Added loop_task_stack_size option + documentation #306
This commit is contained in:
1 parent
c1579fed98
commit
9ddd618da7
55 files changed
+520
-89
No files matched your search
+7
-1
@@ -1,4 +1,4 @@
|
||||
# Updated : 2026.07.15
|
||||
# Updated : 2026.07.30
|
||||
# Version : 1.7.1
|
||||
# GitHub : https://github.com/Sleeper85/esphome-yambms
|
||||
|
||||
@@ -144,6 +144,12 @@ substitutions:
|
||||
# +--------------------------------------+
|
||||
enable_led_logging: 'false' # Set to true to see if an led is assigned to a component correctly, logged every 60 seconds
|
||||
enable_health_logging: 'false' # Set to true to see if component health for all component instances, logged every 60 seconds
|
||||
# +--------------------------------------+
|
||||
# | Advanced options |
|
||||
# +--------------------------------------+
|
||||
# Increase the `loop_task_stack_size` value for a large number of BMS
|
||||
# See https://github.com/Sleeper85/esphome-yambms/blob/main/documents/README/LOOP_TASK_STACK.md before changing
|
||||
loop_task_stack_size: "8192" # 8192 / 16384 / 32768 bytes
|
||||
|
||||
|
||||
|
||||
|
||||
@@ -1,4 +1,4 @@
|
||||
# Updated : 2026.07.15
|
||||
# Updated : 2026.07.30
|
||||
# Version : 1.7.1
|
||||
# GitHub : https://github.com/Sleeper85/esphome-yambms
|
||||
|
||||
@@ -145,6 +145,12 @@ substitutions:
|
||||
enable_led_logging: 'false' # Set to true to see if an led is assigned to a component correctly, logged every 60 seconds
|
||||
enable_health_logging: 'false' # Set to true to see if component health for all component instances, logged every 60 seconds
|
||||
# +--------------------------------------+
|
||||
# | Advanced options |
|
||||
# +--------------------------------------+
|
||||
# Increase the `loop_task_stack_size` value for a large number of BMS / entities
|
||||
# See https://github.com/Sleeper85/esphome-yambms/blob/main/documents/README/LOOP_TASK_STACK.md before changing
|
||||
loop_task_stack_size: "8192" # 8192 / 16384 / 32768 bytes
|
||||
# +--------------------------------------+
|
||||
# | UART expander WK2168 |
|
||||
# +--------------------------------------+
|
||||
uart0_baudrate: '2400' # uart_id : uart_${uart_hub_bus}_0 WKS {RJ45-UART0}
|
||||
|
||||
@@ -1,4 +1,4 @@
|
||||
# Updated : 2026.07.15
|
||||
# Updated : 2026.07.30
|
||||
# Version : 1.7.1
|
||||
# GitHub : https://github.com/Sleeper85/esphome-yambms
|
||||
|
||||
@@ -144,6 +144,12 @@ substitutions:
|
||||
# +--------------------------------------+
|
||||
enable_led_logging: 'false' # Set to true to see if an led is assigned to a component correctly, logged every 60 seconds
|
||||
enable_health_logging: 'false' # Set to true to see if component health for all component instances, logged every 60 seconds
|
||||
# +--------------------------------------+
|
||||
# | Advanced options |
|
||||
# +--------------------------------------+
|
||||
# Increase the `loop_task_stack_size` value for a large number of BMS
|
||||
# See https://github.com/Sleeper85/esphome-yambms/blob/main/documents/README/LOOP_TASK_STACK.md before changing
|
||||
loop_task_stack_size: "8192" # 8192 / 16384 / 32768 bytes
|
||||
|
||||
|
||||
|
||||
|
||||
@@ -1,4 +1,4 @@
|
||||
# Updated : 2026.07.15
|
||||
# Updated : 2026.07.30
|
||||
# Version : 1.7.1
|
||||
# GitHub : https://github.com/Sleeper85/esphome-yambms
|
||||
|
||||
@@ -144,6 +144,12 @@ substitutions:
|
||||
# +--------------------------------------+
|
||||
enable_led_logging: 'false' # Set to true to see if an led is assigned to a component correctly, logged every 60 seconds
|
||||
enable_health_logging: 'false' # Set to true to see if component health for all component instances, logged every 60 seconds
|
||||
# +--------------------------------------+
|
||||
# | Advanced options |
|
||||
# +--------------------------------------+
|
||||
# Increase the `loop_task_stack_size` value for a large number of BMS
|
||||
# See https://github.com/Sleeper85/esphome-yambms/blob/main/documents/README/LOOP_TASK_STACK.md before changing
|
||||
loop_task_stack_size: "8192" # 8192 / 16384 / 32768 bytes
|
||||
|
||||
|
||||
|
||||
|
||||
@@ -1,4 +1,4 @@
|
||||
# Updated : 2026.07.15
|
||||
# Updated : 2026.07.30
|
||||
# Version : 1.7.1
|
||||
# GitHub : https://github.com/Sleeper85/esphome-yambms
|
||||
|
||||
@@ -144,6 +144,12 @@ substitutions:
|
||||
# +--------------------------------------+
|
||||
enable_led_logging: 'false' # Set to true to see if an led is assigned to a component correctly, logged every 60 seconds
|
||||
enable_health_logging: 'false' # Set to true to see if component health for all component instances, logged every 60 seconds
|
||||
# +--------------------------------------+
|
||||
# | Advanced options |
|
||||
# +--------------------------------------+
|
||||
# Increase the `loop_task_stack_size` value for a large number of BMS
|
||||
# See https://github.com/Sleeper85/esphome-yambms/blob/main/documents/README/LOOP_TASK_STACK.md before changing
|
||||
loop_task_stack_size: "8192" # 8192 / 16384 / 32768 bytes
|
||||
|
||||
|
||||
|
||||
|
||||
@@ -1,4 +1,4 @@
|
||||
# Updated : 2026.07.15
|
||||
# Updated : 2026.07.30
|
||||
# Version : 1.7.1
|
||||
# GitHub : https://github.com/Sleeper85/esphome-yambms
|
||||
|
||||
@@ -144,6 +144,12 @@ substitutions:
|
||||
# +--------------------------------------+
|
||||
enable_led_logging: 'false' # Set to true to see if an led is assigned to a component correctly, logged every 60 seconds
|
||||
enable_health_logging: 'false' # Set to true to see if component health for all component instances, logged every 60 seconds
|
||||
# +--------------------------------------+
|
||||
# | Advanced options |
|
||||
# +--------------------------------------+
|
||||
# Increase the `loop_task_stack_size` value for a large number of BMS
|
||||
# See https://github.com/Sleeper85/esphome-yambms/blob/main/documents/README/LOOP_TASK_STACK.md before changing
|
||||
loop_task_stack_size: "8192" # 8192 / 16384 / 32768 bytes
|
||||
|
||||
|
||||
|
||||
|
||||
@@ -1,4 +1,4 @@
|
||||
# Updated : 2026.07.15
|
||||
# Updated : 2026.07.30
|
||||
# Version : 1.7.1
|
||||
# GitHub : https://github.com/Sleeper85/esphome-yambms
|
||||
|
||||
@@ -144,6 +144,12 @@ substitutions:
|
||||
# +--------------------------------------+
|
||||
enable_led_logging: 'false' # Set to true to see if an led is assigned to a component correctly, logged every 60 seconds
|
||||
enable_health_logging: 'false' # Set to true to see if component health for all component instances, logged every 60 seconds
|
||||
# +--------------------------------------+
|
||||
# | Advanced options |
|
||||
# +--------------------------------------+
|
||||
# Increase the `loop_task_stack_size` value for a large number of BMS
|
||||
# See https://github.com/Sleeper85/esphome-yambms/blob/main/documents/README/LOOP_TASK_STACK.md before changing
|
||||
loop_task_stack_size: "8192" # 8192 / 16384 / 32768 bytes
|
||||
|
||||
|
||||
|
||||
|
||||
@@ -1,4 +1,4 @@
|
||||
# Updated : 2026.07.15
|
||||
# Updated : 2026.07.30
|
||||
# Version : 1.7.1
|
||||
# GitHub : https://github.com/Sleeper85/esphome-yambms
|
||||
|
||||
@@ -144,6 +144,12 @@ substitutions:
|
||||
# +--------------------------------------+
|
||||
enable_led_logging: 'false' # Set to true to see if an led is assigned to a component correctly, logged every 60 seconds
|
||||
enable_health_logging: 'false' # Set to true to see if component health for all component instances, logged every 60 seconds
|
||||
# +--------------------------------------+
|
||||
# | Advanced options |
|
||||
# +--------------------------------------+
|
||||
# Increase the `loop_task_stack_size` value for a large number of BMS
|
||||
# See https://github.com/Sleeper85/esphome-yambms/blob/main/documents/README/LOOP_TASK_STACK.md before changing
|
||||
loop_task_stack_size: "8192" # 8192 / 16384 / 32768 bytes
|
||||
|
||||
|
||||
|
||||
|
||||
@@ -1,4 +1,4 @@
|
||||
# Updated : 2026.07.15
|
||||
# Updated : 2026.07.30
|
||||
# Version : 1.7.1
|
||||
# GitHub : https://github.com/Sleeper85/esphome-yambms
|
||||
|
||||
@@ -144,6 +144,12 @@ substitutions:
|
||||
# +--------------------------------------+
|
||||
enable_led_logging: 'false' # Set to true to see if an led is assigned to a component correctly, logged every 60 seconds
|
||||
enable_health_logging: 'false' # Set to true to see if component health for all component instances, logged every 60 seconds
|
||||
# +--------------------------------------+
|
||||
# | Advanced options |
|
||||
# +--------------------------------------+
|
||||
# Increase the `loop_task_stack_size` value for a large number of BMS
|
||||
# See https://github.com/Sleeper85/esphome-yambms/blob/main/documents/README/LOOP_TASK_STACK.md before changing
|
||||
loop_task_stack_size: "8192" # 8192 / 16384 / 32768 bytes
|
||||
|
||||
|
