meine configfile

This commit is contained in:
k2dp2k authored and GitHub committed 2025-06-08 21:57:40 +02:00
1 parent 9e9024225d
commit 2f53ed1eb2
1 file changed
+226
+226
View File
@@ -0,0 +1,226 @@
# Updated : 2025.04.07
# Version : 1.5.5
# GitHub : https://github.com/Sleeper85/esphome-yambms
# YamBMS ( Yet another multi-BMS Merging Solution )
# This YAML is free software: you can redistribute it and/or
# modify it under the terms of the GNU General Public License
# as published by the Free Software Foundation, either version 3
# of the License, or (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
# See the GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program. If not, see <http://www.gnu.org/licenses/gpl.html>.
######################## YamBMS Local Packages Version #########################
# You need to copy the `packages` folder into the same folder as this YAML in order to compile it.
# Don't forget to configure your WiFi credentials in the secrets.yaml
################################################################################
# Don't forget to configure your WiFi credentials in the secrets.yaml
#
# If needed, configure a static IP here
wifi:
#power_save_mode: none
#manual_ip:
# static_ip: 192.168.8.1
# gateway: 192.168.8.1
# subnet: 255.255.255.0
logger:
level: INFO # VERBOSE / DEBUG / INFO / WARN
ota:
platform: esphome
# Please use the native `api` component instead of the `mqtt` section.
# If you use Home Assistant, the native API is more lightweight.
# If there is no HA server connected to this API, the ESP32 reboots every 15 minutes to try to resolve the problem.
# The "reboot_timeout: 0s" option will keep your ESP32 up and running even if you lose connection to your HA server.
api:
reboot_timeout: 0s
# If you don't want to use ESPHome's native API you can use MQTT instead.
# In this case don't forget to remove the 'api:' section.
#mqtt:
# broker: 192.168.0.57
# username: daniel
# password: daniel
#id: yambms
# Please note that enabling this component will take up a lot of memory and may decrease
# stability and be the cause of reboot depending on the capabilities of the board used.
#web_server:
# port: 80
# log: false
# ota: false
# +--------------------------------------+
# | Global Settings |
# +--------------------------------------+
substitutions:
# ESP32 name / hostname
name: ''
hostname: 'yambms' # This is the name of the node. It should always be unique in your ESPHome network.
friendly_name : 'YamBMS'
# +--------------------------------------+
# | YamBMS Settings |
# +--------------------------------------+
# Please read the cut-off charging logic README to understand how the YamBMS works
yambms_id: 'yambms1'
yambms_name: 'YamBMS 1'
yambms_update_interval: '1s'
# Input numbers can be displayed as a slider or an input box, options are 'slider' or 'box'.
yambms_input_number_mode: 'slider'
# Please check and fill in the options below correctly according to your battery chemistry and number of cells in series.
# These parameters are important and used for charging logic.
# Battery Chemistry
yambms_battery_chemistry: '1' # 1-LFP | 2-Li-ion | 3-LTO
# Number of cells in series
yambms_cell_count: '16'
# Bulk / Absorption Voltage : corresponds to the Bulk voltage that will be used to charge the battery. (LFP : 55.2V = 3.45V/Cell for 16S battery)
yambms_bulk_v: '55.2'
# Float Voltage : corresponds to the voltage at which the battery would be maintained at the end of charge. (LFP : 53.6V = 3.35V/Cell for 16S battery)
yambms_float_v: '53.6'
# Rebulk voltage, voltage from which a new Bulk charge can start. (LFP : 52.8V = 3.3V/Cell for 16S battery)
yambms_rebulk_v: '52.8'
# Maximum time in minutes that the cut-off step can last before charging is complete
# If your cells are properly balanced this step ends at the fastest after the `cut-off timer`
# This timer can be deactivated with a switch
yambms_eoc_timer: '60'
# Time in seconds during which the end of charge conditions must be respected (cut-off + cells not equalizing)
yambms_cutoff_timer: '300'
# +--------------------------------------+
# | Shunt Settings |
# +--------------------------------------+
shunt_update_interval: '3s' # frequency at which Shunt data is refreshed
