Andrew Rankin
22c89bb6fb
Add M5Stack Tab5 with LVGL display ( #200 )
2026-02-25 19:41:09 +01:00
Sebastian
dbd3675363
Auto CCL/DCL: Add division by zero/isnan checks ( #244 )
...
* Auto CCL: Add division by zero/isnan checks
* Auto DCL: Check values before calculation
* Auto CVL: isnan/value checks
2026-02-25 19:37:47 +01:00
Sebastian
aad9f31f1f
Value checks ( #243 )
...
* Add checks to avoid division by zero
* Auto float: Code cleanup
* Auto temp CCL/DCL: Check if battery capacity is 0
* Canbus: || vs. |
2026-02-25 19:35:13 +01:00
Sebastian
4c31809ec4
Auto EOC: Reset filtered current when disabled ( #246 )
2026-02-23 18:47:12 +01:00
Sebastian
0817a13485
Add fault registry calls to Modbus clients ( #239 )
2026-02-19 23:54:28 +01:00
Sleeper85
9af9912fb8
Added trigger_on_initial_state: true
2026-02-19 23:03:23 +01:00
Sleeper85
ac64ace3cd
YamBMS basic blue display 1.1.2 HA and ESPHome version
2026-02-19 23:01:34 +01:00
Sleeper85
0fe37b7af2
Added default substitutions
2026-02-18 10:49:19 +01:00
Sleeper85
fcad4d6fc1
Added new LVGL display 800x400 basic blue
2026-02-18 10:36:17 +01:00
Sleeper85
dacf36e280
Fixed RS485 PYLON device_id
2026-02-17 11:46:57 +01:00
Sebastian
6a70079b3e
Switch to VictronMPPT-ESPHOME fork ( #236 )
...
This fork includes the following improvements:
- Include PR 212: Checksum validation: Verify the checksum to detect
transmission errors
- Improve logging: More log messages and output shunt ID
- Add online sensor and timeout parameter: Disconnects were not
detected. This adds a binary_sensor that gets set to false if no
data is received for specified time (default=5s).
- Fix throttle algorithm: Each frame type gets its own throttle
handling.
- Use new Victron SmartShunt online status
2026-02-17 11:01:46 +01:00
Sebastian
1969f14892
Basen: Add "Enable communication" switch ( #235 )
...
Add switch to enable/disable communication with Basen BMS. For example
this can be used during maintenance to disable communication with the
selected battery.
2026-02-16 21:01:05 +01:00
Sleeper85
893741d8d0
Set esphome min_version to 2026.1.5
2026-02-16 15:24:36 +01:00
Sleeper85
040da87739
Set SEPLOS V3 extended as the default version #216
2026-02-16 15:18:29 +01:00
Sleeper85
6fb2710095
Added canbus_extended_ack for Schneider XW Pro
2026-02-16 10:06:20 +01:00
Andrew Rankin
500d7fa8f6
Add Ecoworthy BMS integration for YamBMS ( #199 )
2026-02-15 22:49:43 +01:00
Sleeper85
ffb8a443bc
Using variant instead of board
2026-02-15 21:32:07 +01:00
Sleeper85
247643195b
Create bms_combine_DEMO.yaml
2026-02-15 13:33:09 +01:00
Sleeper85
f70359c0a8
SEPLOS V3 extended version
2026-02-13 16:15:19 +01:00
Sebastian
bd380e83a7
Remove unused shunt Modbus registers charging/discharging power ( #227 )
2026-02-13 15:32:24 +01:00
Sleeper85
de35aa593c
Fixed Force Bulk issue #215
2026-02-12 21:22:55 +01:00
Sleeper85
7bf602fd1c
Added BMS FAKE extended
2026-02-11 15:58:59 +01:00
MrPabloUK
f405228fc4
Auto CCL & DCL - Re-implement Soft Current Ramp ( #219 )
2026-02-11 09:44:32 +01:00
Sleeper85
b486f34a06
Create bms_demo_charge_simulation.yaml
2026-02-11 02:06:04 +01:00
Sleeper85
b4ff48d377
New BMS FAKE automated
2026-02-11 02:05:53 +01:00
Sleeper85
e47d478a65
Improved code + fixed issue #218
2026-02-11 01:59:52 +01:00
Sleeper85
16937f9e1f
Added missing unit_of_measurement
2026-02-10 08:55:27 +01:00
Sleeper85
5f50f158ee
Added yambms_debug logs
2026-02-09 23:59:25 +01:00
Sleeper85
2c4022d54c
Updated ESPHome min_version
2026-02-09 08:27:36 +01:00
MrPabloUK
d0ec5798e9
Auto CCL and DCL to new loop ( #212 )
...
* Auto CCL and DCL to new loop
* Refactor ratio calculation to use float
* Refactor to use float for performance and ram usage improvement
2026-02-08 19:17:05 +01:00
Sleeper85
881e9b5d28
Added ${yambms_id}_var_auto_ccl_soft_landing global var
2026-02-08 12:57:11 +01:00
Sleeper85
5ed95b0db9
Updated switch id name
2026-02-07 17:17:37 +01:00
Sebastian
c4d7544235
Update modbus_id for balancer_modbus_server.yaml ( #211 )
2026-02-07 16:09:20 +01:00
Sleeper85
6836806bb0
Fixed issue #195
2026-02-07 13:54:25 +01:00
Sleeper85
29a0fe1dee
Update bms_options_charging_logic.yaml
2026-02-07 13:53:23 +01:00
Sleeper85
98b815e3ee
Fixed on_boot priority
2026-02-07 12:42:52 +01:00
Sebastian and Sleeper85
15284fe34a
balancer_modbus_client.yaml: trigger_on_initial_state was present two times ( #210 )
...
Co-authored-by: Sleeper85 <153944466+Sleeper85@users.noreply.github.com >
2026-02-06 17:13:28 +01:00
Sleeper85
57f256a71d
Modbus packages update for testing modbus dev PRs
2026-02-06 16:59:49 +01:00
Sebastian
0b52365492
Clamp Modbus client sensors to reasonable values ( #209 )
2026-02-06 16:08:28 +01:00
Sleeper85
0b2cd66bc5
Fixed comments identation
2026-02-06 11:34:50 +01:00
Sebastian
80d5c9ab39
JK-BMS: Add temperature configuration ( #205 )
2026-02-06 00:30:59 +01:00
MrPabloUK
e846ff8ea2
Update fault registry source sensors to trigger on initial state ( #203 )
2026-02-05 23:44:42 +01:00
MrPabloUK
2b1aa0f660
Update board configurations and add no LED control options ( #206 )
2026-02-05 23:40:32 +01:00
Sleeper85
831fc11f13
Update bms_options_charging_logic.yaml
2026-02-05 22:27:02 +01:00
Sleeper85
8db17d6e64
Deleting unnecessary YAMLs
2026-02-05 21:41:02 +01:00
Sebastian
032b2e309b
Workaround for RP2040 compile bug ( #204 )
2026-02-05 21:27:00 +01:00
Sleeper85
2f30d804bc
Updated PVbrain2 board
2026-02-05 17:42:54 +01:00
Sleeper85
cfd178801f
Updated and new board interfaces
2026-02-05 17:41:49 +01:00
MrPabloUK
9c664bd5fb
RP2040 fix - remove global fault mask logging ( #198 )
2026-02-05 12:36:56 +01:00
Sleeper85
56a51cb534
Board and display code splitted
2026-02-05 11:47:43 +01:00