Files

69 lines
2.8 KiB
YAML

# Updated : 2026.02.16
# Version : 1.1.1
# GitHub : https://github.com/Sleeper85/esphome-yambms
# YamBMS ( Yet another multi-BMS Merging Solution )
# This YAML is free software: you can redistribute it and/or
# modify it under the terms of the GNU General Public License
# as published by the Free Software Foundation, either version 3
# of the License, or (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
# See the GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program. If not, see <http://www.gnu.org/licenses/gpl.html>.
############################ Remote Packages Example ###########################
# This is not a working YAML but just code ready to copy into
# your main YAML below the `packages:` section.
# packages:
# remote_packages:
# url: https://github.com/Sleeper85/esphome-yambms
# ref: main
# refresh: 60s
# files:
################################################################################
# Basen controller
- path: 'packages/bms/bms_combine_BASEN_RS485_controller.yaml'
vars:
basen_uart_id: 'uart_esp_1'
basen_uart_baud_rate: '9600'
basen_controller_id: "basen_controller_1"
# Basen module 1
- path: 'packages/bms/bms_combine_BASEN_RS485_full.yaml'
vars:
bms_id: '1' # must be a number
bms_name: 'BASEN-BMS 1'
bms_address: '0x01'
bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable
# Basen module 2
- path: 'packages/bms/bms_combine_BASEN_RS485_full.yaml'
vars:
bms_id: '2' # must be a number
bms_name: 'BASEN-BMS 2'
bms_address: '0x02'
bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable
# Balancer 1 linked to BMS 1
- path: 'packages/balancer/balancer_sensors_JK_NEEY_BLE.yaml'
vars:
bms_id: '1' # must match the BMS ID
balancer_name: 'Balancer 1'
balancer_ble_mac_address: 11:22:33:44:55:66
balancer_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable
# Balancer 2 linked to BMS 2
- path: 'packages/balancer/balancer_sensors_JK_NEEY_BLE.yaml'
vars:
bms_id: '2' # must match the BMS ID
balancer_name: 'Balancer 2'
balancer_ble_mac_address: 11:22:33:44:55:67
balancer_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out or set to 'nullptr' to disable