Andrew Rankin
59cb64181e
Correct min/max cells ( #140 )
2025-12-18 19:06:40 +00:00
Sleeper85
84eb560c66
Fixed bms and shunt modbus client sub_device_id
2025-12-18 00:21:32 +01:00
Sleeper85
6bc6b5b54e
Added talk_pin substitution
2025-12-17 22:57:13 +01:00
Sleeper85
2745bf9168
YAML BMS examples renamed
2025-12-17 22:13:24 +01:00
Sleeper85
da8e3f0200
Fixed sub_device
2025-12-17 22:04:05 +01:00
Sleeper85
e8cdadce56
JK RS485 cell balancing trigger voltage name
2025-12-17 19:36:30 +01:00
Sleeper85
eaf65ded61
Increase LFP cv_min to 3.375
2025-12-17 19:22:19 +01:00
MrPabloUK
547b824b5e
Sub device support ( #134 )
2025-12-17 00:42:53 +01:00
Sleeper85
a3fe73c3a2
Added the last PR #12421
2025-12-16 09:46:43 +01:00
Sleeper85
610309debf
Fixed battery_capacity_remaining DEMO dashboard
2025-12-15 10:50:41 +01:00
Sleeper85
c55ba4785c
Alignment of the DEMO dashboard with version 1.2.0 of BMS fake sensors
2025-12-15 10:39:01 +01:00
Andrew Rankin
a9394095d2
[EG4] Swap away from esphome modbus component ( #130 )
...
* Rebase was a mess, so re-adding based on the dev branch.
* updates for the 1.6.0 release / dev branch to compile.
* Update external component source version
* Updated the external component source version from main to v1.0.0.
* Update external component source version to v1.0.0
* Add an example for EG4.
2025-12-15 10:06:21 +01:00
Sleeper85
a6536155c4
Merge branch 'dev' of https://github.com/Sleeper85/esphome-yambms into dev
2025-12-15 09:44:50 +01:00
Sleeper85
ea30ea145c
BMS fake sensors 1.2.0
2025-12-15 09:39:27 +01:00
kolins-cz
7c5523eaf4
Add Studer XTM-4000 to supported inverters ( #133 )
2025-12-10 12:50:07 +00:00
Sleeper85
b2c5f65478
Reorganization of variables
2025-12-09 02:45:05 +01:00
Sleeper85
de6d37e308
YamBMS modbus dev YAMLs
2025-12-05 22:05:41 +01:00
Sleeper85
7e8b88f841
Fixed JK RS485 switch names (issue #123 )
2025-12-04 21:33:49 +01:00
Sleeper85
93730d856d
YamBMS 1.6.0 - Updated README
2025-12-01 23:12:10 +01:00
Sleeper85
942b7c6fbb
Added JK RS485 talk_pin examples
2025-12-01 18:34:44 +01:00
Sleeper85
d1e976123b
YamBMS 1.6.0 - dev branch example
2025-11-26 08:57:29 +01:00
Sleeper85
f4f2957558
Dashboards 1.6.0 - 2025.11.25
2025-11-26 08:54:00 +01:00
Sebastian
b2f4fb5b87
Add explanation for Temperature-based current limitation calculation ( #118 )
2025-11-26 00:13:22 +01:00
Sebastian
147a176748
Round requested charge/discharge current to nearest integer ( #117 )
...
Because of temperature based current limitation, the requested charge/discharge current could be non-integer values. For the used high-power applications, sub 1A precision is not required and may add noise.
2025-11-26 00:11:53 +01:00
Sleeper85
9847a53755
New Multi-node BMS names
2025-11-26 00:07:16 +01:00
Sleeper85
9e196afef3
Remove the non-functional SEPLOS V3 version ( #94 )
2025-11-26 00:04:34 +01:00
Sleeper85
8ce4d7d255
YamBMS 1.6.0 - Fixed issue #116
2025-11-25 08:44:03 +01:00
Sleeper85
6cbf9d72d5
YamBMS 1.6.0 - Max requested current in A
2025-11-25 00:08:49 +01:00
Sleeper85
4fa50d1c5f
Improved Remaining Capacity when using a shunt ( #102 )
2025-11-24 19:52:28 +01:00
Sleeper85
d635c9c0c8
Dashboards 1.6.0 - Temperature-based current limiting and remaining capacity
2025-11-24 19:03:21 +01:00
Sleeper85
e2de6d6724
Fixed update_interval
2025-11-24 17:02:10 +01:00
Sleeper85
428f9115c9
AtomS3 GPIOs for Atomic RS485 base (uart_esp_3)
2025-11-24 16:56:30 +01:00
Sleeper85
dcbf3e6b8a
YamBMS 1.6.0 - 2025.11.23
2025-11-24 14:34:30 +01:00
Sleeper85
6107f9e365
Create bms_modbus_PACE_RS485_bms_full.yaml
2025-11-24 01:45:52 +01:00
Sleeper85
48cf6da6c2
Create board_options_itf_uart_flow_control.yaml
2025-11-23 23:49:31 +01:00
Sleeper85
af0ac536a2
Code standardization (auto functions)
2025-11-23 17:46:31 +01:00
5hortCircuit
59ad20f447
Adding FLIP_C3 board ( #112 )
...
* Adding FLIP_C3 board
The FLIP_C3 is a simple ESP32-C3 board that has an integrated power supply that has a 60V input. This board can be connected directly to a 48V battery and then be used with the M5Stack Isolated RS485 Unit (U094) to get a RS485 connection back to the master unit. I successfully used 4 of these units to communicate with the JK-BMS B-Series BMS's. The FLIP_C3 has an onboard 5V regulator that can power the RS485 module, 2 UART exposed on connectors that can be used for TTL to the BMS and TTL to the RS485 module. In the US it is available on Amazon, product page: https://wiki.vdbx.io/product/flip_c3
* Added missing GPIOs to FLIP_C3 board
2025-11-22 10:20:19 +01:00
Sleeper85
592a19e87c
JK-PB Erase History Data function
2025-11-19 23:00:51 +01:00
Sleeper85
a90071bd87
New BMS battery_capacity_remaining manipulated sensor (issue #96 )
2025-11-17 00:12:04 +01:00
Sleeper85
46049be161
Fixed link to Downgrading to 19.10
2025-11-16 15:23:27 +01:00
Sleeper85
cba6716eeb
Updated JK-PB readme with V19 warning and SoC 100% reset solution 1 and 2
2025-11-16 15:11:55 +01:00
Sleeper85
a1a2ce9e19
Improved SEPLOS V1 V2 examples
2025-11-15 00:19:38 +01:00
Sleeper85
68a7a6aac6
Added SEPLOS V3 sniffer version
2025-11-14 23:35:59 +01:00
Sleeper85
cc2e3fc0eb
Replaced branch dev to main
2025-11-14 23:35:16 +01:00
Sleeper85
f1f22aa559
Added ESP32-S3_WS-ETH board
2025-11-14 23:32:02 +01:00
Sleeper85
866c4b39a0
Added talk_pin to ESP32-S3_WS-RS485-CAN board
2025-11-14 23:30:57 +01:00
Sleeper85
3e4c9e18af
Delete lovelace-cards-contribution.png
2025-11-14 23:28:07 +01:00
Sleeper85
d6f211fdd3
Added Waveshare ESP32-S3-RS485-CAN
2025-11-14 23:27:10 +01:00
Sleeper85
fbea8d3ffc
Hardware highlighted and changelog moved
2025-11-14 23:08:34 +01:00
Sleeper85
beb9139d90
Fixed balance_trigger_voltage and equalizing IDs
2025-10-25 13:09:56 +02:00