YamBMS 1.7.0 examples (2026.02.16)
This commit is contained in:
1 parent
5841192281
commit
d178ffa5c8
53 files changed
+799
-324
No files matched your search
@@ -0,0 +1,414 @@
|
||||
# Updated : 2026.02.16
|
||||
# Version : 1.7.0
|
||||
# GitHub : https://github.com/Sleeper85/esphome-yambms
|
||||
|
||||
# YamBMS ( Yet another multi-BMS Merging Solution )
|
||||
|
||||
# This YAML is free software: you can redistribute it and/or
|
||||
# modify it under the terms of the GNU General Public License
|
||||
# as published by the Free Software Foundation, either version 3
|
||||
# of the License, or (at your option) any later version.
|
||||
#
|
||||
# This program is distributed in the hope that it will be useful,
|
||||
# but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
|
||||
# See the GNU General Public License for more details.
|
||||
#
|
||||
# You should have received a copy of the GNU General Public License
|
||||
# along with this program. If not, see <http://www.gnu.org/licenses/gpl.html>.
|
||||
|
||||
######################## YamBMS Remote Packages Version ########################
|
||||
|
||||
# You can compile this YAML directly without the `packages` folder.
|
||||
# The packages will be automatically downloaded from GitHub.
|
||||
# Don't forget to configure your WiFi credentials in the secrets.yaml
|
||||
|
||||
################################################################################
|
||||
|
||||
# If needed, configure a static IP here
|
||||
# wifi:
|
||||
# manual_ip:
|
||||
# static_ip: 192.168.0.85
|
||||
# gateway: 192.168.0.1
|
||||
# subnet: 255.255.255.0
|
||||
# dns1: 8.8.8.8
|
||||
# dns2: 8.8.4.4
|
||||
|
||||
logger:
|
||||
level: DEBUG # VERBOSE / DEBUG / INFO / WARN
|
||||
# baud_rate: 115200 # Send logs to the `hardware_uart` USB output (this consumes a UART interface)
|
||||
# hardware_uart: UART0 # UART0 / USB_SERIAL_JTAG
|
||||
|
||||
ota:
|
||||
- platform: esphome
|
||||
|
||||
# Uncomment:
|
||||
# API: to monitor entities via Home Assistant
|
||||
# MQTT: to monitor entities via another system
|
||||
# Neither: to monitor entities only via `web_server` or nothing
|
||||
|
||||
api:
|
||||
reboot_timeout: 0s
|
||||
|
||||
# mqtt:
|
||||
# broker: !secret mqtt_host
|
||||
# username: !secret mqtt_username
|
||||
# password: !secret mqtt_password
|
||||
# id: mqtt_client
|
||||
|
||||
# +--------------------------------------+
|
||||
# | Global Settings |
|
||||
# +--------------------------------------+
|
||||
substitutions:
|
||||
# Name
|
||||
friendly_name : 'YamBMS Demo' # Prefix added in front of the `entity name`, also used to classify them.
|
||||
hostname: 'yambms-demo' # Name of your ESP32 registered on the IP network (DNS name, must be unique).
|
||||
name: '' # This name can be added as a second prefix, both for the `entity display name` and the `entity id`, you can leave it blank.
|
||||
# +--------------------------------------+
|
||||
# | YamBMS Settings |
|
||||
# +--------------------------------------+
|
||||
# Please read the cut-off charging logic README to understand how the YamBMS works
|
||||
yambms_id: 'yambms1'
|
||||
yambms_name: 'YamBMS 1'
|
||||
yambms_update_interval: '1s'
|
||||
# Input numbers can be displayed as a slider or an input box, options are 'slider' or 'box'.
|
||||
yambms_input_number_mode: 'slider'
|
||||
# Please check and fill in the options below correctly according to your battery chemistry and number of cells in series.
|
||||
# These parameters are important and used for charging logic.
|
||||
# Battery Chemistry
|
||||
yambms_battery_chemistry: '1' # 1-LFP | 2-Li-ion | 3-LTO
|
||||
# Number of cells in series
|
||||
yambms_cell_count: '16'
|
||||
# Bulk / Absorption Voltage : corresponds to the Bulk voltage that will be used to charge the battery. (LFP : 55.2V = 3.45V/Cell for 16S battery)
|
||||
yambms_bulk_v: '55.2'
|
||||
# Float Voltage : corresponds to the voltage at which the battery would be maintained at the end of charge. (LFP : 53.6V = 3.35V/Cell for 16S battery)
|
||||
yambms_float_v: '53.6'
|
||||
# Rebulk voltage, voltage from which a new Bulk charge can start. (LFP : 52.8V = 3.3V/Cell for 16S battery)
|
||||
yambms_rebulk_v: '52.8'
|
||||
# Maximum time in minutes that the cut-off step can last before charging is complete
|
||||
# If your cells are properly balanced this step ends at the fastest after the `cut-off timer`
|
||||
# This timer can be deactivated with a switch
|
||||
yambms_eoc_timer: '30'
|
||||
# Time in seconds during which the end of charge conditions must be respected (cut-off + cells not equalizing)
|
||||
yambms_cutoff_timer: '60'
|
||||
# Max. charge current : corresponds to the maximum charge current which may be requested by YamBMS.
|
||||
# The current requested will be proportional to the BMS count without ever exceeding this value.
|
||||
yambms_max_requested_charge_current: '300' # in Ampere
|
||||
# Max. discharge current : corresponds to the maximum discharge current which may be requested by YamBMS.
|
||||
# The current requested will be proportional to the BMS count without ever exceeding this value.
|
||||
yambms_max_requested_discharge_current: '300' # in Ampere
|
||||
# +-------------------------------------------------------------------------
|
||||
# | Temperature-based current limitation
|
||||
# | Can be disabled via the switch "Temperature-based current limitation"
|
||||
# | This factor is applied to the battery capacity (Ah), not the current
|
||||
# | maximum charge/discharge current. For example : 280Ah x 0.5 = 140A
|
||||
# +-------------------------------------------------------------------------
|
||||
# Temperature °C -> Charge Rate (0.0C to 1.0C)
|
||||
yambms_charging_rate_table: |
|
||||
{
|
||||
{ -0.1, 0.00 },
|
||||
{ 0.0, 0.05 },
|
||||
{ 5.0, 0.12 },
|
||||
{ 10.0, 0.30 },
|
||||
{ 20.0, 0.50 },
|
||||
{ 25.0, 0.50 },
|
||||
{ 45.0, 0.50 },
|
||||
{ 50.0, 0.50 },
|
||||
{ 55.0, 0.50 },
|
||||
{ 60.0, 0.00 }
|
||||
}
|
||||
# Temperature °C -> Discharge Rate (0.0C to 1.0C)
|
||||
yambms_discharging_rate_table: |
|
||||
{
|
||||
{-30.0, 0.00 },
|
||||
{-20.0, 0.50 },
|
||||
{-10.0, 0.50 },
|
||||
{ -5.0, 0.50 },
|
||||
{ 0.0, 0.50 },
|
||||
{ 5.0, 0.50 },
|
||||
{ 45.0, 0.50 },
|
||||
{ 50.0, 0.50 },
|
||||
{ 55.0, 0.50 },
|
||||
{ 60.0, 0.00 }
|
||||
}
|
||||
# +--------------------------------------+
|
||||
# | Shunt Settings |
|
||||
# +--------------------------------------+
|
||||
shunt_update_interval: '3s' # frequency at which Shunt data is refreshed
|
||||
# +--------------------------------------+
|
||||
# | BMS Settings |
|
||||
# +--------------------------------------+
|
||||
bms_update_interval: '3s' # frequency at which BMS data is refreshed, going below '3s' can cause problems
|
||||
# +--------------------------------------+
|
||||
# | Health & LED Assignment Logs |
|
||||
# +--------------------------------------+
|
||||
enable_led_logging: 'false' # Set to true to see if an led is assigned to a component correctly, logged every 60 seconds
|
||||
enable_health_logging: 'false' # Set to true to see if component health for all component instances, logged every 60 seconds
|
||||
|
||||
|
||||
|
||||
# +--------------------------------------+
|
||||
# | Packages |
|
||||
# +--------------------------------------+
|
||||
|
||||
# PLEASE READ : https://github.com/Sleeper85/esphome-yambms/blob/main/documents/README/YamBMS_LP_YAML.md
|
||||
|
||||
packages:
|
||||
|
||||
# +------------------------------------------------------------------------------+
|
||||
# | >>> UNCOMMENT YOUR BOARD
|
||||
# | >>> ONLY ONE BOARD !
|
||||
# +------------------------------------------------------------------------------+
|
||||
|
||||
# This list is incomplete, other board.yaml are available in the board folder
|
||||
|
||||
board: !include
|
||||
file: 'packages/board/board_ESP32_Generic.yaml'
|
||||
# file: 'packages/board/board_ESP32_Atom-Lite.yaml'
|
||||
# file: 'packages/board/board_ESP32_DevKit-V1.yaml'
|
||||
# file: 'packages/board/board_ESP32_EVB.yaml'
|
||||
# file: 'packages/board/board_ESP32_iBMS_CAN_RS485_V3.3.yaml'
|
||||
# file: 'packages/board/board_ESP32_LilyGo-T-CAN485.yaml'
|
||||
# file: 'packages/board/board_ESP32-C3_DevKitM-1.yaml'
|
||||
# file: 'packages/board/board_ESP32-C3_ETH01-EVO.yaml'
|
||||
# file: 'packages/board/board_ESP32-C3_FlipC3.yaml'
|
||||
# file: 'packages/board/board_ESP32-S3_Generic.yaml'
|
||||
# file: 'packages/board/board_ESP32-S3_AtomS3-Lite.yaml'
|
||||
# file: 'packages/board/board_ESP32-S3_AtomS3.yaml'
|
||||
# file: 'packages/board/board_ESP32-S3_AtomS3R.yaml'
|
||||
# file: 'packages/board/board_ESP32-S3_DevKitC-1_LED-38.yaml'
|
||||
# file: 'packages/board/board_ESP32-S3_DevKitC-1_LED-48.yaml'
|
||||
# file: 'packages/board/board_ESP32-S3_LilyGo-T-Connect.yaml'
|
||||
# file: 'packages/board/board_ESP32-S3_LilyGo-T-Connect-Pro.yaml'
|
||||
# file: 'packages/board/board_ESP32-S3_WS-ETH.yaml'
|
||||
# file: 'packages/board/board_ESP32-S3_WS-RS485-CAN.yaml'
|
||||
# file: 'packages/board/board_ESP32-S3_WS-Touch-LCD-4.3.yaml'
|
||||
# file: 'packages/board/board_ESP32-S3_WS-Touch-LCD-7.yaml'
|
||||
# file: 'packages/board/board_ESP32-S3_XIAO.yaml'
|
||||
# file: 'packages/board/board_ESP32-S3_YBoard.yaml'
|
||||
|
||||
# vars:
|
||||
# server_status_led_id: 'virtual_status_light' # led used to show status. Default = esp_light, set specific led or set to 'virtual_status_light' to disable
|
||||
# network_status_led_id: 'virtual_status_light' # led used to show status. Default = esp_light, set specific led or set to 'virtual_status_light' to disable
|
||||
|
||||
# +------------------------------------------------------------------------------+
|
||||
# | >>> Board Display
|
||||
# | >>> Uncomment the display that corresponds to your board
|
||||
# +------------------------------------------------------------------------------+
|
||||
|
||||
# board_display: !include
|
||||
# file: 'packages/board/board_options_display_128x128.yaml' # AtomS3 / AtomS3R display
|
||||
# file: 'packages/board/board_options_display_480x222.yaml' # LilyGo T-Connect Pro display
|
||||
# vars:
|
||||
# display_auto_next_page_interval: '5s'
|
||||
# display_rotation: '0' # 0/90/180/270 rotation angle in degrees
|
||||
|
||||
|
||||
|
||||
# +------------------------------------------------------------------------------+
|
||||
# | >>> Board Options
|
||||
# | >>> Uncomment your interfaces and options
|
||||
# +------------------------------------------------------------------------------+
|
||||
|
||||
# UART 1 (uart_id: uart_esp_1)
|
||||
uart_esp_1: !include packages/board/board_options_itf_uart_esp_1.yaml
|
||||
# UART 2 (uart_id: uart_esp_2)
|
||||
# uart_esp_2: !include packages/board/board_options_itf_uart_esp_2.yaml
|
||||
# UART 3 (uart_id: uart_esp_3)
|
||||
# uart_esp_3: !include packages/board/board_options_itf_uart_esp_3.yaml
|
||||
|
||||
# UART flow control
|
||||
# uart_flow_control: !include
|
||||
# file: packages/board/board_options_itf_uart_flow_control.yaml
|
||||
# vars:
|
||||
# uart_id: 'uart_esp_1'
|
||||
# uart_flow_control_pin: ${talk_pin}
|
||||
|
||||
# CAN transceiver - ESP32_CAN (TJA105x, SN65HVD230, M5Stack CAN base/unit)
|
||||
canbus_node_1: !include
|
||||
file: packages/board/board_options_itf_canbus_esp32_can.yaml
|
||||
vars:
|
||||
# to bms = canbus_bms_1
|
||||
# to inverter = canbus_inverter_1
|
||||
canbus_node_id: 'canbus_inverter_1'
|
||||
|
||||
# CAN transceiver - MCP2515
|
||||
# canbus_node_2: !include
|
||||
# file: packages/board/board_options_itf_canbus_mcp2515.yaml
|
||||
# vars:
|
||||
# # to bms = canbus_bms_1
|
||||
# # to inverter = canbus_inverter_1
|
||||
# canbus_node_id: 'canbus_inverter_1'
|
||||
|
||||
# PSRAM octal 80Mhz
|
||||
# psram_octal_80Mhz: !include packages/board/board_options_PSRAM_octal_80Mhz.yaml
|
||||
|
||||
# Web Server
|
||||
# web_server: !include packages/yambms/yambms_web_server.yaml
|
||||
|
||||
# WiFi AP @ 192.168.4.1
|
||||
# wifi_ap: !include packages/board/board_options_wifi_ap.yaml
|
||||
|
||||
# Captive Portal @ 192.168.4.1
|
||||
# captive_portal: !include packages/board/board_options_captive_portal.yaml
|
||||
|
||||
|
||||
|
||||
# +------------------------------------------------------------------------------+
|
||||
# | >>> BMS / Balancer / Shunt
|
||||
# +------------------------------------------------------------------------------+
|
||||
|
||||
# You don't have to import a shunt but you must import at least one BMS.
|
||||
# You can mix different BMS models, the only condition is that the `bms_id` are numbered in order starting from 1 !
|
||||
|
||||
# >>> Copy your BMS / Balancer / Shunt packages here
|
||||
# >>> You can find examples at this address :
|
||||
# >>> https://github.com/Sleeper85/esphome-yambms/tree/main/examples/single-node/
|
||||
|
||||
shunt1: !include
|
||||
file: packages/shunt/shunt_combine_FAKE.yaml
|
||||
vars:
|
||||
shunt_id: '1' # must be a number
|
||||
shunt_name: 'Shunt 1'
|
||||
# Shunt sensors values
|
||||
shunt_voltage: '52.81' # V
|
||||
shunt_current: '17.5' # A
|
||||
shunt_power: '924' # W
|
||||
shunt_soc: '50' # %
|
||||
shunt_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable
|
||||
|
||||
bms1: !include
|
||||
file: packages/bms/bms_combine_DEMO.yaml
|
||||
vars:
|
||||
bms_id: '1' # must be a number
|
||||
bms_name: 'BMS 1'
|
||||
# BMS sensors values
|
||||
bms_battery_capacity: '280' # Ah
|
||||
bms_current: '9.2' # A
|
||||
bms_soc: '87' # %
|
||||
bms_soh: '98' # %
|
||||
bms_min_cell_voltage: '3.339' # V
|
||||
bms_max_cell_voltage: '3.341' # V
|
||||
bms_min_temperature: '9.1' # °C
|
||||
bms_max_temperature: '9.3' # °C
|
||||
bms_max_charge_current: '100' # A
|
||||
bms_max_discharge_current: '100' # A
|
||||
bms_cell_ovp: '3.650' # V Used by 'Auto CCL' functions
|
||||
bms_cell_uvp: '2.800' # V Used by 'Auto DCL' functions and to calculate maximum discharge voltage
|
||||
bms_balance_trigger_voltage: '0.010' # V Used by 'Auto CVL' functions
|
||||
bms_charging_cycles: '178' # charging cycles number Used to calculate the SoH
|
||||
bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable
|
||||
|
||||
bms2: !include
|
||||
file: packages/bms/bms_combine_DEMO.yaml
|
||||
vars:
|
||||
bms_id: '2' # must be a number
|
||||
bms_name: 'BMS 2'
|
||||
# BMS sensors values
|
||||
bms_battery_capacity: '280' # Ah
|
||||
bms_current: '11.3' # A
|
||||
bms_soc: '85' # %
|
||||
bms_soh: '89' # %
|
||||
bms_min_cell_voltage: '3.337' # V
|
||||
bms_max_cell_voltage: '3.339' # V
|
||||
bms_min_temperature: '15.1' # °C
|
||||
bms_max_temperature: '15.3' # °C
|
||||
bms_max_charge_current: '100' # A
|
||||
bms_max_discharge_current: '100' # A
|
||||
bms_cell_ovp: '3.650' # V Used by 'Auto CCL' functions
|
||||
bms_cell_uvp: '2.800' # V Used by 'Auto DCL' functions and to calculate maximum discharge voltage
|
||||
bms_balance_trigger_voltage: '0.010' # V Used by 'Auto CVL' functions
|
||||
bms_charging_cycles: '226' # charging cycles number Used to calculate the SoH
|
||||
bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable
|
||||
|
||||
bms3: !include
|
||||
file: packages/bms/bms_combine_DEMO.yaml
|
||||
vars:
|
||||
bms_id: '3' # must be a number
|
||||
bms_name: 'BMS 3'
|
||||
# BMS sensors values
|
||||
bms_battery_capacity: '280' # Ah
|
||||
bms_current: '15.7' # A
|
||||
bms_soc: '83' # %
|
||||
bms_soh: '79' # %
|
||||
bms_min_cell_voltage: '3.334' # V
|
||||
bms_max_cell_voltage: '3.336' # V
|
||||
bms_min_temperature: '20.1' # °C
|
||||
bms_max_temperature: '20.3' # °C
|
||||
bms_max_charge_current: '100' # A
|
||||
bms_max_discharge_current: '100' # A
|
||||
bms_cell_ovp: '3.650' # V Used by 'Auto CCL' functions
|
||||
bms_cell_uvp: '2.800' # V Used by 'Auto DCL' functions and to calculate maximum discharge voltage
|
||||
bms_balance_trigger_voltage: '0.010' # V Used by 'Auto CVL' functions
|
||||
bms_charging_cycles: '194' # charging cycles number Used to calculate the SoH
|
||||
bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable
|
||||
|
||||
|
||||
|
||||
# +------------------------------------------------------------------------------+
|
||||
# | >>> YamBMS
|
||||
# +------------------------------------------------------------------------------+
|
||||
|
||||
yambms: !include packages/yambms/yambms.yaml
|
||||
|
||||
|
||||
|
||||
# +------------------------------------------------------------------------------+
|
||||
# | >>> CAN bus to Inverter
|
||||
# +------------------------------------------------------------------------------+
|
||||
|
||||
canbus1: !include
|
||||
file: packages/yambms/yambms_canbus.yaml # yambms_canbus_web_server.yaml
|
||||
vars:
|
||||
canbus_id: '1' # Must be a number
|
||||
canbus_name: 'CANBUS 1'
|
||||
canbus_node_id: 'canbus_inverter_1' # CAN bus node to which your inverter is connected
