Files
Sleeper85 58c03ac83f Packages: Declare each CAN node in the package that consumes it
yambms_canbus.yaml and the Deye top packages now import their node from
canbus_platform (esp32_can, mcp2515 or external). canbus_bitrate replaces
esp32_canbus_bitrate and mcp2515_canbus_bitrate. Breaking change.
2026-11-08 23:08:34 +01:00

84 lines
4.0 KiB
Markdown

# Project structure
YamBMS is a set of **ESPHome YAML packages** — there is no compiled application code beyond a few
embedded C++ lambdas. It merges data from several BMS / Shunt / Balancer units and drives an
inverter over CAN or RS485 (PYLON / SMA / Victron / LuxPower). All the logic lives in YAML
(`substitutions`, `packages: !include`, `lambda:`) and is assembled by the ESPHome compiler.
## Entry points
- **`YamBMS_LP_*.yaml`** — *Local Packages*. Requires the `packages/` folder to be present
locally.
- **`YamBMS_RP_*.yaml`** — *Remote Packages*. Pulls the packages from GitHub (`!include` on a
`github://` URL). This is what most users run.
Differences and structure are detailed in [YamBMS_LP_YAML.md](../YamBMS_LP_YAML.md) and
[YamBMS_RP_YAML.md](../YamBMS_RP_YAML.md).
- **`YamBMS_Local_Packages_example.yaml`** / **`YamBMS_Remote_Packages_example.yaml`** — starting
templates.
- **`yambms_config.yaml`** — Modbus substitutions shared between several nodes in a multi-node
setup.
- **`yambms_custom.yaml`** — snippets meant to be copy-pasted into the main YAML (extra switches
and services). Not included by default.
- **`examples/single-node/`** and **`examples/multi-node/`** — ready-to-copy `!include` blocks for
a given BMS, Shunt or Balancer.
## The `packages/` tree
### `base/`
Generic device building block: ESPHome core, WiFi, Ethernet, `sub_device` declarations, the fault
registry (`device_base_fault_registry.yaml`), memory and PSRAM debug helpers.
### `board/`
One file per board (`board_ESP32-S3_*.yaml`) defining pins and GPIO. The `board_options_*.yaml`
files are optional building blocks — CAN, PSRAM, LVGL display, WiFi AP — included separately
depending on the hardware.
The `board_options_itf_uart_*.yaml` files are the exception: they are not included from the main
YAML. Each one declares a single UART (`uart_esp_N`, `uart_N` on the RPi Pico, `uart_spi_N` and
`uart_i2c_N` on a WK2168) and is imported by the package that consumes that UART, from its
`*_uart_id` var. A WK2168 only needs `board_options_itf_wk2168_spi.yaml` or
`board_options_itf_wk2168_i2c.yaml` in the main YAML, which declares the bridges.
The `board_options_itf_canbus_*.yaml` files follow the same rule: `yambms_canbus.yaml` and the
Deye top packages import the one named by their `canbus_platform` var (`esp32_can`, `mcp2515`, or
`external` for a node declared elsewhere).
### `bms/`, `shunt/`, `balancer/`
All three follow the same layered scheme, per brand and protocol:
| File pattern | Role |
|---|---|
| `*_combine_<Brand>_<Interface>_<variant>.yaml` | The file you include from your main YAML. Assembles the layers below. |
| `*_modbus_<Brand>_*.yaml` | Modbus register mapping (RS485/Modbus BMS only). |
| `*_sensors_<Brand>_*.yaml` | Declaration of the exposed ESPHome entities. |
| `*_errors_bitmask_<Brand>.yaml` | Alarm bit mapping. |
| `*_base*.yaml` | Brand-agnostic shared logic: combining engine, SoC/SoH, cycles, LED. |
### `yambms/`
The central engine. `yambms.yaml` aggregates `yambms_brand_registry.yaml`,
`yambms_core.yaml`, the `yambms_auto_*.yaml` functions (CVL / CCL / DCL / Float / EOC /
temperature / SoC limit) and `yambms_service.yaml`, then `yambms_canbus*.yaml` or
`yambms_rs485*.yaml` for the link to the inverter.
`yambms_brand_registry.yaml` holds the protocol dictionary (`YB_PROTO_*`), the brand to
protocol mapping and the per-couple battery mode and note. Both inverter buses read it.
On the RS485 side, `yambms_rs485.yaml` is the entry point — selects, diagnostics, telemetry
slot — and it includes the protocol implementation, currently `yambms_rs485_pylon.yaml`.
## Where the behaviour is documented
The structure above tells you where code lives, not what it does. For the charging logic and the
auto functions, read:
- [Charging_logic.md](../Charging_logic.md)
- [YamBMS_functions.md](../YamBMS_functions.md)
- [YamBMS_behavior.md](../YamBMS_behavior.md)
- [Supported_devices.md](../Supported_devices.md) — supported BMS, shunts and inverters.