YamBMS Local Packages 1.5.5

This commit is contained in:
Sleeper85 committed 2025-04-04 01:15:18 +02:00
1 parent de8927ce36
commit 06ed27e8f0
12 files changed
+1544

No files matched your search

+63
View File
@@ -0,0 +1,63 @@
# Updated : 2025.04.01
# Version : 1.5.5
# GitHub : https://github.com/Sleeper85/esphome-yambms
# YamBMS ( Yet another multi-BMS Merging Solution )
# This YAML is free software: you can redistribute it and/or
# modify it under the terms of the GNU General Public License
# as published by the Free Software Foundation, either version 3
# of the License, or (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
# See the GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program. If not, see <http://www.gnu.org/licenses/gpl.html>.
############################ Local Packages Example ############################
# This is not a working YAML but just code ready to copy into your main YAML.
################################################################################
packages:
bms1: !include
file: packages/bms/bms_combine_JBD_UART_full.yaml
vars:
bms_id: '1' # must be a number
bms_name: 'BMS 1'
bms_uart_id: 'uart_esp_1'
bms_rx_timeout: '150ms'
# Required settings cannot be retrieved from BMS
# These values ​​must match your BMS settings
# LFP values example
bms_max_charge_current: '100' # A. Used to calculate maximum charge current
bms_max_discharge_current: '100' # A. Used to calculate maximum discharge current
bms_cell_ovp: '3.650' # V. Used by 'Auto CCL' functions
bms_cell_uvp: '2.800' # V. Used by 'Auto DCL' functions and to calculate maximum discharge voltage
bms_balance_trigger_voltage: '0.010' # V. Used by 'Auto CVL' functions
# Maximum cell charging cycles is used to calculate the battey SoH.
# MB31=8000.0, LF280K v3=8000.0, LF280K v2=6000.0, LF280=3000.0 (decimal is required)
bms_cell_max_cycles: '6000.0'
bms2: !include
file: packages/bms/bms_combine_JBD_BLE_full.yaml
vars:
bms_id: '2' # must be a number
bms_name: 'BMS 2'
bms_ble_mac_address: 'C8:47:8C:10:7E:AA' # Your MAC address
# Required settings cannot be retrieved from BMS
# These values ​​must match your BMS settings
# LFP values example
bms_max_charge_current: '100' # A. Used to calculate maximum charge current
bms_max_discharge_current: '100' # A. Used to calculate maximum discharge current
bms_cell_ovp: '3.650' # V. Used by 'Auto CCL' functions
bms_cell_uvp: '2.800' # V. Used by 'Auto DCL' functions and to calculate maximum discharge voltage
bms_balance_trigger_voltage: '0.010' # V. Used by 'Auto CVL' functions
# Maximum cell charging cycles is used to calculate the battey SoH.
# MB31=8000.0, LF280K v3=8000.0, LF280K v2=6000.0, LF280=3000.0 (decimal is required)
bms_cell_max_cycles: '6000.0'
+48
View File
@@ -0,0 +1,48 @@
# Updated : 2025.04.01
# Version : 1.5.5
# GitHub : https://github.com/Sleeper85/esphome-yambms
# YamBMS ( Yet another multi-BMS Merging Solution )
# This YAML is free software: you can redistribute it and/or
# modify it under the terms of the GNU General Public License
# as published by the Free Software Foundation, either version 3
# of the License, or (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
# See the GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program. If not, see <http://www.gnu.org/licenses/gpl.html>.
############################ Local Packages Example ############################
# This is not a working YAML but just code ready to copy into your main YAML.
################################################################################
packages:
bms1: !include
file: packages/bms/bms_combine_JK_BLE_standard.yaml
vars:
bms_id: '1' # must be a number
bms_name: 'JK-BMS 1'
bms_ble_protocol_version: 'JK02_32S' # JK02_24S < hardware version 11.0 >= JK02_32S
bms_ble_mac_address: 'C8:47:8C:10:7E:AA'
# Maximum cell charging cycles is used to calculate the battey SoH.
# MB31=8000.0, LF280K v3=8000.0, LF280K v2=6000.0, LF280=3000.0 (decimal is required)
bms_cell_max_cycles: '6000.0'
bms2: !include
file: packages/bms/bms_combine_JK_BLE_standard.yaml
vars:
bms_id: '2' # must be a number
bms_name: 'JK-BMS 2'
bms_ble_protocol_version: 'JK02_32S' # JK02_24S < hardware version 11.0 >= JK02_32S
bms_ble_mac_address: 'C8:47:8C:EE:16:EA'
# Maximum cell charging cycles is used to calculate the battey SoH.
# MB31=8000.0, LF280K v3=8000.0, LF280K v2=6000.0, LF280=3000.0 (decimal is required)
bms_cell_max_cycles: '6000.0'
+125
View File
@@ -0,0 +1,125 @@
# Updated : 2025.04.01
# Version : 1.5.5
# GitHub : https://github.com/Sleeper85/esphome-yambms
# YamBMS ( Yet another multi-BMS Merging Solution )
# This YAML is free software: you can redistribute it and/or
# modify it under the terms of the GNU General Public License
# as published by the Free Software Foundation, either version 3
# of the License, or (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
# See the GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program. If not, see <http://www.gnu.org/licenses/gpl.html>.
############################ Local Packages Example ############################
# This is not a working YAML but just code ready to copy into your main YAML.
################################################################################
packages:
# The sniffer represents the ESP node connected to the JK-BMS PB RS485 bus
# If address 0x00 is not detected on the RS485 bus, the sniffer will act directly as a master BMS (mode 2, max 15 BMS)
# sniffer1: !include
# file: packages/bms/bms_combine_JK_RS485_Modbus_sniffer_talk_pin.yaml
# vars:
# sniffer_id: 'sniffer1'
# sniffer_protocol: 'JK02_32S'
# sniffer_uart_id: 'uart_esp_1'
# sniffer_talk_pin: 8 # ESP32: 4, ESP32-S3: 8, ESP32-C3: 10
sniffer1: !include
file: packages/bms/bms_combine_JK_RS485_Modbus_sniffer.yaml
vars:
sniffer_id: 'sniffer1'
sniffer_protocol: 'JK02_32S'
sniffer_uart_id: 'uart_esp_1'
# Mode2 : configure the DIP switches of your BMS from 0x01 to 0x0F (don't use the 0x00 address, maximum 15 BMS)
bms1: !include
file: packages/bms/bms_combine_JK_RS485_Modbus_bms_standard.yaml
vars:
# Sniffer ID
sniffer_id: 'sniffer1'
# BMS vars
bms_id: '1' # must be a number
bms_name: 'JK-BMS 1'
bms_address: '0x01' # BMS 1 DIP switch
bms2: !include
file: packages/bms/bms_combine_JK_RS485_Modbus_bms_standard.yaml
vars:
# Sniffer ID
sniffer_id: 'sniffer1'
# BMS vars
bms_id: '2' # must be a number
bms_name: 'JK-BMS 2'
bms_address: '0x02' # BMS 2 DIP switch
bms3: !include
file: packages/bms/bms_combine_JK_RS485_Modbus_bms_standard.yaml
vars:
# Sniffer ID
sniffer_id: 'sniffer1'
# BMS vars
bms_id: '3' # must be a number
bms_name: 'JK-BMS 3'
bms_address: '0x03' # BMS 3 DIP switch
bms4: !include
file: packages/bms/bms_combine_JK_RS485_Modbus_bms_standard.yaml
vars:
# Sniffer ID
sniffer_id: 'sniffer1'
# BMS vars
bms_id: '4' # must be a number
bms_name: 'JK-BMS 4'
bms_address: '0x04' # BMS 4 DIP switch
bms5: !include
file: packages/bms/bms_combine_JK_RS485_Modbus_bms_standard.yaml
vars:
# Sniffer ID
sniffer_id: 'sniffer1'
# BMS vars
bms_id: '5' # must be a number
bms_name: 'JK-BMS 5'
bms_address: '0x05' # BMS 5 DIP switch
bms6: !include
file: packages/bms/bms_combine_JK_RS485_Modbus_bms_standard.yaml
vars:
# Sniffer ID
sniffer_id: 'sniffer1'
# BMS vars
bms_id: '6' # must be a number
bms_name: 'JK-BMS 6'
bms_address: '0x06' # BMS 6 DIP switch
bms7: !include
file: packages/bms/bms_combine_JK_RS485_Modbus_bms_standard.yaml
vars:
# Sniffer ID
sniffer_id: 'sniffer1'
# BMS vars
bms_id: '7' # must be a number
bms_name: 'JK-BMS 7'
bms_address: '0x07' # BMS 7 DIP switch
bms8: !include
file: packages/bms/bms_combine_JK_RS485_Modbus_bms_standard.yaml
vars:
# Sniffer ID
sniffer_id: 'sniffer1'
# BMS vars
bms_id: '8' # must be a number
bms_name: 'JK-BMS 8'
bms_address: '0x08' # BMS 8 DIP switch
+46
View File
@@ -0,0 +1,46 @@
# Updated : 2025.04.01
# Version : 1.5.5
# GitHub : https://github.com/Sleeper85/esphome-yambms
# YamBMS ( Yet another multi-BMS Merging Solution )
# This YAML is free software: you can redistribute it and/or
# modify it under the terms of the GNU General Public License
# as published by the Free Software Foundation, either version 3
# of the License, or (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
# See the GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program. If not, see <http://www.gnu.org/licenses/gpl.html>.
