3 Commits
Author SHA1 Message Date
sharad 8a9b8f3213 Update packages/base/device_base_sub_device.yaml 2026-11-18 22:54:23 -08:00
Sleeper85 f44738ce8f HA dashboards 1.8.1 - Restore the Cut-Off Cell Voltage select
The select.yambms_1_cut_off_cell_voltage entity was dropped from the
"YamBMS - Charging Settings" card by mistake in 9febfa4. Put it back
after Charger Offset V in every dashboard.
2026-11-12 18:34:03 +01:00
Sleeper85 9e8dff09e5 Docs: Add inferred balancing to the 1.8.1 upgrade guide
EG4 LL V2, Seplos V1/V2, Seplos V3 and JK RS485 DISPLAY now infer their
balancing state. It changes when the charge ends without any validation
error, so it belongs in the biggest changes of the upgrade guide.
2026-11-10 13:20:33 +01:00
7 changed files with 21 additions and 0 deletions

No files matched your search

@@ -349,6 +349,9 @@ views:
- entity: number.yambms_demo_charger_offset_v
name:
type: entity
- entity: select.yambms_demo_cut_off_cell_voltage
name:
type: entity
- type: weblink
url: >-
https://github.com/Sleeper85/esphome-yambms/blob/main/documents/README/YamBMS_functions.md#charging-settings
@@ -452,6 +452,9 @@ views:
- entity: number.yambms_1_charger_offset_v
name:
type: entity
- entity: select.yambms_1_cut_off_cell_voltage
name:
type: entity
- type: weblink
url: >-
https://github.com/Sleeper85/esphome-yambms/blob/main/documents/README/YamBMS_functions.md#charging-settings
@@ -452,6 +452,9 @@ views:
- entity: number.yambms_1_charger_offset_v
name:
type: entity
- entity: select.yambms_1_cut_off_cell_voltage
name:
type: entity
- type: weblink
url: >-
https://github.com/Sleeper85/esphome-yambms/blob/main/documents/README/YamBMS_functions.md#charging-settings
@@ -452,6 +452,9 @@ views:
- entity: number.yambms_1_charger_offset_v
name:
type: entity
- entity: select.yambms_1_cut_off_cell_voltage
name:
type: entity
- type: weblink
url: >-
https://github.com/Sleeper85/esphome-yambms/blob/main/documents/README/YamBMS_functions.md#charging-settings
@@ -452,6 +452,9 @@ views:
- entity: number.yambms_1_charger_offset_v
name:
type: entity
- entity: select.yambms_1_cut_off_cell_voltage
name:
type: entity
- type: weblink
url: >-
https://github.com/Sleeper85/esphome-yambms/blob/main/documents/README/YamBMS_functions.md#charging-settings
@@ -28,6 +28,11 @@ have made the changes below.
CAN and RS485 links can run at the same time: keep both blocks, each link with its own
`canbus_id` or `rs485_id`. The dashboard shows up to 3 CAN links and 3 RS485 links. If you only
use RS485, comment out the CAN block.
- **Balancing inferred:** EG4 LL V2, Seplos V1/V2, Seplos V3 and JK RS485 DISPLAY do not report
balancing, and YamBMS now infers it from the cell spread. While a pack is seen as balancing, the
charge only ends when the spread closes or the EOC timer expires, and the SoC stays at 98% until
then. Set `bms_balance_trigger_voltage` to your BMS's actual setting and keep `EOC timer enabled`
ON. See [Fake Equalizing](Changelog_Fake_Equalizing.md).
## How to update from 1.7.0 or 1.8.0
@@ -26,3 +26,4 @@ esphome:
devices:
- id: ${board_id}
name: "${friendly_name} board"
relation: via