------------------------------------------------------------+
# | >>> DEBUG ( logger level must be DEBUG )
# +------------------------------------------------------------------------------+
# - path: packages/base/device_debug_ESP32.yaml
- path: packages/base/device_debug_ESP32_PSRAM.yaml
vars:
debug_name: 'Debug'
debug_update_interval: '5s'
# Size of your PSRAM in bits
# 8Mb='8388608' | 6Mb='6291456' | 4Mb='4194304' | 2Mb='2097152' | NoPSRAM='0'
debug_psram_size: '8388608'
# +------------------------------------------------------------------------------+
# | >>> Add your custom packages below
# +------------------------------------------------------------------------------+
# Custom packages
# yambms_custom: !include yambms_custom.yaml
# +------------------------------------------------------------------------------+
# | >>> Add your custom YAML below
# +----- -------------------------------------------------------------------------+
# Custom YAML