############################ Local Packages Example ############################
# This is not a working YAML but just code ready to copy into your main YAML.
################################################################################
packages:
bms1: !include
file: packages/bms/bms_combine_JK_UART_4G-GPS_full.yaml
vars:
bms_id: '1' # must be a number
bms_name: 'JK-BMS 1'
bms_uart_id: 'uart_esp_1'
# Maximum cell charging cycles is used to calculate the battey SoH.
# MB31=8000.0, LF280K v3=8000.0, LF280K v2=6000.0, LF280=3000.0 (decimal is required)
bms_cell_max_cycles: '6000.0'
bms2: !include
file: packages/bms/bms_combine_JK_UART_4G-GPS_full.yaml
vars:
bms_id: '2' # must be a number
bms_name: 'JK-BMS 2'
bms_uart_id: 'uart_esp_2'
# Maximum cell charging cycles is used to calculate the battey SoH.
# MB31=8000.0, LF280K v3=8000.0, LF280K v2=6000.0, LF280=3000.0 (decimal is required)
bms_cell_max_cycles: '6000.0'
+73
View File
@@ -0,0 +1,73 @@
# Updated : 2025.04.01
# Version : 1.5.5
# GitHub : https://github.com/Sleeper85/esphome-yambms
# YamBMS ( Yet another multi-BMS Merging Solution )
# This YAML is free software: you can redistribute it and/or
# modify it under the terms of the GNU General Public License
# as published by the Free Software Foundation, either version 3
# of the License, or (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
# See the GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program. If not, see <http://www.gnu.org/licenses/gpl.html>.
############################ Local Packages Example ############################
# This is not a working YAML but just code ready to copy into your main YAML.
################################################################################
packages:
seplos_modbus1: !include
file: packages/bms/bms_combine_SEPLOS_V1_V2_RS485_modbus.yaml
vars:
seplos_modbus_id: 'seplos_modbus1'
seplos_modbus_uart_id: 'uart_esp_1'
seplos_modbus_baud_rate: '9600' # 9600 / 19200 ; please set the baudrate of your Seplos BMS model here
seplos_modbus_rx_timeout: '150ms'
bms1: !include
file: packages/bms/bms_combine_SEPLOS_V1_V2_RS485_bms_full.yaml
vars:
# Seplos modbus ID
seplos_modbus_id: 'seplos_modbus1'
# BMS vars
bms_id: '1' # must be a number
bms_name: 'BMS 1'
bms_address: '0x01' # BMS 1 DIP switch
bms_protocol_version: '0x20' # Known protocol versions: 0x20 (Seplos), 0x26 (Boqiang)
# Required settings cannot be retrieved from BMS
# These values ​​must match your BMS settings
# LFP values example
bms_max_charge_current: '100' # A. Used to calculate maximum charge current
bms_max_discharge_current: '100' # A. Used to calculate maximum discharge current
bms_cell_ovp: '3.650' # V. Used by 'Auto CCL' functions
bms_cell_uvp: '2.800' # V. Used by 'Auto DCL' functions and to calculate maximum discharge voltage
bms_balance_trigger_voltage: '0.010' # V. Used by 'Auto CVL' functions
bms2: !include
file: packages/bms/bms_combine_SEPLOS_V1_V2_RS485_bms_full.yaml
vars:
# Seplos modbus ID
seplos_modbus_id: 'seplos_modbus1'
# BMS vars
bms_id: '2' # must be a number
bms_name: 'BMS 2'
bms_address: '0x02' # BMS 2 DIP switch
bms_protocol_version: '0x20' # Known protocol versions: 0x20 (Seplos), 0x26 (Boqiang)
bms_uart_id: uart_esp_2
# Required settings cannot be retrieved from BMS
# These values ​​must match your BMS settings
# LFP values example
bms_max_charge_current: '100' # A. Used to calculate maximum charge current
bms_max_discharge_current: '100' # A. Used to calculate maximum discharge current
bms_cell_ovp: '3.650' # V. Used by 'Auto CCL' functions
bms_cell_uvp: '2.800' # V. Used by 'Auto DCL' functions and to calculate maximum discharge voltage
bms_balance_trigger_voltage: '0.010' # V. Used by 'Auto CVL' functions
@@ -0,0 +1,104 @@
# Updated : 2025.04.01
# Version : 1.5.5
# GitHub : https://github.com/Sleeper85/esphome-yambms
# YamBMS ( Yet another multi-BMS Merging Solution )
# This YAML is free software: you can redistribute it and/or
# modify it under the terms of the GNU General Public License
# as published by the Free Software Foundation, either version 3
# of the License, or (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
# See the GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program. If not, see <http://www.gnu.org/licenses/gpl.html>.