|
||||
canbus_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable
|
||||
# The CAN bus link will be paused for `30s` if the inverter does not respond with an ACK (can_id 0x305)
|
||||
# before the end of the `canbus_link_timer` (5s by default).
|
||||
canbus_link_timer: '5s'
|
||||
canbus_extended_ack: 'false' # Set to 'true' for enable extended 29-bit IDs for the ACK can_id 0x305 (required for Schneider XW Pro)
|
||||
|
||||
|
||||
|
||||
# +------------------------------------------------------------------------------+
|
||||
# | >>> RS485 bus to Inverter
|
||||
# +------------------------------------------------------------------------------+
|
||||
|
||||
# rs485_pylon: !include
|
||||
# file: packages/yambms/yambms_rs485_pylon.yaml # yambms_rs485_pylon_web_server.yaml
|
||||
# vars:
|
||||
# rs485_id: '1' # Must be a number
|
||||
# rs485_name: 'RS485 1'
|
||||
# rs485_uart_id: 'uart_esp_3' # UART interface to which your inverter is connected
|
||||
# rs485_uart_baud_rate: '9600'
|
||||
# rs485_update_timeout: '5s'
|
||||
# rs485_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable
|
||||
|
||||
|
||||
|
||||
# +------------------------------------------------------------------------------+
|
||||
# | >>> DEBUG ( logger level must be DEBUG )
|
||||
# +------------------------------------------------------------------------------+
|
||||
|
||||
device_debug: !include
|
||||
file: packages/base/device_debug_ESP32.yaml
|
||||
# file: packages/base/device_debug_ESP32_PSRAM.yaml
|
||||
vars:
|
||||
debug_name: 'Debug'
|
||||
debug_update_interval: '5s'
|
||||
# Size of your PSRAM in bits
|
||||
# 8Mb='8388608' | 6Mb='6291456' | 4Mb='4194304' | 2Mb='2097152' | NoPSRAM='0'
|
||||
debug_psram_size: '8388608'
|
||||
|
||||
|
||||
|
||||
# +------------------------------------------------------------------------------+
|
||||
# | >>> Config and Custom Local Packages
|
||||
# +------------------------------------------------------------------------------+
|
||||
|
||||
# Local Packages intended for creating custom codes
|
||||
# or sharing settings between several main.yaml
|
||||
|
||||
# yambms_config: !include yambms_config.yaml
|
||||
# yambms_custom: !include yambms_custom.yaml
|
||||
@@ -1,4 +1,4 @@
|
||||
# Updated : 2026.02.05
|
||||
# Updated : 2026.02.16
|
||||
# Version : 1.7.0
|
||||
# GitHub : https://github.com/Sleeper85/esphome-yambms
|
||||
|
||||
@@ -259,10 +259,11 @@ packages:
|
||||
canbus_id: '1' # Must be a number
|
||||
canbus_name: 'CANBUS 1'
|
||||
canbus_node_id: 'canbus_inverter_1' # CAN bus node to which your inverter is connected
|
||||
canbus_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable
|
||||
# The CANBUS link will be considered down if no response from the inverter (ID 0x305) for 5s
|
||||
# The Deye inverter sends the ACK (can_id 0x305) only when it receives the can_id 0x356
|
||||
canbus_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable
|
||||
# The CAN bus link will be paused for `30s` if the inverter does not respond with an ACK (can_id 0x305)
|
||||
# before the end of the `canbus_link_timer` (5s by default).
|
||||
canbus_link_timer: '5s'
|
||||
canbus_extended_ack: 'false' # Set to 'true' for enable extended 29-bit IDs for the ACK can_id 0x305 (required for Schneider XW Pro)
|
||||
|
||||
|
||||
|
||||
@@ -278,7 +279,7 @@ packages:
|
||||
# rs485_uart_id: 'uart_esp_3' # UART interface to which your inverter is connected
|
||||
# rs485_uart_baud_rate: '9600'
|
||||
# rs485_update_timeout: '5s'
|
||||
# rs485_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable
|
||||
# rs485_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable
|
||||
|
||||
|
||||
# +------------------------------------------------------------------------------+
|
||||
|
||||
@@ -1,4 +1,4 @@
|
||||
# Updated : 2026.02.05
|
||||
# Updated : 2026.02.16
|
||||
# Version : 1.7.0
|
||||
# GitHub : https://github.com/Sleeper85/esphome-yambms
|
||||
|
||||
@@ -172,6 +172,7 @@ packages:
|
||||
# file: 'packages/board/board_ESP32-C3_DevKitM-1.yaml'
|
||||
# file: 'packages/board/board_ESP32-C3_ETH01-EVO.yaml'
|
||||
# file: 'packages/board/board_ESP32-C3_FlipC3.yaml'
|
||||
# file: 'packages/board/board_ESP32-S3_Generic.yaml'
|
||||
# file: 'packages/board/board_ESP32-S3_AtomS3-Lite.yaml'
|
||||
# file: 'packages/board/board_ESP32-S3_AtomS3.yaml'
|
||||
# file: 'packages/board/board_ESP32-S3_AtomS3R.yaml'
|
||||
@@ -284,10 +285,11 @@ packages:
|
||||
canbus_id: '1' # Must be a number
|
||||
canbus_name: 'CANBUS 1'
|
||||
canbus_node_id: 'canbus_inverter_1' # CAN bus node to which your inverter is connected
|
||||
canbus_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable
|
||||
# The CANBUS link will be considered down if no response from the inverter (ID 0x305) for 5s
|
||||
# The Deye inverter sends the ACK (can_id 0x305) only when it receives the can_id 0x356
|
||||
canbus_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable
|
||||
# The CAN bus link will be paused for `30s` if the inverter does not respond with an ACK (can_id 0x305)
|
||||
# before the end of the `canbus_link_timer` (5s by default).
|
||||
canbus_link_timer: '5s'
|
||||
canbus_extended_ack: 'false' # Set to 'true' for enable extended 29-bit IDs for the ACK can_id 0x305 (required for Schneider XW Pro)
|
||||
|
||||
|
||||
|
||||
@@ -303,7 +305,7 @@ packages:
|
||||
# rs485_uart_id: 'uart_esp_3' # UART interface to which your inverter is connected
|
||||
# rs485_uart_baud_rate: '9600'
|
||||
# rs485_update_timeout: '5s'
|
||||
# rs485_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable
|
||||
# rs485_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable
|
||||
|
||||
|
||||
|
||||
|
||||
@@ -1,4 +1,4 @@
|
||||
# Updated : 2026.02.05
|
||||
# Updated : 2026.02.16
|
||||
# Version : 1.7.0
|
||||
# GitHub : https://github.com/Sleeper85/esphome-yambms
|
||||
|
||||
@@ -174,6 +174,7 @@ packages:
|
||||
# - path: 'packages/board/board_ESP32-C3_DevKitM-1.yaml'
|
||||
# - path: 'packages/board/board_ESP32-C3_ETH01-EVO.yaml'
|
||||
# - path: 'packages/board/board_ESP32-C3_FlipC3.yaml'
|
||||
# - path: 'packages/board/board_ESP32-S3_Generic.yaml'
|
||||
# - path: 'packages/board/board_ESP32-S3_AtomS3-Lite.yaml'
|
||||
# - path: 'packages/board/board_ESP32-S3_AtomS3.yaml'
|
||||
# - path: 'packages/board/board_ESP32-S3_AtomS3R.yaml'
|
||||
@@ -271,21 +272,21 @@ packages:
|
||||
basen_uart_id: 'uart_esp_1'
|
||||
basen_uart_baud_rate: '9600'
|
||||
basen_controller_id: "basen_controller_1"
|
||||
bms_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable
|
||||
bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable
|
||||
# Basen module 1
|
||||
- path: packages/bms/bms_combine_BASEN_RS485_full.yaml
|
||||
vars:
|
||||
bms_id: '1' # must be a number
|
||||
bms_name: 'BASEN-BMS 1'
|
||||
bms_address: '0x01'
|
||||
bms_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable
|
||||
bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable
|
||||
# Basen module 2
|
||||
- path: packages/bms/bms_combine_BASEN_RS485_full.yaml
|
||||
vars:
|
||||
bms_id: '2' # must be a number
|
||||
bms_name: 'BASEN-BMS 2'
|
||||
bms_address: '0x02'
|
||||
bms_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable
|
||||
bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable
|
||||
|
||||
|
||||
|
||||
@@ -303,13 +304,14 @@ packages:
|
||||
|
||||
- path: 'packages/yambms/yambms_canbus.yaml' # yambms_canbus_web_server.yaml
|
||||
vars:
|
||||
canbus_id: '1' # Must be a number
|
||||
canbus_id: '1' # must be a number
|
||||
canbus_name: 'CANBUS 1'
|
||||
canbus_node_id: 'canbus_inverter_1' # CAN bus node to which your inverter is connected
|
||||
canbus_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable
|
||||
# The CANBUS link will be considered down if no response from the inverter (ID 0x305) for 5s
|
||||
# The Deye inverter sends the ACK (can_id 0x305) only when it receives the can_id 0x356
|
||||
canbus_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable
|
||||
# The CAN bus link will be paused for `30s` if the inverter does not respond with an ACK (can_id 0x305)
|
||||
# before the end of the `canbus_link_timer` (5s by default).
|
||||
canbus_link_timer: '5s'
|
||||
canbus_extended_ack: 'false' # Set to 'true' for enable extended 29-bit IDs (required for Schneider XW Pro)
|
||||
|
||||
|
||||
|
||||
@@ -324,7 +326,7 @@ packages:
|
||||
# rs485_uart_id: 'uart_esp_3' # UART interface to which your inverter is connected
|
||||
# rs485_uart_baud_rate: '9600'
|
||||
# rs485_update_timeout: '5s'
|
||||
# rs485_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable
|
||||
# rs485_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable
|
||||
|
||||
|
||||
|
||||
|
||||
@@ -1,4 +1,4 @@
|
||||
# Updated : 2026.02.05
|
||||
# Updated : 2026.02.16
|
||||
# Version : 1.7.0
|
||||
# GitHub : https://github.com/Sleeper85/esphome-yambms
|
||||
|
||||
@@ -174,6 +174,7 @@ packages:
|
||||
# - path: 'packages/board/board_ESP32-C3_DevKitM-1.yaml'
|
||||
# - path: 'packages/board/board_ESP32-C3_ETH01-EVO.yaml'
|
||||
# - path: 'packages/board/board_ESP32-C3_FlipC3.yaml'
|
||||
# - path: 'packages/board/board_ESP32-S3_Generic.yaml'
|
||||
# - path: 'packages/board/board_ESP32-S3_AtomS3-Lite.yaml'
|
||||
# - path: 'packages/board/board_ESP32-S3_AtomS3.yaml'
|
||||
# - path: 'packages/board/board_ESP32-S3_AtomS3R.yaml'
|
||||
@@ -283,7 +284,7 @@ packages:
|
||||
bms_name: 'DEYE-BMS 1'
|
||||
deye_id: '1'
|
||||
deye_module_id: '0' # Modules are numbered with 0-9
|
||||
bms_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable
|
||||
bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable
|
||||
# Deye module 2
|
||||
- path: 'packages/bms/bms_combine_DEYE_CAN_module_full.yaml'
|
||||
vars:
|
||||
@@ -294,7 +295,7 @@ packages:
|
||||
bms_id: '2' # must be a number
|
||||
bms_name: 'DEYE-BMS 2'
|
||||
deye_module_id: '1' # Modules are numbered with 0-9
|
||||
bms_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable
|
||||
bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable
|
||||
|
||||
|
||||
|
||||
@@ -312,13 +313,14 @@ packages:
|
||||
|
||||
- path: 'packages/yambms/yambms_canbus.yaml' # yambms_canbus_web_server.yaml
|
||||
vars:
|
||||
canbus_id: '1' # Must be a number
|
||||
canbus_id: '1' # must be a number
|
||||
canbus_name: 'CANBUS 1'
|
||||
canbus_node_id: 'canbus_inverter_1'
|
||||
canbus_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable
|
||||
# The CANBUS link will be considered down if no response from the inverter (ID 0x305) for 5s
|
||||
# The Deye inverter sends the ACK (can_id 0x305) only when it receives the can_id 0x356
|
||||
canbus_node_id: 'canbus_inverter_1' # CAN bus node to which your inverter is connected
|
||||
canbus_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable
|
||||
# The CAN bus link will be paused for `30s` if the inverter does not respond with an ACK (can_id 0x305)
|
||||
# before the end of the `canbus_link_timer` (5s by default).
|
||||
canbus_link_timer: '5s'
|
||||
canbus_extended_ack: 'false' # Set to 'true' for enable extended 29-bit IDs (required for Schneider XW Pro)
|
||||
|
||||
|
||||
|
||||
@@ -333,7 +335,7 @@ packages:
|
||||
# rs485_uart_id: 'uart_esp_3' # UART interface to which your inverter is connected
|
||||
# rs485_uart_baud_rate: '9600'
|
||||
# rs485_update_timeout: '5s'
|
||||
# rs485_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable
|
||||
# rs485_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable
|
||||
|
||||
|
||||
|
||||
|
||||
@@ -1,4 +1,4 @@
|
||||
# Updated : 2026.02.05
|
||||
# Updated : 2026.02.16
|
||||
# Version : 1.7.0
|
||||
# GitHub : https://github.com/Sleeper85/esphome-yambms
|
||||
|
||||
@@ -174,6 +174,7 @@ packages:
|
||||
# - path: 'packages/board/board_ESP32-C3_DevKitM-1.yaml'
|
||||
# - path: 'packages/board/board_ESP32-C3_ETH01-EVO.yaml'
|
||||
# - path: 'packages/board/board_ESP32-C3_FlipC3.yaml'
|
||||
# - path: 'packages/board/board_ESP32-S3_Generic.yaml'
|
||||
# - path: 'packages/board/board_ESP32-S3_AtomS3-Lite.yaml'
|
||||
# - path: 'packages/board/board_ESP32-S3_AtomS3.yaml'
|
||||
# - path: 'packages/board/board_ESP32-S3_AtomS3R.yaml'
|
||||
@@ -277,21 +278,21 @@ packages:
|
||||
bms_name: 'EG4-BMS 1'
|
||||
## BMS address must start at 2 with EG4 LLV2, ID 1 is a special case and has different output.
|
||||
bms_address: 2 # BMS 1 modbus address
|
||||
bms_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable
|
||||
bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable
|
||||
# BMS 2
|
||||
- path: 'packages/bms/bms_combine_EG4_LLV2_RS485_bms_full.yaml'
|
||||
vars:
|
||||
bms_id: '2' # must be a number
|
||||
bms_name: 'EG4-BMS 2'
|
||||
bms_address: 3 # BMS 2 modbus address
|
||||
bms_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable
|
||||
bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable
|
||||
# BMS 3
|
||||
- path: 'packages/bms/bms_combine_EG4_LLV2_RS485_bms_full.yaml'
|
||||
vars:
|
||||
bms_id: '3' # must be a number
|
||||
bms_name: 'EG4-BMS 3'
|
||||
bms_address: 4 # BMS 3 modbus address
|
||||
bms_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable
|
||||
bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable
|
||||
|
||||
|
||||
|
||||
@@ -309,13 +310,14 @@ packages:
|
||||
|
||||
- path: 'packages/yambms/yambms_canbus.yaml' # yambms_canbus_web_server.yaml
|
||||
vars:
|
||||
canbus_id: '1' # Must be a number
|
||||
canbus_id: '1' # must be a number
|
||||
canbus_name: 'CANBUS 1'
|
||||
canbus_node_id: 'canbus_inverter_1' # CAN bus node to which your inverter is connected
|
||||
canbus_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable
|
||||
# The CANBUS link will be considered down if no response from the inverter (ID 0x305) for 5s
|
||||
# The Deye inverter sends the ACK (can_id 0x305) only when it receives the can_id 0x356
|
||||
canbus_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable
|
||||
# The CAN bus link will be paused for `30s` if the inverter does not respond with an ACK (can_id 0x305)
|
||||
# before the end of the `canbus_link_timer` (5s by default).
|
||||
canbus_link_timer: '5s'
|
||||
canbus_extended_ack: 'false' # Set to 'true' for enable extended 29-bit IDs (required for Schneider XW Pro)
|
||||
|
||||
|
||||
|
||||
@@ -330,7 +332,7 @@ packages:
|
||||
# rs485_uart_id: 'uart_esp_3' # UART interface to which your inverter is connected
|
||||
# rs485_uart_baud_rate: '9600'
|
||||
# rs485_update_timeout: '5s'
|
||||
# rs485_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable
|
||||
# rs485_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable
|
||||
|
||||
|
||||
|
||||
|
||||
@@ -1,4 +1,4 @@
|
||||
# Updated : 2026.02.05
|
||||
# Updated : 2026.02.16
|
||||
# Version : 1.7.0
|
||||
# GitHub : https://github.com/Sleeper85/esphome-yambms
|
||||
|
||||
@@ -174,6 +174,7 @@ packages:
|
||||
# - path: 'packages/board/board_ESP32-C3_DevKitM-1.yaml'
|
||||
# - path: 'packages/board/board_ESP32-C3_ETH01-EVO.yaml'
|
||||
# - path: 'packages/board/board_ESP32-C3_FlipC3.yaml'
|
||||
# - path: 'packages/board/board_ESP32-S3_Generic.yaml'
|
||||
# - path: 'packages/board/board_ESP32-S3_AtomS3-Lite.yaml'
|
||||
# - path: 'packages/board/board_ESP32-S3_AtomS3.yaml'
|
||||
# - path: 'packages/board/board_ESP32-S3_AtomS3R.yaml'
|
||||
@@ -281,7 +282,7 @@ packages:
|
||||
bms_cell_ovp: '3.650' # V. Cell over-voltage protection
|
||||
bms_cell_uvp: '2.500' # V. Cell under-voltage protection
|
||||
bms_balance_trigger_voltage: '0.030' # V. Balance trigger voltage
|
||||
bms_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable
|
||||
bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable
|
||||
# BMS 2
|
||||
- path: 'packages/bms/bms_combine_Ecoworthy_RS485.yaml'
|
||||
vars:
|
||||
@@ -293,7 +294,7 @@ packages:
|
||||
bms_cell_ovp: '3.650' # V. Cell over-voltage protection
|
||||
bms_cell_uvp: '2.500' # V. Cell under-voltage protection
|
||||
bms_balance_trigger_voltage: '0.030' # V. Balance trigger voltage
|
||||
bms_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable
|
||||
bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable
|
||||
|
||||
|
||||
# +------------------------------------------------------------------------------+
|
||||
@@ -310,13 +311,14 @@ packages:
|
||||
|
||||
- path: 'packages/yambms/yambms_canbus.yaml' # yambms_canbus_web_server.yaml
|
||||
vars:
|
||||
canbus_id: '1' # Must be a number
|
||||
canbus_id: '1' # must be a number
|
||||
canbus_name: 'CANBUS 1'
|
||||
canbus_node_id: 'canbus_inverter_1' # CAN bus node to which your inverter is connected