||||
|
||||
|
||||
@@ -1,4 +1,4 @@
|
||||
# Updated : 2026.07.15
|
||||
# Updated : 2026.07.30
|
||||
# Version : 1.7.1
|
||||
# GitHub : https://github.com/Sleeper85/esphome-yambms
|
||||
|
||||
@@ -144,6 +144,12 @@ substitutions:
|
||||
# +--------------------------------------+
|
||||
enable_led_logging: 'false' # Set to true to see if an led is assigned to a component correctly, logged every 60 seconds
|
||||
enable_health_logging: 'false' # Set to true to see if component health for all component instances, logged every 60 seconds
|
||||
# +--------------------------------------+
|
||||
# | Advanced options |
|
||||
# +--------------------------------------+
|
||||
# Increase the `loop_task_stack_size` value for a large number of BMS
|
||||
# See https://github.com/Sleeper85/esphome-yambms/blob/main/documents/README/LOOP_TASK_STACK.md before changing
|
||||
loop_task_stack_size: "8192" # 8192 / 16384 / 32768 bytes
|
||||
|
||||
|
||||
|
||||
|
||||
@@ -1,4 +1,4 @@
|
||||
# Updated : 2026.07.15
|
||||
# Updated : 2026.07.30
|
||||
# Version : 1.7.1
|
||||
# GitHub : https://github.com/Sleeper85/esphome-yambms
|
||||
|
||||
@@ -144,6 +144,12 @@ substitutions:
|
||||
# +--------------------------------------+
|
||||
enable_led_logging: 'false' # Set to true to see if an led is assigned to a component correctly, logged every 60 seconds
|
||||
enable_health_logging: 'false' # Set to true to see if component health for all component instances, logged every 60 seconds
|
||||
# +--------------------------------------+
|
||||
# | Advanced options |
|
||||
# +--------------------------------------+
|
||||
# Increase the `loop_task_stack_size` value for a large number of BMS
|
||||
# See https://github.com/Sleeper85/esphome-yambms/blob/main/documents/README/LOOP_TASK_STACK.md before changing
|
||||
loop_task_stack_size: "8192" # 8192 / 16384 / 32768 bytes
|
||||
|
||||
|
||||
|
||||
|
||||
@@ -1,4 +1,4 @@
|
||||
# Updated : 2026.07.15
|
||||
# Updated : 2026.07.30
|
||||
# Version : 1.7.1
|
||||
# GitHub : https://github.com/Sleeper85/esphome-yambms
|
||||
|
||||
@@ -144,6 +144,12 @@ substitutions:
|
||||
# +--------------------------------------+
|
||||
enable_led_logging: 'false' # Set to true to see if an led is assigned to a component correctly, logged every 60 seconds
|
||||
enable_health_logging: 'false' # Set to true to see if component health for all component instances, logged every 60 seconds
|
||||
# +--------------------------------------+
|
||||
# | Advanced options |
|
||||
# +--------------------------------------+
|
||||
# Increase the `loop_task_stack_size` value for a large number of BMS
|
||||
# See https://github.com/Sleeper85/esphome-yambms/blob/main/documents/README/LOOP_TASK_STACK.md before changing
|
||||
loop_task_stack_size: "8192" # 8192 / 16384 / 32768 bytes
|
||||
|
||||
|
||||
|
||||
|
||||
@@ -1,4 +1,4 @@
|
||||
# Updated : 2026.07.15
|
||||
# Updated : 2026.07.30
|
||||
# Version : 1.7.1
|
||||
# GitHub : https://github.com/Sleeper85/esphome-yambms
|
||||
|
||||
@@ -144,6 +144,12 @@ substitutions:
|
||||
# +--------------------------------------+
|
||||
enable_led_logging: 'false' # Set to true to see if an led is assigned to a component correctly, logged every 60 seconds
|
||||
enable_health_logging: 'false' # Set to true to see if component health for all component instances, logged every 60 seconds
|
||||
# +--------------------------------------+
|
||||
# | Advanced options |
|
||||
# +--------------------------------------+
|
||||
# Increase the `loop_task_stack_size` value for a large number of BMS
|
||||
# See https://github.com/Sleeper85/esphome-yambms/blob/main/documents/README/LOOP_TASK_STACK.md before changing
|
||||
loop_task_stack_size: "8192" # 8192 / 16384 / 32768 bytes
|
||||
|
||||
|
||||
|
||||
|
||||
@@ -1,4 +1,4 @@
|
||||
# Updated : 2026.07.15
|
||||
# Updated : 2026.07.30
|
||||
# Version : 1.7.1
|
||||
# GitHub : https://github.com/Sleeper85/esphome-yambms
|
||||
|
||||
@@ -144,6 +144,12 @@ substitutions:
|
||||
# +--------------------------------------+
|
||||
enable_led_logging: 'false' # Set to true to see if an led is assigned to a component correctly, logged every 60 seconds
|
||||
enable_health_logging: 'false' # Set to true to see if component health for all component instances, logged every 60 seconds
|
||||
# +--------------------------------------+
|
||||
# | Advanced options |
|
||||
# +--------------------------------------+
|
||||
# Increase the `loop_task_stack_size` value for a large number of BMS
|
||||
# See https://github.com/Sleeper85/esphome-yambms/blob/main/documents/README/LOOP_TASK_STACK.md before changing
|
||||
loop_task_stack_size: "8192" # 8192 / 16384 / 32768 bytes
|
||||
|
||||
|
||||
|
||||
|
||||
@@ -1,4 +1,4 @@
|
||||
# Updated : 2026.07.15
|
||||
# Updated : 2026.07.30
|
||||
# Version : 1.7.1
|
||||
# GitHub : https://github.com/Sleeper85/esphome-yambms
|
||||
|
||||
@@ -144,6 +144,12 @@ substitutions:
|
||||
# +--------------------------------------+
|
||||
enable_led_logging: 'false' # Set to true to see if an led is assigned to a component correctly, logged every 60 seconds
|
||||
enable_health_logging: 'false' # Set to true to see if component health for all component instances, logged every 60 seconds
|
||||
# +--------------------------------------+
|
||||
# | Advanced options |
|
||||
# +--------------------------------------+
|
||||
# Increase the `loop_task_stack_size` value for a large number of BMS
|
||||
# See https://github.com/Sleeper85/esphome-yambms/blob/main/documents/README/LOOP_TASK_STACK.md before changing
|
||||
loop_task_stack_size: "8192" # 8192 / 16384 / 32768 bytes
|
||||
|
||||
|
||||
|
||||
|
||||
@@ -1,4 +1,4 @@
|
||||
# Updated : 2026.07.15
|
||||
# Updated : 2026.07.30
|
||||
# Version : 1.7.1
|
||||
# GitHub : https://github.com/Sleeper85/esphome-yambms
|
||||
|
||||
@@ -144,6 +144,12 @@ substitutions:
|
||||
# +--------------------------------------+
|
||||
enable_led_logging: 'false' # Set to true to see if an led is assigned to a component correctly, logged every 60 seconds
|
||||
enable_health_logging: 'false' # Set to true to see if component health for all component instances, logged every 60 seconds
|
||||
# +--------------------------------------+
|
||||
# | Advanced options |
|
||||
# +--------------------------------------+
|
||||
# Increase the `loop_task_stack_size` value for a large number of BMS
|
||||
# See https://github.com/Sleeper85/esphome-yambms/blob/main/documents/README/LOOP_TASK_STACK.md before changing
|
||||
loop_task_stack_size: "8192" # 8192 / 16384 / 32768 bytes
|
||||
|
||||
|
||||
|
||||
|
||||
+7
-1
@@ -1,4 +1,4 @@
|
||||
# Updated : 2026.07.15
|
||||
# Updated : 2026.07.30
|
||||
# Version : 1.7.1
|
||||
# GitHub : https://github.com/Sleeper85/esphome-yambms
|
||||
|
||||
@@ -144,6 +144,12 @@ substitutions:
|
||||
# +--------------------------------------+
|
||||
enable_led_logging: 'false' # Set to true to see if an led is assigned to a component correctly, logged every 60 seconds
|
||||
enable_health_logging: 'false' # Set to true to see if component health for all component instances, logged every 60 seconds
|
||||
# +--------------------------------------+
|
||||
# | Advanced options |
|
||||
# +--------------------------------------+
|
||||
# Increase the `loop_task_stack_size` value for a large number of BMS
|
||||
# See https://github.com/Sleeper85/esphome-yambms/blob/main/documents/README/LOOP_TASK_STACK.md before changing
|
||||
loop_task_stack_size: "8192" # 8192 / 16384 / 32768 bytes
|
||||
|
||||
|
||||
|
||||
|
||||
@@ -1,4 +1,4 @@
|
||||
# Updated : 2026.07.15
|
||||
# Updated : 2026.07.30
|
||||
# Version : 1.7.1
|
||||
# GitHub : https://github.com/Sleeper85/esphome-yambms
|
||||
|
||||
@@ -144,6 +144,12 @@ substitutions:
|
||||
# +--------------------------------------+
|
||||
enable_led_logging: 'false' # Set to true to see if an led is assigned to a component correctly, logged every 60 seconds
|
||||
enable_health_logging: 'false' # Set to true to see if component health for all component instances, logged every 60 seconds
|
||||
# +--------------------------------------+
|
||||
# | Advanced options |
|
||||
# +--------------------------------------+
|
||||
# Increase the `loop_task_stack_size` value for a large number of BMS
|
||||
# See https://github.com/Sleeper85/esphome-yambms/blob/main/documents/README/LOOP_TASK_STACK.md before changing
|
||||
loop_task_stack_size: "8192" # 8192 / 16384 / 32768 bytes
|
||||
|
||||
|
||||
|
||||
|
||||
@@ -1,5 +1,5 @@
|
||||
# Updated : 2026.06.29
|
||||
# Version : 1.7.0
|
||||
# Updated : 2026.07.30
|
||||
# Version : 1.7.1
|
||||
# GitHub : https://github.com/Sleeper85/esphome-yambms
|
||||
|
||||
# YamBMS ( Yet another multi-BMS Merging Solution )
|
||||
@@ -54,6 +54,12 @@ substitutions:
|
||||
# This allows to group entities into logical devices that appear separately in Home Assistant.
|
||||
hostname: 'yambms-display' # Name of your ESPHome node registered on the IP network (DNS name must be unique)
|
||||
friendly_name : 'YamBMS Display' # Name of your board (prefix for board entities)
|
||||
# +--------------------------------------+
|
||||
# | Advanced options |
|
||||
# +--------------------------------------+
|
||||
# Increase the `loop_task_stack_size` value for a large number of entities
|
||||
# See https://github.com/Sleeper85/esphome-yambms/blob/main/documents/README/LOOP_TASK_STACK.md before changing
|
||||
loop_task_stack_size: "8192" # 8192 / 16384 / 32768 bytes
|
||||
|
||||
# +--------------------------------------+
|
||||
# | Packages |
|
||||
|
||||
@@ -1,4 +1,4 @@
|
||||
# Updated : 2026.07.15
|
||||
# Updated : 2026.07.30
|
||||
# Version : 1.7.1
|
||||
# GitHub : https://github.com/Sleeper85/esphome-yambms
|
||||
|
||||
@@ -145,6 +145,12 @@ substitutions:
|
||||
enable_led_logging: 'false' # Set to true to see if an led is assigned to a component correctly, logged every 60 seconds
|
||||
enable_health_logging: 'false' # Set to true to see if component health for all component instances, logged every 60 seconds
|
||||
# +--------------------------------------+
|
||||
# | Advanced options |
|
||||
# +--------------------------------------+
|
||||
# Increase the `loop_task_stack_size` value for a large number of BMS / entities
|
||||
# See https://github.com/Sleeper85/esphome-yambms/blob/main/documents/README/LOOP_TASK_STACK.md before changing
|
||||
loop_task_stack_size: "8192" # 8192 / 16384 / 32768 bytes
|
||||
# +--------------------------------------+
|
||||
# | UART expander WK2168 |
|
||||
# +--------------------------------------+
|
||||
uart0_baudrate: '2400' # uart_id : uart_${uart_hub_bus}_0 WKS {RJ45-UART0}
|
||||
|
||||
@@ -1,4 +1,4 @@
|
||||
# Updated : 2026.07.15
|
||||
# Updated : 2026.07.30
|
||||
# Version : 1.7.1
|
||||
# GitHub : https://github.com/Sleeper85/esphome-yambms
|
||||
|
||||
@@ -144,6 +144,12 @@ substitutions:
|
||||
# +--------------------------------------+
|
||||
enable_led_logging: 'false' # Set to true to see if an led is assigned to a component correctly, logged every 60 seconds
|
||||
enable_health_logging: 'false' # Set to true to see if component health for all component instances, logged every 60 seconds
|
||||
# +--------------------------------------+
|
||||
# | Advanced options |
|
||||
# +--------------------------------------+
|
||||
# Increase the `loop_task_stack_size` value for a large number of BMS
|
||||
# See https://github.com/Sleeper85/esphome-yambms/blob/main/documents/README/LOOP_TASK_STACK.md before changing
|
||||
loop_task_stack_size: "8192" # 8192 / 16384 / 32768 bytes
|
||||
|
||||
|
||||
|
||||
|
||||
@@ -1,4 +1,4 @@
|
||||
# Updated : 2026.07.15
|
||||
# Updated : 2026.07.30
|
||||
# Version : 1.7.1
|
||||
# GitHub : https://github.com/Sleeper85/esphome-yambms
|
||||
|
||||
@@ -144,6 +144,12 @@ substitutions:
|
||||
# +--------------------------------------+
|
||||
enable_led_logging: 'false' # Set to true to see if an led is assigned to a component correctly, logged every 60 seconds
|
||||
enable_health_logging: 'false' # Set to true to see if component health for all component instances, logged every 60 seconds
|
||||
# +--------------------------------------+
|
||||
# | Advanced options |
|
||||
# +--------------------------------------+
|
||||
# Increase the `loop_task_stack_size` value for a large number of BMS
|
||||
# See https://github.com/Sleeper85/esphome-yambms/blob/main/documents/README/LOOP_TASK_STACK.md before changing
|
||||
loop_task_stack_size: "8192" # 8192 / 16384 / 32768 bytes
|
||||
|
||||
|
||||
|
||||
|
||||
@@ -0,0 +1,174 @@
|
||||
# YamBMS - loop_task_stack_size
|
||||
|
||||
[](https://www.gnu.org/licenses/gpl-3.0)
|
||||
[](https://github.com/Sleeper85/esphome-yambms/releases/latest)
|
||||

|
||||

|
||||

|
||||
|
||||
Reference for the `loop_task_stack_size` option. Read this before changing it.
|
||||
|
||||
This document covers **raising** the value. Lowering it below the ESPHome
|
||||
default is not documented here and is not recommended: the gain is a few
|
||||
kilobytes, and the failure mode is a rare crash on a code path you did not test.
|
||||
|
||||
## Stack and heap in one minute
|
||||
|
||||
An ESP32 stores data in two very different ways, and both come out of the same
|
||||
pool of internal RAM.
|
||||
|
||||
| | Stack | Heap |
|
||||
|---|---|---|
|
||||
| What it is | Scratch space for the function currently running | A reserve the program borrows from on demand |
|
||||
| Reserved when | At compile time, one fixed block per task | At runtime, piece by piece |
|
||||
| Holds | Local variables, return addresses | Objects whose count is not known in advance |
|
||||
| In YamBMS | The local variables of `setup()` | Every sensor object, every API connection, every network buffer |
|
||||
| Runs out how | Silently overwrites neighbouring memory | `malloc()` returns null |
|
||||
|
||||
The **stack** is a fixed-size block. ESPHome runs `setup()` and the main loop
|
||||
inside a FreeRTOS task called `loopTask`, whose stack defaults to 8192 bytes.
|
||||
That block is reserved at compile time and never grows.
|
||||
|
||||
The **heap** is everything left over. When YamBMS creates 1,400 sensor objects
|
||||
at boot, they come from the heap. On a board with PSRAM, most of them end up in
|
||||
PSRAM rather than internal RAM.
|
||||
|
||||
Raising `loop_task_stack_size` enlarges the stack block, which takes internal
|
||||
RAM away from the heap — byte for byte, nothing else changes.
|
||||
|
||||
## Why the default is sometimes not enough
|
||||
|
||||
ESPHome generates `setup()` as a single flat function. Every entity
|
||||
registration adds local variables to the same stack frame, so the frame grows
|
||||
in direct proportion to the number of entities.