############################ Local Packages Example ############################
# This is not a working YAML but just code ready to copy into your main YAML.
################################################################################
substitutions:
modbus_update_interval: '5s' # frequency with which BMS/Shunt modbus servers are queried
modbus_baud_rate: '19200' # 9600 / 19200 / 11520
modbus_command_throttle: '0ms' # minimum time in between 2 requests to the device
modbus_send_wait_time: '250ms' # time in milliseconds before the next ModBUS command is sent if an answer from a previous command is pending
packages:
modbus: !include
file: packages/base/device_modbus.yaml
vars:
modbus_role: 'client' # client / server
modbus_uart_id: 'uart_esp_1' # RS485 board
shunt1: !include
file: packages/shunt/shunt_combine_modbus_client.yaml
vars:
shunt_id: '1' # must be a number
shunt_name: 'Shunt 1'
bms1: !include
file: packages/bms/bms_combine_modbus_client.yaml
vars:
bms_id: '1' # must be a number
bms_name: 'BMS 1'
bms2: !include
file: packages/bms/bms_combine_modbus_client.yaml
vars:
bms_id: '2' # must be a number
bms_name: 'BMS 2'
bms3: !include
file: packages/bms/bms_combine_modbus_client.yaml
vars:
bms_id: '3' # must be a number
bms_name: 'BMS 3'
# bms4: !include
# file: packages/bms/bms_combine_modbus_client.yaml
# vars:
# bms_id: '4' # must be a number
# bms_name: 'BMS 4'
# bms5: !include
# file: packages/bms/bms_combine_modbus_client.yaml
# vars:
# bms_id: '5' # must be a number
# bms_name: 'BMS 5'
# bms6: !include
# file: packages/bms/bms_combine_modbus_client.yaml
# vars:
# bms_id: '6' # must be a number
# bms_name: 'BMS 6'
# bms7: !include
# file: packages/bms/bms_combine_modbus_client.yaml
# vars:
# bms_id: '7' # must be a number
# bms_name: 'BMS 7'
# bms8: !include
# file: packages/bms/bms_combine_modbus_client.yaml
# vars:
# bms_id: '8' # must be a number
# bms_name: 'BMS 8'
# bms9: !include
# file: packages/bms/bms_combine_modbus_client.yaml
# vars:
# bms_id: '9' # must be a number
# bms_name: 'BMS 9'
# bms10: !include
# file: packages/bms/bms_combine_modbus_client.yaml
# vars:
# bms_id: '10' # must be a number
# bms_name: 'BMS 10'
@@ -0,0 +1,55 @@
# Updated : 2025.04.01
# Version : 1.5.5
# GitHub : https://github.com/Sleeper85/esphome-yambms
# YamBMS ( Yet another multi-BMS Merging Solution )
# This YAML is free software: you can redistribute it and/or
# modify it under the terms of the GNU General Public License
# as published by the Free Software Foundation, either version 3
# of the License, or (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
# See the GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program. If not, see <http://www.gnu.org/licenses/gpl.html>.
############################ Local Packages Example ############################
# This is not a working YAML but just code ready to copy into your main YAML.
################################################################################
substitutions:
modbus_update_interval: '5s' # frequency with which BMS/Shunt modbus servers are queried
modbus_baud_rate: '19200' # 9600 / 19200 / 11520
modbus_command_throttle: '0ms' # minimum time in between 2 requests to the device
modbus_send_wait_time: '250ms' # time in milliseconds before the next ModBUS command is sent if an answer from a previous command is pending
packages:
modbus: !include
file: packages/base/device_modbus.yaml
vars:
modbus_role: 'server' # client / server
modbus_uart_id: 'uart_esp_1' # RS485 board
shunt1: !include
file: packages/shunt/shunt_modbus_Victron_SmartShunt_UART.yaml
vars:
shunt_id: '1' # must be a number
shunt_name: 'Shunt 1'
shunt_uart_id: 'uart_esp_2'
bms1: !include
file: packages/bms/bms_modbus_JK_UART_4G-GPS_full.yaml
vars:
bms_id: '1' # must be a number
bms_name: 'JK-BMS 1'
bms_uart_id: 'uart_esp_3'
# Maximum cell charging cycles is used to calculate the battey SoH.
# MB31=8000.0, LF280K v3=8000.0, LF280K v2=6000.0, LF280=3000.0 (decimal is required)
bms_cell_max_cycles: '6000.0'
@@ -0,0 +1,60 @@
# Updated : 2025.04.01
# Version : 1.5.5
# GitHub : https://github.com/Sleeper85/esphome-yambms
# YamBMS ( Yet another multi-BMS Merging Solution )
# This YAML is free software: you can redistribute it and/or
# modify it under the terms of the GNU General Public License
# as published by the Free Software Foundation, either version 3
# of the License, or (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
# See the GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program. If not, see <http://www.gnu.org/licenses/gpl.html>.
############################ Local Packages Example ############################
# This is not a working YAML but just code ready to copy into your main YAML.
################################################################################
substitutions:
modbus_update_interval: '5s' # frequency with which BMS/Shunt modbus servers are queried
modbus_baud_rate: '19200' # 9600 / 19200 / 11520
modbus_command_throttle: '0ms' # minimum time in between 2 requests to the device
modbus_send_wait_time: '250ms' # time in milliseconds before the next ModBUS command is sent if an answer from a previous command is pending
packages:
modbus: !include
file: packages/base/device_modbus.yaml
vars:
modbus_role: 'server' # client / server
modbus_uart_id: 'uart_esp_1' # RS485 board
bms2: !include
file: packages/bms/bms_modbus_JK_BLE_standard.yaml
vars:
bms_id: '2' # must be a number, also represents the modbus server number !
bms_name: 'JK-BMS 2'
bms_ble_protocol_version: JK02_32S # JK02_24S < hardware version 11.0 >= JK02_32S
bms_ble_mac_address: C8:47:8C:10:7E:AA
# Maximum cell charging cycles is used to calculate the battey SoH.
# MB31=8000.0, LF280K v3=8000.0, LF280K v2=6000.0, LF280=3000.0 (decimal is required)
bms_cell_max_cycles: '6000.0'
bms3: !include
file: packages/bms/bms_modbus_JK_BLE_standard.yaml
vars:
bms_id: '3' # must be a number, also represents the modbus server number !
bms_name: 'JK-BMS 3'
bms_ble_protocol_version: JK02_32S # JK02_24S < hardware version 11.0 >= JK02_32S
bms_ble_mac_address: C8:47:8C:EE:16:EA
# Maximum cell charging cycles is used to calculate the battey SoH.
# MB31=8000.0, LF280K v3=8000.0, LF280K v2=6000.0, LF280=3000.0 (decimal is required)
bms_cell_max_cycles: '6000.0'
+279
View File
@@ -0,0 +1,279 @@
# Updated : 2025.04.01
# Version : 1.5.5
# GitHub : https://github.com/Sleeper85/esphome-yambms
# YamBMS ( Yet another multi-BMS Merging Solution )
# This YAML is free software: you can redistribute it and/or
# modify it under the terms of the GNU General Public License
# as published by the Free Software Foundation, either version 3
# of the License, or (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
# See the GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program. If not, see <http://www.gnu.org/licenses/gpl.html>.
######################## YamBMS Local Packages Version #########################
# You need to copy the `packages` folder into the same folder as this YAML in order to compile it.
# Don't forget to configure your WiFi credentials in the secrets.yaml
################################################################################
# Don't forget to configure your WiFi credentials in the secrets.yaml
#
# If needed, configure a static IP here
# wifi:
# manual_ip:
# static_ip: 192.168.0.85
# gateway: 192.168.0.1
# subnet: 255.255.255.0
# dns1: 8.8.8.8
# dns2: 8.8.4.4
logger:
level: INFO # VERBOSE / DEBUG / INFO / WARN
ota:
platform: esphome
# Please use the native `api` component instead of the `mqtt` section.
# If you use Home Assistant, the native API is more lightweight.
# If there is no HA server connected to this API, the ESP32 reboots every 15 minutes to try to resolve the problem.
# The "reboot_timeout: 0s" option will keep your ESP32 up and running even if you lose connection to your HA server.
api:
reboot_timeout: 0s
# If you don't want to use ESPHome's native API you can use MQTT instead.
# In this case don't forget to remove the 'api:' section.
# mqtt:
# broker: !secret mqtt_host
# username: !secret mqtt_username
# password: !secret mqtt_password
# id: mqtt_client
# Please note that enabling this component will take up a lot of memory and may decrease
# stability and be the cause of reboot depending on the capabilities of the board used.
# web_server:
# port: 80
# log: false
# ota: false
# +--------------------------------------+
# | Global Settings |
# +--------------------------------------+
substitutions:
# ESP32 name / hostname
name: yambms-demo
# +--------------------------------------+
# | YamBMS Settings |
# +--------------------------------------+
# Please read the cut-off charging logic README to understand how the YamBMS works
yambms_id: 'yambms1'
yambms_name: 'YamBMS 1'
yambms_update_interval: '1s'
# Input numbers can be displayed as a slider or an input box, options are 'slider' or 'box'.
yambms_input_number_mode: 'slider'
# Please check and fill in the options below correctly according to your battery chemistry and number of cells in series.