|
||||
canbus_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable
|
||||
# The CANBUS link will be considered down if no response from the inverter (ID 0x305) for 5s
|
||||
# The Deye inverter sends the ACK (can_id 0x305) only when it receives the can_id 0x356
|
||||
canbus_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable
|
||||
# The CAN bus link will be paused for `30s` if the inverter does not respond with an ACK (can_id 0x305)
|
||||
# before the end of the `canbus_link_timer` (5s by default).
|
||||
canbus_link_timer: '5s'
|
||||
canbus_extended_ack: 'false' # Set to 'true' for enable extended 29-bit IDs (required for Schneider XW Pro)
|
||||
|
||||
|
||||
|
||||
@@ -331,7 +333,7 @@ packages:
|
||||
# rs485_uart_id: 'uart_esp_3' # UART interface to which your inverter is connected
|
||||
# rs485_uart_baud_rate: '9600'
|
||||
# rs485_update_timeout: '5s'
|
||||
# rs485_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable
|
||||
# rs485_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable
|
||||
|
||||
|
||||
# +------------------------------------------------------------------------------+
|
||||
|
||||
+10
-8
@@ -1,4 +1,4 @@
|
||||
# Updated : 2026.02.05
|
||||
# Updated : 2026.02.16
|
||||
# Version : 1.
|
||||
# GitHub : https://github.com/Sleeper85/esphome-yambms
|
||||
|
||||
@@ -174,6 +174,7 @@ packages:
|
||||
# - path: 'packages/board/board_ESP32-C3_DevKitM-1.yaml'
|
||||
# - path: 'packages/board/board_ESP32-C3_ETH01-EVO.yaml'
|
||||
# - path: 'packages/board/board_ESP32-C3_FlipC3.yaml'
|
||||
# - path: 'packages/board/board_ESP32-S3_Generic.yaml'
|
||||
# - path: 'packages/board/board_ESP32-S3_AtomS3-Lite.yaml'
|
||||
# - path: 'packages/board/board_ESP32-S3_AtomS3.yaml'
|
||||
# - path: 'packages/board/board_ESP32-S3_AtomS3R.yaml'
|
||||
@@ -283,7 +284,7 @@ packages:
|
||||
# Maximum cell charging cycles is used to calculate the battey SoH.
|
||||
# MB31=8000.0, LF280K v3=8000.0, LF280K v2=6000.0, LF280=3000.0 (decimal is required)
|
||||
bms_cell_max_cycles: '6000.0'
|
||||
bms_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable
|
||||
bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable
|
||||
# BMS 2
|
||||
- path: 'packages/bms/bms_combine_JBD_BLE_full.yaml'
|
||||
vars:
|
||||
@@ -301,7 +302,7 @@ packages:
|
||||
# Maximum cell charging cycles is used to calculate the battey SoH.
|
||||
# MB31=8000.0, LF280K v3=8000.0, LF280K v2=6000.0, LF280=3000.0 (decimal is required)
|
||||
bms_cell_max_cycles: '6000.0'
|
||||
bms_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable
|
||||
bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable
|
||||
|
||||
|
||||
|
||||
@@ -319,13 +320,14 @@ packages:
|
||||
|
||||
- path: 'packages/yambms/yambms_canbus.yaml' # yambms_canbus_web_server.yaml
|
||||
vars:
|
||||
canbus_id: '1' # Must be a number
|
||||
canbus_id: '1' # must be a number
|
||||
canbus_name: 'CANBUS 1'
|
||||
canbus_node_id: 'canbus_inverter_1' # CAN bus node to which your inverter is connected
|
||||
canbus_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable
|
||||
# The CANBUS link will be considered down if no response from the inverter (ID 0x305) for 5s
|
||||
# The Deye inverter sends the ACK (can_id 0x305) only when it receives the can_id 0x356
|
||||
canbus_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable
|
||||
# The CAN bus link will be paused for `30s` if the inverter does not respond with an ACK (can_id 0x305)
|
||||
# before the end of the `canbus_link_timer` (5s by default).
|
||||
canbus_link_timer: '5s'
|
||||
canbus_extended_ack: 'false' # Set to 'true' for enable extended 29-bit IDs (required for Schneider XW Pro)
|
||||
|
||||
|
||||
|
||||
@@ -340,7 +342,7 @@ packages:
|
||||
# rs485_uart_id: 'uart_esp_3' # UART interface to which your inverter is connected
|
||||
# rs485_uart_baud_rate: '9600'
|
||||
# rs485_update_timeout: '5s'
|
||||
# rs485_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable
|
||||
# rs485_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable
|
||||
|
||||
|
||||
|
||||
|
||||
@@ -1,4 +1,4 @@
|
||||
# Updated : 2026.02.05
|
||||
# Updated : 2026.02.16
|
||||
# Version : 1.7.0
|
||||
# GitHub : https://github.com/Sleeper85/esphome-yambms
|
||||
|
||||
@@ -174,6 +174,7 @@ packages:
|
||||
# - path: 'packages/board/board_ESP32-C3_DevKitM-1.yaml'
|
||||
# - path: 'packages/board/board_ESP32-C3_ETH01-EVO.yaml'
|
||||
# - path: 'packages/board/board_ESP32-C3_FlipC3.yaml'
|
||||
# - path: 'packages/board/board_ESP32-S3_Generic.yaml'
|
||||
# - path: 'packages/board/board_ESP32-S3_AtomS3-Lite.yaml'
|
||||
# - path: 'packages/board/board_ESP32-S3_AtomS3.yaml'
|
||||
# - path: 'packages/board/board_ESP32-S3_AtomS3R.yaml'
|
||||
@@ -282,56 +283,56 @@ packages:
|
||||
bms_id: '1' # must be a number
|
||||
bms_name: 'JK-BMS 1'
|
||||
bms_address: '0x01' # BMS 1 ( JK app `Device Addr.` setting )
|
||||
bms_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable
|
||||
bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable
|
||||
# BMS 2
|
||||
- path: 'packages/bms/bms_combine_JK_RS485_Modbus_JK-B_standard.yaml'
|
||||
vars:
|
||||
bms_id: '2' # must be a number
|
||||
bms_name: 'JK-BMS 2'
|
||||
bms_address: '0x02' # BMS 2 ( JK app `Device Addr.` setting )
|
||||
bms_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable
|
||||
bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable
|
||||
# BMS 3
|
||||
- path: 'packages/bms/bms_combine_JK_RS485_Modbus_JK-B_standard.yaml'
|
||||
vars:
|
||||
bms_id: '3' # must be a number
|
||||
bms_name: 'JK-BMS 3'
|
||||
bms_address: '0x03' # BMS 3 ( JK app `Device Addr.` setting )
|
||||
bms_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable
|
||||
bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable
|
||||
# BMS 4
|
||||
- path: 'packages/bms/bms_combine_JK_RS485_Modbus_JK-B_standard.yaml'
|
||||
vars:
|
||||
bms_id: '4' # must be a number
|
||||
bms_name: 'JK-BMS 4'
|
||||
bms_address: '0x04' # BMS 4 ( JK app `Device Addr.` setting )
|
||||
bms_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable
|
||||
bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable
|
||||
# BMS 5
|
||||
- path: 'packages/bms/bms_combine_JK_RS485_Modbus_JK-B_standard.yaml'
|
||||
vars:
|
||||
bms_id: '5' # must be a number
|
||||
bms_name: 'JK-BMS 5'
|
||||
bms_address: '0x05' # BMS 5 ( JK app `Device Addr.` setting )
|
||||
bms_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable
|
||||
bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable
|
||||
# BMS 6
|
||||
- path: 'packages/bms/bms_combine_JK_RS485_Modbus_JK-B_standard.yaml'
|
||||
vars:
|
||||
bms_id: '6' # must be a number
|
||||
bms_name: 'JK-BMS 6'
|
||||
bms_address: '0x06' # BMS 6 ( JK app `Device Addr.` setting )
|
||||
bms_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable
|
||||
bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable
|
||||
# BMS 7
|
||||
- path: 'packages/bms/bms_combine_JK_RS485_Modbus_JK-B_standard.yaml'
|
||||
vars:
|
||||
bms_id: '7' # must be a number
|
||||
bms_name: 'JK-BMS 7'
|
||||
bms_address: '0x07' # BMS 7 ( JK app `Device Addr.` setting )
|
||||
bms_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable
|
||||
bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable
|
||||
# BMS 8
|
||||
- path: 'packages/bms/bms_combine_JK_RS485_Modbus_JK-B_standard.yaml'
|
||||
vars:
|
||||
bms_id: '8' # must be a number
|
||||
bms_name: 'JK-BMS 8'
|
||||
bms_address: '0x08' # BMS 8 ( JK app `Device Addr.` setting )
|
||||
bms_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable
|
||||
bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable
|
||||
|
||||
|
||||
|
||||
@@ -349,13 +350,14 @@ packages:
|
||||
|
||||
- path: 'packages/yambms/yambms_canbus.yaml' # yambms_canbus_web_server.yaml
|
||||
vars:
|
||||
canbus_id: '1' # Must be a number
|
||||
canbus_id: '1' # must be a number
|
||||
canbus_name: 'CANBUS 1'
|
||||
canbus_node_id: 'canbus_inverter_1' # CAN bus node to which your inverter is connected
|
||||
canbus_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable
|
||||
# The CANBUS link will be considered down if no response from the inverter (ID 0x305) for 5s
|
||||
# The Deye inverter sends the ACK (can_id 0x305) only when it receives the can_id 0x356
|
||||
canbus_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable
|
||||
# The CAN bus link will be paused for `30s` if the inverter does not respond with an ACK (can_id 0x305)
|
||||
# before the end of the `canbus_link_timer` (5s by default).
|
||||
canbus_link_timer: '5s'
|
||||
canbus_extended_ack: 'false' # Set to 'true' for enable extended 29-bit IDs (required for Schneider XW Pro)
|
||||
|
||||
|
||||
|
||||
@@ -370,7 +372,7 @@ packages:
|
||||
# rs485_uart_id: 'uart_esp_3' # UART interface to which your inverter is connected
|
||||
# rs485_uart_baud_rate: '9600'
|
||||
# rs485_update_timeout: '5s'
|
||||
# rs485_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable
|
||||
# rs485_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable
|
||||
|
||||
|
||||
|
||||
|
||||
@@ -1,4 +1,4 @@
|
||||
# Updated : 2026.02.05
|
||||
# Updated : 2026.02.16
|
||||
# Version : 1.7.0
|
||||
# GitHub : https://github.com/Sleeper85/esphome-yambms
|
||||
|
||||
@@ -174,6 +174,7 @@ packages:
|
||||
# - path: 'packages/board/board_ESP32-C3_DevKitM-1.yaml'
|
||||
# - path: 'packages/board/board_ESP32-C3_ETH01-EVO.yaml'
|
||||
# - path: 'packages/board/board_ESP32-C3_FlipC3.yaml'
|
||||
# - path: 'packages/board/board_ESP32-S3_Generic.yaml'
|
||||
# - path: 'packages/board/board_ESP32-S3_AtomS3-Lite.yaml'
|
||||
# - path: 'packages/board/board_ESP32-S3_AtomS3.yaml'
|
||||
# - path: 'packages/board/board_ESP32-S3_AtomS3R.yaml'
|
||||
@@ -282,56 +283,56 @@ packages:
|
||||
bms_id: '1' # must be a number
|
||||
bms_name: 'JK-BMS 1'
|
||||
bms_address: '0x01' # BMS 1 DIP switch
|
||||
bms_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable
|
||||
bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable
|
||||
# BMS 2
|
||||
- path: 'packages/bms/bms_combine_JK_RS485_Modbus_bms_standard.yaml'
|
||||
vars:
|
||||
bms_id: '2' # must be a number
|
||||
bms_name: 'JK-BMS 2'
|
||||
bms_address: '0x02' # BMS 2 DIP switch
|
||||
bms_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable
|
||||
bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable
|
||||
# BMS 3
|
||||
- path: 'packages/bms/bms_combine_JK_RS485_Modbus_bms_standard.yaml'
|
||||
vars:
|
||||
bms_id: '3' # must be a number
|
||||
bms_name: 'JK-BMS 3'
|
||||
bms_address: '0x03' # BMS 3 DIP switch
|
||||
bms_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable
|
||||
bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable
|
||||
# BMS 4
|
||||
- path: 'packages/bms/bms_combine_JK_RS485_Modbus_bms_standard.yaml'
|
||||
vars:
|
||||
bms_id: '4' # must be a number
|
||||
bms_name: 'JK-BMS 4'
|
||||
bms_address: '0x04' # BMS 4 DIP switch
|
||||
bms_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable
|
||||
bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable
|
||||
# BMS 5
|
||||
- path: 'packages/bms/bms_combine_JK_RS485_Modbus_bms_standard.yaml'
|
||||
vars:
|
||||
bms_id: '5' # must be a number
|
||||
bms_name: 'JK-BMS 5'
|
||||
bms_address: '0x05' # BMS 5 DIP switch
|
||||
bms_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable
|
||||
bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable
|
||||
# BMS 6
|
||||
- path: 'packages/bms/bms_combine_JK_RS485_Modbus_bms_standard.yaml'
|
||||
vars:
|
||||
bms_id: '6' # must be a number
|
||||
bms_name: 'JK-BMS 6'
|
||||
bms_address: '0x06' # BMS 6 DIP switch
|
||||
bms_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable
|
||||
bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable
|
||||
# BMS 7
|
||||
- path: 'packages/bms/bms_combine_JK_RS485_Modbus_bms_standard.yaml'
|
||||
vars:
|
||||
bms_id: '7' # must be a number
|
||||
bms_name: 'JK-BMS 7'
|
||||
bms_address: '0x07' # BMS 7 DIP switch
|
||||
bms_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable
|
||||
bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable
|
||||
# BMS 8
|
||||
- path: 'packages/bms/bms_combine_JK_RS485_Modbus_bms_standard.yaml'
|
||||
vars:
|
||||
bms_id: '8' # must be a number
|
||||
bms_name: 'JK-BMS 8'
|
||||
bms_address: '0x08' # BMS 8 DIP switch
|
||||
bms_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable
|
||||
bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable
|
||||
|
||||
|
||||
|
||||
@@ -349,13 +350,14 @@ packages:
|
||||
|
||||
- path: 'packages/yambms/yambms_canbus.yaml' # yambms_canbus_web_server.yaml
|
||||
vars:
|
||||
canbus_id: '1' # Must be a number
|
||||
canbus_id: '1' # must be a number
|
||||
canbus_name: 'CANBUS 1'
|
||||
canbus_node_id: 'canbus_inverter_1' # CAN bus node to which your inverter is connected
|
||||
canbus_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable
|
||||
# The CANBUS link will be considered down if no response from the inverter (ID 0x305) for 5s
|
||||
# The Deye inverter sends the ACK (can_id 0x305) only when it receives the can_id 0x356
|
||||
canbus_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable
|
||||
# The CAN bus link will be paused for `30s` if the inverter does not respond with an ACK (can_id 0x305)
|
||||
# before the end of the `canbus_link_timer` (5s by default).
|
||||
canbus_link_timer: '5s'
|
||||
canbus_extended_ack: 'false' # Set to 'true' for enable extended 29-bit IDs (required for Schneider XW Pro)
|
||||
|
||||
|
||||
|
||||
@@ -370,7 +372,7 @@ packages:
|
||||
# rs485_uart_id: 'uart_esp_3' # UART interface to which your inverter is connected
|
||||
# rs485_uart_baud_rate: '9600'
|
||||
# rs485_update_timeout: '5s'
|
||||
# rs485_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable
|
||||
# rs485_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable
|
||||
|
||||
|
||||
|
||||
|
||||
@@ -1,4 +1,4 @@
|
||||
# Updated : 2026.02.05
|
||||
# Updated : 2026.02.16
|
||||
# Version : 1.7.0
|
||||
# GitHub : https://github.com/Sleeper85/esphome-yambms
|
||||
|
||||
@@ -174,6 +174,7 @@ packages:
|
||||
# - path: 'packages/board/board_ESP32-C3_DevKitM-1.yaml'
|
||||
# - path: 'packages/board/board_ESP32-C3_ETH01-EVO.yaml'
|
||||
# - path: 'packages/board/board_ESP32-C3_FlipC3.yaml'
|
||||
# - path: 'packages/board/board_ESP32-S3_Generic.yaml'
|
||||
# - path: 'packages/board/board_ESP32-S3_AtomS3-Lite.yaml'
|
||||
# - path: 'packages/board/board_ESP32-S3_AtomS3.yaml'
|
||||
# - path: 'packages/board/board_ESP32-S3_AtomS3R.yaml'
|
||||
@@ -275,7 +276,7 @@ packages:
|
||||
# Maximum cell charging cycles is used to calculate the battey SoH.
|
||||
# MB31=8000.0, LF280K v3=8000.0, LF280K v2=6000.0, LF280=3000.0 (decimal is required)
|
||||
bms_cell_max_cycles: '6000.0'
|
||||
bms_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable
|
||||
bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable
|
||||
# BMS 2
|
||||
- path: 'packages/bms/bms_combine_JK_BLE_standard.yaml'
|
||||
vars:
|
||||
@@ -286,7 +287,7 @@ packages:
|
||||
# Maximum cell charging cycles is used to calculate the battey SoH.
|
||||
# MB31=8000.0, LF280K v3=8000.0, LF280K v2=6000.0, LF280=3000.0 (decimal is required)
|
||||
bms_cell_max_cycles: '6000.0'
|
||||
bms_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable
|
||||
bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable
|
||||
|
||||
|
||||
|
||||
@@ -304,13 +305,14 @@ packages:
|
||||
|
||||
- path: 'packages/yambms/yambms_canbus.yaml' # yambms_canbus_web_server.yaml
|
||||
vars:
|
||||
canbus_id: '1' # Must be a number
|
||||
canbus_id: '1' # must be a number
|
||||
canbus_name: 'CANBUS 1'
|
||||
canbus_node_id: 'canbus_inverter_1' # CAN bus node to which your inverter is connected
|
||||
canbus_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable
|
||||
# The CANBUS link will be considered down if no response from the inverter (ID 0x305) for 5s
|
||||
# The Deye inverter sends the ACK (can_id 0x305) only when it receives the can_id 0x356
|
||||
canbus_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable
|
||||
# The CAN bus link will be paused for `30s` if the inverter does not respond with an ACK (can_id 0x305)
|
||||
# before the end of the `canbus_link_timer` (5s by default).
|
||||
canbus_link_timer: '5s'
|
||||
canbus_extended_ack: 'false' # Set to 'true' for enable extended 29-bit IDs (required for Schneider XW Pro)
|
||||
|
||||
|
||||
|
||||
@@ -325,7 +327,7 @@ packages:
|
||||
# rs485_uart_id: 'uart_esp_3' # UART interface to which your inverter is connected
|
||||
# rs485_uart_baud_rate: '9600'
|
||||
# rs485_update_timeout: '5s'
|
||||
# rs485_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable
|
||||
# rs485_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable
|
||||
|
||||
|
||||
|
||||
|
||||
@@ -1,4 +1,4 @@
|
||||
# Updated : 2026.02.05
|
||||
# Updated : 2026.02.16
|
||||
# Version : 1.7.0
|
||||
# GitHub : https://github.com/Sleeper85/esphome-yambms
|
||||
|
||||
@@ -174,6 +174,7 @@ packages:
|
||||
# - path: 'packages/board/board_ESP32-C3_DevKitM-1.yaml'
|
||||
# - path: 'packages/board/board_ESP32-C3_ETH01-EVO.yaml'
|
||||
# - path: 'packages/board/board_ESP32-C3_FlipC3.yaml'
|
||||
# - path: 'packages/board/board_ESP32-S3_Generic.yaml'
|
||||
# - path: 'packages/board/board_ESP32-S3_AtomS3-Lite.yaml'
|
||||
# - path: 'packages/board/board_ESP32-S3_AtomS3.yaml'
|
||||
# - path: 'packages/board/board_ESP32-S3_AtomS3R.yaml'
|
||||
@@ -274,7 +275,7 @@ packages:
|
||||
# Maximum cell charging cycles is used to calculate the battey SoH.
|
||||
# MB31=8000.0, LF280K v3=8000.0, LF280K v2=6000.0, LF280=3000.0 (decimal is required)
|
||||
bms_cell_max_cycles: '6000.0'
|
||||
bms_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable
|
||||
bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable
|
||||
# BMS 2
|
||||
- path: 'packages/bms/bms_combine_JK_UART_4G-GPS_full.yaml'
|
||||
vars:
|
||||
@@ -284,7 +285,7 @@ packages:
|
||||
# Maximum cell charging cycles is used to calculate the battey SoH.
|
||||
# MB31=8000.0, LF280K v3=8000.0, LF280K v2=6000.0, LF280=3000.0 (decimal is required)
|
||||
bms_cell_max_cycles: '6000.0'
|
||||
bms_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable
|
||||
bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable
|
||||
|
||||
|
||||
|
||||
@@ -302,13 +303,14 @@ packages:
|
||||
|
||||
- path: 'packages/yambms/yambms_canbus.yaml' # yambms_canbus_web_server.yaml
|
||||
vars:
|
||||
canbus_id: '1' # Must be a number
|
||||
canbus_id: '1' # must be a number
|
||||
canbus_name: 'CANBUS 1'
|
||||
canbus_node_id: 'canbus_inverter_1' # CAN bus node to which your inverter is connected
|
||||
canbus_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable
|
||||
# The CANBUS link will be considered down if no response from the inverter (ID 0x305) for 5s
|
||||
# The Deye inverter sends the ACK (can_id 0x305) only when it receives the can_id 0x356
|
||||
canbus_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable
|
||||
# The CAN bus link will be paused for `30s` if the inverter does not respond with an ACK (can_id 0x305)
|
||||
# before the end of the `canbus_link_timer` (5s by default).
|
||||
canbus_link_timer: '5s'
|
||||
canbus_extended_ack: 'false' # Set to 'true' for enable extended 29-bit IDs (required for Schneider XW Pro)
|
||||
|
||||
|
||||
|
||||
@@ -323,7 +325,7 @@ packages:
|
||||
# rs485_uart_id: 'uart_esp_3' # UART interface to which your inverter is connected
|
||||
# rs485_uart_baud_rate: '9600'
|
||||
# rs485_update_timeout: '5s'
|
||||
# rs485_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable
|
||||
# rs485_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable
|
||||
|
||||
|
||||
|
||||
|
||||
@@ -1,4 +1,4 @@
|
||||
# Updated : 2026.02.05
|
||||
# Updated : 2026.02.16
|
||||
# Version : 1.7.0
|
||||
# GitHub : https://github.com/Sleeper85/esphome-yambms
|
||||
|
||||
@@ -174,6 +174,7 @@ packages:
|
||||
# - path: 'packages/board/board_ESP32-C3_DevKitM-1.yaml'
|
||||
# - path: 'packages/board/board_ESP32-C3_ETH01-EVO.yaml'
|
||||
# - path: 'packages/board/board_ESP32-C3_FlipC3.yaml'
|
||||
# - path: 'packages/board/board_ESP32-S3_Generic.yaml'
|
||||
# - path: 'packages/board/board_ESP32-S3_AtomS3-Lite.yaml'
|
||||
# - path: 'packages/board/board_ESP32-S3_AtomS3.yaml'
|
||||
# - path: 'packages/board/board_ESP32-S3_AtomS3R.yaml'
|
||||
@@ -275,13 +276,13 @@ packages:
|
||||
vars:
|
||||
bms_id: '1' # BMS id and modbus address
|
||||
bms_name: 'PACE-BMS 1'
|
||||
bms_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable
|
||||
bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable
|
||||
# BMS 2
|
||||
- path: 'packages/bms/bms_combine_PACE_RS485_bms_full.yaml'
|
||||
vars:
|
||||
bms_id: '2' # BMS id and modbus address
|
||||
bms_name: 'PACE-BMS 2'
|
||||
bms_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable
|
||||
bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable
|
||||
|
||||
|
||||
|
||||
@@ -299,13 +300,14 @@ packages:
|
||||
|
||||
- path: 'packages/yambms/yambms_canbus.yaml' # yambms_canbus_web_server.yaml
|
||||
vars:
|
||||
canbus_id: '1' # Must be a number
|
||||
canbus_id: '1' # must be a number
|
||||
canbus_name: 'CANBUS 1'
|
||||
canbus_node_id: 'canbus_inverter_1' # CAN bus node to which your inverter is connected
|
||||
canbus_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable
|
||||
# The CANBUS link will be considered down if no response from the inverter (ID 0x305) for 5s
|
||||
# The Deye inverter sends the ACK (can_id 0x305) only when it receives the can_id 0x356
|
||||
canbus_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable
|
||||
# The CAN bus link will be paused for `30s` if the inverter does not respond with an ACK (can_id 0x305)
|
||||
# before the end of the `canbus_link_timer` (5s by default).
|
||||
canbus_link_timer: '5s'
|
||||
canbus_extended_ack: 'false' # Set to 'true' for enable extended 29-bit IDs (required for Schneider XW Pro)
|
||||
|
||||
|
||||
|
||||
@@ -320,7 +322,7 @@ packages:
|
||||
# rs485_uart_id: 'uart_esp_3' # UART interface to which your inverter is connected
|
||||
# rs485_uart_baud_rate: '9600'
|
||||
# rs485_update_timeout: '5s'
|
||||
# rs485_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable
|
||||
# rs485_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable
|
||||
|
||||
|
||||
|
||||
|
||||
@@ -1,4 +1,4 @@
|
||||
# Updated : 2026.02.05
|
||||
# Updated : 2026.02.16
|
||||
# Version : 1.7.0
|
||||
# GitHub : https://github.com/Sleeper85/esphome-yambms
|
||||
|
||||
@@ -174,6 +174,7 @@ packages:
|
||||
# - path: 'packages/board/board_ESP32-C3_DevKitM-1.yaml'
|
||||
# - path: 'packages/board/board_ESP32-C3_ETH01-EVO.yaml'
|
||||
# - path: 'packages/board/board_ESP32-C3_FlipC3.yaml'
|
||||
# - path: 'packages/board/board_ESP32-S3_Generic.yaml'
|
||||
# - path: 'packages/board/board_ESP32-S3_AtomS3-Lite.yaml'
|
||||
# - path: 'packages/board/board_ESP32-S3_AtomS3.yaml'
|
||||
# - path: 'packages/board/board_ESP32-S3_AtomS3R.yaml'
|
||||
@@ -285,7 +286,7 @@ packages:
|
||||
bms_cell_ovp: '3.650' # V. Used by 'Auto CCL' functions
|
||||
bms_cell_uvp: '2.800' # V. Used by 'Auto DCL' functions and to calculate maximum discharge voltage
|
||||
bms_balance_trigger_voltage: '0.010' # V. Used by 'Auto CVL' functions
|
||||
bms_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable
|
||||
bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable
|
||||
# BMS 2
|
||||
- path: 'packages/bms/bms_combine_SEPLOS_V1_V2_RS485_bms_full.yaml'
|
||||
vars:
|
||||
@@ -301,7 +302,7 @@ packages:
|
||||
bms_cell_ovp: '3.650' # V. Used by 'Auto CCL' functions
|
||||
bms_cell_uvp: '2.800' # V. Used by 'Auto DCL' functions and to calculate maximum discharge voltage
|
||||
bms_balance_trigger_voltage: '0.010' # V. Used by 'Auto CVL' functions
|
||||
bms_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable
|
||||
bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable
|
||||
# BMS 3
|
||||
- path: 'packages/bms/bms_combine_SEPLOS_V1_V2_RS485_bms_full.yaml'
|
||||
vars:
|
||||
@@ -317,7 +318,7 @@ packages:
|
||||
bms_cell_ovp: '3.650' # V. Used by 'Auto CCL' functions
|
||||
bms_cell_uvp: '2.800' # V. Used by 'Auto DCL' functions and to calculate maximum discharge voltage
|
||||
bms_balance_trigger_voltage: '0.010' # V. Used by 'Auto CVL' functions
|
||||
bms_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable
|
||||
bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable
|
||||
|
||||
|
||||
|
||||
@@ -335,13 +336,14 @@ packages:
|
||||
|
||||
- path: 'packages/yambms/yambms_canbus.yaml' # yambms_canbus_web_server.yaml
|
||||
vars:
|
||||
canbus_id: '1' # Must be a number
|
||||
canbus_id: '1' # must be a number
|
||||
canbus_name: 'CANBUS 1'
|
||||
canbus_node_id: 'canbus_inverter_1' # CAN bus node to which your inverter is connected
|
||||
canbus_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable
|
||||
# The CANBUS link will be considered down if no response from the inverter (ID 0x305) for 5s
|
||||
# The Deye inverter sends the ACK (can_id 0x305) only when it receives the can_id 0x356
|
||||
canbus_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable
|
||||
# The CAN bus link will be paused for `30s` if the inverter does not respond with an ACK (can_id 0x305)
|
||||
# before the end of the `canbus_link_timer` (5s by default).
|
||||
canbus_link_timer: '5s'
|
||||
canbus_extended_ack: 'false' # Set to 'true' for enable extended 29-bit IDs (required for Schneider XW Pro)
|
||||
|
||||
|
||||
|
||||
@@ -356,7 +358,7 @@ packages:
|
||||
# rs485_uart_id: 'uart_esp_3' # UART interface to which your inverter is connected
|
||||
# rs485_uart_baud_rate: '9600'
|
||||
# rs485_update_timeout: '5s'
|
||||
# rs485_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable
|
||||
# rs485_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable
|
||||
|
||||
|
||||
|
||||
|
||||
@@ -1,4 +1,4 @@
|
||||
# Updated : 2026.02.05
|
||||
# Updated : 2026.02.16
|
||||
# Version : 1.7.0
|
||||
# GitHub : https://github.com/Sleeper85/esphome-yambms
|
||||
|
||||
@@ -174,6 +174,7 @@ packages:
|
||||
# - path: 'packages/board/board_ESP32-C3_DevKitM-1.yaml'
|
||||
# - path: 'packages/board/board_ESP32-C3_ETH01-EVO.yaml'
|
||||
# - path: 'packages/board/board_ESP32-C3_FlipC3.yaml'
|
||||
# - path: 'packages/board/board_ESP32-S3_Generic.yaml'
|
||||
# - path: 'packages/board/board_ESP32-S3_AtomS3-Lite.yaml'
|
||||
# - path: 'packages/board/board_ESP32-S3_AtomS3.yaml'
|
||||
# - path: 'packages/board/board_ESP32-S3_AtomS3R.yaml'
|
||||
@@ -273,44 +274,50 @@ packages:
|
||||
seplos_bms_count: '3' # Seplos V3 BMS count
|
||||
seplos_update_interval: '3' # # Time in seconds, update interval for all data points
|
||||
# BMS 1
|
||||
- path: 'packages/bms/bms_combine_SEPLOS_V3_RS485_sniffer_bms_full.yaml'
|
||||
- path: 'packages/bms/bms_combine_SEPLOS_V3_RS485_bms_full.yaml'
|
||||
vars:
|
||||
bms_id: '1'
|
||||
bms_prefix: 'bms0' # DON'T CHANGE THIS NAME !
|
||||
bms_name: 'SEPLOS-BMS 1'
|
||||
# Required settings cannot be retrieved from BMS
|
||||
# These values must match your BMS settings
|
||||
bms_max_charge_current: '100' # A. The maximum current your BMS can handle
|
||||
bms_max_discharge_current: '100' # A. The maximum current your BMS can handle
|
||||
# LFP values example
|
||||
bms_cell_ovp: '3.650' # V. Used by 'Auto CCL' functions
|
||||
bms_cell_uvp: '2.800' # V. Used by 'Auto DCL' functions and to calculate maximum discharge voltage
|
||||
bms_balance_trigger_voltage: '0.010' # V. Used by 'Auto CVL' functions
|
||||
bms_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable
|
||||
bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable
|
||||
# BMS 2
|
||||
- path: 'packages/bms/bms_combine_SEPLOS_V3_RS485_sniffer_bms_full.yaml'
|
||||
- path: 'packages/bms/bms_combine_SEPLOS_V3_RS485_bms_full.yaml'
|
||||
vars:
|
||||
bms_id: '2'
|
||||
bms_prefix: 'bms1' # DON'T CHANGE THIS NAME !
|
||||
bms_name: 'SEPLOS-BMS 2'
|
||||
# Required settings cannot be retrieved from BMS
|
||||
bms_max_charge_current: '100' # A. The maximum current your BMS can handle
|
||||
bms_max_discharge_current: '100' # A. The maximum current your BMS can handle
|
||||
# These values must match your BMS settings
|
||||
# LFP values example
|
||||
bms_cell_ovp: '3.650' # V. Used by 'Auto CCL' functions
|
||||
bms_cell_uvp: '2.800' # V. Used by 'Auto DCL' functions and to calculate maximum discharge voltage
|
||||
bms_balance_trigger_voltage: '0.010' # V. Used by 'Auto CVL' functions
|
||||
bms_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable
|
||||
bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable
|
||||
# BMS 3
|
||||
- path: 'packages/bms/bms_combine_SEPLOS_V3_RS485_sniffer_bms_full.yaml'
|
||||
- path: 'packages/bms/bms_combine_SEPLOS_V3_RS485_bms_full.yaml'
|
||||
vars:
|
||||
bms_id: '3'
|
||||
bms_prefix: 'bms2' # DON'T CHANGE THIS NAME !
|
||||
bms_name: 'SEPLOS-BMS 3'
|
||||
# Required settings cannot be retrieved from BMS
|
||||
bms_max_charge_current: '100' # A. The maximum current your BMS can handle
|
||||
bms_max_discharge_current: '100' # A. The maximum current your BMS can handle
|
||||
# These values must match your BMS settings
|
||||
# LFP values example
|
||||
bms_cell_ovp: '3.650' # V. Used by 'Auto CCL' functions
|
||||
bms_cell_uvp: '2.800' # V. Used by 'Auto DCL' functions and to calculate maximum discharge voltage
|
||||
bms_balance_trigger_voltage: '0.010' # V. Used by 'Auto CVL' functions
|
||||
bms_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable
|
||||
bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable
|
||||
|
||||
|
||||
|
||||
@@ -328,13 +335,14 @@ packages:
|
||||
|
||||
- path: 'packages/yambms/yambms_canbus.yaml' # yambms_canbus_web_server.yaml
|
||||
vars:
|
||||
canbus_id: '1' # Must be a number
|
||||
canbus_id: '1' # must be a number
|
||||
canbus_name: 'CANBUS 1'
|
||||
canbus_node_id: 'canbus_inverter_1' # CAN bus node to which your inverter is connected