|
||||
|
||||
Measured on YamBMS with **YamBMS RS485 BMS (bms_combine_modbus_client.yaml)** packages:
|
||||
|
||||
```
|
||||
setup() frame = 784 + 400 x nb_BMS bytes
|
||||
|
||||
12 BMS -> 5,584 B ~2,350 B left for everything else -> boots
|
||||
16 BMS -> 7,184 B ~760 B left for everything else -> boot loop
|
||||
```
|
||||
|
||||
That frame stays alive while `App.setup()` initialises every component, so the
|
||||
remaining bytes must also cover component init, NVS reads, log formatting and
|
||||
CPU register spills. When they do not fit, the overflow writes past the end of
|
||||
the stack and corrupts whatever sits next to it in memory.
|
||||
|
||||
### Symptoms
|
||||
|
||||
- Boot loops that start only after adding BMS or entities, with no hard
|
||||
threshold — it scales with config size.
|
||||
- `Guru Meditation Error` whose **type changes between reboots**: sometimes
|
||||
`LoadProhibited`, sometimes an Interrupt WDT, sometimes a cache error.
|
||||
- No stack overflow message. The FreeRTOS canary is often skipped entirely by
|
||||
a large stack frame, so nothing warns you.
|
||||
- Adjusting PSRAM options changes nothing, because the stack is not in PSRAM.
|
||||
|
||||
If a boot loop produces **no ESPHome log output at all** and a constant
|
||||
`abort()`, that is a different problem — the board ran out of internal RAM
|
||||
before startup. Lower the value rather than raising it, and reduce the config.
|
||||
|
||||
## Recommended values
|
||||
|
||||
| BMS per node | `loop_task_stack_size` |
|
||||
|---|---|
|
||||
| up to 6 | `8192` (ESPHome default — leave unset) |
|
||||
| 7 to 24 | `16384` |
|
||||
| 25 to 64 | `32768` (maximum accepted value) |
|
||||
|
||||
Values include roughly 4 KB of reserve above the measured `setup()` frame.
|
||||
|
||||
**These values are for YamBMS RS485 BMS (bms_combine_modbus_client.yaml).** BLE BMS instantiate
|
||||
`esp32_ble_tracker` and one `ble_client` per BMS, which gives a different fixed
|
||||
cost and a different slope. The model above has not been calibrated for them.
|
||||
|
||||
**The 16384 and 32768 rows assume a board with PSRAM.** Not because the stack
|
||||
needs PSRAM — it never lives there — but because a config large enough to need
|
||||
them will run out of heap long before it runs out of stack. On a board without
|
||||
PSRAM, keep `8192` unless you have a measured reason not to.
|
||||
|
||||
## How to apply it
|
||||
|
||||
The value belongs in your main configuration, not in a board or PSRAM package:
|
||||
it depends on how many BMS you configured, not on your hardware.
|
||||
|
||||
```yaml
|
||||
substitutions:
|
||||
loop_task_stack_size: "8192" # see LOOP_TASK_STACK.md before changing
|
||||
|
||||
esp32:
|
||||
framework:
|
||||
advanced:
|
||||
loop_task_stack_size: ${loop_task_stack_size}
|
||||
```
|
||||
|
||||
## Check the cost before flashing
|
||||
|
||||
Raising this value consumes internal RAM permanently. The size report at the end
|
||||
of every compile tells you the cost, with no hardware required:
|
||||
|
||||
```
|
||||
RAM: [====== ] 59.2% (used 202299 bytes from 341760 bytes)
|
||||
```
|
||||
|
||||
Recompile after changing the value and compare. Going from `8192` to `16384`
|
||||
should increase the used figure by exactly 8,192 bytes; `8192` to `32768` by
|
||||
24,576. Anything else means something unexpected happened.
|
||||
|
||||
Leave yourself comfortable margin on the free figure. If free internal RAM drops
|
||||
low, you trade a boot-time crash for runtime symptoms instead: API
|
||||
disconnections, WiFi failing to reconnect, entities failing to initialise.
|
||||
|
||||
To confirm the value actually reached the firmware:
|
||||
|
||||
```bash
|
||||
NM=$(find ~/.cache/esphome/idf/tools -name '*-elf-nm' | head -1)
|
||||
$NM -SC .esphome/build/<node>/build/<node>.elf | grep loop_task_stack
|
||||
```
|
||||
|
||||
The second column is the size in hex: `00002000` = 8192, `00004000` = 16384,
|
||||
`00008000` = 32768.
|
||||
|
||||
## Confirm on hardware
|
||||
|
||||
The size report proves the cost. Only a running device proves the value is
|
||||
sufficient. Add this temporarily and read the log after boot:
|
||||
|
||||
```yaml
|
||||
esphome:
|
||||
on_boot:
|
||||
priority: -100.0
|
||||
then:
|
||||
- lambda: 'ESP_LOGW("mem", "loopTask HWM=%u B", uxTaskGetStackHighWaterMark(nullptr));'
|
||||
```
|
||||
|
||||
`HWM` is the smallest amount of stack that was still free — the remaining
|
||||
margin, in bytes. Below about 2,000, go up one step in the table.
|
||||
|
||||
Note that `loopTask` also runs the main loop forever, not just `setup()`. Rare
|
||||
paths such as an OTA update, an API reconnection or verbose logging can push
|
||||
deeper than boot does, so keep margin rather than tuning to the exact boot
|
||||
figure.
|
||||
|
||||
## Calibrating for a different node type
|
||||
|
||||
If your node is not a standard **YamBMS RS485 BMS (bms_combine_modbus_client.yaml)** setup, measure your own frame
|
||||
size instead of using the table. Add this and compile twice with a different
|
||||
number of BMS:
|
||||
|
||||
```yaml
|
||||
esphome:
|
||||
build_flags:
|
||||
- "-Wframe-larger-than=4096"
|
||||
```
|
||||
|
||||
The compiler prints the frame size directly:
|
||||
|
||||
```
|
||||
warning: the frame size of 7184 bytes is larger than 4096 bytes
|
||||
```
|
||||
|
||||
Two data points give you the fixed cost and the cost per BMS. Add about 4 KB of
|
||||
reserve and round up to the next step.
|
||||
@@ -1,5 +1,5 @@
|
||||
# Updated : 2026.02.15
|
||||
# Version : 1.3.3
|
||||
# Updated : 2026.07.30
|
||||
# Version : 1.3.4
|
||||
# GitHub : https://github.com/Sleeper85/esphome-yambms
|
||||
|
||||
# YamBMS ( Yet another multi-BMS Merging Solution )
|
||||
@@ -42,6 +42,8 @@ substitutions:
|
||||
talk_pin: '10' # ESP32: 4, ESP32-S3: 8, ESP32-C3: 10
|
||||
# LED
|
||||
board_has_rgb: "true" # LED `RGB` flag to show functionality is available
|
||||
# LOOP_TASK_STACK
|
||||
loop_task_stack_size: "8192" # see LOOP_TASK_STACK.md before changing
|
||||
|
||||
packages:
|
||||
device_base: !include ../base/device_base.yaml
|
||||
@@ -53,6 +55,8 @@ esp32:
|
||||
flash_size: 4MB # ajust according to your ESP32-C3 version
|
||||
framework:
|
||||
type: esp-idf
|
||||
advanced:
|
||||
loop_task_stack_size: ${loop_task_stack_size}
|
||||
|
||||
esphome:
|
||||
platformio_options:
|
||||
|
||||
@@ -1,5 +1,5 @@
|
||||
# Updated : 2026.02.15
|
||||
# Version : 1.3.4
|
||||
# Updated : 2026.07.30
|
||||
# Version : 1.3.5
|
||||
# GitHub : https://github.com/Sleeper85/esphome-yambms
|
||||
|
||||
# YamBMS ( Yet another multi-BMS Merging Solution )
|
||||
@@ -30,6 +30,8 @@ substitutions:
|
||||
# canbus_esp32_can
|
||||
tx_pin_4: '19'
|
||||
rx_pin_4: '18'
|
||||
# LOOP_TASK_STACK
|
||||
loop_task_stack_size: "8192" # see LOOP_TASK_STACK.md before changing
|
||||
|
||||
packages:
|
||||
device_base: !include ../base/device_base.yaml
|
||||
@@ -38,10 +40,10 @@ packages:
|
||||
|
||||
esp32:
|
||||
variant: esp32c3
|
||||
# flash_size: 2MB
|
||||
framework:
|
||||
type: esp-idf
|
||||
# version: latest
|
||||
advanced:
|
||||
loop_task_stack_size: ${loop_task_stack_size}
|
||||
|
||||
esphome:
|
||||
platformio_options:
|
||||
|
||||
@@ -1,5 +1,5 @@
|
||||
# Updated : 2026.02.15
|
||||
# Version : 1.1.5
|
||||
# Updated : 2026.07.30
|
||||
# Version : 1.1.6
|
||||
# GitHub : https://github.com/Sleeper85/esphome-yambms
|
||||
|
||||
# YamBMS ( Yet another multi-BMS Merging Solution )
|
||||
@@ -42,6 +42,8 @@ substitutions:
|
||||
mcp2515_cs_pin: '5'
|
||||
# LED
|
||||
board_has_rgb: "true" # LED `RGB` flag to show functionality is available
|
||||
# LOOP_TASK_STACK
|
||||
loop_task_stack_size: "8192" # see LOOP_TASK_STACK.md before changing
|
||||
|
||||
packages:
|
||||
device_base: !include ../base/device_base.yaml
|
||||
@@ -53,6 +55,8 @@ esp32:
|
||||
flash_size: 4MB # ajust according to your ESP32-C3 version
|
||||
framework:
|
||||
type: esp-idf
|
||||
advanced:
|
||||
loop_task_stack_size: ${loop_task_stack_size}
|
||||
|
||||
esphome:
|
||||
platformio_options:
|
||||
|
||||
@@ -1,5 +1,5 @@
|
||||
# Updated : 2026.06.28
|
||||
# Version : 1.1.3
|
||||
# Updated : 2026.07.30
|
||||
# Version : 1.1.4
|
||||
# GitHub : https://github.com/Sleeper85/esphome-yambms
|
||||
|
||||
# YamBMS ( Yet another multi-BMS Merging Solution )
|
||||
@@ -74,6 +74,8 @@ substitutions:
|
||||
rx_pin_2: '38'
|
||||
# talk_pin for RS485 flow control (directly wired on COMMU module, optional GPIO)
|
||||
talk_pin: '48'
|
||||
# LOOP_TASK_STACK
|
||||
loop_task_stack_size: "8192" # see LOOP_TASK_STACK.md before changing
|
||||
|
||||
packages:
|
||||
device_base: !include ../base/device_base.yaml
|
||||
@@ -86,6 +88,7 @@ esp32:
|
||||
framework:
|
||||
type: esp-idf
|
||||
advanced:
|
||||
loop_task_stack_size: ${loop_task_stack_size}
|
||||
enable_idf_experimental_features: true
|
||||
|
||||
# WiFi via ESP32-C6 co-processor
|
||||
|
||||
@@ -1,5 +1,5 @@
|
||||
# Updated : 2026.02.15
|
||||
# Version : 1.3.6
|
||||
# Updated : 2026.07.30
|
||||
# Version : 1.3.7
|
||||
# GitHub : https://github.com/Sleeper85/esphome-yambms
|
||||
|
||||
# YamBMS ( Yet another multi-BMS Merging Solution )
|
||||
@@ -45,6 +45,8 @@ substitutions:
|
||||
talk_pin: '8'
|
||||
# LED
|
||||
board_has_rgb: "true" # LED `RGB` flag to show functionality is available
|
||||
# LOOP_TASK_STACK
|
||||
loop_task_stack_size: "8192" # see LOOP_TASK_STACK.md before changing
|
||||
|
||||
packages:
|
||||
device_base: !include ../base/device_base.yaml
|
||||
@@ -56,6 +58,8 @@ esp32:
|
||||
cpu_frequency: 240MHz
|
||||
framework:
|
||||
type: esp-idf
|
||||
advanced:
|
||||
loop_task_stack_size: ${loop_task_stack_size}
|
||||
|
||||
esphome:
|
||||
platformio_options:
|
||||
|
||||
@@ -1,5 +1,5 @@
|
||||
# Updated : 2026.06.29
|
||||
# Version : 1.3.9
|
||||
# Updated : 2026.07.30
|
||||
# Version : 1.4.0
|
||||
# GitHub : https://github.com/Sleeper85/esphome-yambms
|
||||
|
||||
# YamBMS ( Yet another multi-BMS Merging Solution )
|
||||
@@ -44,6 +44,8 @@ substitutions:
|
||||
mcp2515_cs_pin: '39'
|
||||
# talk_pin
|
||||
talk_pin: '8'
|
||||
# LOOP_TASK_STACK
|
||||
loop_task_stack_size: "8192" # see LOOP_TASK_STACK.md before changing
|
||||
|
||||
packages:
|
||||
device_base: !include ../base/device_base.yaml
|
||||
@@ -55,6 +57,8 @@ esp32:
|
||||
cpu_frequency: 240MHz
|
||||
framework:
|
||||
type: esp-idf
|
||||
advanced:
|
||||
loop_task_stack_size: ${loop_task_stack_size}
|
||||
|
||||
esphome:
|
||||
platformio_options:
|
||||
|
||||
@@ -1,5 +1,5 @@
|
||||
# Updated : 2026.06.29
|
||||
# Version : 1.4.0
|
||||
# Updated : 2026.07.30
|
||||
# Version : 1.4.1
|
||||
# GitHub : https://github.com/Sleeper85/esphome-yambms
|
||||
|
||||
# YamBMS ( Yet another multi-BMS Merging Solution )
|
||||
@@ -44,6 +44,8 @@ substitutions:
|
||||
mcp2515_cs_pin: '39'
|
||||
# talk_pin
|
||||
talk_pin: '8'
|
||||
# LOOP_TASK_STACK
|
||||
loop_task_stack_size: "8192" # see LOOP_TASK_STACK.md before changing
|
||||
|
||||
packages:
|
||||
device_base: !include ../base/device_base.yaml
|
||||
@@ -57,6 +59,8 @@ esp32:
|
||||
cpu_frequency: 240MHz
|
||||
framework:
|
||||
type: esp-idf
|
||||
advanced:
|
||||
loop_task_stack_size: ${loop_task_stack_size}
|
||||
|
||||
esphome:
|
||||
platformio_options:
|
||||
|
||||
@@ -1,5 +1,5 @@
|
||||
# Updated : 2026.02.15
|
||||
# Version : 1.3.3
|
||||
# Updated : 2026.07.30
|
||||
# Version : 1.3.4
|
||||
# GitHub : https://github.com/Sleeper85/esphome-yambms
|
||||
|
||||
# YamBMS ( Yet another multi-BMS Merging Solution )
|
||||
@@ -42,6 +42,8 @@ substitutions:
|
||||
talk_pin: '8' # ESP32: 4, ESP32-S3: 8, ESP32-C3: 10
|
||||
# LED
|
||||
board_has_rgb: "true" # LED `RGB` flag to show functionality is available
|
||||
# LOOP_TASK_STACK
|
||||
loop_task_stack_size: "8192" # see LOOP_TASK_STACK.md before changing
|
||||
|
||||
packages:
|
||||
device_base: !include ../base/device_base.yaml
|
||||
@@ -54,6 +56,8 @@ esp32:
|
||||
cpu_frequency: 240MHz
|
||||
framework:
|
||||
type: esp-idf
|
||||
advanced:
|
||||
loop_task_stack_size: ${loop_task_stack_size}
|
||||
|
||||
esphome:
|
||||
platformio_options:
|
||||
|
||||
@@ -1,5 +1,5 @@
|
||||
# Updated : 2026.02.15
|
||||
# Version : 1.3.5
|
||||
# Updated : 2026.07.30
|
||||
# Version : 1.3.6
|
||||
# GitHub : https://github.com/Sleeper85/esphome-yambms
|
||||
|
||||
# YamBMS ( Yet another multi-BMS Merging Solution )
|
||||
@@ -42,6 +42,8 @@ substitutions:
|
||||
talk_pin: '8' # ESP32: 4, ESP32-S3: 8, ESP32-C3: 10
|
||||
# LED
|
||||
board_has_rgb: "true" # LED `RGB` flag to show functionality is available
|
||||
# LOOP_TASK_STACK
|
||||
loop_task_stack_size: "8192" # see LOOP_TASK_STACK.md before changing
|
||||
|
||||
packages:
|
||||