# These parameters are important and used for charging logic.
# Battery Chemistry
yambms_battery_chemistry: '1' # 1-LFP | 2-Li-ion | 3-LTO
# Number of cells in series
yambms_cell_count: '16'
# Bulk / Absorption Voltage : corresponds to the Bulk voltage that will be used to charge the battery. (LFP : 55.2V = 3.45V/Cell for 16S battery)
yambms_bulk_v: '55.2'
# Float Voltage : corresponds to the voltage at which the battery would be maintained at the end of charge. (LFP : 53.6V = 3.35V/Cell for 16S battery)
yambms_float_v: '53.6'
# Rebulk voltage, voltage from which a new Bulk charge can start. (LFP : 52.8V = 3.3V/Cell for 16S battery)
yambms_rebulk_v: '52.8'
# Maximum time in minutes that the cut-off step can last before charging is complete
# If your cells are properly balanced this step ends at the fastest after the `cut-off timer`
# This timer can be deactivated with a switch
yambms_eoc_timer: '30'
# Time in seconds during which the end of charge conditions must be respected (cut-off + cells not equalizing)
yambms_cutoff_timer: '60'
# +--------------------------------------+
# | Shunt Settings |
# +--------------------------------------+
shunt_update_interval: '3s' # frequency at which Shunt data is refreshed
shunt_combine_interval: '1s' # frequency at which Shunt data is combined in YamBMS
# +--------------------------------------+
# | BMS Settings |
# +--------------------------------------+
bms_update_interval: '3s' # frequency at which BMS data is refreshed, going below '3s' can cause problems
bms_combine_interval: '1s' # frequency at which BMS data is combined in YamBMS
bms_cutoff_timer: '50s' # time during which the end of charge conditions must be respected (cut-off + cells not equalizing)
# +--------------------------------------+
# | Packages |
# +--------------------------------------+
# PLEASE READ : https://github.com/Sleeper85/esphome-yambms/blob/main/documents/README/YamBMS_main_YAML_HowTo.md
packages:
############### >>> UNCOMMENT YOUR BOARD <<< ###############
############### >>> ONLY ONE BOARD ! <<< ###############
# This list is incomplete, other board.yaml are available in the board folder
device_board: !include packages/board/board_ESP32_Generic.yaml
# device_board: !include packages/board/board_ESP32_DevKit-V1.yaml
# device_board: !include packages/board/board_ESP32_LilyGo-T-CAN485.yaml
# device_board: !include packages/board/board_ESP32_EVB.yaml
# device_board: !include packages/board/board_ESP32_Atom-Lite.yaml
# device_board: !include packages/board/board_ESP32-C3_ETH01-EVO.yaml
# device_board: !include packages/board/board_ESP32-S3_DevKitC-1.yaml
# device_board: !include packages/board/board_ESP32-S3_LilyGo-T-Connect.yaml
# device_board: !include packages/board/board_ESP32-S3_AtomS3-Lite.yaml
# device_board: !include
# file: packages/board/board_ESP32-S3_AtomS3.yaml # board_ESP32-S3_AtomS3R.yaml
# vars:
# display_auto_next_page_interval: '5s'
########### >>> UNCOMMENT YOUR BOARD OPTIONS <<< ###########
captive_portal: !include packages/board/board_options_captive_portal.yaml
# uart_esp_1: !include packages/board/board_options_itf_uart_esp_1.yaml
# uart_esp_2: !include packages/board/board_options_itf_uart_esp_2.yaml
# uart_esp_3: !include packages/board/board_options_itf_uart_esp_3.yaml
# ESP32_CAN (TJA105x, SN65HVD230, M5Stack CAN base/unit)
canbus_node_1: !include
file: packages/board/board_options_itf_canbus_esp32_can.yaml
vars:
canbus_node_id: 'canbus_inverter_1'
# MCP2515
# canbus_node_2: !include
# file: packages/board/board_options_itf_canbus_mcp2515.yaml
# vars:
# canbus_node_id: 'canbus_bms_1'
############################################################
shunt1: !include
file: packages/shunt/shunt_combine_FAKE.yaml
vars:
shunt_id: '1' # must be a number
shunt_name: 'Shunt 1'
# Shunt sensors values
shunt_voltage: '53.41' # V
shunt_current: '37.5' # A
shunt_power: '2003' # W
shunt_soc: '86' # %
bms1: !include
file: packages/bms/bms_combine_FAKE.yaml
vars:
bms_id: '1' # must be a number
bms_name: 'BMS 1'
# BMS sensors values
bms_battery_capacity: '280' # Ah
bms_battery_capacity_remaining: '243' # Ah
bms_voltage: '53.45' # V
bms_current: '9.2' # A
bms_power: '492' # W
bms_soc: '87' # %
bms_soh: '99' # %
bms_min_cell_voltage: '3.339' # V
bms_min_voltage_cell: '2' # cell number 1~16
bms_max_cell_voltage: '3.341' # V
bms_max_voltage_cell: '11' # cell number 1~16
bms_temperature_sensor_1: '21.1' # °C
bms_temperature_sensor_2: '21.3' # °C
bms_temperature_sensor_3: '21.5' # °C
bms_temperature_sensor_4: '21.7' # °C
bms_max_charge_current: '100' # A
bms_max_discharge_current: '100' # A
bms_cell_ovp: '3.650' # V Used by 'Auto CCL' functions
bms_cell_uvp: '2.800' # V Used by 'Auto DCL' functions and to calculate maximum discharge voltage
bms_balance_trigger_voltage: '0.010' # V Used by 'Auto CVL' functions
bms_charging_cycles: '178' # charging cycles number Used to calculate the SoH
bms2: !include
file: packages/bms/bms_combine_FAKE.yaml
vars:
bms_id: '2' # must be a number
bms_name: 'BMS 2'
# BMS sensors values
bms_battery_capacity: '280' # Ah
bms_battery_capacity_remaining: '238' # Ah
bms_voltage: '53.41' # V
bms_current: '11.3' # A
bms_power: '604' # W
bms_soc: '85' # %
bms_soh: '89' # %
bms_min_cell_voltage: '3.337' # V
bms_min_voltage_cell: '14' # cell number 1~16
bms_max_cell_voltage: '3.339' # V
bms_max_voltage_cell: '3' # cell number 1~16
bms_temperature_sensor_1: '21.8' # °C
bms_temperature_sensor_2: '21.6' # °C
bms_temperature_sensor_3: '21.4' # °C
bms_temperature_sensor_4: '21.2' # °C
bms_max_charge_current: '100' # A
bms_max_discharge_current: '100' # A
bms_cell_ovp: '3.650' # V Used by 'Auto CCL' functions
bms_cell_uvp: '2.800' # V Used by 'Auto DCL' functions and to calculate maximum discharge voltage
bms_balance_trigger_voltage: '0.010' # V Used by 'Auto CVL' functions
bms_charging_cycles: '226' # charging cycles number Used to calculate the SoH
bms3: !include
file: packages/bms/bms_combine_FAKE.yaml
vars:
bms_id: '3' # must be a number
bms_name: 'BMS 3'
# BMS sensors values
bms_battery_capacity: '280' # Ah
bms_battery_capacity_remaining: '232' # Ah
bms_voltage: '53.37' # V
bms_current: '15.7' # A
bms_power: '838' # W
bms_soc: '83' # %
bms_soh: '79' # %
bms_min_cell_voltage: '3.334' # V
bms_min_voltage_cell: '7' # cell number 1~16
bms_max_cell_voltage: '3.336' # V
bms_max_voltage_cell: '9' # cell number 1~16
bms_temperature_sensor_1: '21.9' # °C
bms_temperature_sensor_2: '22.0' # °C
bms_temperature_sensor_3: '22.1' # °C
bms_temperature_sensor_4: '22.2' # °C
bms_max_charge_current: '100' # A
bms_max_discharge_current: '100' # A
bms_cell_ovp: '3.650' # V Used by 'Auto CCL' functions