shunt_combine_interval: '1s' # frequency at which Shunt data is combined in YamBMS
# +--------------------------------------+
# | BMS Settings |
# +--------------------------------------+
bms_update_interval: '3s' # frequency at which BMS data is refreshed, going below '3s' can cause problems
bms_combine_interval: '1s' # frequency at which BMS data is combined in YamBMS
bms_cutoff_timer: '50s' # time during which the end of charge conditions must be respected (cut-off + cells not equalizing)
# +--------------------------------------+
# | Packages |
# +--------------------------------------+
# PLEASE READ : https://github.com/Sleeper85/esphome-yambms/blob/main/documents/README/YamBMS_main_YAML_HowTo.md
packages:
################ >>> CONFIG & CUSTOM LP <<< ################
# Local Packages intended for creating custom codes
# or sharing settings between several main.yaml
# yambms_config: !include yambms_config.yaml
# yambms_custom: !include yambms_custom.yaml
############### >>> UNCOMMENT YOUR BOARD <<< ###############
############### >>> ONLY ONE BOARD ! <<< ###############
# This list is incomplete, other board.yaml are available in the board folder
# device_board: !include packages/board/board_ESP32_Generic.yaml
# device_board: !include packages/board/board_ESP32_DevKit-V1.yaml
# device_board: !include packages/board/board_ESP32_LilyGo-T-CAN485.yaml
# device_board: !include packages/board/board_ESP32_EVB.yaml
# device_board: !include packages/board/board_ESP32_Atom-Lite.yaml
# device_board: !include packages/board/board_ESP32-C3_DevKitM-1.yaml
# device_board: !include packages/board/board_ESP32-C3_ETH01-EVO.yaml
device_board: !include packages/board/board_YamBoard_Deye_JK.yaml
# device_board: !include packages/board/board_ESP32-S3_DevKitC-1_LED-48.yaml
# device_board: !include packages/board/board_ESP32-S3_LilyGo-T-Connect.yaml
# device_board: !include packages/board/board_ESP32-S3_AtomS3-Lite.yaml
#device_board: !include
# file: packages/board/board_ESP32-S3_AtomS3.yaml
# vars:
# display_auto_next_page_interval: '5s'
########### >>> UNCOMMENT YOUR BOARD OPTIONS <<< ###########
uart_esp_1: !include packages/board/board_options_itf_uart_esp_1.yaml
# ESP32_CAN (TJA105x, SN65HVD230, M5Stack CAN base/unit)
canbus_node_1: !include
file: packages/board/board_options_itf_canbus_esp32_can.yaml
vars:
canbus_node_id: 'canbus_inverter_1'
shunt1: !include
file: packages/shunt/shunt_combine_Victron_SmartShunt_BLE.yaml #
vars:
shunt_id: '1' # must be a number
shunt_name: 'Shunt'
shunt_mac_address: 'c0960b5d8cba'
shunt_encryption_key: '1e196f635d4e5b0777afa79b47904937'
#shunt1: !include
# file: packages/shunt/shunt_combine_Victron_SmartShunt_UART.yaml
# vars:
# shunt_id: '1'
# shunt_name: 'Shunt 1'
# shunt_uart_id: 'uart_esp_2'
sniffer1: !include
file: packages/bms/bms_combine_JK_RS485_Modbus_sniffer.yaml
vars:
sniffer_id: 'sniffer1'
sniffer_protocol: 'JK02_32S'
sniffer_uart_id: 'uart_esp_1'
# Mode2 : configure the DIP switches of your BMS from 0x01 to 0x0F (don't use the 0x00 address, maximum 15 BMS)
bms1: !include
file: packages/bms/bms_combine_JK_RS485_Modbus_bms_standard.yaml
vars:
# Sniffer ID
sniffer_id: 'sniffer1'
# BMS vars
bms_id: '1' # must be a number
bms_name: 'JK-BMS 1'
bms_address: '0x01' # BMS 1 DIP switch
bms2: !include
file: packages/bms/bms_combine_JK_RS485_Modbus_bms_standard.yaml
vars:
# Sniffer ID
sniffer_id: 'sniffer1'
# BMS vars
bms_id: '2' # must be a number
bms_name: 'JK-BMS 2'
bms_address: '0x02' # BMS 2 DIP switch
yambms: !include packages/yambms/yambms.yaml
canbus1: !include
file: packages/yambms/yambms_canbus.yaml
vars:
canbus_id: 'canbus1'
canbus_name: 'CANBUS 1'
canbus_node_id: 'canbus_inverter_1'
canbus_light_id: 'esp_light'
# The CANBUS link will be considered down if no response from the inverter (ID 0x305) for 5s
# The Deye inverter sends the ACK (can_id 0x305) only when it receives the can_id 0x356
canbus_link_timer: '5s'
# +--------------------------------------+
# | DEBUG ( logger level must be DEBUG ) |
# +--------------------------------------+
device_debug: !include
file: packages/base/device_debug_ESP32.yaml
vars:
debug_name: 'Debug'
debug_update_interval: '5s'