device_base: !include ../base/device_base.yaml
|
||||
@@ -54,6 +56,8 @@ esp32:
|
||||
cpu_frequency: 240MHz
|
||||
framework:
|
||||
type: esp-idf
|
||||
advanced:
|
||||
loop_task_stack_size: ${loop_task_stack_size}
|
||||
|
||||
esphome:
|
||||
platformio_options:
|
||||
|
||||
@@ -1,5 +1,5 @@
|
||||
# Updated : 2026.02.15
|
||||
# Version : 1.3.6
|
||||
# Updated : 2026.07.30
|
||||
# Version : 1.3.7
|
||||
# GitHub : https://github.com/SeByDocKy/pvbrain2
|
||||
|
||||
substitutions:
|
||||
@@ -39,6 +39,8 @@ substitutions:
|
||||
one_wire_pin: '47'
|
||||
# LED
|
||||
board_has_rgb: "true" # LED `RGB` flag to show functionality is available
|
||||
# LOOP_TASK_STACK
|
||||
loop_task_stack_size: "8192" # see LOOP_TASK_STACK.md before changing
|
||||
|
||||
packages:
|
||||
device_base: !include ../base/device_base.yaml
|
||||
@@ -51,6 +53,8 @@ esp32:
|
||||
cpu_frequency: 240MHz
|
||||
framework:
|
||||
type: esp-idf
|
||||
advanced:
|
||||
loop_task_stack_size: ${loop_task_stack_size}
|
||||
|
||||
esphome:
|
||||
platformio_options:
|
||||
|
||||
@@ -1,5 +1,5 @@
|
||||
# Updated : 2026.02.15
|
||||
# Version : 1.1.4
|
||||
# Updated : 2026.07.30
|
||||
# Version : 1.1.5
|
||||
# GitHub : https://github.com/Sleeper85/esphome-yambms
|
||||
|
||||
# YamBMS ( Yet another multi-BMS Merging Solution )
|
||||
@@ -44,6 +44,8 @@ substitutions:
|
||||
talk_pin: '8' # ESP32: 4, ESP32-S3: 8, ESP32-C3: 10
|
||||
# LED
|
||||
board_has_rgb: "true" # LED `RGB` flag to show functionality is available
|
||||
# LOOP_TASK_STACK
|
||||
loop_task_stack_size: "8192" # see LOOP_TASK_STACK.md before changing
|
||||
|
||||
packages:
|
||||
device_base: !include ../base/device_base.yaml
|
||||
@@ -56,6 +58,8 @@ esp32:
|
||||
cpu_frequency: 240MHz
|
||||
framework:
|
||||
type: esp-idf
|
||||
advanced:
|
||||
loop_task_stack_size: ${loop_task_stack_size}
|
||||
|
||||
esphome:
|
||||
platformio_options:
|
||||
|
||||
@@ -1,5 +1,5 @@
|
||||
# Updated : 2026.02.15
|
||||
# Version : 1.1.1
|
||||
# Updated : 2026.07.30
|
||||
# Version : 1.1.2
|
||||
# GitHub : https://github.com/Sleeper85/esphome-yambms
|
||||
|
||||
# YamBMS ( Yet another multi-BMS Merging Solution )
|
||||
@@ -45,6 +45,8 @@ substitutions:
|
||||
# LED
|
||||
led_pin: '48' # ajust according to your board model
|
||||
board_has_rgb: "true" # LED `RGB` flag to show functionality is available
|
||||
# LOOP_TASK_STACK
|
||||
loop_task_stack_size: "8192" # see LOOP_TASK_STACK.md before changing
|
||||
|
||||
packages:
|
||||
device_base: !include ../base/device_base.yaml
|
||||
@@ -57,6 +59,8 @@ esp32:
|
||||
cpu_frequency: 240MHz
|
||||
framework:
|
||||
type: esp-idf
|
||||
advanced:
|
||||
loop_task_stack_size: ${loop_task_stack_size}
|
||||
|
||||
esphome:
|
||||
platformio_options:
|
||||
|
||||
@@ -1,5 +1,5 @@
|
||||
# Updated : 2026.07.10
|
||||
# Version : 1.1.2
|
||||
# Updated : 2026.07.30
|
||||
# Version : 1.1.3
|
||||
# GitHub : https://github.com/Sleeper85/esphome-yambms
|
||||
|
||||
# YamBMS ( Yet another multi-BMS Merging Solution )
|
||||
@@ -45,6 +45,8 @@ substitutions:
|
||||
lilygo_btn_b: '40'
|
||||
# relay
|
||||
lilygo_rly: '8'
|
||||
# LOOP_TASK_STACK
|
||||
loop_task_stack_size: "8192" # see LOOP_TASK_STACK.md before changing
|
||||
|
||||
packages:
|
||||
device_base: !include ../base/device_base.yaml
|
||||
@@ -57,6 +59,8 @@ esp32:
|
||||
cpu_frequency: 240MHz
|
||||
framework:
|
||||
type: esp-idf
|
||||
advanced:
|
||||
loop_task_stack_size: ${loop_task_stack_size}
|
||||
|
||||
esphome:
|
||||
platformio_options:
|
||||
|
||||
@@ -1,5 +1,5 @@
|
||||
# Updated : 2026.07.10
|
||||
# Version : 1.1.9
|
||||
# Updated : 2026.07.30
|
||||
# Version : 1.2.0
|
||||
# GitHub : https://github.com/Sleeper85/esphome-yambms
|
||||
|
||||
# YamBMS ( Yet another multi-BMS Merging Solution )
|
||||
@@ -34,6 +34,8 @@ substitutions:
|
||||
# canbus_esp32_can: CAN
|
||||
tx_pin_4: '6'
|
||||
rx_pin_4: '7'
|
||||
# LOOP_TASK_STACK
|
||||
loop_task_stack_size: "8192" # see LOOP_TASK_STACK.md before changing
|
||||
|
||||
packages:
|
||||
device_base: !include ../base/device_base.yaml
|
||||
@@ -47,6 +49,8 @@ esp32:
|
||||
cpu_frequency: 240MHz
|
||||
framework:
|
||||
type: esp-idf
|
||||
advanced:
|
||||
loop_task_stack_size: ${loop_task_stack_size}
|
||||
|
||||
esphome:
|
||||
platformio_options:
|
||||
|
||||
@@ -1,5 +1,5 @@
|
||||
# Updated : 2026.07.10
|
||||
# Version : 1.2.0
|
||||
# Updated : 2026.07.30
|
||||
# Version : 1.2.1
|
||||
# GitHub : https://github.com/Sleeper85/esphome-yambms
|
||||
|
||||
# YamBMS ( Yet another multi-BMS Merging Solution )
|
||||
@@ -47,6 +47,8 @@ substitutions:
|
||||
mcp2515_cs_pin: "14"
|
||||
# LED
|
||||
board_has_rgb: "true" # LED `RGB` flag to show functionality is available
|
||||
# LOOP_TASK_STACK
|
||||
loop_task_stack_size: "8192" # see LOOP_TASK_STACK.md before changing
|
||||
|
||||
packages:
|
||||
device_base: !include ../base/device_base.yaml
|
||||
@@ -59,6 +61,8 @@ esp32:
|
||||
cpu_frequency: 240MHz
|
||||
framework:
|
||||
type: esp-idf
|
||||
advanced:
|
||||
loop_task_stack_size: ${loop_task_stack_size}
|
||||
|
||||
esphome:
|
||||
platformio_options:
|
||||
|
||||
@@ -1,5 +1,5 @@
|
||||
# Updated : 2026.02.15
|
||||
# Version : 1.1.4
|
||||
# Updated : 2026.07.30
|
||||
# Version : 1.1.5
|
||||
# GitHub : https://github.com/Sleeper85/esphome-yambms
|
||||
|
||||
# YamBMS ( Yet another multi-BMS Merging Solution )
|
||||
@@ -44,6 +44,8 @@ substitutions:
|
||||
talk_pin: '8' # ESP32: 4, ESP32-S3: 8, ESP32-C3: 10
|
||||
# LED
|
||||
board_has_rgb: "true" # LED `RGB` flag to show functionality is available
|
||||
# LOOP_TASK_STACK
|
||||
loop_task_stack_size: "8192" # see LOOP_TASK_STACK.md before changing
|
||||
|
||||
packages:
|
||||
device_base: !include ../base/device_base.yaml
|
||||
@@ -56,6 +58,8 @@ esp32:
|
||||
cpu_frequency: 240MHz
|
||||
framework:
|
||||
type: esp-idf
|
||||
advanced:
|
||||
loop_task_stack_size: ${loop_task_stack_size}
|
||||
|
||||
esphome:
|
||||
platformio_options:
|
||||
|
||||
@@ -1,5 +1,5 @@
|
||||
# Updated : 2026.02.15
|
||||
# Version : 1.1.6
|
||||
# Updated : 2026.07.30
|
||||
# Version : 1.1.7
|
||||
# GitHub : https://github.com/Sleeper85/esphome-yambms
|
||||
|
||||
# YamBMS ( Yet another multi-BMS Merging Solution )
|
||||
@@ -38,6 +38,8 @@ substitutions:
|
||||
spi_mosi_pin: '40'
|
||||
spi_miso_pin: '41'
|
||||
mcp2515_cs_pin: '42'
|
||||
# LOOP_TASK_STACK
|