|
||||
canbus_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable
|
||||
# The CANBUS link will be considered down if no response from the inverter (ID 0x305) for 5s
|
||||
# The Deye inverter sends the ACK (can_id 0x305) only when it receives the can_id 0x356
|
||||
canbus_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable
|
||||
# The CAN bus link will be paused for `30s` if the inverter does not respond with an ACK (can_id 0x305)
|
||||
# before the end of the `canbus_link_timer` (5s by default).
|
||||
canbus_link_timer: '5s'
|
||||
canbus_extended_ack: 'false' # Set to 'true' for enable extended 29-bit IDs (required for Schneider XW Pro)
|
||||
|
||||
|
||||
|
||||
@@ -349,7 +357,7 @@ packages:
|
||||
# rs485_uart_id: 'uart_esp_3' # UART interface to which your inverter is connected
|
||||
# rs485_uart_baud_rate: '9600'
|
||||
# rs485_update_timeout: '5s'
|
||||
# rs485_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable
|
||||
# rs485_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable
|
||||
|
||||
|
||||
|
||||
|
||||
+11
-9
@@ -1,4 +1,4 @@
|
||||
# Updated : 2026.02.05
|
||||
# Updated : 2026.02.16
|
||||
# Version : 1.7.0
|
||||
# GitHub : https://github.com/Sleeper85/esphome-yambms
|
||||
|
||||
@@ -174,6 +174,7 @@ packages:
|
||||
# - path: 'packages/board/board_ESP32-C3_DevKitM-1.yaml'
|
||||
# - path: 'packages/board/board_ESP32-C3_ETH01-EVO.yaml'
|
||||
# - path: 'packages/board/board_ESP32-C3_FlipC3.yaml'
|
||||
# - path: 'packages/board/board_ESP32-S3_Generic.yaml'
|
||||
# - path: 'packages/board/board_ESP32-S3_AtomS3-Lite.yaml'
|
||||
# - path: 'packages/board/board_ESP32-S3_AtomS3.yaml'
|
||||
# - path: 'packages/board/board_ESP32-S3_AtomS3R.yaml'
|
||||
@@ -277,14 +278,14 @@ packages:
|
||||
bms_id: '1' # must be a number
|
||||
bms_name: 'BASEN-BMS 1'
|
||||
bms_address: '0x01'
|
||||
bms_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable
|
||||
bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable
|
||||
# Basen module 2
|
||||
- path: 'packages/bms/bms_combine_BASEN_RS485_full.yaml'
|
||||
vars:
|
||||
bms_id: '2' # must be a number
|
||||
bms_name: 'BASEN-BMS 2'
|
||||
bms_address: '0x02'
|
||||
bms_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable
|
||||
bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable
|
||||
|
||||
# Balancer 1 linked to BMS 1
|
||||
- path: 'packages/balancer/balancer_sensors_JK_NEEY_BLE.yaml'
|
||||
@@ -292,7 +293,7 @@ packages:
|
||||
bms_id: '1' # must match the BMS ID
|
||||
balancer_name: 'Balancer 1'
|
||||
balancer_ble_mac_address: 11:22:33:44:55:66
|
||||
balancer_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable
|
||||
balancer_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable
|
||||
# Balancer 2 linked to BMS 2
|
||||
- path: 'packages/balancer/balancer_sensors_JK_NEEY_BLE.yaml'
|
||||
vars:
|
||||
@@ -317,13 +318,14 @@ packages:
|
||||
|
||||
- path: 'packages/yambms/yambms_canbus.yaml' # yambms_canbus_web_server.yaml
|
||||
vars:
|
||||
canbus_id: '1' # Must be a number
|
||||
canbus_id: '1' # must be a number
|
||||
canbus_name: 'CANBUS 1'
|
||||
canbus_node_id: 'canbus_inverter_1' # CAN bus node to which your inverter is connected
|
||||
canbus_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable
|
||||
# The CANBUS link will be considered down if no response from the inverter (ID 0x305) for 5s
|
||||
# The Deye inverter sends the ACK (can_id 0x305) only when it receives the can_id 0x356
|
||||
canbus_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable
|
||||
# The CAN bus link will be paused for `30s` if the inverter does not respond with an ACK (can_id 0x305)
|
||||
# before the end of the `canbus_link_timer` (5s by default).
|
||||
canbus_link_timer: '5s'
|
||||
canbus_extended_ack: 'false' # Set to 'true' for enable extended 29-bit IDs (required for Schneider XW Pro)
|
||||
|
||||
|
||||
|
||||
@@ -338,7 +340,7 @@ packages:
|
||||
# rs485_uart_id: 'uart_esp_3' # UART interface to which your inverter is connected
|
||||
# rs485_uart_baud_rate: '9600'
|
||||
# rs485_update_timeout: '5s'
|
||||
# rs485_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable
|
||||
# rs485_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable
|
||||
|
||||
|
||||
|
||||
|
||||
+11
-9
@@ -1,4 +1,4 @@
|
||||
# Updated : 2026.02.05
|
||||
# Updated : 2026.02.16
|
||||
# Version : 1.7.0
|
||||
# GitHub : https://github.com/Sleeper85/esphome-yambms
|
||||
|
||||
@@ -174,6 +174,7 @@ packages:
|
||||
# - path: 'packages/board/board_ESP32-C3_DevKitM-1.yaml'
|
||||
# - path: 'packages/board/board_ESP32-C3_ETH01-EVO.yaml'
|
||||
# - path: 'packages/board/board_ESP32-C3_FlipC3.yaml'
|
||||
# - path: 'packages/board/board_ESP32-S3_Generic.yaml'
|
||||
# - path: 'packages/board/board_ESP32-S3_AtomS3-Lite.yaml'
|
||||
# - path: 'packages/board/board_ESP32-S3_AtomS3.yaml'
|
||||
# - path: 'packages/board/board_ESP32-S3_AtomS3R.yaml'
|
||||
@@ -292,7 +293,7 @@ packages:
|
||||
bms_cell_uvp: '2.800' # V Used by 'Auto DCL' functions and to calculate maximum discharge voltage
|
||||
bms_balance_trigger_voltage: '0.010' # V Used by 'Auto CVL' functions
|
||||
bms_charging_cycles: '178' # charging cycles number Used to calculate the SoH
|
||||
bms_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable
|
||||
bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable
|
||||
# BMS 2
|
||||
- path: 'packages/bms/bms_combine_FAKE.yaml'
|
||||
vars:
|
||||
@@ -318,7 +319,7 @@ packages:
|
||||
bms_cell_uvp: '2.800' # V Used by 'Auto DCL' functions and to calculate maximum discharge voltage
|
||||
bms_balance_trigger_voltage: '0.010' # V Used by 'Auto CVL' functions
|
||||
bms_charging_cycles: '226' # charging cycles number Used to calculate the SoH
|
||||
bms_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable
|
||||
bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable
|
||||
# BMS 3
|
||||
- path: 'packages/bms/bms_combine_FAKE.yaml'
|
||||
vars:
|
||||
@@ -344,7 +345,7 @@ packages:
|
||||
bms_cell_uvp: '2.800' # V Used by 'Auto DCL' functions and to calculate maximum discharge voltage
|
||||
bms_balance_trigger_voltage: '0.010' # V Used by 'Auto CVL' functions
|
||||
bms_charging_cycles: '194' # charging cycles number Used to calculate the SoH
|
||||
bms_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable
|
||||
bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable
|
||||
|
||||
|
||||
|
||||
@@ -362,13 +363,14 @@ packages:
|
||||
|
||||
- path: 'packages/yambms/yambms_canbus.yaml' # yambms_canbus_web_server.yaml
|
||||
vars:
|
||||
canbus_id: '1' # Must be a number
|
||||
canbus_id: '1' # must be a number
|
||||
canbus_name: 'CANBUS 1'
|
||||
canbus_node_id: 'canbus_inverter_1' # CAN bus node to which your inverter is connected
|
||||
canbus_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable
|
||||
# The CANBUS link will be considered down if no response from the inverter (ID 0x305) for 5s
|
||||
# The Deye inverter sends the ACK (can_id 0x305) only when it receives the can_id 0x356
|
||||
canbus_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable
|
||||
# The CAN bus link will be paused for `30s` if the inverter does not respond with an ACK (can_id 0x305)
|
||||
# before the end of the `canbus_link_timer` (5s by default).
|
||||
canbus_link_timer: '5s'
|
||||
canbus_extended_ack: 'false' # Set to 'true' for enable extended 29-bit IDs (required for Schneider XW Pro)
|
||||
|
||||
|
||||
|
||||
@@ -383,7 +385,7 @@ packages:
|
||||
# rs485_uart_id: 'uart_esp_3' # UART interface to which your inverter is connected
|
||||
# rs485_uart_baud_rate: '9600'
|
||||
# rs485_update_timeout: '5s'
|
||||
# rs485_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable
|
||||
# rs485_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable
|
||||
|
||||
|
||||
|
||||
|
||||
@@ -1,4 +1,4 @@
|
||||
# Updated : 2026.02.05
|
||||
# Updated : 2026.02.16
|
||||
# Version : 1.7.0
|
||||
# GitHub : https://github.com/Sleeper85/esphome-yambms
|
||||
|
||||
@@ -249,13 +249,14 @@ packages:
|
||||
|
||||
- path: 'packages/yambms/yambms_canbus.yaml' # yambms_canbus_web_server.yaml
|
||||
vars:
|
||||
canbus_id: '1' # Must be a number
|
||||
canbus_id: '1' # must be a number
|
||||
canbus_name: 'CANBUS 1'
|
||||
canbus_node_id: 'canbus_inverter_1' # CAN bus node to which your inverter is connected
|
||||
canbus_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable
|
||||
# The CANBUS link will be considered down if no response from the inverter (ID 0x305) for 5s
|
||||
# The Deye inverter sends the ACK (can_id 0x305) only when it receives the can_id 0x356
|
||||
canbus_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable
|
||||
# The CAN bus link will be paused for `30s` if the inverter does not respond with an ACK (can_id 0x305)
|
||||
# before the end of the `canbus_link_timer` (5s by default).
|
||||
canbus_link_timer: '5s'
|
||||
canbus_extended_ack: 'false' # Set to 'true' for enable extended 29-bit IDs (required for Schneider XW Pro)
|
||||
|
||||
|
||||
|
||||
@@ -270,7 +271,7 @@ packages:
|
||||
# rs485_uart_id: 'uart_esp_3' # UART interface to which your inverter is connected
|
||||
# rs485_uart_baud_rate: '9600'
|
||||
# rs485_update_timeout: '5s'
|
||||
# rs485_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable
|
||||
# rs485_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable
|
||||
|
||||
|
||||
|
||||
|
||||
@@ -1,4 +1,4 @@
|
||||
# Updated : 2026.02.05
|
||||
# Updated : 2026.02.16
|
||||
# Version : 1.7.0
|
||||
# GitHub : https://github.com/Sleeper85/esphome-yambms
|
||||
|
||||
@@ -260,13 +260,14 @@ packages:
|
||||
|
||||
- path: 'packages/yambms/yambms_canbus.yaml' # yambms_canbus_web_server.yaml
|
||||
vars:
|
||||
canbus_id: '1' # Must be a number
|
||||
canbus_id: '1' # must be a number
|
||||
canbus_name: 'CANBUS 1'
|
||||
canbus_node_id: 'canbus_inverter_1' # CAN bus node to which your inverter is connected
|
||||
canbus_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable
|
||||
# The CANBUS link will be considered down if no response from the inverter (ID 0x305) for 5s
|
||||
# The Deye inverter sends the ACK (can_id 0x305) only when it receives the can_id 0x356
|
||||
canbus_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable
|
||||
# The CAN bus link will be paused for `30s` if the inverter does not respond with an ACK (can_id 0x305)
|
||||
# before the end of the `canbus_link_timer` (5s by default).
|
||||
canbus_link_timer: '5s'
|
||||
canbus_extended_ack: 'false' # Set to 'true' for enable extended 29-bit IDs (required for Schneider XW Pro)
|
||||
|
||||
|
||||
|
||||
@@ -281,7 +282,7 @@ packages:
|
||||
# rs485_uart_id: 'uart_esp_3' # UART interface to which your inverter is connected
|
||||
# rs485_uart_baud_rate: '9600'
|
||||
# rs485_update_timeout: '5s'
|
||||
# rs485_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable
|
||||
# rs485_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable
|
||||
|
||||
|
||||
|
||||
|
||||
@@ -1,4 +1,4 @@
|
||||
# Updated : 2026.02.05
|
||||
# Updated : 2026.02.16
|
||||
# Version : 1.7.0
|
||||
# GitHub : https://github.com/Sleeper85/esphome-yambms
|
||||
|
||||
@@ -89,32 +89,32 @@ packages:
|
||||
shunt_id: '1'
|
||||
shunt_name: 'Shunt 1'
|
||||
shunt_uart_id: 'uart_2'
|
||||
shunt_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable
|
||||
shunt_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable
|
||||
# shunt2
|
||||
- path: packages/shunt/shunt_modbus_Victron_SmartShunt_UART_minimal.yaml
|
||||
vars:
|
||||
shunt_id: '2'
|
||||
shunt_name: 'Shunt 2'
|
||||
shunt_uart_id: 'uart_3'
|
||||
shunt_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable
|
||||
shunt_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable
|
||||
# shunt3
|
||||
- path: packages/shunt/shunt_modbus_Victron_SmartShunt_UART_minimal.yaml
|
||||
vars:
|
||||
shunt_id: '3'
|
||||
shunt_name: 'Shunt 3'
|
||||
shunt_uart_id: 'uart_4'
|
||||
shunt_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable
|
||||
shunt_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable
|
||||
# shunt4
|
||||
- path: packages/shunt/shunt_modbus_Victron_SmartShunt_UART_minimal.yaml
|
||||
vars:
|
||||
shunt_id: '4'
|
||||
shunt_name: 'Shunt 4'
|
||||
shunt_uart_id: 'uart_5'
|
||||
shunt_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable
|
||||
shunt_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable
|
||||
# shunt5
|
||||
- path: packages/shunt/shunt_modbus_Victron_SmartShunt_UART_minimal.yaml
|
||||
vars:
|
||||
shunt_id: '5'
|
||||
shunt_name: 'Shunt 5'
|
||||
shunt_uart_id: 'uart_6'
|
||||
shunt_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable
|
||||
shunt_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable
|
||||
@@ -1,4 +1,4 @@
|
||||
# Updated : 2026.02.05
|
||||
# Updated : 2026.02.16
|
||||
# Version : 1.7.0
|
||||
# GitHub : https://github.com/Sleeper85/esphome-yambms
|
||||
|
||||
@@ -174,6 +174,7 @@ packages:
|
||||
# - path: 'packages/board/board_ESP32-C3_DevKitM-1.yaml'
|
||||
# - path: 'packages/board/board_ESP32-C3_ETH01-EVO.yaml'
|
||||
# - path: 'packages/board/board_ESP32-C3_FlipC3.yaml'
|
||||
# - path: 'packages/board/board_ESP32-S3_Generic.yaml'
|
||||
# - path: 'packages/board/board_ESP32-S3_AtomS3-Lite.yaml'
|
||||
# - path: 'packages/board/board_ESP32-S3_AtomS3.yaml'
|
||||
# - path: 'packages/board/board_ESP32-S3_AtomS3R.yaml'
|
||||
@@ -279,13 +280,14 @@ packages:
|
||||
|
||||
- path: 'packages/yambms/yambms_canbus.yaml' # yambms_canbus_web_server.yaml
|
||||
vars:
|
||||
canbus_id: '1' # Must be a number
|
||||
canbus_id: '1' # must be a number
|
||||
canbus_name: 'CANBUS 1'
|
||||
canbus_node_id: 'canbus_inverter_1' # CAN bus node to which your inverter is connected
|
||||
canbus_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable
|
||||
# The CANBUS link will be considered down if no response from the inverter (ID 0x305) for 5s
|
||||
# The Deye inverter sends the ACK (can_id 0x305) only when it receives the can_id 0x356
|
||||
canbus_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable
|
||||
# The CAN bus link will be paused for `30s` if the inverter does not respond with an ACK (can_id 0x305)
|
||||
# before the end of the `canbus_link_timer` (5s by default).
|
||||
canbus_link_timer: '5s'
|
||||
canbus_extended_ack: 'false' # Set to 'true' for enable extended 29-bit IDs (required for Schneider XW Pro)
|
||||
|
||||
|
||||
|
||||
@@ -300,7 +302,7 @@ packages:
|
||||
# rs485_uart_id: 'uart_esp_3' # UART interface to which your inverter is connected
|
||||
# rs485_uart_baud_rate: '9600'
|
||||
# rs485_update_timeout: '5s'
|
||||
# rs485_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable
|
||||
# rs485_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable
|
||||
|
||||
|
||||
# +------------------------------------------------------------------------------+
|
||||
|
||||
@@ -1,4 +1,4 @@
|
||||
# Updated : 2026.02.05
|
||||
# Updated : 2026.02.16
|
||||
# Version : 1.7.0
|
||||
# GitHub : https://github.com/Sleeper85/esphome-yambms
|
||||
|
||||
@@ -174,6 +174,7 @@ packages:
|
||||
# - path: 'packages/board/board_ESP32-C3_DevKitM-1.yaml'
|
||||
# - path: 'packages/board/board_ESP32-C3_ETH01-EVO.yaml'
|
||||
# - path: 'packages/board/board_ESP32-C3_FlipC3.yaml'
|
||||
# - path: 'packages/board/board_ESP32-S3_Generic.yaml'
|
||||
# - path: 'packages/board/board_ESP32-S3_AtomS3-Lite.yaml'
|
||||
# - path: 'packages/board/board_ESP32-S3_AtomS3.yaml'
|
||||
# - path: 'packages/board/board_ESP32-S3_AtomS3R.yaml'
|
||||
@@ -279,13 +280,14 @@ packages:
|
||||
|
||||
- path: 'packages/yambms/yambms_canbus.yaml' # yambms_canbus_web_server.yaml
|
||||
vars:
|
||||
canbus_id: '1' # Must be a number
|
||||
canbus_id: '1' # must be a number
|
||||
canbus_name: 'CANBUS 1'
|
||||
canbus_node_id: 'canbus_inverter_1' # CAN bus node to which your inverter is connected
