AtomS3 display rollback to st7789v platform

This commit is contained in:
Sleeper85 committed 2025-01-04 16:55:17 +01:00
1 parent 43f995a7a9
commit 485c6cc5fb
1 file changed
+44 -173
+44 -173
View File
@@ -1,4 +1,4 @@
# Updated : 2024.12.23
# Updated : 2025.01.04
# Version : 1.2.5
# GitHub : https://github.com/Sleeper85/esphome-yambms
@@ -20,14 +20,13 @@
substitutions:
board_chip: "ESP32-S3"
board_name: "Atom S3"
# web_server_sorting_group: '666'
# From platform-espressif32 6.1.0
# https://github.com/espressif/esp-idf/releases
# https://github.com/platformio/platform-espressif32/releases
# https://github.com/espressif/esp-idf/releases
# https://github.com/platformio/platform-espressif32/releases
# esp32:
# board: m5stack-atoms3
# variant: esp32s3
# board: m5stack-atoms3
# variant: esp32s3
# Atom S3 - SKU:C123
# https://docs.m5stack.com/en/core/AtomS3
@@ -40,6 +39,13 @@ esp32:
esphome:
platformio_options:
board_build.flash_mode: dio # use Dual IO (dio) instead of Quad IO (qio) to prevent boot loop after flashing
on_boot:
- priority: 600
then:
- lambda: !lambda |-
id(my_display).enable();
id(my_display).transfer_byte(0x11);
id(my_display).disable();
wifi:
id: my_network
@@ -90,53 +96,8 @@ light:
id: esp_light
output: esp_output
# +--------------------------------------+
# | Atom S3 related configuration |
# +--------------------------------------+
# LCD 0.85"
# GPIO15 CS
# GPIO16 BL
# GPIO17 SCK
# GPIO21 MOSI
# GPIO33 RS
# GPIO34 LCD-RST
# GPIO4 IR
# GPIO41 BUTTON
packages:
display: !include board_display_128x128.yaml
spi:
- id: atom_spi_bus
clk_pin: GPIO17
mosi_pin: GPIO21
fan:
# Backlight Control Platform
- platform: speed
id: backlight
output: backlight_out
name: "${name} ${board_name} Backlight control"
# web_server:
# sorting_weight: ${web_server_sorting_group}00
# sorting_group_id: group_${web_server_sorting_group}
restore_mode: RESTORE_DEFAULT_ON
icon: mdi:brightness-6
output:
# Backlight Output Hardware
- platform: ledc
id: backlight_out
pin:
number: GPIO16
# allow_other_uses: true
# inverted: true
frequency: 120Hz
channel: 1
max_power: 1.00
min_power: 0.10
zero_means_zero: true
# Inverter Heartbeat Output (ESP32 board without LED)
# ESP32 board without LED
- platform: template
id: esp_output
type: binary
@@ -144,12 +105,23 @@ output:
- logger.log: "Inverter Heartbeat Output"
#- lambda: C++ code; # action to be performed at each inverter heartbeat
# +--------------------------------------+
# | Atom S3 related configuration |
# +--------------------------------------+
packages:
display: !include board_display_128x128.yaml
spi:
- id: atom_spi_bus
clk_pin: 17
mosi_pin: 21
binary_sensor:
# Atom S3 Button
- platform: gpio
id: atom_button
pin:
number: GPIO41
number: 41
inverted: true
mode:
input: true
@@ -158,127 +130,26 @@ binary_sensor:
- delayed_off: 10ms
on_press:
then:
- lambda: ESP_LOGI("Atom S3 Button", "Pressed");
- lambda: |-
// On press -> make sure set==ON & bri==100%
if ((id(backlight).speed != 100) || (id(backlight).state != true))
{
auto call = id(backlight).turn_on();
call.set_speed(100);
call.perform();
}
// if autodim enabled, execute script
if (id(backlight_autodim_time).state > 0)
{
id(backlight_autodim).execute();
}
- logger.log: Button Pressed
- display.page.show_next: my_display
#- display.page.show_previous: my_display
display:
# Atom S3 display see https://esphome.io/components/display/ili9xxx.html
- platform: ili9xxx
id: my_display
spi_id: atom_spi_bus
model: M5STACK # M5STACK / ST7789V
cs_pin: GPIO15
dc_pin: GPIO33
reset_pin: GPIO34
dimensions:
height: 128
width: 128
offset_height: 1
offset_width: 2
invert_colors: true
# Atom S3 display
# https://esphome.io/components/display/st7789v.html
- platform: st7789v
spi_id: atom_spi_bus
id: my_display
model: Custom
backlight_pin: 16
cs_pin: 15
dc_pin: 33
reset_pin: 34
height: 128
width: 128
offset_height: 2
offset_width: 1
eightbitcolor: true
update_interval: 1s
data_rate: 40Mhz
# rotation: 180 # use transform instead! https://esphome.io/components/display/ili9xxx.html
number:
# Backlight max Level
- platform: template
id: backlight_max_power
name: "${name} ${board_name} Backlight max Level"
# web_server:
# sorting_weight: ${web_server_sorting_group}05
# sorting_group_id: group_${web_server_sorting_group}
icon: mdi:brightness-7
optimistic: true
min_value: 0
max_value: 100
step: 1
initial_value: 75
restore_value: true
mode: box
unit_of_measurement: "%"
on_value:
then:
- lambda: |-
int speed = id(backlight).speed; // get actual level
id(backlight_out).set_max_power(x / 100); // set max_power
auto call = id(backlight).turn_on(); // reset level
call.set_speed(speed);
call.perform();
update_interval: 10s
# Backlight Auto-Dim time
- platform: template
id: backlight_autodim_time
name: "${name} ${board_name} Backlight Auto-Dim Time in min."
# web_server:
# sorting_weight: ${web_server_sorting_group}20
# sorting_group_id: group_${web_server_sorting_group}
icon: mdi:brightness-auto
optimistic: true
min_value: 0
max_value: 10
step: 0.1
initial_value: 0.2
restore_value: true
mode: box
unit_of_measurement: "min"
update_interval: never #5s
# Backlight Auto-Dim Level
- platform: template
id: backlight_autodim_level
name: "${name} ${board_name} Backlight Auto-Dim Level"
# web_server:
# sorting_weight: ${web_server_sorting_group}15
# sorting_group_id: group_${web_server_sorting_group}
icon: mdi:brightness-4
optimistic: true
min_value: 0
max_value: 100
step: 1
initial_value: 25
restore_value: true
mode: box
unit_of_measurement: "%"
update_interval: never #5s
script:
# Backlight Auto-Dimming Script
- id: backlight_autodim
mode: restart
then:
- delay: !lambda return id(backlight_autodim_time).state * 60 * 1000; // delay (x min * 60s * 1000ms)
- lambda: |- # Handle Dimlevel
int speed = id(backlight_autodim_level).state; // get desired dimlevel
if (speed == 0) // if dimmlevel = 0
{
auto call = id(backlight).turn_off(); // turn off backlight
call.perform();
}
else
{
auto call = id(backlight).turn_on(); // set dimlevel
call.set_speed(speed);
call.perform();
}
# web_server v3 needs to be added and sorting_groups must be defined to use grouping
# web_server:
# version: 3
# sorting_groups:
# - id: group_666
# name: "${board_name} Backlight Control"
# sorting_weight: -10000