||||
loop_task_stack_size: "8192" # see LOOP_TASK_STACK.md before changing
|
||||
|
||||
packages:
|
||||
device_base: !include ../base/device_base.yaml
|
||||
@@ -50,6 +52,8 @@ esp32:
|
||||
cpu_frequency: 240MHz
|
||||
framework:
|
||||
type: esp-idf
|
||||
advanced:
|
||||
loop_task_stack_size: ${loop_task_stack_size}
|
||||
|
||||
esphome:
|
||||
platformio_options:
|
||||
|
||||
@@ -1,5 +1,5 @@
|
||||
# Updated : 2026.02.15
|
||||
# Version : 1.1.9
|
||||
# Updated : 2026.07.30
|
||||
# Version : 1.2.0
|
||||
# GitHub : https://github.com/Sleeper85/esphome-yambms
|
||||
|
||||
# YamBMS ( Yet another multi-BMS Merging Solution )
|
||||
@@ -44,6 +44,8 @@ substitutions:
|
||||
spi_miso_pin: '13'
|
||||
spi_clk_pin: '12'
|
||||
mcp2515_cs_pin: '10'
|
||||
# LOOP_TASK_STACK
|
||||
loop_task_stack_size: "8192" # see LOOP_TASK_STACK.md before changing
|
||||
|
||||
packages:
|
||||
device_base: !include ../base/device_base.yaml
|
||||
@@ -56,6 +58,8 @@ esp32:
|
||||
cpu_frequency: 240MHz
|
||||
framework:
|
||||
type: esp-idf
|
||||
advanced:
|
||||
loop_task_stack_size: ${loop_task_stack_size}
|
||||
|
||||
esphome:
|
||||
platformio_options:
|
||||
|
||||
@@ -1,5 +1,5 @@
|
||||
# Updated : 2026.06.28
|
||||
# Version : 1.2.1
|
||||
# Updated : 2026.07.30
|
||||
# Version : 1.2.2
|
||||
# GitHub : https://github.com/Sleeper85/esphome-yambms
|
||||
|
||||
# YamBMS ( Yet another multi-BMS Merging Solution )
|
||||
@@ -40,6 +40,8 @@ substitutions:
|
||||
spi_clk_pin: '12'
|
||||
spi_miso_pin: '13'
|
||||
cs_pin: '4' # ch422g_hub
|
||||
# LOOP_TASK_STACK
|
||||
loop_task_stack_size: "8192" # see LOOP_TASK_STACK.md before changing
|
||||
|
||||
packages:
|
||||
device_base: !include ../base/device_base.yaml
|
||||
@@ -57,6 +59,8 @@ esp32:
|
||||
CONFIG_SPIRAM_FETCH_INSTRUCTIONS: y
|
||||
CONFIG_SPIRAM_RODATA: y
|
||||
CONFIG_ESPTOOLPY_FLASHSIZE_8MB: y
|
||||
advanced:
|
||||
loop_task_stack_size: ${loop_task_stack_size}
|
||||
|
||||
esphome:
|
||||
platformio_options:
|
||||
|
||||
@@ -1,5 +1,5 @@
|
||||
# Updated : 2026.06.28
|
||||
# Version : 1.2.1
|
||||
# Updated : 2026.07.30
|
||||
# Version : 1.2.2
|
||||
# GitHub : https://github.com/Sleeper85/esphome-yambms
|
||||
|
||||
# YamBMS ( Yet another multi-BMS Merging Solution )
|
||||
@@ -37,6 +37,8 @@ substitutions:
|
||||
spi_clk_pin: '12'
|
||||
spi_miso_pin: '13'
|
||||
cs_pin: '4' # ch422g_hub
|
||||
# LOOP_TASK_STACK
|
||||
loop_task_stack_size: "8192" # see LOOP_TASK_STACK.md before changing
|
||||
|
||||
packages:
|
||||
device_base: !include ../base/device_base.yaml
|
||||
@@ -54,6 +56,8 @@ esp32:
|
||||
CONFIG_SPIRAM_FETCH_INSTRUCTIONS: y
|
||||
CONFIG_SPIRAM_RODATA: y
|
||||
CONFIG_ESPTOOLPY_FLASHSIZE_16MB: y
|
||||
advanced:
|
||||
loop_task_stack_size: ${loop_task_stack_size}
|
||||
|
||||
esphome:
|
||||
platformio_options:
|
||||
|
||||
@@ -1,5 +1,5 @@
|
||||
# Updated : 2026.06.28
|
||||
# Version : 1.2.1
|
||||
# Updated : 2026.07.30
|
||||
# Version : 1.2.2
|
||||
# GitHub : https://github.com/Sleeper85/esphome-yambms
|
||||
|
||||
# YamBMS ( Yet another multi-BMS Merging Solution )
|
||||
@@ -40,6 +40,8 @@ substitutions:
|
||||
spi_clk_pin: '12'
|
||||
spi_miso_pin: '13'
|
||||
cs_pin: '4' # ch422g_hub
|
||||
# LOOP_TASK_STACK
|
||||
loop_task_stack_size: "8192" # see LOOP_TASK_STACK.md before changing
|
||||
|
||||
packages:
|
||||
device_base: !include ../base/device_base.yaml
|
||||
@@ -57,6 +59,8 @@ esp32:
|
||||
CONFIG_SPIRAM_FETCH_INSTRUCTIONS: y
|
||||
CONFIG_SPIRAM_RODATA: y
|
||||
CONFIG_ESPTOOLPY_FLASHSIZE_8MB: y
|
||||
advanced:
|
||||
loop_task_stack_size: ${loop_task_stack_size}
|
||||
|
||||
esphome:
|
||||
platformio_options:
|
||||
|
||||
@@ -1,5 +1,5 @@
|
||||
# Updated : 2026.02.15
|
||||
# Version : 1.1.9
|
||||
# Updated : 2026.07.30
|
||||
# Version : 1.2.0
|
||||
# GitHub : https://github.com/Sleeper85/esphome-yambms
|
||||
|
||||
# YamBMS ( Yet another multi-BMS Merging Solution )
|
||||
@@ -40,6 +40,8 @@ substitutions:
|
||||
mcp2515_cs_pin: '6'
|
||||
# LED
|
||||
board_has_rgb: "false" # LED `RGB` flag to show functionality is available
|
||||
# LOOP_TASK_STACK
|
||||
loop_task_stack_size: "8192" # see LOOP_TASK_STACK.md before changing
|
||||
|
||||
packages:
|
||||
device_base: !include ../base/device_base.yaml
|
||||
@@ -52,6 +54,8 @@ esp32:
|
||||
cpu_frequency: 240MHz
|
||||
framework:
|
||||
type: esp-idf
|
||||
advanced:
|
||||
loop_task_stack_size: ${loop_task_stack_size}
|
||||
|
||||
esphome:
|
||||
platformio_options:
|
||||
|
||||
@@ -1,5 +1,5 @@
|
||||
# Updated : 2026.02.15
|
||||
# Version : 1.1.6
|
||||
# Updated : 2026.07.30
|
||||
# Version : 1.1.7
|
||||
# GitHub : https://github.com/Sleeper85/esphome-yambms
|
||||
|
||||
# YamBMS ( Yet another multi-BMS Merging Solution )
|
||||
@@ -35,6 +35,8 @@ substitutions:
|
||||
rx_pin_4: '18'
|
||||
# LED
|
||||
board_has_rgb: "true" # LED `RGB` flag to show functionality is available
|
||||
# LOOP_TASK_STACK
|
||||
loop_task_stack_size: "8192" # see LOOP_TASK_STACK.md before changing
|
||||
|
||||
packages:
|
||||
device_base: !include ../base/device_base.yaml
|
||||
@@ -47,6 +49,8 @@ esp32:
|
||||
cpu_frequency: 240MHz
|
||||
framework:
|
||||
type: esp-idf
|
||||
advanced:
|
||||
loop_task_stack_size: ${loop_task_stack_size}
|
||||
|
||||
esphome:
|
||||
platformio_options:
|
||||
|
||||
@@ -1,5 +1,5 @@
|
||||
# Updated : 2026.02.15
|
||||
# Version : 1.3.4
|
||||
# Updated : 2026.07.30
|
||||
# Version : 1.3.5
|
||||
# GitHub : https://github.com/Sleeper85/esphome-yambms
|
||||
|
||||
# YamBMS ( Yet another multi-BMS Merging Solution )
|
||||
@@ -45,6 +45,8 @@ substitutions:
|
||||
talk_pin: '33'
|
||||
# LED
|
||||
board_has_rgb: "true" # LED `RGB` flag to show functionality is available
|
||||
# LOOP_TASK_STACK
|
||||
loop_task_stack_size: "8192" # see LOOP_TASK_STACK.md before changing
|
||||
|
||||
packages:
|
||||
device_base: !include ../base/device_base.yaml
|
||||
@@ -56,6 +58,8 @@ esp32:
|
||||
cpu_frequency: 240MHz
|
||||
framework:
|
||||
type: esp-idf
|
||||
advanced:
|
||||
loop_task_stack_size: ${loop_task_stack_size}
|
||||
|
||||
esphome:
|
||||
platformio_options:
|
||||
|
||||
@@ -1,5 +1,5 @@
|
||||
# Updated : 2026.02.15
|
||||
# Version : 1.3.4
|
||||
# Updated : 2026.07.30
|
||||
# Version : 1.3.5
|
||||
# GitHub : https://github.com/Sleeper85/esphome-yambms
|
||||
|
||||
# YamBMS ( Yet another multi-BMS Merging Solution )
|
