Create board_ESP32-S3_WS-RS485-CAN.yaml

This commit is contained in:
Sleeper85 committed 2025-09-09 17:12:01 +02:00
1 parent b92bdfbb2a
commit 4e196395e1
1 file changed
+86
@@ -0,0 +1,86 @@
# Updated : 2025.09.09
# Version : 1.1.1
# GitHub : https://github.com/Sleeper85/esphome-yambms
# YamBMS ( Yet another multi-BMS Merging Solution )
# This YAML is free software: you can redistribute it and/or
# modify it under the terms of the GNU General Public License
# as published by the Free Software Foundation, either version 3
# of the License, or (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
# See the GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program. If not, see <http://www.gnu.org/licenses/gpl.html>.
# http://www.waveshare.com/wiki/ESP32-S3-RS485-CAN
substitutions:
board_chip: "ESP32-S3"
board_name: "WS RS485-CAN"
# Interfaces GPIOs
# uart_esp_1 RS485 port (RS485_EN = GPIO 21)
tx_pin_1: '17'
rx_pin_1: '18'
# uart_esp_2
tx_pin_2: '3'
rx_pin_2: '4'
# uart_esp_3
tx_pin_3: '5'
rx_pin_3: '6'
# canbus_esp32_can CAN port
tx_pin_4: '15'
rx_pin_4: '16'
# canbus_mcp2515
spi_mosi_pin: '11'
spi_miso_pin: '13'
spi_clk_pin: '12'
mcp2515_cs_pin: '10'
packages:
device_base: !include ../base/device_base.yaml
device_base_wifi: !include ../base/device_base_wifi.yaml
esp32:
board: esp32-s3-devkitc-1
flash_size: 16MB
cpu_frequency: 240MHz
framework:
type: esp-idf
esphome:
platformio_options:
board_build.flash_mode: dio # use Dual IO (dio) instead of Quad IO (qio) to prevent boot loop after flashing
wifi:
id: my_network
ssid: !secret wifi_ssid
password: !secret wifi_password
domain: !secret domain
logger:
baud_rate: 0 # frees the 3rd UART and avoids some bugs like "WK2168 with canbus" or "BLE client with RS485 modbus"
# +--------------------------------------+
# | Inverter Heartbeat Light |
# +--------------------------------------+
light:
# ESP Light used to see the inverter heartbeat
# Internal : only specifying an id without a name will implicitly set this to true.
- platform: binary
id: esp_light
output: esp_output
output:
# ESP32 board without LED
- platform: template
id: esp_output
type: binary
write_action:
- logger.log: "Inverter Heartbeat Output"
#- lambda: C++ code; # action to be performed at each inverter heartbeat