bms_cell_uvp: '2.800' # V Used by 'Auto DCL' functions and to calculate maximum discharge voltage
bms_balance_trigger_voltage: '0.010' # V Used by 'Auto CVL' functions
bms_charging_cycles: '194' # charging cycles number Used to calculate the SoH
yambms: !include packages/yambms/yambms.yaml
# yambms_custom: !include yambms_custom.yaml
canbus1: !include
file: packages/yambms/yambms_canbus.yaml
vars:
canbus_id: 'canbus1'
canbus_name: 'CANBUS 1'
canbus_node_id: 'canbus_inverter_1'
canbus_light_id: 'esp_light'
# The CANBUS link will be considered down if no response from the inverter (ID 0x305) for 5s
# The Deye inverter sends the ACK (can_id 0x305) only when it receives the can_id 0x356
canbus_link_timer: '5s'
# +--------------------------------------+
# | DEBUG ( logger level must be DEBUG ) |
# +--------------------------------------+
device_debug: !include
file: packages/base/device_debug_ESP32.yaml
vars:
debug_name: 'Debug'
debug_update_interval: '5s'
+281
View File
@@ -0,0 +1,281 @@
# Updated : 2025.04.01
# Version : 1.5.5
# GitHub : https://github.com/Sleeper85/esphome-yambms
# YamBMS ( Yet another multi-BMS Merging Solution )
# This YAML is free software: you can redistribute it and/or
# modify it under the terms of the GNU General Public License
# as published by the Free Software Foundation, either version 3
# of the License, or (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
# See the GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program. If not, see <http://www.gnu.org/licenses/gpl.html>.
######################## YamBMS Local Packages Version #########################
# You need to copy the `packages` folder into the same folder as this YAML in order to compile it.
# Don't forget to configure your WiFi credentials in the secrets.yaml
################################################################################
# Don't forget to configure your WiFi credentials in the secrets.yaml
#
# If needed, configure a static IP here
# wifi:
# manual_ip:
# static_ip: 192.168.0.85
# gateway: 192.168.0.1
# subnet: 255.255.255.0
# dns1: 8.8.8.8
# dns2: 8.8.4.4
logger:
level: INFO # VERBOSE / DEBUG / INFO / WARN
ota:
platform: esphome
# Please use the native `api` component instead of the `mqtt` section.
# If you use Home Assistant, the native API is more lightweight.
# If there is no HA server connected to this API, the ESP32 reboots every 15 minutes to try to resolve the problem.
# The "reboot_timeout: 0s" option will keep your ESP32 up and running even if you lose connection to your HA server.
api:
reboot_timeout: 0s
# If you don't want to use ESPHome's native API you can use MQTT instead.
# In this case don't forget to remove the 'api:' section.
# mqtt:
# broker: !secret mqtt_host
# username: !secret mqtt_username
# password: !secret mqtt_password
# id: mqtt_client
# Please note that enabling this component will take up a lot of memory and may decrease
# stability and be the cause of reboot depending on the capabilities of the board used.
# web_server:
# port: 80
# log: false
# ota: false
# +--------------------------------------+
# | Global Settings |
# +--------------------------------------+
substitutions:
# ESP32 name / hostname
name: yambms
# +--------------------------------------+
# | YamBMS Settings |
# +--------------------------------------+
# Please read the cut-off charging logic README to understand how the YamBMS works
yambms_id: 'yambms1'
yambms_name: 'YamBMS 1'
yambms_update_interval: '1s'
# Input numbers can be displayed as a slider or an input box, options are 'slider' or 'box'.
yambms_input_number_mode: 'slider'
# Please check and fill in the options below correctly according to your battery chemistry and number of cells in series.
# These parameters are important and used for charging logic.
# Battery Chemistry
yambms_battery_chemistry: '1' # 1-LFP | 2-Li-ion | 3-LTO
# Number of cells in series
yambms_cell_count: '16'
# Bulk / Absorption Voltage : corresponds to the Bulk voltage that will be used to charge the battery. (LFP : 55.2V = 3.45V/Cell for 16S battery)
yambms_bulk_v: '55.2'
# Float Voltage : corresponds to the voltage at which the battery would be maintained at the end of charge. (LFP : 53.6V = 3.35V/Cell for 16S battery)
yambms_float_v: '53.6'
# Rebulk voltage, voltage from which a new Bulk charge can start. (LFP : 52.8V = 3.3V/Cell for 16S battery)
yambms_rebulk_v: '52.8'
# Maximum time in minutes that the cut-off step can last before charging is complete
# If your cells are properly balanced this step ends at the fastest after the `cut-off timer`
# This timer can be deactivated with a switch
yambms_eoc_timer: '30'
# Time in seconds during which the end of charge conditions must be respected (cut-off + cells not equalizing)
yambms_cutoff_timer: '60'
# +--------------------------------------+
# | Shunt Settings |
# +--------------------------------------+
shunt_update_interval: '3s' # frequency at which Shunt data is refreshed
shunt_combine_interval: '1s' # frequency at which Shunt data is combined in YamBMS
# +--------------------------------------+
# | BMS Settings |
# +--------------------------------------+
bms_update_interval: '3s' # frequency at which BMS data is refreshed, going below '3s' can cause problems
bms_combine_interval: '1s' # frequency at which BMS data is combined in YamBMS
bms_cutoff_timer: '50s' # time during which the end of charge conditions must be respected (cut-off + cells not equalizing)
# +--------------------------------------+
# | Packages |
# +--------------------------------------+
# PLEASE READ : https://github.com/Sleeper85/esphome-yambms/blob/main/documents/README/YamBMS_main_YAML_HowTo.md
packages:
############### >>> UNCOMMENT YOUR BOARD <<< ###############
############### >>> ONLY ONE BOARD ! <<< ###############
# This list is incomplete, other board.yaml are available in the board folder
device_board: !include packages/board/board_ESP32_Generic.yaml
# device_board: !include packages/board/board_ESP32_DevKit-V1.yaml
# device_board: !include packages/board/board_ESP32_LilyGo-T-CAN485.yaml
# device_board: !include packages/board/board_ESP32_EVB.yaml
# device_board: !include packages/board/board_ESP32_Atom-Lite.yaml
# device_board: !include packages/board/board_ESP32-C3_ETH01-EVO.yaml
# device_board: !include packages/board/board_ESP32-S3_DevKitC-1.yaml
# device_board: !include packages/board/board_ESP32-S3_LilyGo-T-Connect.yaml
# device_board: !include packages/board/board_ESP32-S3_AtomS3-Lite.yaml
# device_board: !include
# file: packages/board/board_ESP32-S3_AtomS3.yaml # board_ESP32-S3_AtomS3R.yaml
# vars:
# display_auto_next_page_interval: '5s'
########### >>> UNCOMMENT YOUR BOARD OPTIONS <<< ###########