||||
@@ -45,6 +45,8 @@ substitutions:
|
||||
talk_pin: '33'
|
||||
# LED
|
||||
board_has_rgb: "true" # LED `RGB` flag to show functionality is available
|
||||
# LOOP_TASK_STACK
|
||||
loop_task_stack_size: "8192" # see LOOP_TASK_STACK.md before changing
|
||||
|
||||
packages:
|
||||
device_base: !include ../base/device_base.yaml
|
||||
@@ -56,6 +58,8 @@ esp32:
|
||||
cpu_frequency: 240MHz
|
||||
framework:
|
||||
type: esp-idf
|
||||
advanced:
|
||||
loop_task_stack_size: ${loop_task_stack_size}
|
||||
|
||||
esphome:
|
||||
platformio_options:
|
||||
|
||||
@@ -1,5 +1,5 @@
|
||||
# Updated : 2026.02.15
|
||||
# Version : 1.3.3
|
||||
# Updated : 2026.07.30
|
||||
# Version : 1.3.4
|
||||
# GitHub : https://github.com/Sleeper85/esphome-yambms
|
||||
|
||||
# YamBMS ( Yet another multi-BMS Merging Solution )
|
||||
@@ -42,6 +42,8 @@ substitutions:
|
||||
talk_pin: '4' # ESP32: 4, ESP32-S3: 8, ESP32-C3: 10
|
||||
# LED
|
||||
board_has_rgb: "false" # LED `RGB` flag to show functionality is available
|
||||
# LOOP_TASK_STACK
|
||||
loop_task_stack_size: "8192" # see LOOP_TASK_STACK.md before changing
|
||||
|
||||
packages:
|
||||
device_base: !include ../base/device_base.yaml
|
||||
@@ -53,6 +55,8 @@ esp32:
|
||||
cpu_frequency: 240MHz
|
||||
framework:
|
||||
type: esp-idf
|
||||
advanced:
|
||||
loop_task_stack_size: ${loop_task_stack_size}
|
||||
|
||||
esphome:
|
||||
platformio_options:
|
||||
|
||||
@@ -1,5 +1,5 @@
|
||||
# Updated : 2026.02.15
|
||||
# Version : 1.1.8
|
||||
# Updated : 2026.07.30
|
||||
# Version : 1.1.9
|
||||
# GitHub : https://github.com/Sleeper85/esphome-yambms
|
||||
|
||||
# YamBMS ( Yet another multi-BMS Merging Solution )
|
||||
@@ -22,6 +22,8 @@ substitutions:
|
||||
board_name: "espBerry 2-CH-CAN"
|
||||
# LED
|
||||
board_has_rgb: "false" # LED `RGB` flag to show functionality is available
|
||||
# LOOP_TASK_STACK
|
||||
loop_task_stack_size: "8192" # see LOOP_TASK_STACK.md before changing
|
||||
|
||||
packages:
|
||||
device_base: !include ../base/device_base.yaml
|
||||
@@ -33,6 +35,8 @@ esp32:
|
||||
cpu_frequency: 240MHz
|
||||
framework:
|
||||
type: esp-idf
|
||||
advanced:
|
||||
loop_task_stack_size: ${loop_task_stack_size}
|
||||
|
||||
esphome:
|
||||
platformio_options:
|
||||
|
||||
@@ -1,5 +1,5 @@
|
||||
# Updated : 2026.02.15
|
||||
# Version : 1.1.8
|
||||
# Updated : 2026.07.30
|
||||
# Version : 1.1.9
|
||||
# GitHub : https://github.com/Sleeper85/esphome-yambms
|
||||
|
||||
# YamBMS ( Yet another multi-BMS Merging Solution )
|
||||
@@ -32,6 +32,8 @@ substitutions:
|
||||
# canbus_esp32_can
|
||||
tx_pin_4: '5'
|
||||
rx_pin_4: '35'
|
||||
# LOOP_TASK_STACK
|
||||
loop_task_stack_size: "8192" # see LOOP_TASK_STACK.md before changing
|
||||
|
||||
packages:
|
||||
device_base: !include ../base/device_base.yaml
|
||||
@@ -43,6 +45,8 @@ esp32:
|
||||
cpu_frequency: 240MHz
|
||||
framework:
|
||||
type: esp-idf
|
||||
advanced:
|
||||
loop_task_stack_size: ${loop_task_stack_size}
|
||||
|
||||
esphome:
|
||||
platformio_options:
|
||||
|
||||
@@ -1,5 +1,5 @@
|
||||
# Updated : 2026.02.15
|
||||
# Version : 1.3.4
|
||||
# Updated : 2026.07.30
|
||||
# Version : 1.3.5
|
||||
# GitHub : https://github.com/Sleeper85/esphome-yambms
|
||||
|
||||
# YamBMS ( Yet another multi-BMS Merging Solution )
|
||||
@@ -42,6 +42,8 @@ substitutions:
|
||||
talk_pin: '4' # ESP32: 4, ESP32-S3: 8, ESP32-C3: 10
|
||||
# LED
|
||||
board_has_rgb: "false" # LED `RGB` flag to show functionality is available
|
||||
# LOOP_TASK_STACK
|
||||
loop_task_stack_size: "8192" # see LOOP_TASK_STACK.md before changing
|
||||
|
||||
|
||||
packages:
|
||||
@@ -54,6 +56,8 @@ esp32:
|
||||
cpu_frequency: 240MHz
|
||||
framework:
|
||||
type: esp-idf
|
||||
advanced:
|
||||
loop_task_stack_size: ${loop_task_stack_size}
|
||||
|
||||
esphome:
|
||||
platformio_options:
|
||||
|
||||
@@ -1,5 +1,5 @@
|
||||
# Updated : 2026.02.15
|
||||
# Version : 1.1.9
|
||||
# Updated : 2026.07.30
|
||||
# Version : 1.2.0
|
||||
# GitHub : https://github.com/Sleeper85/esphome-yambms
|
||||
|
||||
# YamBMS ( Yet another multi-BMS Merging Solution )
|
||||
@@ -43,6 +43,8 @@ substitutions:
|
||||
mcp2515_cs_pin: '25'
|
||||
# LED
|
||||
board_has_rgb: "true" # LED `RGB` flag to show functionality is available
|
||||
# LOOP_TASK_STACK
|
||||
loop_task_stack_size: "8192" # see LOOP_TASK_STACK.md before changing
|
||||
|
||||
packages:
|
||||
device_base: !include ../base/device_base.yaml
|
||||
@@ -54,6 +56,8 @@ esp32:
|
||||
cpu_frequency: 240MHz
|
||||
framework:
|
||||
type: esp-idf
|
||||
advanced:
|
||||
loop_task_stack_size: ${loop_task_stack_size}
|
||||
|
||||
esphome:
|
||||
platformio_options:
|
||||
|
||||
@@ -1,5 +1,5 @@
|
||||
# Updated : 2026.02.15
|
||||
# Version : 1.1.5
|
||||
# Updated : 2026.07.30
|
||||
# Version : 1.1.6
|
||||
# GitHub : https://github.com/Sleeper85/esphome-yambms
|
||||
|
||||
# YamBMS ( Yet another multi-BMS Merging Solution )
|
||||
@@ -38,6 +38,8 @@ substitutions:
|
||||
rx_pin_4: '15' # to CAN transceiver CRX
|
||||
# LED
|
||||
board_has_rgb: "false" # LED `RGB` flag to show functionality is available
|
||||
# LOOP_TASK_STACK
|
||||
loop_task_stack_size: "8192" # see LOOP_TASK_STACK.md before changing
|
||||
|
||||
packages:
|
||||
device_base: !include ../base/device_base.yaml
|
||||
@@ -49,6 +51,8 @@ esp32:
|
||||
cpu_frequency: 240MHz
|
||||
framework:
|
||||
type: esp-idf
|
||||
advanced:
|
||||
loop_task_stack_size: ${loop_task_stack_size}
|
||||
|
||||
esphome:
|
||||
platformio_options:
|
||||
|
||||
@@ -1,5 +1,5 @@
|
||||
# Updated : 2026.02.15
|
||||
# Version : 1.1.5
|
||||
# Updated : 2026.07.30
|
||||
# Version : 1.1.6
|
||||
# GitHub : https://github.com/Sleeper85/esphome-yambms
|
||||
|
||||
# YamBMS ( Yet another multi-BMS Merging Solution )
|
||||
@@ -60,6 +60,8 @@ substitutions:
|
||||
mcp2515_cs_pin: '15'
|
||||
# LED
|
||||
board_has_rgb: "false" # LED `RGB` flag to show functionality is available
|
||||
# LOOP_TASK_STACK
|
||||
loop_task_stack_size: "8192" # see LOOP_TASK_STACK.md before changing
|
||||
|
||||
packages:
|
||||
device_base: !include ../base/device_base.yaml
|
||||
@@ -71,6 +73,8 @@ esp32:
|
||||
cpu_frequency: 240MHz
|
||||
framework:
|
||||
type: esp-idf
|
||||
advanced:
|
||||
loop_task_stack_size: ${loop_task_stack_size}
|
||||
|
||||
esphome:
|
||||
platformio_options:
|
||||
|
||||
Reference in new issue
Block a user