|
||||
canbus_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable
|
||||
# The CANBUS link will be considered down if no response from the inverter (ID 0x305) for 5s
|
||||
# The Deye inverter sends the ACK (can_id 0x305) only when it receives the can_id 0x356
|
||||
canbus_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable
|
||||
# The CAN bus link will be paused for `30s` if the inverter does not respond with an ACK (can_id 0x305)
|
||||
# before the end of the `canbus_link_timer` (5s by default).
|
||||
canbus_link_timer: '5s'
|
||||
canbus_extended_ack: 'false' # Set to 'true' for enable extended 29-bit IDs (required for Schneider XW Pro)
|
||||
|
||||
|
||||
|
||||
@@ -300,7 +302,7 @@ packages:
|
||||
# rs485_uart_id: 'uart_esp_3' # UART interface to which your inverter is connected
|
||||
# rs485_uart_baud_rate: '9600'
|
||||
# rs485_update_timeout: '5s'
|
||||
# rs485_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable
|
||||
# rs485_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable
|
||||
|
||||
|
||||
# +------------------------------------------------------------------------------+
|
||||
|
||||
@@ -1,4 +1,4 @@
|
||||
# Updated : 2026.02.15
|
||||
# Updated : 2026.02.16
|
||||
# Version : 1.1.3
|
||||
# GitHub : https://github.com/Sleeper85/esphome-yambms
|
||||
|
||||
@@ -41,7 +41,7 @@ packages:
|
||||
bms_id: '1' # must be a number
|
||||
bms_name: 'BASEN-BMS 1'
|
||||
bms_address: '0x01'
|
||||
bms_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable
|
||||
bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable
|
||||
|
||||
# Basen module 2
|
||||
bms2: !include
|
||||
@@ -50,4 +50,4 @@ packages:
|
||||
bms_id: '2' # must be a number
|
||||
bms_name: 'BASEN-BMS 2'
|
||||
bms_address: '0x02'
|
||||
bms_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable
|
||||
bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable
|
||||
@@ -1,4 +1,4 @@
|
||||
# Updated : 2026.02.15
|
||||
# Updated : 2026.02.16
|
||||
# Version : 1.1.4
|
||||
# GitHub : https://github.com/Sleeper85/esphome-yambms
|
||||
|
||||
@@ -36,7 +36,7 @@ packages:
|
||||
shunt_current: '17.5' # A
|
||||
shunt_power: '924' # W
|
||||
shunt_soc: '50' # %
|
||||
shunt_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable
|
||||
shunt_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable
|
||||
|
||||
bms1: !include
|
||||
file: packages/bms/bms_combine_DEMO.yaml
|
||||
@@ -58,7 +58,7 @@ packages:
|
||||
bms_cell_uvp: '2.800' # V Used by 'Auto DCL' functions and to calculate maximum discharge voltage
|
||||
bms_balance_trigger_voltage: '0.010' # V Used by 'Auto CVL' functions
|
||||
bms_charging_cycles: '178' # charging cycles number Used to calculate the SoH
|
||||
bms_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable
|
||||
bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable
|
||||
|
||||
bms2: !include
|
||||
file: packages/bms/bms_combine_DEMO.yaml
|
||||
@@ -80,7 +80,7 @@ packages:
|
||||
bms_cell_uvp: '2.800' # V Used by 'Auto DCL' functions and to calculate maximum discharge voltage
|
||||
bms_balance_trigger_voltage: '0.010' # V Used by 'Auto CVL' functions
|
||||
bms_charging_cycles: '226' # charging cycles number Used to calculate the SoH
|
||||
bms_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable
|
||||
bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable
|
||||
|
||||
bms3: !include
|
||||
file: packages/bms/bms_combine_DEMO.yaml
|
||||
@@ -102,4 +102,4 @@ packages:
|
||||
bms_cell_uvp: '2.800' # V Used by 'Auto DCL' functions and to calculate maximum discharge voltage
|
||||
bms_balance_trigger_voltage: '0.010' # V Used by 'Auto CVL' functions
|
||||
bms_charging_cycles: '194' # charging cycles number Used to calculate the SoH
|
||||
bms_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable
|
||||
bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable
|
||||
@@ -1,4 +1,4 @@
|
||||
# Updated : 2026.02.15
|
||||
# Updated : 2026.02.16
|
||||
# Version : 1.1.3
|
||||
# GitHub : https://github.com/Sleeper85/esphome-yambms
|
||||
|
||||
@@ -46,7 +46,7 @@ packages:
|
||||
bms_name: 'DEYE-BMS 1'
|
||||
deye_id: '1'
|
||||
deye_module_id: '0' # Modules are numbered with 0-9
|
||||
bms_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable
|
||||
bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable
|
||||
|
||||
# Deye module 2
|
||||
bms2: !include
|
||||
@@ -59,4 +59,4 @@ packages:
|
||||
bms_id: '2' # must be a number
|
||||
bms_name: 'DEYE-BMS 2'
|
||||
deye_module_id: '1' # Modules are numbered with 0-9
|
||||
bms_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable
|
||||
bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable
|
||||
@@ -1,4 +1,4 @@
|
||||
# Updated : 2026.02.15
|
||||
# Updated : 2026.02.16
|
||||
# Version : 1.1.4
|
||||
# GitHub : https://github.com/Sleeper85/esphome-yambms
|
||||
|
||||
@@ -39,7 +39,7 @@ packages:
|
||||
bms_name: 'EG4-BMS 1'
|
||||
## BMS address must start at 2 with EG4 LLV2, ID 1 is a special case and has different output.
|
||||
bms_address: 2 # BMS 1 modbus address
|
||||
bms_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable
|
||||
bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable
|
||||
|
||||
bms2: !include
|
||||
file: packages/bms/bms_combine_EG4_LLV2_RS485_bms_full.yaml
|
||||
@@ -47,7 +47,7 @@ packages:
|
||||
bms_id: '2' # must be a number
|
||||
bms_name: 'EG4-BMS 2'
|
||||
bms_address: 3 # BMS 2 modbus address
|
||||
bms_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable
|
||||
bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable
|
||||
|
||||
bms3: !include
|
||||
file: packages/bms/bms_combine_EG4_LLV2_RS485_bms_full.yaml
|
||||
@@ -55,4 +55,4 @@ packages:
|
||||
bms_id: '3' # must be a number
|
||||
bms_name: 'EG4-BMS 3'
|
||||
bms_address: 4 # BMS 3 modbus address
|
||||
bms_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable
|
||||
bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable
|
||||
@@ -1,4 +1,4 @@
|
||||
# Updated : 2026.02.15
|
||||
# Updated : 2026.02.16
|
||||
# Version : 1.1.1
|
||||
# GitHub : https://github.com/Sleeper85/esphome-yambms
|
||||
|
||||
@@ -52,7 +52,7 @@ packages:
|
||||
bms_address: '0x01' # BMS 1 modbus address (usually 0x01 for primary)
|
||||
bms_battery_count: '3' # total batteries polled (1=primary only, 2+=primary+secondaries)
|
||||
bms_cell_max_cycles: '6000.0'
|
||||
bms_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable
|
||||
bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable
|
||||
|
||||
# Secondary battery 2 (BMS 2) - data polled by primary
|
||||
bms2: !include
|
||||
|
||||
@@ -1,4 +1,4 @@
|
||||
# Updated : 2026.02.15
|
||||
# Updated : 2026.02.16
|
||||
# Version : 1.1.4
|
||||
# GitHub : https://github.com/Sleeper85/esphome-yambms
|
||||
|
||||
@@ -44,7 +44,7 @@ packages:
|
||||
# Maximum cell charging cycles is used to calculate the battey SoH.
|
||||
# MB31=8000.0, LF280K v3=8000.0, LF280K v2=6000.0, LF280=3000.0 (decimal is required)
|
||||
bms_cell_max_cycles: '6000.0'
|
||||
bms_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable
|
||||
bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable
|
||||
|
||||
bms2: !include
|
||||
file: packages/bms/bms_combine_JBD_BLE_full.yaml
|
||||
@@ -63,4 +63,4 @@ packages:
|
||||
# Maximum cell charging cycles is used to calculate the battey SoH.
|
||||
# MB31=8000.0, LF280K v3=8000.0, LF280K v2=6000.0, LF280=3000.0 (decimal is required)
|
||||
bms_cell_max_cycles: '6000.0'
|
||||
bms_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable
|
||||
bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable
|
||||
@@ -1,4 +1,4 @@
|
||||
# Updated : 2026.02.15
|
||||
# Updated : 2026.02.16
|
||||
# Version : 1.1.5
|
||||
# GitHub : https://github.com/Sleeper85/esphome-yambms
|
||||
|
||||
@@ -50,7 +50,7 @@ packages:
|
||||
bms_id: '1' # must be a number
|
||||
bms_name: 'JK-BMS 1'
|
||||
bms_address: '0x01' # BMS 1 DIP switch
|
||||
bms_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable
|
||||
bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable
|
||||
|
||||
bms2: !include
|
||||
file: packages/bms/bms_combine_JK_RS485_Modbus_JK-B_standard.yaml
|
||||
@@ -58,7 +58,7 @@ packages:
|
||||
bms_id: '2' # must be a number
|
||||
bms_name: 'JK-BMS 2'
|
||||
bms_address: '0x02' # BMS 2 DIP switch
|
||||
bms_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable
|
||||
bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable
|
||||
|
||||
bms3: !include
|
||||
file: packages/bms/bms_combine_JK_RS485_Modbus_JK-B_standard.yaml
|
||||
@@ -66,7 +66,7 @@ packages:
|
||||
bms_id: '3' # must be a number
|
||||
bms_name: 'JK-BMS 3'
|
||||
bms_address: '0x03' # BMS 3 DIP switch
|
||||
bms_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable
|
||||
bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable
|
||||
|
||||
bms4: !include
|
||||
file: packages/bms/bms_combine_JK_RS485_Modbus_JK-B_standard.yaml
|
||||
@@ -74,7 +74,7 @@ packages:
|
||||
bms_id: '4' # must be a number
|
||||
bms_name: 'JK-BMS 4'
|
||||
bms_address: '0x04' # BMS 4 DIP switch
|
||||
bms_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable
|
||||
bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable
|
||||
|
||||
bms5: !include
|
||||
file: packages/bms/bms_combine_JK_RS485_Modbus_JK-B_standard.yaml
|
||||
@@ -82,7 +82,7 @@ packages:
|
||||
bms_id: '5' # must be a number
|
||||
bms_name: 'JK-BMS 5'
|
||||
bms_address: '0x05' # BMS 5 DIP switch
|
||||
bms_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable
|
||||
bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable
|
||||
|
||||
bms6: !include
|
||||
file: packages/bms/bms_combine_JK_RS485_Modbus_JK-B_standard.yaml
|
||||
@@ -90,7 +90,7 @@ packages:
|
||||
bms_id: '6' # must be a number
|
||||
bms_name: 'JK-BMS 6'
|
||||
bms_address: '0x06' # BMS 6 DIP switch
|
||||
bms_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable
|
||||
bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable
|
||||
|
||||
bms7: !include
|
||||
file: packages/bms/bms_combine_JK_RS485_Modbus_JK-B_standard.yaml
|
||||
@@ -98,7 +98,7 @@ packages:
|
||||
bms_id: '7' # must be a number
|
||||
bms_name: 'JK-BMS 7'
|
||||
bms_address: '0x07' # BMS 7 DIP switch
|
||||
bms_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable
|
||||
bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable
|
||||
|
||||
bms8: !include
|
||||
file: packages/bms/bms_combine_JK_RS485_Modbus_JK-B_standard.yaml
|
||||
@@ -106,4 +106,4 @@ packages:
|
||||
bms_id: '8' # must be a number
|
||||
bms_name: 'JK-BMS 8'
|
||||
bms_address: '0x08' # BMS 8 DIP switch
|
||||
bms_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable
|
||||
bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable
|
||||
@@ -1,4 +1,4 @@
|
||||
# Updated : 2026.02.15
|
||||
# Updated : 2026.02.16
|
||||
# Version : 1.1.5
|
||||
# GitHub : https://github.com/Sleeper85/esphome-yambms
|
||||
|
||||
@@ -50,7 +50,7 @@ packages:
|
||||
bms_id: '1' # must be a number
|
||||
bms_name: 'JK-BMS 1'
|
||||
bms_address: '0x00' # BMS 1 DIP switch
|
||||
bms_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable
|
||||
bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable
|
||||
|
||||
bms2: !include
|
||||
file: packages/bms/bms_combine_JK_RS485_Modbus_bms_full.yaml
|
||||
@@ -58,7 +58,7 @@ packages:
|
||||
bms_id: '2' # must be a number
|
||||
bms_name: 'JK-BMS 2'
|
||||
bms_address: '0x01' # BMS 2 DIP switch
|
||||
bms_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable
|
||||
bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable
|
||||
|
||||
bms3: !include
|
||||
file: packages/bms/bms_combine_JK_RS485_Modbus_bms_full.yaml
|
||||
@@ -66,7 +66,7 @@ packages:
|
||||
bms_id: '3' # must be a number
|
||||
bms_name: 'JK-BMS 3'
|
||||
bms_address: '0x02' # BMS 3 DIP switch
|
||||
bms_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable
|
||||
bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable
|
||||
|
||||
bms4: !include
|
||||
file: packages/bms/bms_combine_JK_RS485_Modbus_bms_full.yaml
|
||||
@@ -74,7 +74,7 @@ packages:
|
||||
bms_id: '4' # must be a number
|
||||
bms_name: 'JK-BMS 4'
|
||||
bms_address: '0x03' # BMS 4 DIP switch
|
||||
bms_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable
|
||||
bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable
|
||||
|
||||
bms5: !include
|
||||
file: packages/bms/bms_combine_JK_RS485_Modbus_bms_full.yaml
|
||||
@@ -82,7 +82,7 @@ packages:
|
||||
bms_id: '5' # must be a number
|
||||
bms_name: 'JK-BMS 5'
|
||||
bms_address: '0x04' # BMS 5 DIP switch
|
||||
bms_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable
|
||||
bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable
|
||||
|
||||
bms6: !include
|
||||
file: packages/bms/bms_combine_JK_RS485_Modbus_bms_full.yaml
|
||||
@@ -90,7 +90,7 @@ packages:
|
||||
bms_id: '6' # must be a number
|
||||
bms_name: 'JK-BMS 6'
|
||||
bms_address: '0x05' # BMS 6 DIP switch
|
||||
bms_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable
|
||||
bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable
|
||||
|
||||
bms7: !include
|
||||
file: packages/bms/bms_combine_JK_RS485_Modbus_bms_full.yaml
|
||||
@@ -98,4 +98,4 @@ packages:
|
||||
bms_id: '7' # must be a number
|
||||
bms_name: 'JK-BMS 7'
|
||||
bms_address: '0x06' # BMS 7 DIP switch
|
||||
bms_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable
|
||||
bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable
|
||||
@@ -1,4 +1,4 @@
|
||||
# Updated : 2026.02.15
|
||||
# Updated : 2026.02.16
|
||||
# Version : 1.1.5
|
||||
# GitHub : https://github.com/Sleeper85/esphome-yambms
|
||||
|
||||
@@ -50,7 +50,7 @@ packages:
|
||||
bms_id: '1' # must be a number
|
||||
bms_name: 'JK-BMS 1'
|
||||
bms_address: '0x01' # BMS 1 DIP switch
|
||||
bms_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable
|
||||
bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable
|
||||
|
||||
bms2: !include
|
||||
file: packages/bms/bms_combine_JK_RS485_Modbus_bms_standard.yaml
|
||||
@@ -58,7 +58,7 @@ packages:
|
||||
bms_id: '2' # must be a number
|
||||
bms_name: 'JK-BMS 2'
|
||||
bms_address: '0x02' # BMS 2 DIP switch
|
||||
bms_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable
|
||||
bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable
|
||||
|
||||
bms3: !include
|
||||
file: packages/bms/bms_combine_JK_RS485_Modbus_bms_standard.yaml
|
||||
@@ -66,7 +66,7 @@ packages:
|
||||
bms_id: '3' # must be a number
|
||||
bms_name: 'JK-BMS 3'
|
||||
bms_address: '0x03' # BMS 3 DIP switch
|
||||
bms_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable
|
||||
bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable
|
||||
|
||||
bms4: !include
|
||||
file: packages/bms/bms_combine_JK_RS485_Modbus_bms_standard.yaml
|
||||
@@ -74,7 +74,7 @@ packages:
|
||||
bms_id: '4' # must be a number
|
||||
bms_name: 'JK-BMS 4'
|
||||
bms_address: '0x04' # BMS 4 DIP switch
|
||||
bms_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable
|
||||
bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable
|
||||
|
||||
bms5: !include
|
||||
file: packages/bms/bms_combine_JK_RS485_Modbus_bms_standard.yaml
|
||||
@@ -82,7 +82,7 @@ packages:
|
||||
bms_id: '5' # must be a number
|
||||
bms_name: 'JK-BMS 5'
|
||||
bms_address: '0x05' # BMS 5 DIP switch
|
||||
bms_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable
|
||||
bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable
|
||||
|
||||
bms6: !include
|
||||
file: packages/bms/bms_combine_JK_RS485_Modbus_bms_standard.yaml
|
||||
@@ -90,7 +90,7 @@ packages:
|
||||
bms_id: '6' # must be a number
|
||||
bms_name: 'JK-BMS 6'
|
||||
bms_address: '0x06' # BMS 6 DIP switch
|
||||
bms_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable
|
||||
bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable
|
||||
|
||||
bms7: !include
|
||||
file: packages/bms/bms_combine_JK_RS485_Modbus_bms_standard.yaml
|
||||
@@ -98,7 +98,7 @@ packages:
|
||||
bms_id: '7' # must be a number
|
||||
bms_name: 'JK-BMS 7'
|
||||
bms_address: '0x07' # BMS 7 DIP switch
|
||||
bms_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable
|
||||
bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable
|
||||
|
||||
bms8: !include
|
||||
file: packages/bms/bms_combine_JK_RS485_Modbus_bms_standard.yaml
|
||||
@@ -106,4 +106,4 @@ packages:
|
||||
bms_id: '8' # must be a number
|
||||
bms_name: 'JK-BMS 8'
|
||||
bms_address: '0x08' # BMS 8 DIP switch
|
||||
bms_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable
|
||||
bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable
|
||||
@@ -1,4 +1,4 @@
|
||||
# Updated : 2026.02.15
|
||||
# Updated : 2026.02.16
|
||||
# Version : 1.1.3
|
||||
# GitHub : https://github.com/Sleeper85/esphome-yambms
|
||||
|
||||
@@ -36,7 +36,7 @@ packages:
|
||||
# Maximum cell charging cycles is used to calculate the battey SoH.
|
||||
# MB31=8000.0, LF280K v3=8000.0, LF280K v2=6000.0, LF280=3000.0 (decimal is required)
|
||||
bms_cell_max_cycles: '6000.0'
|
||||
bms_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable
|
||||
bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable
|
||||
|
||||
bms2: !include
|
||||
file: packages/bms/bms_combine_JK_BLE_standard.yaml
|
||||
@@ -48,4 +48,4 @@ packages:
|
||||
# Maximum cell charging cycles is used to calculate the battey SoH.
|
||||
# MB31=8000.0, LF280K v3=8000.0, LF280K v2=6000.0, LF280=3000.0 (decimal is required)
|
||||
bms_cell_max_cycles: '6000.0'
|
||||
bms_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable
|
||||
bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable
|
||||
@@ -1,4 +1,4 @@
|
||||
# Updated : 2026.02.15
|
||||
# Updated : 2026.02.16
|
||||
# Version : 1.1.3
|
||||
# GitHub : https://github.com/Sleeper85/esphome-yambms
|
||||
|
||||
@@ -35,7 +35,7 @@ packages:
|
||||
# Maximum cell charging cycles is used to calculate the battey SoH.
|
||||
# MB31=8000.0, LF280K v3=8000.0, LF280K v2=6000.0, LF280=3000.0 (decimal is required)
|
||||
bms_cell_max_cycles: '6000.0'
|
||||
bms_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable
|
||||
bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable
|
||||
|
||||
bms2: !include
|
||||
file: packages/bms/bms_combine_JK_UART_4G-GPS_full.yaml
|
||||
@@ -46,4 +46,4 @@ packages:
|
||||
# Maximum cell charging cycles is used to calculate the battey SoH.
|
||||
# MB31=8000.0, LF280K v3=8000.0, LF280K v2=6000.0, LF280=3000.0 (decimal is required)
|
||||
bms_cell_max_cycles: '6000.0'
|
||||
bms_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable
|
||||
bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable
|
||||
@@ -1,4 +1,4 @@
|
||||
# Updated : 2026.02.15
|
||||
# Updated : 2026.02.16
|
||||
# Version : 1.1.4
|
||||
# GitHub : https://github.com/Sleeper85/esphome-yambms
|
||||
|
||||
@@ -37,18 +37,18 @@ packages:
|
||||
vars:
|
||||
bms_id: '1' # BMS id and modbus address
|
||||
bms_name: 'PACE-BMS 1'
|
||||
bms_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable
|
||||
bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable
|
||||
|
||||
bms2: !include
|
||||
file: packages/bms/bms_combine_PACE_RS485_bms_full.yaml
|
||||
vars:
|
||||
bms_id: '2' # BMS id and modbus address
|
||||
bms_name: 'PACE-BMS 2'
|
||||
bms_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable
|
||||
bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable
|
||||
|
||||
bms3: !include
|
||||
file: packages/bms/bms_combine_PACE_RS485_bms_full.yaml
|
||||
vars:
|
||||
bms_id: '3' # BMS id and modbus address
|
||||
bms_name: 'PACE-BMS 3'
|
||||
bms_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable
|
||||
bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable
|
||||
@@ -1,4 +1,4 @@
|
||||
# Updated : 2026.02.15
|
||||
# Updated : 2026.02.16
|
||||
# Version : 1.1.5
|
||||
# GitHub : https://github.com/Sleeper85/esphome-yambms
|
||||
|
||||
@@ -47,7 +47,7 @@ packages:
|
||||
bms_cell_ovp: '3.650' # V. Used by 'Auto CCL' functions
|
||||
bms_cell_uvp: '2.800' # V. Used by 'Auto DCL' functions and to calculate maximum discharge voltage
|
||||
bms_balance_trigger_voltage: '0.010' # V. Used by 'Auto CVL' functions
|
||||
bms_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable
|
||||
bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable
|
||||
|
||||
bms2: !include
|
||||
file: packages/bms/bms_combine_SEPLOS_V1_V2_RS485_bms_full.yaml
|
||||
@@ -64,7 +64,7 @@ packages:
|
||||
bms_cell_ovp: '3.650' # V. Used by 'Auto CCL' functions
|
||||
bms_cell_uvp: '2.800' # V. Used by 'Auto DCL' functions and to calculate maximum discharge voltage
|
||||
bms_balance_trigger_voltage: '0.010' # V. Used by 'Auto CVL' functions
|
||||
bms_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable
|
||||
bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable
|
||||
|
||||
bms3: !include
|
||||
file: packages/bms/bms_combine_SEPLOS_V1_V2_RS485_bms_full.yaml
|
||||
@@ -81,4 +81,4 @@ packages:
|
||||
bms_cell_ovp: '3.650' # V. Used by 'Auto CCL' functions
|
||||
bms_cell_uvp: '2.800' # V. Used by 'Auto DCL' functions and to calculate maximum discharge voltage
|
||||
bms_balance_trigger_voltage: '0.010' # V. Used by 'Auto CVL' functions
|
||||
bms_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable
|
||||
bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable
|
||||
@@ -1,5 +1,5 @@
|
||||
# Updated : 2026.02.03
|
||||
# Version : 1.1.3
|
||||
# Updated : 2026.02.16
|
||||
# Version : 1.1.4
|
||||
# GitHub : https://github.com/Sleeper85/esphome-yambms
|
||||
|
||||
# YamBMS ( Yet another multi-BMS Merging Solution )
|
||||
@@ -19,7 +19,8 @@
|
||||
|
||||
############################ Local Packages Example ############################
|
||||
|
||||
# This is not a working YAML but just code ready to copy into your main YAML.
|
||||
# This is not a working YAML but just code ready to copy into
|
||||
# your main YAML below the `packages:` section.
|
||||
|
||||
################################################################################
|
||||
|
||||
@@ -34,43 +35,49 @@ packages:
|
||||
seplos_update_interval: '3' # # Time in seconds, update interval for all data points
|
||||
|
||||
bms1: !include
|
||||
file: packages/bms/bms_combine_SEPLOS_V3_RS485_sniffer_bms_full.yaml
|
||||
file: packages/bms/bms_combine_SEPLOS_V3_RS485_bms_full.yaml
|
||||
vars:
|
||||
bms_id: '1'
|
||||
bms_prefix: 'bms0' # DON'T CHANGE THIS NAME !
|
||||
bms_name: 'SEPLOS-BMS 1'
|
||||
# Required settings cannot be retrieved from BMS
|
||||
# These values must match your BMS settings
|
||||
bms_max_charge_current: '100' # A. The maximum current your BMS can handle
|
||||
bms_max_discharge_current: '100' # A. The maximum current your BMS can handle
|
||||
# LFP values example
|
||||
bms_cell_ovp: '3.650' # V. Used by 'Auto CCL' functions
|
||||
bms_cell_uvp: '2.800' # V. Used by 'Auto DCL' functions and to calculate maximum discharge voltage
|
||||
bms_balance_trigger_voltage: '0.010' # V. Used by 'Auto CVL' functions
|
||||
bms_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable
|
||||
bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable
|
||||
|
||||
bms2: !include
|
||||
file: packages/bms/bms_combine_SEPLOS_V3_RS485_sniffer_bms_full.yaml
|
||||
file: packages/bms/bms_combine_SEPLOS_V3_RS485_bms_full.yaml
|
||||
vars:
|
||||
bms_id: '2'
|
||||
bms_prefix: 'bms1' # DON'T CHANGE THIS NAME !
|
||||
bms_name: 'SEPLOS-BMS 2'
|
||||
# Required settings cannot be retrieved from BMS
|
||||
# These values must match your BMS settings
|
||||
bms_max_charge_current: '100' # A. The maximum current your BMS can handle
|
||||
bms_max_discharge_current: '100' # A. The maximum current your BMS can handle
|
||||
# LFP values example
|
||||
bms_cell_ovp: '3.650' # V. Used by 'Auto CCL' functions
|
||||
bms_cell_uvp: '2.800' # V. Used by 'Auto DCL' functions and to calculate maximum discharge voltage
|
||||
bms_balance_trigger_voltage: '0.010' # V. Used by 'Auto CVL' functions
|
||||
bms_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable
|
||||
bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable
|
||||
|
||||
bms3: !include
|
||||
file: packages/bms/bms_combine_SEPLOS_V3_RS485_sniffer_bms_full.yaml
|
||||
file: packages/bms/bms_combine_SEPLOS_V3_RS485_bms_full.yaml
|
||||
vars:
|
||||
bms_id: '3'
|
||||
bms_prefix: 'bms2' # DON'T CHANGE THIS NAME !
|
||||
bms_name: 'SEPLOS-BMS 3'
|
||||
# Required settings cannot be retrieved from BMS
|
||||
# These values must match your BMS settings
|
||||
bms_max_charge_current: '100' # A. The maximum current your BMS can handle
|
||||
bms_max_discharge_current: '100' # A. The maximum current your BMS can handle
|
||||
# LFP values example
|
||||
bms_cell_ovp: '3.650' # V. Used by 'Auto CCL' functions
|
||||
bms_cell_uvp: '2.800' # V. Used by 'Auto DCL' functions and to calculate maximum discharge voltage
|
||||
bms_balance_trigger_voltage: '0.010' # V. Used by 'Auto CVL' functions
|
||||
bms_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable
|
||||
bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable
|
||||
@@ -1,5 +1,5 @@
|
||||
# Updated : 2026.02.15
|
||||
# Version : 1.1.1
|
||||
# Updated : 2026.02.16
|
||||
# Version : 1.1.2
|
||||
# GitHub : https://github.com/Sleeper85/esphome-yambms
|
||||
|
||||
# YamBMS ( Yet another multi-BMS Merging Solution )
|
||||
@@ -41,6 +41,7 @@ packages:
|
||||
bms_id: '1' # must be a number
|
||||
bms_name: 'BASEN-BMS 1'
|
||||
bms_address: '0x01'
|
||||
bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable
|
||||
|
||||
# Basen module 2
|
||||
bms2: !include
|
||||
@@ -49,6 +50,7 @@ packages:
|
||||
bms_id: '2' # must be a number
|
||||
bms_name: 'BASEN-BMS 2'
|
||||
bms_address: '0x02'
|
||||
bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable
|
||||
|
||||
# Balancer 1 linked to BMS 1
|
||||
balancer1: !include
|
||||
@@ -57,6 +59,7 @@ packages:
|
||||
bms_id: '1' # must match the BMS ID
|
||||
balancer_name: 'Balancer 1'
|
||||
balancer_ble_mac_address: 11:22:33:44:55:66
|
||||
balancer_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable
|
||||
|
||||
# Balancer 2 linked to BMS 2
|
||||
balancer2: !include
|
||||
@@ -65,3 +68,4 @@ packages:
|
||||
bms_id: '2' # must match the BMS ID
|
||||
balancer_name: 'Balancer 2'
|
||||
balancer_ble_mac_address: 11:22:33:44:55:67
|
||||
balancer_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable
|
||||
@@ -1,4 +1,4 @@
|
||||
# Updated : 2026.02.15
|
||||
# Updated : 2026.02.16
|
||||
# Version : 1.1.5
|
||||
# GitHub : https://github.com/Sleeper85/esphome-yambms
|
||||
|
||||
@@ -32,7 +32,7 @@ packages:
|
||||
shunt_id: '1' # must be a number
|
||||
shunt_name: 'Shunt 1'
|
||||
shunt_uart_id: 'uart_esp_1'
|
||||
shunt_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable
|
||||
shunt_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable
|
||||
# Optional: BMS IDs connected to this shunt
|
||||
# If provided, the shunt will only be used when all listed BMS are online
|
||||
# If not provided, the shunt will be used independently of the BMS online status
|
||||
@@ -44,7 +44,7 @@ packages:
|
||||
shunt_id: '1' # must be a number
|
||||
shunt_name: 'Shunt 1'
|
||||
shunt_uart_id: 'uart_esp_1'
|
||||
shunt_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable
|
||||
shunt_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable
|
||||
# Optional: BMS IDs connected to this shunt
|
||||
# If provided, the shunt will only be used when all listed BMS are online
|
||||
# If not provided, the shunt will be used independently of the BMS online status
|
||||
@@ -57,7 +57,7 @@ packages:
|
||||
shunt_name: 'Shunt 1'
|
||||
shunt_mac_address: '60:A4:23:91:8F:55' # Your MAC address
|
||||
shunt_encryption_key: '0df4d0395b7d1a876c0c33ecb9e70dcd' # Your encryption key
|
||||
shunt_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable
|
||||
shunt_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable
|
||||
# Optional: BMS IDs connected to this shunt
|
||||
# If provided, the shunt will only be used when all listed BMS are online
|
||||
# If not provided, the shunt will be used independently of the BMS online status
|
||||
|
||||
@@ -1,4 +1,4 @@
|
||||
# Updated : 2026.02.15
|
||||
# Updated : 2026.02.16
|
||||
# Version : 1.1.3
|
||||
# GitHub : https://github.com/Sleeper85/esphome-yambms
|
||||
|
||||
@@ -43,11 +43,11 @@
|
||||
bms_id: '1' # must be a number
|
||||
bms_name: 'BASEN-BMS 1'
|
||||
bms_address: '0x01'
|
||||
bms_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable
|
||||
bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable
|
||||
# Basen module 2
|
||||
- path: 'packages/bms/bms_combine_BASEN_RS485_full.yaml'
|
||||
vars:
|
||||
bms_id: '2' # must be a number
|
||||
bms_name: 'BASEN-BMS 2'
|
||||
bms_address: '0x02'
|
||||
bms_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable
|
||||
bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable
|
||||
@@ -1,4 +1,4 @@
|
||||
# Updated : 2026.02.15
|
||||
# Updated : 2026.02.16
|
||||
# Version : 1.1.4
|
||||
# GitHub : https://github.com/Sleeper85/esphome-yambms
|
||||
|
||||
@@ -62,7 +62,7 @@
|
||||
bms_cell_uvp: '2.800' # V Used by 'Auto DCL' functions and to calculate maximum discharge voltage
|
||||
bms_balance_trigger_voltage: '0.010' # V Used by 'Auto CVL' functions
|
||||
bms_charging_cycles: '178' # charging cycles number Used to calculate the SoH
|
||||
bms_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable
|
||||
bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable
|
||||
|
||||
# BMS 2
|
||||
- path: 'packages/bms/bms_combine_DEMO.yaml'
|
||||
@@ -84,7 +84,7 @@
|
||||
bms_cell_uvp: '2.800' # V Used by 'Auto DCL' functions and to calculate maximum discharge voltage
|
||||
bms_balance_trigger_voltage: '0.010' # V Used by 'Auto CVL' functions
|
||||
bms_charging_cycles: '226' # charging cycles number Used to calculate the SoH
|
||||
bms_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable
|
||||
bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable
|
||||
|
||||
# BMS 3
|
||||
- path: 'packages/bms/bms_combine_DEMO.yaml'
|
||||
@@ -106,4 +106,4 @@
|
||||
bms_cell_uvp: '2.800' # V Used by 'Auto DCL' functions and to calculate maximum discharge voltage
|
||||
bms_balance_trigger_voltage: '0.010' # V Used by 'Auto CVL' functions
|
||||
bms_charging_cycles: '194' # charging cycles number Used to calculate the SoH
|
||||
bms_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable
|
||||
bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable
|
||||
@@ -1,4 +1,4 @@
|
||||
# Updated : 2026.02.15
|
||||
# Updated : 2026.02.16
|
||||
# Version : 1.1.3
|
||||
# GitHub : https://github.com/Sleeper85/esphome-yambms
|
||||
|
||||
@@ -48,7 +48,7 @@
|
||||
bms_name: 'DEYE-BMS 1'
|
||||
deye_id: '1'
|
||||
deye_module_id: '0' # Modules are numbered with 0-9
|
||||
bms_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable
|
||||
bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable
|
||||
# Deye module 2
|
||||
- path: 'packages/bms/bms_combine_DEYE_CAN_module_full.yaml'
|
||||
vars:
|
||||
@@ -59,4 +59,4 @@
|
||||
bms_id: '2' # must be a number
|
||||
bms_name: 'DEYE-BMS 2'
|
||||
deye_module_id: '1' # Modules are numbered with 0-9
|
||||
bms_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable
|
||||
bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable
|
||||
@@ -1,4 +1,4 @@
|
||||
# Updated : 2026.02.15
|
||||
# Updated : 2026.02.16
|
||||
# Version : 1.1.4
|
||||
# GitHub : https://github.com/Sleeper85/esphome-yambms
|
||||
|
||||
@@ -43,18 +43,18 @@
|
||||
bms_name: 'EG4-BMS 1'
|
||||
## BMS address must start at 2 with EG4 LLV2, ID 1 is a special case and has different output.
|
||||
bms_address: 2 # BMS 1 modbus address
|
||||
bms_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable
|
||||
bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable
|
||||
# BMS 2
|
||||
- path: 'packages/bms/bms_combine_EG4_LLV2_RS485_bms_full.yaml'
|
||||
vars:
|
||||
bms_id: '2' # must be a number
|
||||
bms_name: 'EG4-BMS 2'
|
||||
bms_address: 3 # BMS 2 modbus address
|
||||
bms_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable
|
||||
bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable
|
||||
# BMS 3
|
||||
- path: 'packages/bms/bms_combine_EG4_LLV2_RS485_bms_full.yaml'
|
||||
vars:
|
||||
bms_id: '2' # must be a number
|
||||
bms_name: 'EG4-BMS 3'
|
||||
bms_address: 4 # BMS 3 modbus address
|
||||
bms_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable
|
||||
bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable
|
||||
@@ -1,4 +1,4 @@
|
||||
# Updated : 2026.02.15
|
||||
# Updated : 2026.02.16
|
||||
# Version : 1.1.1
|
||||
# GitHub : https://github.com/Sleeper85/esphome-yambms
|
||||
|
||||
@@ -54,7 +54,7 @@
|
||||
bms_address: '0x01' # BMS 1 modbus address (usually 0x01 for primary)
|
||||
bms_battery_count: '3' # total batteries polled (1=primary only, 2+=primary+secondaries)
|
||||
bms_cell_max_cycles: '6000.0'
|
||||
bms_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable
|
||||
bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable
|
||||
# Secondary battery 2 (BMS 2) - data polled by primary
|
||||
- path: 'packages/bms/bms_combine_Ecoworthy_RS485_secondary.yaml'
|
||||
vars:
|
||||
|
||||
@@ -1,4 +1,4 @@
|
||||
# Updated : 2026.02.15
|
||||
# Updated : 2026.02.16
|
||||
# Version : 1.1.4
|
||||
# GitHub : https://github.com/Sleeper85/esphome-yambms
|
||||
|
||||
@@ -49,7 +49,7 @@
|
||||
# Maximum cell charging cycles is used to calculate the battey SoH.
|
||||
# MB31=8000.0, LF280K v3=8000.0, LF280K v2=6000.0, LF280=3000.0 (decimal is required)
|
||||
bms_cell_max_cycles: '6000.0'
|
||||
bms_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable
|
||||
bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable
|
||||
# BMS 2
|
||||
- path: 'packages/bms/bms_combine_JBD_BLE_full.yaml'
|
||||
vars:
|
||||
@@ -67,4 +67,4 @@
|
||||
# Maximum cell charging cycles is used to calculate the battey SoH.
|
||||
# MB31=8000.0, LF280K v3=8000.0, LF280K v2=6000.0, LF280=3000.0 (decimal is required)
|
||||
bms_cell_max_cycles: '6000.0'
|
||||
bms_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable
|
||||
bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable
|
||||
@@ -1,4 +1,4 @@
|
||||
# Updated : 2026.02.15
|
||||
# Updated : 2026.02.16
|
||||
# Version : 1.1.5
|
||||
# GitHub : https://github.com/Sleeper85/esphome-yambms
|
||||
|
||||
@@ -48,53 +48,53 @@
|
||||
bms_id: '1' # must be a number
|
||||
bms_name: 'JK-BMS 1'
|
||||
bms_address: '0x01' # BMS 1 ( JK app `Device Addr.` setting )
|
||||
bms_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable
|
||||
bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable
|
||||
# BMS 2
|
||||
- path: 'packages/bms/bms_combine_JK_RS485_Modbus_JK-B_standard.yaml'
|
||||
vars:
|
||||
bms_id: '2' # must be a number
|
||||
bms_name: 'JK-BMS 2'
|
||||
bms_address: '0x02' # BMS 2 ( JK app `Device Addr.` setting )
|
||||
bms_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable
|
||||
bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable
|
||||
# BMS 3
|
||||
- path: 'packages/bms/bms_combine_JK_RS485_Modbus_JK-B_standard.yaml'
|
||||
vars:
|
||||
bms_id: '3' # must be a number
|
||||
bms_name: 'JK-BMS 3'
|
||||
bms_address: '0x03' # BMS 3 ( JK app `Device Addr.` setting )
|
||||
bms_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable
|
||||
bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable
|
||||
# BMS 4
|
||||
- path: 'packages/bms/bms_combine_JK_RS485_Modbus_JK-B_standard.yaml'
|
||||
vars:
|
||||
bms_id: '4' # must be a number
|
||||
bms_name: 'JK-BMS 4'
|
||||
bms_address: '0x04' # BMS 4 ( JK app `Device Addr.` setting )
|
||||
bms_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable
|
||||
bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable
|
||||
# BMS 5
|
||||
- path: 'packages/bms/bms_combine_JK_RS485_Modbus_JK-B_standard.yaml'
|
||||
vars:
|
||||
bms_id: '5' # must be a number
|
||||
bms_name: 'JK-BMS 5'
|
||||
bms_address: '0x05' # BMS 5 ( JK app `Device Addr.` setting )
|
||||
bms_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable
|
||||
bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable
|
||||
# BMS 6
|
||||
- path: 'packages/bms/bms_combine_JK_RS485_Modbus_JK-B_standard.yaml'
|
||||
vars:
|
||||
bms_id: '6' # must be a number
|
||||
bms_name: 'JK-BMS 6'
|
||||
bms_address: '0x06' # BMS 6 ( JK app `Device Addr.` setting )
|
||||
bms_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable
|
||||
bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable
|
||||
# BMS 7
|
||||
- path: 'packages/bms/bms_combine_JK_RS485_Modbus_JK-B_standard.yaml'
|
||||
vars:
|
||||
bms_id: '7' # must be a number
|
||||
bms_name: 'JK-BMS 7'
|
||||
bms_address: '0x07' # BMS 7 ( JK app `Device Addr.` setting )
|
||||
bms_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable
|
||||
bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable
|
||||
# BMS 8
|
||||
- path: 'packages/bms/bms_combine_JK_RS485_Modbus_JK-B_standard.yaml'
|
||||
vars:
|
||||
bms_id: '8' # must be a number
|
||||
bms_name: 'JK-BMS 8'
|
||||
bms_address: '0x08' # BMS 8 ( JK app `Device Addr.` setting )
|
||||
bms_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable
|
||||
bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable
|
||||
@@ -1,4 +1,4 @@
|
||||
# Updated : 2026.02.15
|
||||
# Updated : 2026.02.16
|
||||
# Version : 1.1.5
|
||||
# GitHub : https://github.com/Sleeper85/esphome-yambms
|
||||
|
||||
@@ -48,53 +48,53 @@
|
||||
bms_id: '1' # must be a number
|
||||
bms_name: 'JK-BMS 1'
|
||||
bms_address: '0x01' # BMS 1 DIP switch
|
||||
bms_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable
|
||||
bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable
|
||||
# BMS 2
|
||||
- path: 'packages/bms/bms_combine_JK_RS485_Modbus_bms_standard.yaml'
|
||||
vars:
|
||||
bms_id: '2' # must be a number
|
||||
bms_name: 'JK-BMS 2'
|
||||
bms_address: '0x02' # BMS 2 DIP switch
|
||||
bms_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable
|
||||
bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable
|
||||
# BMS 3
|
||||
- path: 'packages/bms/bms_combine_JK_RS485_Modbus_bms_standard.yaml'
|
||||
vars:
|
||||
bms_id: '3' # must be a number
|
||||
bms_name: 'JK-BMS 3'
|
||||
bms_address: '0x03' # BMS 3 DIP switch
|
||||
bms_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable
|
||||
bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable
|
||||
# BMS 4
|
||||
- path: 'packages/bms/bms_combine_JK_RS485_Modbus_bms_standard.yaml'
|
||||
vars:
|
||||
bms_id: '4' # must be a number
|
||||
bms_name: 'JK-BMS 4'
|
||||
bms_address: '0x04' # BMS 4 DIP switch
|
||||
bms_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable
|
||||
bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable
|
||||
# BMS 5
|
||||
- path: 'packages/bms/bms_combine_JK_RS485_Modbus_bms_standard.yaml'
|
||||
vars:
|
||||
bms_id: '5' # must be a number
|
||||
bms_name: 'JK-BMS 5'
|
||||
bms_address: '0x05' # BMS 5 DIP switch
|
||||
bms_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable
|
||||
bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable
|
||||
# BMS 6
|
||||
- path: 'packages/bms/bms_combine_JK_RS485_Modbus_bms_standard.yaml'
|
||||
vars:
|
||||
bms_id: '6' # must be a number
|
||||
bms_name: 'JK-BMS 6'
|
||||
bms_address: '0x06' # BMS 6 DIP switch
|
||||
bms_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable
|
||||
bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable
|
||||
# BMS 7
|
||||
- path: 'packages/bms/bms_combine_JK_RS485_Modbus_bms_standard.yaml'
|
||||
vars:
|
||||
bms_id: '7' # must be a number
|
||||
bms_name: 'JK-BMS 7'
|
||||
bms_address: '0x07' # BMS 7 DIP switch
|
||||
bms_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable
|
||||
bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable
|
||||
# BMS 8
|
||||
- path: 'packages/bms/bms_combine_JK_RS485_Modbus_bms_standard.yaml'
|
||||
vars:
|
||||
bms_id: '8' # must be a number
|
||||
bms_name: 'JK-BMS 8'
|
||||
bms_address: '0x08' # BMS 8 DIP switch
|
||||
bms_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable
|
||||
bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable
|
||||
@@ -1,4 +1,4 @@
|
||||
# Updated : 2026.02.15
|
||||
# Updated : 2026.02.16
|
||||
# Version : 1.1.3
|
||||
# GitHub : https://github.com/Sleeper85/esphome-yambms
|
||||
|
||||
@@ -41,7 +41,7 @@
|
||||
# Maximum cell charging cycles is used to calculate the battey SoH.
|
||||
# MB31=8000.0, LF280K v3=8000.0, LF280K v2=6000.0, LF280=3000.0 (decimal is required)
|
||||
bms_cell_max_cycles: '6000.0'
|
||||
bms_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable
|
||||
bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable
|
||||
# BMS 2
|
||||
- path: 'packages/bms/bms_combine_JK_BLE_standard.yaml'
|
||||
vars:
|
||||
@@ -52,4 +52,4 @@
|
||||
# Maximum cell charging cycles is used to calculate the battey SoH.
|
||||
# MB31=8000.0, LF280K v3=8000.0, LF280K v2=6000.0, LF280=3000.0 (decimal is required)
|
||||
bms_cell_max_cycles: '6000.0'
|
||||
bms_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable
|
||||
bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable
|
||||
@@ -1,4 +1,4 @@
|
||||
# Updated : 2026.02.15
|
||||
# Updated : 2026.02.16
|
||||
# Version : 1.1.3
|
||||
# GitHub : https://github.com/Sleeper85/esphome-yambms
|
||||
|
||||
@@ -40,7 +40,7 @@
|
||||
# Maximum cell charging cycles is used to calculate the battey SoH.
|
||||
# MB31=8000.0, LF280K v3=8000.0, LF280K v2=6000.0, LF280=3000.0 (decimal is required)
|
||||
bms_cell_max_cycles: '6000.0'
|
||||
bms_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable
|
||||
bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable
|
||||
# BMS 2
|
||||
- path: 'packages/bms/bms_combine_JK_UART_4G-GPS_full.yaml'
|
||||
vars:
|
||||
@@ -50,4 +50,4 @@
|
||||
# Maximum cell charging cycles is used to calculate the battey SoH.
|
||||
# MB31=8000.0, LF280K v3=8000.0, LF280K v2=6000.0, LF280=3000.0 (decimal is required)
|
||||
bms_cell_max_cycles: '6000.0'
|
||||
bms_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable
|
||||
bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable
|
||||
@@ -1,4 +1,4 @@
|
||||
# Updated : 2026.02.15
|
||||
# Updated : 2026.02.16
|
||||
# Version : 1.1.4
|
||||
# GitHub : https://github.com/Sleeper85/esphome-yambms
|
||||
|
||||
@@ -41,16 +41,16 @@
|
||||
vars:
|
||||
bms_id: '1' # BMS id and modbus address
|
||||
bms_name: 'PACE-BMS 1'
|
||||
bms_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable
|
||||
bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable
|
||||
# BMS 2
|
||||
- path: 'packages/bms/bms_combine_PACE_RS485_bms_full.yaml'
|
||||
vars:
|
||||
bms_id: '2' # BMS id and modbus address
|
||||
bms_name: 'PACE-BMS 2'
|
||||
bms_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable
|
||||
bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable
|
||||
# BMS 3
|
||||
- path: 'packages/bms/bms_combine_PACE_RS485_bms_full.yaml'
|
||||
vars:
|
||||
bms_id: '3' # BMS id and modbus address
|
||||
bms_name: 'PACE-BMS 3'
|
||||
bms_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable
|
||||
bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable
|
||||
@@ -1,4 +1,4 @@
|
||||
# Updated : 2026.02.15
|
||||
# Updated : 2026.02.16
|
||||
# Version : 1.1.5
|
||||
# GitHub : https://github.com/Sleeper85/esphome-yambms
|
||||
|
||||
@@ -51,7 +51,7 @@
|
||||
bms_cell_ovp: '3.650' # V. Used by 'Auto CCL' functions
|
||||
bms_cell_uvp: '2.800' # V. Used by 'Auto DCL' functions and to calculate maximum discharge voltage
|
||||
bms_balance_trigger_voltage: '0.010' # V. Used by 'Auto CVL' functions
|
||||
bms_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable
|
||||
bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable
|
||||
# BMS 2
|
||||
- path: 'packages/bms/bms_combine_SEPLOS_V1_V2_RS485_bms_full.yaml'
|
||||
vars:
|
||||
@@ -67,7 +67,7 @@
|
||||
bms_cell_ovp: '3.650' # V. Used by 'Auto CCL' functions
|
||||
bms_cell_uvp: '2.800' # V. Used by 'Auto DCL' functions and to calculate maximum discharge voltage
|
||||
bms_balance_trigger_voltage: '0.010' # V. Used by 'Auto CVL' functions
|
||||
bms_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable
|
||||
bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable
|
||||
# BMS 3
|
||||
- path: 'packages/bms/bms_combine_SEPLOS_V1_V2_RS485_bms_full.yaml'
|
||||
vars:
|
||||
@@ -83,4 +83,4 @@
|
||||
bms_cell_ovp: '3.650' # V. Used by 'Auto CCL' functions
|
||||
bms_cell_uvp: '2.800' # V. Used by 'Auto DCL' functions and to calculate maximum discharge voltage
|
||||
bms_balance_trigger_voltage: '0.010' # V. Used by 'Auto CVL' functions
|
||||
bms_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable
|
||||
bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable
|
||||
@@ -1,5 +1,5 @@
|
||||
# Updated : 2026.02.03
|
||||
# Version : 1.1.3
|
||||
# Updated : 2026.02.16
|
||||
# Version : 1.1.4
|
||||
# GitHub : https://github.com/Sleeper85/esphome-yambms
|
||||
|
||||
# YamBMS ( Yet another multi-BMS Merging Solution )
|
||||
@@ -19,17 +19,18 @@
|
||||
|
||||
############################ Remote Packages Example ###########################
|
||||
|
||||
# This is not a working YAML but just code ready to copy into your main YAML.
|
||||
# This is not a working YAML but just code ready to copy into
|
||||
# your main YAML below the `packages:` section.
|
||||
|
||||
# packages:
|
||||
# remote_packages:
|
||||
# url: https://github.com/Sleeper85/esphome-yambms
|
||||
# ref: main
|
||||
# refresh: 60s
|
||||
# files:
|
||||
|
||||
################################################################################
|
||||
|
||||
packages:
|
||||
|
||||
bms:
|
||||
url: https://github.com/Sleeper85/esphome-yambms
|
||||
ref: main
|
||||
refresh: 0s
|
||||
files:
|
||||
# Seplos Parser
|
||||
- path: 'packages/bms/bms_combine_SEPLOS_V3_RS485_modbus_sniffer.yaml'
|
||||
vars:
|
||||
@@ -38,41 +39,47 @@ packages:
|
||||
seplos_bms_count: '3' # Seplos V3 BMS count
|
||||
seplos_update_interval: '3' # # Time in seconds, update interval for all data points
|
||||
# BMS 1
|
||||
- path: 'packages/bms/bms_combine_SEPLOS_V3_RS485_sniffer_bms_full.yaml'
|
||||
- path: 'packages/bms/bms_combine_SEPLOS_V3_RS485_bms_full.yaml'
|
||||
vars:
|
||||
bms_id: '1'
|
||||
bms_prefix: 'bms0' # DON'T CHANGE THIS NAME !
|
||||
bms_name: 'SEPLOS-BMS 1'
|
||||
# Required settings cannot be retrieved from BMS
|
||||
# These values must match your BMS settings
|
||||
bms_max_charge_current: '100' # A. The maximum current your BMS can handle
|
||||
bms_max_discharge_current: '100' # A. The maximum current your BMS can handle
|
||||
# LFP values example
|
||||
bms_cell_ovp: '3.650' # V. Used by 'Auto CCL' functions
|
||||
bms_cell_uvp: '2.800' # V. Used by 'Auto DCL' functions and to calculate maximum discharge voltage
|
||||
bms_balance_trigger_voltage: '0.010' # V. Used by 'Auto CVL' functions
|
||||
bms_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable
|
||||
bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable
|
||||
# BMS 2
|
||||
- path: 'packages/bms/bms_combine_SEPLOS_V3_RS485_sniffer_bms_full.yaml'
|
||||
- path: 'packages/bms/bms_combine_SEPLOS_V3_RS485_bms_full.yaml'
|
||||
vars:
|
||||
bms_id: '2'
|
||||
bms_prefix: 'bms1' # DON'T CHANGE THIS NAME !
|
||||
bms_name: 'SEPLOS-BMS 2'
|
||||
# Required settings cannot be retrieved from BMS
|
||||
bms_max_charge_current: '100' # A. The maximum current your BMS can handle
|
||||
bms_max_discharge_current: '100' # A. The maximum current your BMS can handle
|
||||
# These values must match your BMS settings
|
||||
# LFP values example
|
||||
bms_cell_ovp: '3.650' # V. Used by 'Auto CCL' functions
|
||||
bms_cell_uvp: '2.800' # V. Used by 'Auto DCL' functions and to calculate maximum discharge voltage
|
||||
bms_balance_trigger_voltage: '0.010' # V. Used by 'Auto CVL' functions
|
||||
bms_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable
|
||||
bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable
|
||||
# BMS 3
|
||||
- path: 'packages/bms/bms_combine_SEPLOS_V3_RS485_sniffer_bms_full.yaml'
|
||||
- path: 'packages/bms/bms_combine_SEPLOS_V3_RS485_bms_full.yaml'
|
||||
vars:
|
||||
bms_id: '3'
|
||||
bms_prefix: 'bms2' # DON'T CHANGE THIS NAME !
|
||||
bms_name: 'SEPLOS-BMS 3'
|
||||
# Required settings cannot be retrieved from BMS
|
||||
bms_max_charge_current: '100' # A. The maximum current your BMS can handle
|
||||
bms_max_discharge_current: '100' # A. The maximum current your BMS can handle
|
||||
# These values must match your BMS settings
|
||||
# LFP values example
|
||||
bms_cell_ovp: '3.650' # V. Used by 'Auto CCL' functions
|
||||
bms_cell_uvp: '2.800' # V. Used by 'Auto DCL' functions and to calculate maximum discharge voltage
|
||||
bms_balance_trigger_voltage: '0.010' # V. Used by 'Auto CVL' functions
|
||||
bms_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable
|
||||
bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable
|
||||
@@ -1,4 +1,4 @@
|
||||
# Updated : 2026.02.15
|
||||
# Updated : 2026.02.16
|
||||
# Version : 1.1.1
|
||||
# GitHub : https://github.com/Sleeper85/esphome-yambms
|
||||
|
||||
@@ -43,14 +43,14 @@
|
||||
bms_id: '1' # must be a number
|
||||
bms_name: 'BASEN-BMS 1'
|
||||
bms_address: '0x01'
|
||||
bms_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable
|
||||
bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable
|
||||
# Basen module 2
|
||||
- path: 'packages/bms/bms_combine_BASEN_RS485_full.yaml'
|
||||
vars:
|
||||
bms_id: '2' # must be a number
|
||||
bms_name: 'BASEN-BMS 2'
|
||||
bms_address: '0x02'
|
||||
bms_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable
|
||||
bms_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable
|
||||
|
||||
# Balancer 1 linked to BMS 1
|
||||
- path: 'packages/balancer/balancer_sensors_JK_NEEY_BLE.yaml'
|
||||
@@ -58,7 +58,7 @@
|
||||
bms_id: '1' # must match the BMS ID
|
||||
balancer_name: 'Balancer 1'
|
||||
balancer_ble_mac_address: 11:22:33:44:55:66
|
||||
balancer_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable
|
||||
balancer_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable
|
||||
# Balancer 2 linked to BMS 2
|
||||
- path: 'packages/balancer/balancer_sensors_JK_NEEY_BLE.yaml'
|
||||
vars:
|
||||
|
||||
@@ -1,4 +1,4 @@
|
||||
# Updated : 2026.02.15
|
||||
# Updated : 2026.02.16
|
||||
# Version : 1.1.4
|
||||
# GitHub : https://github.com/Sleeper85/esphome-yambms
|
||||
|
||||
@@ -38,7 +38,7 @@
|
||||
shunt_id: '1' # must be a number
|
||||
shunt_name: 'Shunt 1'
|
||||
shunt_uart_id: 'uart_esp_1'
|
||||
shunt_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable
|
||||
shunt_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable
|
||||
# Optional: BMS IDs connected to this shunt
|
||||
# If provided, the shunt will only be used when all listed BMS are online
|
||||
# If not provided, the shunt will be used independently of the BMS online status
|
||||
@@ -51,7 +51,7 @@
|
||||
shunt_id: '1' # must be a number
|
||||
shunt_name: 'Shunt 1'
|
||||
shunt_uart_id: 'uart_esp_1'
|
||||
shunt_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable
|
||||
shunt_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable
|
||||
# Optional: BMS IDs connected to this shunt
|
||||
# If provided, the shunt will only be used when all listed BMS are online
|
||||
# If not provided, the shunt will be used independently of the BMS online status
|
||||
@@ -65,7 +65,7 @@
|
||||
shunt_name: 'Shunt 1'
|
||||
shunt_mac_address: '60:A4:23:91:8F:55' # Your MAC address
|
||||
shunt_encryption_key: '0df4d0395b7d1a876c0c33ecb9e70dcd' # Your encryption key
|
||||
shunt_status_led_id: 'esp_light' # led used to show status. Default = esp_light, comment out to disable
|
||||
shunt_status_led_id: 'esp_light' # LED used to show status; default = esp_light, comment out to disable
|
||||
# Optional: BMS IDs connected to this shunt
|
||||
# If provided, the shunt will only be used when all listed BMS are online
|
||||
# If not provided, the shunt will be used independently of the BMS online status
|
||||
|
||||
Reference in new issue
Block a user