uart_esp_1: !include packages/board/board_options_itf_uart_esp_1.yaml
uart_esp_2: !include packages/board/board_options_itf_uart_esp_2.yaml
uart_esp_3: !include packages/board/board_options_itf_uart_esp_3.yaml
# ESP32_CAN (TJA105x, SN65HVD230, M5Stack CAN base/unit)
canbus_node_1: !include
file: packages/board/board_options_itf_canbus_esp32_can.yaml
vars:
canbus_node_id: 'canbus_inverter_1'
# MCP2515
# canbus_node_2: !include
# file: packages/board/board_options_itf_canbus_mcp2515.yaml
# vars:
# canbus_node_id: 'canbus_bms_1'
############################################################
# The sniffer represents the ESP node connected to the JK-BMS PB RS485 bus
# If address 0x00 is not detected on the RS485 bus, the sniffer will act directly as a master BMS (mode 2, max 15 BMS)
# sniffer1: !include
# file: packages/bms/bms_combine_JK_RS485_Modbus_sniffer_talk_pin.yaml
# vars:
# sniffer_id: 'sniffer1'
# sniffer_protocol: 'JK02_32S'
# sniffer_uart_id: 'uart_esp_1'
# sniffer_talk_pin: 8 # ESP32: 4, ESP32-S3: 8, ESP32-C3: 10
sniffer1: !include
file: packages/bms/bms_combine_JK_RS485_Modbus_sniffer.yaml
vars:
sniffer_id: 'sniffer1'
sniffer_protocol: 'JK02_32S'
sniffer_uart_id: 'uart_esp_1'
# Mode2 : configure the DIP switches of your BMS from 0x01 to 0x0F (don't use the 0x00 address, maximum 15 BMS)
bms1: !include
file: packages/bms/bms_combine_JK_RS485_Modbus_bms_standard.yaml
vars:
# Sniffer ID
sniffer_id: 'sniffer1'
# BMS vars
bms_id: '1' # must be a number
bms_name: 'JK-BMS 1'
bms_address: '0x01' # BMS 1 DIP switch
bms2: !include
file: packages/bms/bms_combine_JK_RS485_Modbus_bms_standard.yaml
vars:
# Sniffer ID
sniffer_id: 'sniffer1'
# BMS vars
bms_id: '2' # must be a number
bms_name: 'JK-BMS 2'
bms_address: '0x02' # BMS 2 DIP switch
bms3: !include
file: packages/bms/bms_combine_JK_RS485_Modbus_bms_standard.yaml
vars:
# Sniffer ID
sniffer_id: 'sniffer1'
# BMS vars
bms_id: '3' # must be a number
bms_name: 'JK-BMS 3'
bms_address: '0x03' # BMS 3 DIP switch
bms4: !include
file: packages/bms/bms_combine_JK_RS485_Modbus_bms_standard.yaml
vars:
# Sniffer ID
sniffer_id: 'sniffer1'
# BMS vars
bms_id: '4' # must be a number
bms_name: 'JK-BMS 4'
bms_address: '0x04' # BMS 4 DIP switch
bms5: !include
file: packages/bms/bms_combine_JK_RS485_Modbus_bms_standard.yaml
vars:
# Sniffer ID
sniffer_id: 'sniffer1'
# BMS vars
bms_id: '5' # must be a number
bms_name: 'JK-BMS 5'
bms_address: '0x05' # BMS 5 DIP switch
bms6: !include
file: packages/bms/bms_combine_JK_RS485_Modbus_bms_standard.yaml
vars:
# Sniffer ID
sniffer_id: 'sniffer1'
# BMS vars
bms_id: '6' # must be a number
bms_name: 'JK-BMS 6'
bms_address: '0x06' # BMS 6 DIP switch
bms7: !include
file: packages/bms/bms_combine_JK_RS485_Modbus_bms_standard.yaml
vars:
# Sniffer ID
sniffer_id: 'sniffer1'
# BMS vars
bms_id: '7' # must be a number
bms_name: 'JK-BMS 7'
bms_address: '0x07' # BMS 7 DIP switch
bms8: !include
file: packages/bms/bms_combine_JK_RS485_Modbus_bms_standard.yaml
vars:
# Sniffer ID
sniffer_id: 'sniffer1'
# BMS vars
bms_id: '8' # must be a number
bms_name: 'JK-BMS 8'
bms_address: '0x08' # BMS 8 DIP switch
yambms: !include packages/yambms/yambms.yaml
# yambms_custom: !include yambms_custom.yaml
canbus1: !include
file: packages/yambms/yambms_canbus.yaml
vars:
canbus_id: 'canbus1'
canbus_name: 'CANBUS 1'
canbus_node_id: 'canbus_inverter_1'
canbus_light_id: 'esp_light'
# The CANBUS link will be considered down if no response from the inverter (ID 0x305) for 5s
# The Deye inverter sends the ACK (can_id 0x305) only when it receives the can_id 0x356
canbus_link_timer: '5s'
# +--------------------------------------+
# | DEBUG ( logger level must be DEBUG ) |
# +--------------------------------------+
device_debug: !include
file: packages/base/device_debug_ESP32.yaml
vars:
debug_name: 'Debug'
debug_update_interval: '5s'
+200
View File
@@ -0,0 +1,200 @@
# Updated : 2025.04.01
# Version : 1.5.5
# GitHub : https://github.com/Sleeper85/esphome-yambms
# YamBMS ( Yet another multi-BMS Merging Solution )
# This YAML is free software: you can redistribute it and/or
# modify it under the terms of the GNU General Public License
# as published by the Free Software Foundation, either version 3
# of the License, or (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
# See the GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program. If not, see <http://www.gnu.org/licenses/gpl.html>.
######################## YamBMS Local Packages Version #########################
# You need to copy the `packages` folder into the same folder as this YAML in order to compile it.
# Don't forget to configure your WiFi credentials in the secrets.yaml
################################################################################
# Don't forget to configure your WiFi credentials in the secrets.yaml
#
# If needed, configure a static IP here
# wifi:
# manual_ip:
# static_ip: 192.168.0.85
# gateway: 192.168.0.1
# subnet: 255.255.255.0
# dns1: 8.8.8.8
# dns2: 8.8.4.4
logger:
level: INFO # VERBOSE / DEBUG / INFO / WARN
ota:
platform: esphome
# Please use the native `api` component instead of the `mqtt` section.
# If you use Home Assistant, the native API is more lightweight.
# If there is no HA server connected to this API, the ESP32 reboots every 15 minutes to try to resolve the problem.
# The "reboot_timeout: 0s" option will keep your ESP32 up and running even if you lose connection to your HA server.
api:
reboot_timeout: 0s
# If you don't want to use ESPHome's native API you can use MQTT instead.
# In this case don't forget to remove the 'api:' section.
# mqtt:
# broker: !secret mqtt_host
# username: !secret mqtt_username
# password: !secret mqtt_password
# id: mqtt_client
# Please note that enabling this component will take up a lot of memory and may decrease
# stability and be the cause of reboot depending on the capabilities of the board used.
# web_server:
# port: 80
# log: false
# ota: false
# +--------------------------------------+
# | Global Settings |
# +--------------------------------------+
substitutions:
# ESP32 name / hostname
name: pvbrain2
# +--------------------------------------+
# | YamBMS Settings |
# +--------------------------------------+
# Please read the cut-off charging logic README to understand how the YamBMS works
yambms_id: 'yambms1'
yambms_name: 'YamBMS 1'
yambms_update_interval: '1s'
# Input numbers can be displayed as a slider or an input box, options are 'slider' or 'box'.
yambms_input_number_mode: 'slider'
# Please check and fill in the options below correctly according to your battery chemistry and number of cells in series.
