Add Freenove S3 board

* Add Freenove S3 board
* New `mcp2515_clock` var
* Following PR New LED Control Logic #179
This commit is contained in:
Txubelaxu authored and GitHub committed 2026-01-30 19:49:34 +01:00
1 parent d44f3921dd
commit a36e4579e2
2 files changed
+90 -2

No files matched your search

@@ -0,0 +1,86 @@
# Updated : 2026.01.30
# Version : 1.1.1
# GitHub : https://github.com/Sleeper85/esphome-yambms
# YamBMS ( Yet another multi-BMS Merging Solution )
# This YAML is free software: you can redistribute it and/or
# modify it under the terms of the GNU General Public License
# as published by the Free Software Foundation, either version 3
# of the License, or (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
# See the GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program. If not, see <http://www.gnu.org/licenses/gpl.html>.
substitutions:
board_chip: "ESP32-S3"
board_name: "Freenove"
# Interfaces GPIOs
# uart_esp_1
tx_pin_1: '17'
rx_pin_1: '18'
# uart_esp_2
tx_pin_2: '15'
rx_pin_2: '16'
# uart_esp_3
tx_pin_3: '13'
rx_pin_3: '14'
# canbus_esp32_can
tx_pin_4: '38'
rx_pin_4: '39'
# canbus_mcp2515
mcp2515_cs_pin: '9' # CS
spi_clk_pin: '10' # SCK
spi_mosi_pin: '11' # MOSI
spi_miso_pin: '12' # MISO
# talk_pin
talk_pin: '8' # ESP32: 4, ESP32-S3: 8, ESP32-C3: 10
# Requirement: RGB flag to show functionality is available
board_has_rgb: "true"
packages:
device_base: !include ../base/device_base.yaml
device_base_wifi: !include ../base/device_base_wifi.yaml
board_rgb_led: !include board_options_rgb_led_status.yaml
esp32:
board: esp32-s3-devkitc-1
flash_size: 8MB # adjust according to your ESP32-S3 version
cpu_frequency: 240MHz
framework:
type: esp-idf
esphome:
platformio_options:
board_build.flash_mode: dio # use Dual IO (dio) instead of Quad IO (qio) to prevent boot loop after flashing
wifi:
id: my_network
ssid: !secret wifi_ssid
password: !secret wifi_password
domain: !secret domain
reboot_timeout: 0s
logger:
baud_rate: 0 # frees the 3rd UART and avoids some bugs like "WK2168 with canbus" or "BLE client with RS485 modbus"
hardware_uart: UART0 # UART0 / USB_SERIAL_JTAG
light:
# https://esphome.io/components/light/esp32_rmt_led_strip
# ESP Light used to see the inverter heartbeat
# Internal : only specifying an id without a name will implicitly set this to true.
- platform: esp32_rmt_led_strip
id: esp_light
# name: ${name} ESP32 Light
rgb_order: GRB
pin: 48
num_leds: 1
# rmt_channel: 0
chipset: ws2812
entity_category: config
default_transition_length: 0ms
@@ -1,5 +1,5 @@
# Updated : 2025.09.12
# Version : 1.1.4
# Updated : 2026.01.30
# Version : 1.1.5
# GitHub : https://github.com/Sleeper85/esphome-yambms
# YamBMS ( Yet another multi-BMS Merging Solution )
@@ -22,6 +22,7 @@
substitutions:
mcp2515_canbus_id: '2'
mcp2515_canbus_bitrate: '500kbps'
mcp2515_clock: '8MHz'
spi:
- id: mcp2515_spi
@@ -37,3 +38,4 @@ canbus:
cs_pin: ${mcp2515_cs_pin}
can_id: ${mcp2515_canbus_id}
bit_rate: ${mcp2515_canbus_bitrate}
clock: ${mcp2515_clock} # Default MCP2515 clock is 8MHz; many boards use 16MHz