# These parameters are important and used for charging logic.
# Battery Chemistry
yambms_battery_chemistry: '1' # 1-LFP | 2-Li-ion | 3-LTO
# Number of cells in series
yambms_cell_count: '16'
# Bulk / Absorption Voltage : corresponds to the Bulk voltage that will be used to charge the battery. (LFP : 55.2V = 3.45V/Cell for 16S battery)
yambms_bulk_v: '55.2'
# Float Voltage : corresponds to the voltage at which the battery would be maintained at the end of charge. (LFP : 53.6V = 3.35V/Cell for 16S battery)
yambms_float_v: '53.6'
# Rebulk voltage, voltage from which a new Bulk charge can start. (LFP : 52.8V = 3.3V/Cell for 16S battery)
yambms_rebulk_v: '52.8'
# Maximum time in minutes that the cut-off step can last before charging is complete
# If your cells are properly balanced this step ends at the fastest after the `cut-off timer`
# This timer can be deactivated with a switch
yambms_eoc_timer: '30'
# Time in seconds during which the end of charge conditions must be respected (cut-off + cells not equalizing)
yambms_cutoff_timer: '60'
# +--------------------------------------+
# | Shunt Settings |
# +--------------------------------------+
shunt_update_interval: '3s' # frequency at which Shunt data is refreshed
shunt_combine_interval: '1s' # frequency at which Shunt data is combined in YamBMS
# +--------------------------------------+
# | BMS Settings |
# +--------------------------------------+
bms_update_interval: '3s' # frequency at which BMS data is refreshed, going below '3s' can cause problems
bms_combine_interval: '1s' # frequency at which BMS data is combined in YamBMS
bms_cutoff_timer: '50s' # time during which the end of charge conditions must be respected (cut-off + cells not equalizing)
# +--------------------------------------+
# | WK2168 UART expander |
# +--------------------------------------+
uart0_baudrate: '2400' #WKS {RJ45-UART0}
uart1_baudrate: '38400' #JSY193
uart2_baudrate: '19200' #SmartShunt
uart3_baudrate: '9600' #SRNE {RJ45-UART3}
uart4_baudrate: '115200' #JK-BMS 1
uart5_baudrate: '115200' #JK-BMS 2
uart6_baudrate: '115200' #Pylontech
uart7_baudrate: '9600' #EPEVER {RJ45-UART7}
# +--------------------------------------+
# | PVbrain2 packages |
# +--------------------------------------+
packages:
device_board: !include packages/board/board_ESP32-S3_DevKitC-1_PVbrain2.yaml
# BUS
# bus_i2c0: !include pvbrain2/base/device_bus_i2c0.yaml # SX1509 and BME280/BMP280
bus_spi1: !include pvbrain2/base/device_bus_spi1.yaml # MCP2515
# bus_one_wire: !include pvbrain2/base/device_bus_one_wire.yaml # Dallas
# Devices
# device_uart_esp: !include pvbrain2/base/device_uart_esp.yaml
device_wk2168_spi: !include pvbrain2/base/device_wk2168_spi.yaml
# device_wk2168_i2c: !include pvbrain2/base/device_wk2168_i2c.yaml
# device_sx1509: !include pvbrain2/base/device_sx1509.yaml
device_canbus_node1: !include pvbrain2/base/device_canbus_esp32can.yaml # canbus_node1
device_canbus_node2: !include pvbrain2/base/device_canbus_mcp2515.yaml # canbus_node2
# +--------------------------------------+
# | YamBMS packages |
# +--------------------------------------+
# PLEASE READ : https://github.com/Sleeper85/esphome-yambms/blob/main/documents/README/YamBMS_main_YAML_HowTo.md
# You don't have to import a shunt but you must import at least one BMS.
shunt1: !include
file: packages/shunt/shunt_combine_Victron_SmartShunt_UART_expander.yaml # shunt_combine_Junctek_KHF_UART.yaml
vars:
shunt_id: '1' # must be a number
shunt_name: 'Shunt 1'
shunt_uart_id: 'uart_${uart_hub_bus}_2'
bms1: !include
file: packages/bms/bms_combine_JK_UART_4G-GPS_full.yaml
vars:
bms_id: '1' # must be a number
bms_name: 'JK-BMS 1'
bms_uart_id: 'uart_${uart_hub_bus}_4'
# Maximum cell charging cycles is used to calculate the battey SoH.
# MB31=8000.0, LF280K v3=8000.0, LF280K v2=6000.0, LF280=3000.0 (decimal is required)
bms_cell_max_cycles: '6000.0'
bms2: !include
file: packages/bms/bms_combine_JK_UART_4G-GPS_full.yaml
vars:
bms_id: '2' # must be a number
bms_name: 'JK-BMS 2'
bms_uart_id: 'uart_${uart_hub_bus}_5'
# Maximum cell charging cycles is used to calculate the battey SoH.
# MB31=8000.0, LF280K v3=8000.0, LF280K v2=6000.0, LF280=3000.0 (decimal is required)
bms_cell_max_cycles: '6000.0'
yambms: !include packages/yambms/yambms.yaml
# yambms_custom: !include yambms_custom.yaml
canbus1: !include
file: packages/yambms/yambms_canbus.yaml
vars:
canbus_id: 'canbus1'
canbus_name: 'CANBUS 1'
canbus_node_id: 'canbus_node1'
canbus_light_id: 'esp_light'
# The CANBUS link will be considered down if no response from the inverter (ID 0x305) for 5s
# The Deye inverter sends the ACK (can_id 0x305) only when it receives the can_id 0x356
canbus_link_timer: '5s'
# +--------------------------------------+
# | DEBUG ( logger level must be DEBUG ) |
# +--------------------------------------+
device_debug: !include
file: packages/base/device_debug_ESP32.yaml
vars:
debug_name: 'Debug'
debug_update_interval: '5s'
+210
View File
@@ -0,0 +1,210 @@
# Updated : 2025.04.01
# Version : 1.5.5
# GitHub : https://github.com/Sleeper85/esphome-yambms
# YamBMS ( Yet another multi-BMS Merging Solution )
# This YAML is free software: you can redistribute it and/or
# modify it under the terms of the GNU General Public License
# as published by the Free Software Foundation, either version 3
# of the License, or (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
# See the GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program. If not, see <http://www.gnu.org/licenses/gpl.html>.
######################## YamBMS Local Packages Version #########################
# You need to copy the `packages` folder into the same folder as this YAML in order to compile it.
# Don't forget to configure your WiFi credentials in the secrets.yaml
################################################################################
# Don't forget to configure your WiFi credentials in the secrets.yaml
#
# If needed, configure a static IP here
# wifi:
# manual_ip:
# static_ip: 192.168.0.85
# gateway: 192.168.0.1
# subnet: 255.255.255.0
# dns1: 8.8.8.8
# dns2: 8.8.4.4
logger:
level: INFO # VERBOSE / DEBUG / INFO / WARN
ota:
platform: esphome
# Please use the native `api` component instead of the `mqtt` section.
# If you use Home Assistant, the native API is more lightweight.
# If there is no HA server connected to this API, the ESP32 reboots every 15 minutes to try to resolve the problem.
# The "reboot_timeout: 0s" option will keep your ESP32 up and running even if you lose connection to your HA server.
api:
reboot_timeout: 0s
# If you don't want to use ESPHome's native API you can use MQTT instead.
# In this case don't forget to remove the 'api:' section.
# mqtt:
# broker: !secret mqtt_host
# username: !secret mqtt_username
# password: !secret mqtt_password
# id: mqtt_client
# Please note that enabling this component will take up a lot of memory and may decrease
# stability and be the cause of reboot depending on the capabilities of the board used.
# web_server:
# port: 80
# log: false
# ota: false
# +--------------------------------------+
# | Global Settings |
# +--------------------------------------+
substitutions:
# ESP32 name / hostname
name: yambms
# +--------------------------------------+
# | YamBMS Settings |
# +--------------------------------------+
# Please read the cut-off charging logic README to understand how the YamBMS works
yambms_id: 'yambms1'
yambms_name: 'YamBMS 1'
yambms_update_interval: '1s'
# Input numbers can be displayed as a slider or an input box, options are 'slider' or 'box'.
yambms_input_number_mode: 'slider'
# Please check and fill in the options below correctly according to your battery chemistry and number of cells in series.
# These parameters are important and used for charging logic.
# Battery Chemistry
yambms_battery_chemistry: '1' # 1-LFP | 2-Li-ion | 3-LTO
# Number of cells in series
yambms_cell_count: '16'
# Bulk / Absorption Voltage : corresponds to the Bulk voltage that will be used to charge the battery. (LFP : 55.2V = 3.45V/Cell for 16S battery)
yambms_bulk_v: '55.2'
# Float Voltage : corresponds to the voltage at which the battery would be maintained at the end of charge. (LFP : 53.6V = 3.35V/Cell for 16S battery)
yambms_float_v: '53.6'
# Rebulk voltage, voltage from which a new Bulk charge can start. (LFP : 52.8V = 3.3V/Cell for 16S battery)
yambms_rebulk_v: '52.8'
# Maximum time in minutes that the cut-off step can last before charging is complete
# If your cells are properly balanced this step ends at the fastest after the `cut-off timer`
# This timer can be deactivated with a switch
yambms_eoc_timer: '30'
# Time in seconds during which the end of charge conditions must be respected (cut-off + cells not equalizing)
yambms_cutoff_timer: '60'
# +--------------------------------------+
# | Shunt Settings |
# +--------------------------------------+
shunt_update_interval: '3s' # frequency at which Shunt data is refreshed
shunt_combine_interval: '1s' # frequency at which Shunt data is combined in YamBMS
# +--------------------------------------+
# | BMS Settings |
# +--------------------------------------+
bms_update_interval: '3s' # frequency at which BMS data is refreshed, going below '3s' can cause problems
bms_combine_interval: '1s' # frequency at which BMS data is combined in YamBMS
bms_cutoff_timer: '50s' # time during which the end of charge conditions must be respected (cut-off + cells not equalizing)
# +--------------------------------------+
# | Packages |
# +--------------------------------------+
# PLEASE READ : https://github.com/Sleeper85/esphome-yambms/blob/main/documents/README/YamBMS_main_YAML_HowTo.md
packages:
############### >>> UNCOMMENT YOUR BOARD <<< ###############
############### >>> ONLY ONE BOARD ! <<< ###############
# This list is incomplete, other board.yaml are available in the board folder
device_board: !include packages/board/board_ESP32_Generic.yaml
# device_board: !include packages/board/board_ESP32_DevKit-V1.yaml
# device_board: !include packages/board/board_ESP32_LilyGo-T-CAN485.yaml
# device_board: !include packages/board/board_ESP32_EVB.yaml
# device_board: !include packages/board/board_ESP32_Atom-Lite.yaml
# device_board: !include packages/board/board_ESP32-C3_ETH01-EVO.yaml
# device_board: !include packages/board/board_ESP32-S3_DevKitC-1.yaml
# device_board: !include packages/board/board_ESP32-S3_LilyGo-T-Connect.yaml
# device_board: !include packages/board/board_ESP32-S3_AtomS3-Lite.yaml
# device_board: !include
# file: packages/board/board_ESP32-S3_AtomS3.yaml # board_ESP32-S3_AtomS3R.yaml
# vars:
# display_auto_next_page_interval: '5s'
########### >>> UNCOMMENT YOUR BOARD OPTIONS <<< ###########
uart_esp_1: !include packages/board/board_options_itf_uart_esp_1.yaml
uart_esp_2: !include packages/board/board_options_itf_uart_esp_2.yaml
uart_esp_3: !include packages/board/board_options_itf_uart_esp_3.yaml
# ESP32_CAN (TJA105x, SN65HVD230, M5Stack CAN base/unit)
canbus_node_1: !include
file: packages/board/board_options_itf_canbus_esp32_can.yaml
vars:
canbus_node_id: 'canbus_inverter_1'
# MCP2515
# canbus_node_2: !include
# file: packages/board/board_options_itf_canbus_mcp2515.yaml
# vars:
# canbus_node_id: 'canbus_bms_1'
############################################################
shunt1: !include
# file: packages/shunt/shunt_combine_Junctek_KHF_UART.yaml
file: packages/shunt/shunt_combine_Victron_SmartShunt_UART.yaml
vars:
shunt_id: '1' # must be a number
shunt_name: 'Shunt 1'
shunt_uart_id: 'uart_esp_3'
bms1: !include
file: packages/bms/bms_combine_JK_UART_4G-GPS_full.yaml
vars:
bms_id: '1' # must be a number
bms_name: 'JK-BMS 1'
bms_uart_id: 'uart_esp_1'
# Maximum cell charging cycles is used to calculate the battey SoH.
# MB31=8000.0, LF280K v3=8000.0, LF280K v2=6000.0, LF280=3000.0 (decimal is required)
bms_cell_max_cycles: '6000.0'
bms2: !include
file: packages/bms/bms_combine_JK_UART_4G-GPS_full.yaml
vars:
bms_id: '2' # must be a number
bms_name: 'JK-BMS 2'
bms_uart_id: 'uart_esp_2'
# Maximum cell charging cycles is used to calculate the battey SoH.
# MB31=8000.0, LF280K v3=8000.0, LF280K v2=6000.0, LF280=3000.0 (decimal is required)
bms_cell_max_cycles: '6000.0'
yambms: !include packages/yambms/yambms.yaml
# yambms_custom: !include yambms_custom.yaml
canbus1: !include
file: packages/yambms/yambms_canbus.yaml
vars:
canbus_id: 'canbus1'
canbus_name: 'CANBUS 1'
canbus_node_id: 'canbus_inverter_1'
canbus_light_id: 'esp_light'
# The CANBUS link will be considered down if no response from the inverter (ID 0x305) for 5s
# The Deye inverter sends the ACK (can_id 0x305) only when it receives the can_id 0x356
canbus_link_timer: '5s'
# +--------------------------------------+
# | DEBUG ( logger level must be DEBUG ) |
# +--------------------------------------+
device_debug: !include
file: packages/base/device_debug_ESP32.yaml
vars:
debug_name: 'Debug'
debug_update_interval: '5s'